High Power Density Research Articles

Review on Biomass Derived Activated Carbons as Electrochemical Electrode Material for Supercapacitor Device

Abstract: To face the challenge of the finite nature of fossil fuels and large energy crises across the globe, there is an urgent requirement for sustainable and renewable energy sources. Moreover, it is essential to focus on energy storage in order to meet the demand of future generations. Among various energy storage devices such as fuel cells, batteries, capacitors, supercapacitors, flywheels, etc., it is the supercapacitor device that has elicited extensive research interest recently because of prominent features like high power density, fast recharge capability, and long cycle life. The main objective of this article is to review the enhancement of the electrochemical performance of supercapacitor devices. The electrochemical properties of the supercapacitor device majorly depend on the electrode materials used, which include carbonaceous materials, metal oxides, and conducting polymers. In order to reduce energy shortages and environmental pressure, carbon materials derived from biomass/waste materials have been considered remarkable candidates for electrode materials with the advantages of high abundance, low cost, and environmental friendliness. This review shows the complied study of various methodologies for the preparation of activated carbons derived from different biomass residues such as plants, animals, and microorganisms, which have been investigated in the past few years as electrochemical electrode materials for supercapacitors. Further, ongoing challenges and potential improvements in this area for creating efficient energy storage devices are also discussed. The goal of this review article is to aid in the creation of new insights for energy storage applications of biomass-generated carbons that will lead to sustainable energy development.

Fine and dense bismuth electrocatalysts achieving high power density and cycling stability in vanadium flow batteries

Developing electrode materials that can work efficiently at high current densities while maintaining excellent stability is critical for reducing the unit cost of vanadium flow batteries (VFB). Herein, we report a Bi nanoparticles (∼10 nm) decorated thermal-active graphite felt (Bi@TGF) electrode fabricated through a simple polyvinylpyrrolidone guided approach. Fine and dense Bi electrocatalysts not only play an important role in catalyzing V2+/V3+ redox reaction, but also effectively suppress hydrogen evolution side reaction. As a result, the VFB assembled with Bi@TGF as negative electrode exhibits excellent rate performance (energy efficiency of 81.5 % at 200 mA cm−2) and extremely high peak power density (1023 mW cm−2 at 1250 mA cm−2). Moreover, Bi@TGF electrode demonstrates outstanding durability in 2500-cycle ultralong charge-discharge testing at 300 mA cm−2, with energy (voltage) efficiency retention rate of 99.2 % (98.9 %). The stable cycling ability of Bi@TGF under high operating current density endows its potential application in long-duration and high power density VFB.

Anode-Free Aqueous Aluminum Ion Batteries.

Aqueous aluminum ion batteries (AAIBs) possess the advantages of high safety, cost-effectiveness, eco-friendliness and high theoretical capacity. However, the Al2O3 film on the Al anode surface, a natural physical barrier to the plating of hydrated aluminum ions, is a key factor in the decomposition of the aqueous electrolyte and the severe hydrogen precipitation reaction. To circumvent the obnoxious Al anode, a proof-of-concept of an anode-free AAIB is first proposed, in which Al2TiO5, as a cathode pre-aluminum additive (Al source), can replenish Al loss by over cycling. The Al-Cu alloy layer, formed by plating Al on the Cu foil surface during the charge process, possesses a reversible electrochemical property and is paired with a polyaniline (cathode) to stimulate the battery to exhibit high initial discharge capacity (175 mAh g-1), high power density (≈410Wh L-1) and ultra-long cycle life (4000 cycles) with the capacity retention of ≈60% after 1000 cycles. This work will act as a primer to ignite the enormous prospective researches on the anode-free aqueous Al ion batteries.

