High Renewable Penetration Research Articles

A Review of Reliability Research in Regional Integrated Energy System: Indicator, Modeling, and Assessment Methods

The increasing complexity of integrated energy systems has made reliability assessment a critical challenge. This paper presents a comprehensive review of reliability assessment in Regional Integrated Energy Systems (RIES), focusing on key aspects such as reliability indicators, modeling approaches, and evaluation techniques. This study highlights the role of renewable energy sources and examines the coupling relationships within RIES. Energy hub models and complex network theory are identified as significant in RIES modeling, while probabilistic load flow analysis shows promise in handling renewable energy uncertainties. This paper also explores the potential of machine learning methods and multi-objective optimization approaches in enhancing system reliability. By proposing an integrated assessment framework, this study addresses this research gap in reliability evaluation under high renewable energy penetration scenarios. The findings contribute to the advancement of reliability assessment methodologies for integrated energy systems, supporting the development of more resilient and sustainable energy infrastructures.

Dynamic control of grid-following inverters using DC bus controller and power-sharing participating factors for improved stability

Integrating Grid-Following Inverters (GFLs) into power systems presents significant stability challenges, particularly in systems with reduced strength and high renewable energy penetration. This study delves into the dynamic interactions between parallel synchronous generators (SGs) and GFLs, highlighting the impact of reduced system inertia and transient stability margins. A novel DC bus controller is proposed to enhance the inertia and stability of GFLs during grid disturbances by dynamically adjusting power references based on load demand. Through mathematical modelling, small signal analysis, and MATLAB simulations, the study evaluates the effects of inverter-based resources (IBRs) on power system stability. The proposed GFL configuration demonstrates improved stability control, achieving an 80 % increase in stability under weak grid conditions. This paper provides insights into optimized control strategies, emphasizing the importance of power-sharing participation factors (PSPF) for effective GFL integration in modern power systems with high renewable energy penetration.

A two-layer strategy for sustainable energy management of microgrid clusters with embedded energy storage system and demand-side flexibility provision

The intermittent nature of renewable energy generation and the fluctuating demands pose persistent challenges in microgrid operations. In response, stakeholders and operators have turned to clustering the geographically adjacent microgrids as a solution. In this context, this paper introduces a novel two-layer energy management strategy for microgrid clusters, utilizing demand-side flexibility and the capabilities of shared battery energy storage (SBES) to minimize operational costs and emissions, while ensuring a spinning reserve within individual microgrids to prevent load-shedding. In the lower layer, the proposed approach devises optimal day-ahead operation policies, while the upper layer employs a cooperative strategy to further optimize the operational efficiency across the entire cluster. The energy management problem is accurately formulated as a mixed integer quadratic programming (MIQP) optimization, which incorporates linear terms in the problem's constraints. The formulation accounts for operational costs associated with SBES including expenses of charging/discharging and changes in operating states (CiOS). Real-world case studies with a cluster of three microgrids in Australia validate the effectiveness of this approach. Results show a reduction in operational costs for the base case scenario by 6.96 % compared to conventional microgrid management strategies. Sensitivity analyses further demonstrate the economic benefits of varying SBES capacity and flexibility pricing, with savings ranging from 6.5 % to 8.1 %. The proposed strategy also reduces CO2 emissions by up to 11.6 %, while improving system reliability. This strategy holds promise for integration into distributed energy systems with high renewable penetration and clustered local grids, offering significant advantages for utility operators and end-users through improved energy efficiency and reduced emissions.

Online Evaluation for the POI-Level Inertial Support to the Grid via Ambient Measurements

As renewable energy sources like wind and solar power increasingly replace traditional energy sources and are integrated into the power grid, the issue of insufficient system inertia is becoming more apparent. This paper presents an online adaptive time window inertia constant identification method based on ambient measurements to identify the equivalent inertia constant of the time-varying inertia at Point of Interface (POI) level. The proposed method takes advantage of the online inertia estimation and the data-driven equivalent inertia constant identification techniques to simultaneously achieve online tracking and accuracy. With this regard, this paper first describes the inertia providers in modern system. Then, based on the frequency and power data measured by the Phasor Measurement Unit (PMU), this paper provides an improved data-driven equivalent inertia constant identification method. Subsequently, the paper proposes an ambient data smoothing method to cope with the numerical errors and provides, as a byproduct, an adaptive time window inertia constant identification. The adaptive time window is designed to enhance the accuracy of the method. Finally, the feasibility and accuracy of the proposed method of tracking synthetic inertia are validated by the simulation tests based on a grid in northwest China with high renewable energy penetration and a Virtual Power Plant (VPP). The experimental results show that the accuracy of this method is within 5%.

