High Mass-resolution Ion Microprobe Research Articles

Protocols for in situ measurement of oxygen isotopes in goethite by ion microprobe

We present protocols for high-spatial resolution measurement of oxygen isotope ratios of goethite (α-FeOOH) with the Sensitive High Mass Resolution Ion Microprobe – Stable Isotopes (SHRIMP-SI) and propose a natural sample as a potential goethite reference material (RM) for ion microprobe analysis. We assess the effects of goethite chemical composition, crystallographic orientation, and texture on the accuracy and repeatability of SHRIMP-SI δ18O (δ18OSIMS) results. Synthetic goethites evaluated as potential δ18OSIMS RM are powdery, porous, and finely crystalline; they do not yield repeatable results. A dense colloform goethite from the Capão topaz mine, Minas Gerais, Brazil, fulfills major prerequisites: it is stoichiometrically relatively pure, yields repeatable oxygen isotope results, and occurs in abundance to produce a RM for long-term use. We use an average laser fluorination δ18OLF-VSMOW value of −17.3 ± 0.3‰ (1SD) obtained for five aliquots of this RM to normalize all δ18OSIMS measurements. Multiple δ18OSIMS analyses of a large fragment of the Capão L4 (CL4) RM analyzed in three different runs yield an overall repeatability of −17.3 ± 0.5‰ (2SD, n = 294) for all three runs combined. Natural variability and crystal orientation effects are the main reasons for the excess spread of the δ18OSIMS results compared to the spot internal precision (ca. 0.2‰). All δ18OSIMS analyses (n = 1027) in various aliquots of CL4, randomly oriented and analyzed in 26 sessions during eight distinct runs, yield an overall repeatability of −17.3 ± 0.7‰ (2SD), confirming that CL4 is a suitable SIMS RM. After ascertaining its suitability as a RM, we used CL4 to standardize analyses of other natural goethite samples with the SHRIMP-SI and compared δ18OSIMS and laser fluorination results to test the relationship between natural properties (e.g., porosity, minor elements substituting for Fe), preparation procedures (e.g., polish and relief), instrument conditions, and the overall precision and accuracy of the SIMS analyses. Samples containing minor elements substituting for Fe (e.g., Al, Mn, Cu, Zn, etc.) or as contaminants (e.g., Si, P) require significant matrix corrections. Because we could not find homogenous natural goethite samples showing a large range in metal concentrations, we extrapolate our calibration curves beyond the composition of our calibration goethite samples. δ18OSIMS results corrected for instrument mass fractionation (using CL4) and compositionally dependent matrix effects (using several calibration goethites of known elemental composition) are less precise but statistically indistinguishable from their laser fluorination results. However, porous samples are unsuitable for SHRIMP-SI δ18O analysis. Dense colloform samples yield repeatable results for individual growth bands, showing that the high spatial resolution, moderate precision, and speed of analysis of the SHRIMP-SI can resolve variations in oxygen isotope composition acquired during sample growth. (UTh)/He geochronology of equivalent aliquots from the same goethite samples reveal that the combination of the two methods permits the extraction of temporal variation in the isotopic compositions of meteoric solutions in the geological past.

Zircon and Titanite U–Pb SHRIMP dating of unexposed basement units of the Buenos Aires region, southeastern Río de La Plata Craton, Argentina

ABSTRACTWe present U–Pb Sensitive High Mass Resolution Ion MicroProbe (SHRIMP) data of unexposed igneous-metamorphic basement rocks from two areas of the southeastern Río de la Plata craton (RPC; Buenos Aires city) located within the Buenos Aires–Piedra Alta (BAPA) terrane – and the Tapalqué area (Buenos Aires province) – located within the Tandilia terrane, and discuss the tectonic evolution of that portion of the craton based on both the new data and previous work. The newly obtained geochronological data of drill cores indicate that: (a) arc magmatism occurred at 2164–2186 Ma corresponding to early ‘Trans-Amazon’ (early Rhyacian) arc magmatism; (b) the age of collision between the BAPA and Tandilia terranes is inferred to have commenced at ca. 2110 Ma; (c) peak metamorphism occurred at ca. 2069 Ma; and (d) the presence of rocks related to the RPC is confirmed under Cenozoic sediments in a large area between Martin Garcia Island and Tandil. We envisage an early Rhyacian divergent double subduction scheme between the BAPA and Tandilia terranes – i.e. N-dipping towards BAPA and S-dipping towards Tandilia – prior to the late Rhyacian collision between these two terranes.