Broadband and ascendant nonlinear optical properties of the wide bandgap material GaN nanowires

Gallium nitride (GaN) nanowire, as a type of wide bandgap nanomaterial, has attracted considerable interest because of its outstanding physicochemical properties and applications in energy storage and photoelectric devices. In this study, we prepared GaN nanowires via a facile chemical vapor deposition method and investigated their nonlinear absorption responses ranging from ultraviolet to near-infrared in the z-scan technology under irradiation by picosecond laser pulses. The experiment revealed that GaN nanowires exhibit remarkable nonlinear absorption characteristics attributed to their wide bandgap and nanostructure, including saturable absorption and reverse saturable absorption. When compared to bulk GaN crystals, the nanowires provide a richer and more potent set of nonlinear optical effects. Furthermore, we conducted an analysis of the corresponding electronic transition processes associated with photon absorption. Under high peak power density laser excitation, two-photon absorption or three-photon absorption dominate, with maximum modulation depths of 73.6%, 74.9%, 63.1% and 64.3% at 266 nm, 355 nm, 532 nm, and 1064 nm, respectively, corresponding to absorption coefficients of 0.22 cm/GW, 0.28 cm/GW, 0.08 cm/GW, and 2.82 ×10−4 cm3/GW2. At lower peak energy densities, GaN nanowires demonstrate rare and excellent saturation absorption characteristics at wavelength of 355 nm due to interband transitions, while saturable absorption is also observed at 532 nm and 1064 nm due to band tail absorption. The modulation depths are 85.2%, 41.9%, and 13.7% for 355 nm, 532 nm, and 1064 nm, corresponding to saturation intensities of 3.39 GW/cm2, 5.58 GW/cm2 and 14.13 GW/cm2. This indicates that GaN nanowires can be utilized as broadband optical limiters and high-performance pulse laser modulating devices, particularly for scarce ultraviolet optical limiters, and saturable absorbers for ultraviolet and visible lasers. Furthermore, our study demonstrates the application potential of wide bandgap nanomaterials in nonlinear optical devices.

NiC2O4 nanorods embellished NiCo layered double hydroxide nanoflowers with enhanced electrochemical performances for hybrid supercapacitor

Designing and constructing a high performance and multi-component nickel-based material is preferable for efficient energy storage devices. In this study, we reasonably designed a composite material, NiC2O4/NiCo layered double hydroxide (LDH), composed of 1D NiC2O4 nanorods and 3D NiCo-LDH nanoflowers self-assembled from nanosheets via a hydrothermal method. This causes NiCo-LDH nanoflowers to stretch out, increasing the specific surface area (up to 47 m2 g−1), improving contact with the electrolyte and providing abundant active sites, speeding up the transfer of protons. The excellent double redox reactions of NiC2O4 and NiCo-LDH expedite the reaction kinetics and boost electrochemical activities, resulting in high energy densities of 37.6 Wh kg−1 and high power densities of 809.8 W kg−1 for the NiC2O4/NiCo-LDH||AC hybrid supercapacitor devices. Furthermore, DFT calculations indicate NiC2O4/NiCo-LDH enhance the adsorption ability of OH−. And the improved electrochemical performance of NiC2O4/NiCo-LDH is due to partial electrons transfer through the interface.

Recent progress in metal oxide-based electrode materials for safe and sustainable variants of supercapacitors

A significant amount of energy can be produced using renewable energy sources; however, storing massive amounts of energy poses a substantial obstacle to energy production. Economic crisis has led to rapid developments in electrochemical (EC) energy storage devices (EESDs), especially rechargeable batteries, fuel cells, and supercapacitors (SCs), which are effective for energy storage systems. Researchers have lately suggested that among the various EESDs, the SC is an effective alternate for energy storage due to the presence of the following characteristics: SCs offer high-power density (PD), improvable energy density (ED), fast charging/discharging, and good cyclic stability. This review highlighted and analyzed the concepts of supercapacitors and types of supercapacitors on the basis of electrode materials, highlighted the several feasible synthesis processes for preparation of metal oxide (MO) nanoparticles, and discussed the morphological effects of MOs on the electrochemical performance of the devices. In this review, we primarily focus on pseudo-capacitors for SCs, which mainly contain MOs and their composite materials, and also highlight their future possibilities as a useful application of MO-based materials in supercapacitors. The novelty of MO’s electrode materials is primarily due to the presence of synergistic effects in the hybrid materials, rich redox activity, excellent conductivity, and chemical stability, making them excellent for SC applications.