Energy management of hybrid AC/DC microgrid considering incentive‐based demand response program

AbstractIncreasing the use of renewable energy in microgrids (MGs) offers environmental and economic benefits. However, the unpredictable and intermittent nature of available resources poses challenges for optimal MG scheduling. Hybrid AC–DC microgrids provide a solution, seamlessly integrating renewables while reducing energy losses and improving power grid reliability. Additionally, incentive‐based demand response programs promote flexible energy consumption, further mitigating the variability of renewable generation and enhancing grid stability. This paper investigates the challenges and potential of high renewable penetration in hybrid AC–DC MGs, analysing the role of demand response programs in system optimization. The microgrid's energy management is modelled using MILP, while a Stackelberg game represents the demand response program. These models are integrated to optimize energy management and demand response jointly. Simulations demonstrate the cost‐saving benefits of this integrated framework, achieved through coordinated flexible resource scheduling and incentive‐based demand response programming.

A Study on the Critical Transmission Operating Constraint Forecasting(COCF) of Transmission Systems with High Renewable Resources Penetrations

A Study on the Critical Transmission Operating Constraint Forecasting(COCF) of Transmission Systems with High Renewable Resources Penetrations

Comparison of Different Power Generation Mixes for High Penetration of Renewables

Comparison of Different Power Generation Mixes for High Penetration of Renewables

A decentralized energy management scheme for a DC microgrid with correlated uncertainties and integrated demand response

Secure operation of a DC microgrid with high penetration of renewables and electric vehicle load is challenging. This paper proposes a decentralized energy management scheme for a grid-connected renewable integrated community DC microgrid considering the water-energy nexus. Uncertainties of renewable generation, plug-in electric vehicle load, electricity demand, electricity price in the day-ahead wholesale market, ambient temperature, and water demand are modelled using a probabilistic approach. Correlation between the input random variables is modelled using Copula theory. Flexibilities on the consumer side across multiple entities (temperature-dependent loads, electric vehicles, and water supply system storage) are coordinated to form an “integrated demand response entity”, which is further coordinated with the DC microgrid operator side flexibility (electrochemical storage) to support system operation. A distributed dynamic pricing scheme is used to implement the integrated demand response program. The objectives of the energy management scheme are to minimize the DC microgrid operator’s operating cost and consumers’ electricity cost. The decentralized algorithm is solved by the “alternating direction method of multipliers”. Simulation studies on a six-bus DC microgrid test system demonstrate that the proposed strategy reduces the operating cost of the DC microgrid operator by ∼19.28% and the electricity cost of the consumers by ∼13.82%.

Study on the Evolutionary Process and Balancing Mechanism of Net Load in Renewable Energy Power Systems

With the rapid development of renewable energy sources such as wind and solar, the net load characteristics of power systems have undergone fundamental changes. This paper defines quantitative analysis indicators for net load characteristics and examines how these characteristics evolve as the proportion of wind and solar energy increases. By identifying inflection points in the system’s adjustment capabilities, we categorize power systems into low, medium, and high renewable energy penetration. We then establish adjustment models that incorporate traditional coal power, hydropower, natural gas generation, adjustable loads, system interconnections, pumped-storage hydroelectricity, and new energy storage technologies. A genetic algorithm is employed to optimize and balance the net load curves under varying renewable energy proportions, analyzing the mechanism behind net load balance. A case study, based on real operational data from 2023 for a provincial power grid in western China, which is rich in renewable resources, conducts a quantitative analysis of the system’s adjustment capability inflection point and net load balancing strategies. The results demonstrate that the proposed method effectively captures the evolution of the system’s net load and reveals the mechanisms of net load balancing under different renewable energy penetration levels.