SPEED: an integrated, smartphone-operated, handheld digital PCR Device for point-of-care testing

This study elaborates on the design, fabrication, and data analysis details of SPEED, a recently proposed smartphone-based digital polymerase chain reaction (dPCR) device. The dPCR chips incorporate partition diameters ranging from 50 μm to 5 μm, and these partitions are organized into six distinct blocks to facilitate image processing. Due to the superior thermal conductivity of Si and its potential for mass production, the dPCR chips were fabricated on a Si substrate. A temperature control system based on a high-power density Peltier element and a preheating/cooling PCR protocol user interface shortening the thermal cycle time. The optical design employs four 470 nm light-emitting diodes as light sources, with filters and mirrors effectively managing the light emitted during PCR. An algorithm is utilized for image processing and illumination nonuniformity correction including conversion to a monochromatic format, partition identification, skew correction, and the generation of an image correction mask. We validated the device using a range of deoxyribonucleic acid targets, demonstrating its potential applicability across multiple fields. Therefore, we provide guidance and verification of the design and testing of the recently proposed SPEED device.

Atomically dispersed Iridium on Mo2C as an efficient and stable alkaline hydrogen oxidation reaction catalyst

Hydroxide exchange membrane fuel cells (HEMFCs) have the advantages of using cost-effective materials, but hindered by the sluggish anodic hydrogen oxidation reaction (HOR) kinetics. Here, we report an atomically dispersed Ir on Mo2C nanoparticles supported on carbon (IrSA-Mo2C/C) as highly active and stable HOR catalysts. The specific exchange current density of IrSA-Mo2C/C is 4.1 mA cm−2ECSA, which is 10 times that of Ir/C. Negligible decay is observed after 30,000-cycle accelerated stability test. Theoretical calculations suggest the high HOR activity is attributed to the unique Mo2C substrate, which makes the Ir sites with optimized H binding and also provides enhanced OH binding sites. By using a low loading (0.05 mgIr cm−2) of IrSA-Mo2C/C as anode, the fabricated HEMFC can deliver a high peak power density of 1.64 W cm−2. This work illustrates that atomically dispersed precious metal on carbides may be a promising strategy for high performance HEMFCs.

Research on the kinetics characteristics and in-cylinder combustion of opposed rotary piston engine for different power output modes

As a new type of internal combustion engine, opposed rotary piston (ORP) engine has the advantages of simple structure and high working frequency, and can achieve high power density. Consequently, it stands as an ideal power source for hybrid power systems and unmanned aerial vehicles. The ORP engine has different power output modes, corresponding to different piston rotation and volume evolutions of combustion chamber. However, the effect of power output modes on kinetics characteristics and in-cylinder combustion of ORP engines are still uncovered. In this paper, the kinematic model of an ORP engine is established for scenarios involving power output by different shafts (Shaft 1 and Shaft 3). Meanwhile, the piston rotation patterns and cylinder volume variations are investigated correspondingly. Further, three-dimensional numerical model of the ORP engine is established, enabling analysis of in-cylinder combustion characteristics, engine performance, as well as nitrogen oxides (NOx) emissions. The results indicate that the volume variations of all cylinders follow a consistent pattern under the power output by Shaft 3. A pair of opposed cylinders features longer durations of intake and expansion strokes, and shorter durations of compression and exhaust strokes, the other pair of combustion chambers is the opposite under the power output by Shaft 1. The engine demonstrates a charging efficiency of 95.36 %, with corresponding indicated thermal efficiency and indicated power output of 38.08 % and 40.9 kW, respectively. The two adjacent cylinders present significantly different operation processes in the case of the power output by Shaft 1, achieving charging efficiencies of 94.29 % and 89.11 %, respectively, with the indicated thermal efficiency of 34.49 % and 31.60 %. The corresponding minimum indicated specific fuel consumption under the two power output modes are 211.7 g/kW∙h and 243.7 g/kW∙h, respectively, accompanied by NOx emission factors of 25.3 g/kW∙h and 17.6 g/kW∙h. With the given range of ignition timing, a trade-off relationship exists between the engine performance and NOx emissions. The power density of the case of power output by Shaft 3 is superior to that of Shaft 1.

Performance Analysis of Liquid-to-Air Heat Exchanger of High-Power Density Racks

Abstract The ability of traditional room-conditioning systems to accommodate expanding information technology loads is limited in contemporary data centers, where the storage, storing, and processing of data have grown quickly as a result of evolving technological trends and rising demand for online services, which has led to an increase in the amount of waste heat generated by IT equipment. Through the implementation of hybrid air and liquid cooling technologies, targeted, on-demand cooling is made possible by employing various techniques, which include but are not limited to in-row, overhead, and rear door heat exchanger cooling systems. One of the liquid cooling techniques will be examined in this study based on different conditions for high-power density racks (+50 kW). This paper investigates the cooling performance of a liquid-to-air in-row CDU in a test rack containing seven thermal test vehicles under various conditions, focusing on cooling capacity and HX effectiveness under different supply air temperatures. This test rig has the necessary instruments to monitor and analyze the experiments on both the liquid and the air sides. Moreover, another experiment is conducted to assess the performance of the CDU that runs under different control fan schemes, as well as how the change of the control type will affect the supply fluid temperature and the TTV case temperatures at 10%, 50%, and 100% of the total power. Finally, suggestions for the best control fan scheme to use for these units are provided at the conclusion of the study.

Dynamically stable radiation pressure propulsion of flexible lightsails for interstellar exploration

Meter-scale, submicron-thick lightsail spacecraft, propelled to relativistic velocities via photon pressure using high-power density laser radiation, offer a potentially new route to space exploration within and beyond the solar system, posing substantial challenges for materials science and engineering. We analyze the structural and photonic design of flexible lightsails by developing a mesh-based multiphysics simulator based on linear elastic theory. We observe spin-stabilized flexible lightsail shapes and designs that are immune to shape collapse during acceleration and exhibit beam-riding stability despite deformations caused by photon pressure and thermal expansion. Excitingly, nanophotonic lightsails based on planar silicon nitride membranes patterned with suitable optical metagratings exhibit both mechanically and dynamically stable propulsion along the pump laser axis. These advances suggest that laser-driven acceleration of membrane-like lightsails to the relativistic speeds needed to access interstellar distances is conceptually feasible, and that their fabrication could be achieved by scaling up modern microfabrication technology.

Seamless multi‐mode switching controller of four‐switch buck–boost converter based on integrated natural trajectory method

SummaryWith the characteristics of high efficiency and high power density, the four switch buck–boost (FSBB) converter is widely used in electric vehicles, direct current microgrids, and so forth. However, how to achieve smooth switching between different modes of FSBB has always been a hot issue in the theoretical and engineering fields. In this paper, considering the dynamic performance and output voltage or inductance current deviation, a control algorithm with integrated natural trajectory method is designed to realize the switching of different modes of FSBB converter. The proposed control algorithm is based on the theory of large signal natural locus and average natural locus. The normalized phase locus of inductance current and output voltage divides the phase plane into five regions and performs large signal or average switching operations in different regions. Theoretical analysis shows that the proposed control algorithm can achieve the balance between the dynamic performance and output voltage or inductance current deviation of FSBB converter in different mode switching. Finally, the performance of the proposed control algorithm is verified by experiments results.

Application of supramolecular hydrogel in supercapacitors: Opportunities and challenges

AbstractSupercapacitors (SCs) are studied and used in various fields due to their high power density, fast charging/discharging rate, as well as long cycle life. Compared to other traditional electrode and electrolyte materials, supramolecular hydrogels have great advantages in the application of SCs due to their excellent properties. Unlike covalent bonds, supramolecular systems are assembled through dynamic reversible bonds, including host–guest interactions, ion interactions, electrostatic interactions, hydrogen bonding, coordination interactions, etc. The resulting supramolecular hydrogels show some special functions, such as stretching, compression, adhesion, self‐healing, stimulus responsiveness, etc., making them strong candidates for the next generation of energy storage devices. This paper reviews the representative progress of electrodes, electrolytes, and SCs based on supramolecular hydrogels. Besides, the properties of supramolecular hydrogels, such as conductivity, extensibility, compressibility and elasticity, self‐healing, frost resistance, adhesion, and flexibility, are also reviewed to highlight the key role of excellent properties of hydrogel materials in SCs. In addition, this article also discusses the challenges faced by current technologies, hoping to continue promoting future research in this field.