Multi-objective coordinated optimization of low-carbon building energy systems based on high renewable energy penetration

In the context of China's targets to achieve a "carbon peak" by 2030 and "carbon neutrality" by 2060, the operation and maintenance of buildings with low-carbon and zero-energy consumption emerge as a critical technology for accomplishing the "dual carbon" goals in the building sector. As a novel energy supply system, low-carbon building energy systems can provide low-carbon, efficient, and economical energy supplies. Accordingly, this paper initially constructs a low-carbon building energy system based on a high penetration of renewable energy sources. Subsequently, considering the benefits of economic efficiency, carbon emissions, and renewable energy utilization, a multi-objective cooperative optimization model for low-carbon building energy systems with high renewable energy penetration is established. Finally, a multi-objective particle swarm optimization algorithm is applied to solve the model, and the system is studied and analyzed using a large domestic park as a case study. The results indicate that the low-carbon building energy system with high renewable energy integration, aiming for economic efficiency, carbon reduction, and increased renewable energy consumption, achieves supply energy costs of $ 19.2/m2 and carbon emissions of 49.1 kg/m2. These values represent reductions of $ 7.4/m2 and 60.9 kg/m2 compared to separate supply systems. Lastly, the study of the low-carbon building energy system provides theoretical references for renewable energy integration and energy transition in the building sector.

A probabilistic model for real-time quantification of building energy flexibility

Buildings have great energy flexibility potential to manage supply-demand imbalance in power grids with high renewable penetration. Accurate and real-time quantification of building energy flexibility is essential not only for engaging buildings in electricity and grid service markets, but also for ensuring the reliable and optimal operation of power grids. This paper proposes a probabilistic model for rapidly quantifying the aggregated flexibility of buildings under uncertainties. An explicit equation is derived as the analytical solution of a commonly used second-order building thermodynamic model to quantify the flexibility of individual buildings, eliminating the need of time-consuming iterative and finite difference computations. A sampling-based uncertainty analysis is performed to obtain the distribution of aggregated building flexibility, considering major uncertainties comprehensively. Validation tests are conducted using 150 commercial buildings in Hong Kong. The results show that the proposed model not only quantifies the aggregated flexibility with high accuracy, but also dramatically reduces the computation time from 3605 s to 6.7 s, about 537 times faster than the existing probabilistic model solved numerically. Moreover, the proposed model is 8 times faster than the archetype-based model and achieves significantly higher accuracy.

Optimizing virtual energy sharing in renewable energy communities of residential users for incentives maximization

Renewable energy communities (RECs) are considered a promising tool for putting the citizens at the center of the energy transition, while also promoting self-sufficiency coming from local resources and decarbonization through high penetration of renewables. A key challenge when operating RECs is represented by the number of decision variables to consider depending on the number and type of community participants and distributed technologies, while also considering the associated uncertainties. Moreover, the monetarization of energy shared in the community for benefitting residential users is crucial. The contribution of this paper is to present an innovative stochastic linear programming model for optimizing the energy sharing in RECs to maximize revenues associated with the incentives for the energy shared as established by the Italian regulation. The REC under study consists of a condominium with a PV plant installed on the rooftop, and air conditioning and battery storage systems installed in each apartment. The problem is to find the optimal control strategies for air conditioning systems and batteries with a 15-minute time-step, which maximize the expected revenue from energy sharing while meeting the users’ comfort requirements and preventing users’ bills from increasing. Numerical results demonstrate the effectiveness of the optimization model to maximize the energy shared and the related revenues through the optimal control of installed assets. The combined optimized strategies of both air conditioning and batteries allow for finding the best performance of the REC in terms of maximization of the energy shared. In this latter case, the expected total revenue for users for the energy sharing increases by 59.7 %, 38.7 % and 12.6 % as compared to the baseline case with no optimal control, the case with control of air conditioning only, and the case with control of batteries only, respectively.

Comprehensive Framework for Distribution Network Multi-Investment Expansion Planning: Emissions, Uncertainty, and Resource Remuneration Integration

Changes are currently unfolding within electric distribution networks as renewable energy integration grows. This paper introduces a novel stochastic approach for expansion planning in distribution networks with high renewable energy penetration. The model addresses uncertainties, daily and seasonal impacts, distributed generation remuneration, carbon emissions, and optimal energy storage deployment. Risk aversion techniques such as value-at-risk and conditional value-at-risk are employed to prepare networks for impactful events. Emphasizing multi-period investment over single-period, the analysis considers confidence levels and risk aversion’s effects on reliability indexes, energy storage placement, generation patterns, network topology, and costs. Using a realistic 180-bus distribution network in Portugal spanning 30 years, the method’s applicability and robustness are demonstrated. Results illustrate the benefits of multi-period investment, with cost increases of 6.09 % and 2.97 % for single- and multi-period investments at a 90 % confidence level, respectively, when both are compared to a situation with no risk aversion. Higher confidence levels amplify the trade-off between extreme scenario cost reduction and total cost increase, with a 99 % confidence level reducing scenario costs by 19.01 % while increasing total costs by 5.64 %.

Frequency Regulation Strategy in Islanded Microgrid With High Renewable Penetration Supported by Virtual Inertia

Frequency Regulation Strategy in Islanded Microgrid With High Renewable Penetration Supported by Virtual Inertia

Load frequency control in power systems with high renewable energy penetration: A strategy employing P[formula omitted](1+PDF) controller, hybrid energy storage, and IPFC-FACTS

The high penetration of Renewable Energy Sources (RESs) in the modern power system poses a challenge to power system stability. This stability is affected by the stochastic, fluctuating output of RESs, which is influenced by weather conditions, and a lack of inertia resulting from reduced rotating mass. To address this issue, a new controller, referred to as Proportional-Fractional Integrator Plus Proportional-Derivative with Filter, PIλ(1+PDF), is designed for Load Frequency Control (LFC) with the support of a Hybrid Energy Storage System (HESS) for power systems with high-RES penetration. The HESS comprises a Superconducting Magnetic Energy Storage System (SMES) and a Vanadium Redox Flow Battery (VRFB) coupled with an Interline Power Flow Controller Flexible AC Transmission Systems (IPFC-FACTs) controller. The HESS, working in conjunction with the proposed LFC, injects virtual inertia and maintains power flow to expedite the frequency stability process. These systems are also integrated with Alternating Current (AC) and High Voltage Direct Current (HVDC) transmission lines to collectively enhance both the system's stability and the capacity of its transmission lines. To optimize the PIλ(1+PDF) controller parameters, Zebra Optimization Algorithm (ZOA) is employed utilizing an Integral Time Absolute Error (ITAE) objective function. The proposed controller is tested on a four-area power system integrated with a wind turbine, photovoltaic (PV) panels, a biodiesel generator, and a hydrogen aqua electrolyzer fuel cell, representing a high penetration of RESs in modern power systems. The results are compared with those obtained using Proportional-Integral-Derivative (PID) and Fractional Order Proportional Integral Derivative (FOPID) controllers. Sensitivity analysis and robustness tests are also performed to verify the stability of the power network by changing system parameters and under randomly chosen loading conditions. The proposed PIλ(1+PDF) controller tuned with ZOA outperforms PID and FOPID controllers by minimizing settling time for frequency changes by 62 %, eliminating overshoot, and reducing undershoots for frequency and tie-line power changes by 73 % and 55 %, respectively. Simulation results demonstrate that the proposed controller outperforms PID and FOPID controllers by effectively damping frequency and tie-line deviations, resulting in reduced frequency overshoots, undershoots, and shorter settling times.

Dispatch strategies for large-scale heat pump based district heating under high renewable share and risk-aversion: A multistage stochastic optimization approach