Cyanogel-Induced Facile Synthesis of Palladium Hydride for Electrocatalytic Oxygen Reduction.

Palladium hydride (PdHx) is one of the well-known electrocatalytic materials, yet its synthesis is still a challenge through an energy-efficient and straightforward method. Herein, we propose a new and facile cyanogel-assisted synthesis strategy for the preparation of PdH0.649 at a mild environment with NaBH4 as the hydrogen source. Unlike traditional inorganic Pd precursors, the unique Pd-CN-Pd bridge in Pdx[Pd(CN)4]y·aH2O cyanogel offers more favourable spatial sites for insertion of H atoms. The characteristic three-dimensional backbone of cyanogel also acts as a support scaffold resulting in the interconnected network structure of PdH0.649. Due to the incorporation of H atoms and interconnected network structure, the PdH0.649 achieves a high half-wave potential of 0.932 V, a high onset potential of 1.062 V, and a low activation energy, as well as a long-term lifetime for oxygen reduction reaction. Theoretical calculation demonstrates a downshift of the d-band centre of Pd in PdH0.649 owing to the dominant Pd-H incorporation that weakens the binding energies of the *OH intermediate species. Zn-air batteries (ZAB) based on PdH0.649 exhibits high power density, competitive open circuit voltage, and good stability, exceeding that of commercial Pt black.

N‐Doped Carbon Nanofibers and Carbon Nanotubes‐Encapsulated CoNi Alloy as Highly Active Oxygen Reduction Catalysts for Direct Methanol Fuel Cells

The slow oxygen reduction kinetics of direct methanol fuel cell (DMFCs) are one of the limiting factors affecting its application. Therefore, exploring nonprecious catalysts with high activity and methanol resistance is urgently needed. Herein, zeolitic imidazolate framework‐8 particles are first blended with different proportions of metal salts (Ni as well as Co) and further electrospun to obtain a nanofiber precursor. After pyrolysis treatment, a composite catalyst (CoNi@N‐CNFs) with a highly dispersed CoNi alloy phase supported by porous N‐doped carbon nanofiber and carbon nanotube is prepared. The surface electronic structure can be reasonably adjusted by optimizing the doping ratio of Ni and Co. The CoNi@N‐CNFs shows high oxygen reduction activity and methanol resistance. Half‐wave potential and the onset potential of Co1Ni1@N‐CNFs (Co: Ni mole ratio = 1:1) are 0.79 and 0.87 V. Additionally, Co1Ni1@N‐CNF‐modified DMFC endows a high power density (24.07 mW cm−2), which is close to Pt/C‐based DMFC (27.59 mW cm−2). Rich active sites, large specific surface area, and synergy between CoNi alloy and N configuration of CoNi@N‐CNFs effectively accelerate electron transfer, resulting in the superior catalytic activity. This work provides a new strategy to design effective 1D oxygen reduction reaction catalysts in fuel cells.

State-of-the-Art Lightweight Implementation Methods in Electrical Machines

The demand for high-power density motors has been increasing due to their remarkable output capability and compact construction. To achieve a significant improvement in motor power density, lightweight design methods have been recognized as an effective enabler. Therefore, extensive investigations have been conducted to reduce motor mass and achieve lightweight configurations through the exploration of lightweight materials, structures and manufacturing techniques. This article provides a comprehensive review and summary of state-of-the-art lightweight implementation methods for electrical machines, including the utilization of lightweight materials, structural lightweight design, and incorporation of advanced manufacturing technologies, such as additive manufacturing techniques. The advantages and limitations of each approach are also discussed in this paper. Furthermore, some comments and forecasts on potential future methodologies for motor lightweighting are also provided.