Heat pumps play an essential role in decarbonizing the heating sector, and their adoption is projected to rise significantly. The high share of large-scale heat pumps in district heating exposes heating utilities to uncertainty in electricity markets. This challenge is further exacerbated by 1) future high share of renewable energy resulting in increased uncertainty of electricity prices, and 2) introduction of voluntary energy bids for balancing energy markets (or regulation market). Despite the importance of this issue, little research has been conducted to address it. Therefore, this paper investigates the optimal dispatch of large-scale heat pump based district heating by adopting multi-stage stochastic optimization approach to minimize the total expected heat generation cost, taking sequential electricity markets prices as stochastic. We also evaluate the impact of high renewable energy penetration on this optimal dispatch strategy. Furthermore, we include the risk preference of district heating operator by using conditional value at risk in the objective function. We conclude that heat pump should be coupled with flexible technologies like electric boilers as more renewable energy and balancing market trading increases flexible units' dispatch. Also, most of the heat produced (50%) in our case study is used flexibly via thermal storage. We find more renewable could lead to negative expected costs and voluntary bids in balancing market further reduces the expected cost by 28–59%. Furthermore, trading risk increases significantly with renewable energy penetration, which can be mitigated to a limited extent by bidding in up and down balancing market. Risk aversion shifts trading from intraday to day-ahead market and promotes heat pump dispatch.

Analysis of grid flexibility in 100% electrified urban energy community: A year-long empirical study

Achieving 'carbon neutrality' in the building sector involves high penetration of renewables, electrification of energy use, and improved flexible interactions with the grid to balance energy supply and demand. This study analyzed one year in an urban energy community powered entirely by electricity, using high levels of renewable sources. By facilitating energy sharing between residential and non-residential buildings, the community redirected surplus energy to meet demand, achieving 57.6% self-consumption, 38.4% self-sufficiency, and 126.3% energy independence rate. This achievement involved an annual electricity consumption of 107 MWh, sevenfold that of previous simulation-based studies, marking the first real-world demonstration. Using machine learning clustering with domain-based interpretation, the study unraveled complex interactions between building operations and the power grid, influenced by external factors (weather, occupant behavior), system design, and controls. Managing low-probability high-impact (LPHI) events of severe demand or production peaks, accounting for only 0.5% of the time and 1.8% of net energy annually, was crucial to grid stability and cost reduction. The study confirmed the limitations of increasing battery energy storage capacity in certain environments, highlighting the importance of demand-side management (DSM) with thermal systems. The DSM effectively handled LPHI events, reducing grid stress with an 18.3% decrease in annual electricity cost .

Incentive-compatible primary frequency response ancillary service market mechanism for incorporating diverse frequency support resources

Frequency vulnerability will be prominent in future low-inertia power systems with high renewable penetration, which calls for primary frequency response (PFR) services from a wide range of entities. The challenge, however, is to design effective and fair market mechanisms to incentivize diverse PFR resources. To this end, this paper proposes a PFR ancillary service market mechanism to ensure the security of frequency nadir and quasi-steady-state (QSS) frequency while providing equitable settlements to multiple PFR providers. First, bidding rules are designed for accurate depictions of dynamic performances from diverse PFR resources. Then, a PFR market-clearing model, incorporating frequency security constraints that explicitly express PFR providers' contributions, is developed to deploy sufficient PFR resources while maximizing social welfare. Finally, two unified marginal PFR prices are derived to reflect the scarcity of frequency support capabilities for maintaining frequency nadir and QSS frequency security, enabling fair settlements to successful bidders based on their contributions. Moreover, the pricing and settlement mechanism is theoretically proven incentive-compatible, ensuring the PFR market stability. Case studies verify the proposed PFR market's effectiveness in ensuring frequency security, providing fair incentives to diverse PFR providers, maintaining market stability, and supporting scalable implementations.

Grid expansion planning with battery storage: Economic potential under high renewable penetration

To ensure a smooth energy transition, rapid expansion of the electric grid is essential to accommodate growing renewable power generation. We assess the role battery storage can play for the power system by either complementing or replacing costly line reinforcements. Adopting a benevolent planner point-of-view, we optimise the expansion of storage with the grid. We focus on a discrete representation of the sub-transmission grid. Given high reinforcement costs and efficient batteries, storage could replace grid investments, especially during low energy prices periods. Additionally, adopting a cost-effective grid representation minimizes storage investments. Ultimately, our work aims to empower grid operators to efficiently utilize battery storage in planning grid expansion.

Generalized Operational Short-Circuit Ratio for Grid Strength Assessment in Power Systems With High Renewable Penetration

Generalized Operational Short-Circuit Ratio for Grid Strength Assessment in Power Systems With High Renewable Penetration