An anode-free sodium dual-ion battery

Batteries with both high energy and power densities are desired for practical applications. Constructing anode-free batteries is effective to achieve high energy density, yet remains highly challenging to obtain high power density simultaneously. To overcome this dilemma, dual-ion storage strategy is introduced to anode-free battery. As a proof of concept, an anode-free sodium dual-ion battery (AFSDIB) with combined high energy and power densities is successfully fabricated. Plasma-treated current collector (Al/N-C) exhibits a sodiophilic N-doped carbon surface, enabling highly reversible Na plating/stripping at high current densities. Meanwhile, the sluggish desolvation process is intrinsically eliminated at the polytriphenylamine (PTPAn) cathodic side owing to the solvation-free anion storage chemistry. Consequently, the assembled Al/N-C||PTPAn AFSDIB exhibits a remarkable energy density over 380 Wh kg−1 (at 375 W kg−1) and power density above 1800 W kg−1 (at 302 Wh kg−1) based on active materials and consumed electrolyte, which is superior to the reported state-of-the-art anode-free and dual-ion sodium batteries. This work paves a new pathway for developing batteries with both high energy and power densities.

Overvoltage Avoidance Control Strategy for Braking Process of Brushless DC Motor Drives with Small DC-Link Capacitance

Single-phase input rectifier brushless DC motor drives with a small film capacitor have many advantages, such as high power density and high reliability. However, when the motor system operates in regenerative braking mode, the dc-link capacitor with reduced capacitance may suffer from overvoltage without adding additional hardware circuits. At the same time, the braking torque control of the motor will be affected by speed variations. In order to ensure smooth and reliable operation of the motor system, an anti-overvoltage braking torque control method is proposed in this article. The relationship among the dc-link capacitance, the dc-link capacitor voltage, and the speed during regenerative braking is analyzed quantitatively, and the speed at which the regenerative braking is switched to the plug braking is obtained, which in turn consumes the capacitor energy to avoid dc-link overvoltage. Additionally, based on the relationship between the controllability of the braking torque and the speed, a reference value of the braking current that matches the speed is designed. The proposed method makes use of the capacitor’s energy storage during regenerative braking. Meanwhile, it mitigates the impact of motor speed on braking torque. Finally, the effectiveness of the proposed method is verified on a motor platform equipped with the dc-link film capacitor.

Nanostructured binary transition-metal-sulfides and nanocomposites as high-performance electrodes for hybrid supercapacitors

Supercapacitors (SCs) are attractive as promising energy storage devices because of their distinctive attributes, such as high power density, good current charge/discharge ability, excellent cyclic stability, reasonable safety, and low cost. Electrode materials play key roles in achieving excellent performance of these SCs. Among them, binary transition metal sulfides (BTMSs) have received significant attention, attributed to their high conductivity, abundant active sites, and excellent electrochemical properties. This topic review aims to summarize recent advances in principles, design, and evaluation of the electrochemical performance for nanostructured BTMSs (including nickel–cobalt sulfides, zinc–cobalt sulfides, and copper–cobalt sulfides.) and their nanocomposites (including those carbon nanomaterials, transition metal oxides, binary transition metal oxides, transition metal sulfides, and polymers). Nanostructuring of these BTMSs and nanocomposites as well as their effects on the performance were discussed, including nanoparticles, nanospheres, nanosheets, nanowires, nanorods, nanotubes, nanoarrays, and hierarchitectured nanostructures. Their electrochemical performance has further been reviewed including specific capacitance, conductivity, rate capability, and cycling stability. In addition, the performance of hybrid supercapacitors (HSCs) assembled using the nanostructured BTMSs as the cathodes also have been summarized and compared. Finally, challenges and further prospects in the HSCs-based BTMS electrodes are presented.

Understanding of multi-way heat extraction using peripheral diamond in AlGaN/GaN HEMT by electrothermal simulations

Abstract High power operation of high electron mobility transistors (HEMTs) is limited due to a variety of thermal resistances in the HEMT device causing self-heating effects (SHEs) in the device. To reduce the SHEs, diamond heat spreaders integrated to the device have proven efficient for heat extraction from the device. In this report using electro-thermal TCAD simulations, we demonstrate an understanding of multiway heat extraction utilizing diamond heat spreaders for improving HEMT thermal performance at high DC output power density
(~40 W/mm). The impact of each heat extraction pathway is understood while considering the thermal boundary resistance between Diamond/GaN hetero-interface and optimization of the GaN buffer layer thickness. Using these findings, we simulated an AlGaN/GaN HEMT device operating at 40 W/mm DC output power while maintaining device temperature at approximately 470 - 500 K.