Multiple Sulfur Isotope Analyses Support a Magmatic Model for the Volcanogenic Massive Sulfide Deposits of the Teutonic Bore Volcanic Complex, Yilgarn Craton, Western Australia

We report sensitive high mass resolution ion microprobe, stable isotopes (SHRIMP SI) multiple sulfur isotope analyses (32S, 33S, 34S) to constrain the sources of sulfur in three Archean VMS deposits—Teutonic Bore, Bentley, and Jaguar—from the Teutonic Bore volcanic complex of the Yilgarn Craton, Western Australia, together with sedimentary pyrites from associated black shales and interpillow pyrites. The pyrites from VMS mineralization are dominated by mantle sulfur but include a small amount of slightly negative mass-independent fractionation (MIF) anomalies, whereas sulfur from the pyrites in the sedimentary rocks has pronounced positive MIF, with ∆33S values that lie between 0.19 and 6.20‰ (with one outlier at −1.62‰). The wall rocks to the mineralization include sedimentary rocks that have contributed no detectable positive MIF sulfur to the VMS deposits, which is difficult to reconcile with the leaching model for the formation of these deposits. The sulfur isotope data are best explained by mixing between sulfur derived from a magmatic-hydrothermal fluid and seawater sulfur as represented by the interpillow pyrites. The massive sulfide lens pyrites have a weighted mean ∆33S value of −0.27 ± 0.05‰ (MSWD = 1.6) nearly identical with −0.31 ± 0.08‰ (MSWD = 2.4) for pyrites from the stringer zone, which requires mixing to have occurred below the sea floor. We employed a two-component mixing model to estimate the contribution of seawater sulfur to the total sulfur budget of the two Teutonic Bore volcanic complex VMS deposits. The results are 15 to 18% for both Teutonic Bore and Bentley, much higher than the 3% obtained by Jamieson et al. (2013) for the giant Kidd Creek deposit. Similar calculations, carried out for other Neoarchean VMS deposits give value between 2% and 30%, which are similar to modern hydrothermal VMS deposits. We suggest that multiple sulfur isotope analyses may be used to predict the size of Archean VMS deposits and to provide a vector to ore deposit but further studies are needed to test these suggestions.

Retention of radiation damage in zircon xenocrysts from kimberlites, Northern Yakutia

Abstract We have studied zircon xenocrysts from Mesozoic kimberlites from the Kuoika and Ary–Mastakh fields in Northern Yakutia. Zircon xenocrysts are assumed to originate from crustal rocks. Our SHRIMP (Sensitive High mass Resolution Ion MicroProbe) analyses yielded predominantly concordant U–Th–Pb ages (up to ~ 3570 Ma; Paleoarchean) that clearly predate kimberlite formation. The general U–Th–Pb concordance observed excludes notable disturbance of the zircon xenocrysts U–Th–Pb isotope system during kimberlite ascent and emplacement. In addition, zircon xenocrysts were found to be significantly more radiation-damaged than would correspond to damage accumulation only since the time of kimberlite formation. This observation first indicates that zircon crystals were sampled by the kimberlite magma at comparably shallow depths not exceeding 10–12 km. If, in contrast, zircon crystals originated from deeper levels of the Earth's crust, they would have been exposed to temperatures of 250–300 °C or more. This in turn would have caused long-term thermal annealing of the radiation damage, which was however not observed in our study. Second, our observation contradicts the hypothesis that high temperatures experienced by zircon xenocrysts during kimberlite ascent will cause notable structural reconstitution by short-term thermal annealing. Consequently, zircon crystals cannot have spent more than a few hours at temperatures exceeding ca. 700–800 °C, or more than a few days at temperatures exceeding ca. 500–600 °C. This in turn suggests that (i) temperatures of the ascending kimberlite magmas were rather moderate, and (ii) kimberlite ascent is a comparably short process followed by rapid cooling.

U-Pb zircon age from the radiolarian-bearing Hitoegane Formation in the Hida Gaien Belt, Japan

The dating of radiolarian biostratigraphic zones from the Silurian to Devonian is only partially understood. Dating the zircons in radiolarian-bearing tuffaceous rocks has enabled us to ascribe practical ages to the radiolarian zones. To extend knowledge in this area, radiometric dating of magmatic zircons within the radiolarian-bearing Hitoegane Formation, Japan, was undertaken. The Hitoegane Formation is mainly composed of alternating beds of tuffaceous sandstones, tuffaceous mudstones and felsic tuff. The felsic tuff and tuffaceous mudstone yield well-preserved radiolarian fossils. Zircon grains showing a U–Pb laser ablation–inductively coupled plasma–mass spectrometry age of 426.6 ± 3.7 Ma were collected from four horizons of the Hitoegane Formation, which is the boundary between the Pseudospongoprunum tauversi to Futobari solidus–Zadrappolus tenuis radiolarian assemblage zones. This fact strongly suggests that the boundary of these assemblage zones is around the Ludlowian to Pridolian. The last occurrence of F. solidus is considered to be Pragian based on the reinterpretation of a U–Pb sensitive high mass-resolution ion microprobe (SHRIMP) zircon age of 408.9 ± 7.6 Ma for a felsic tuff of the Kurosegawa belt, Southwest Japan. Thus the F. solidus–Z. tenuis assemblage can be assigned to the Ludlowian or Pridolian to Pragian. The present data also contribute to establishing overall stratigraphy of the Paleozoic rocks of the Fukuji–Hitoegane area. According to the Ordovician to Carboniferous stratigraphy in this area, Ordovician to Silurian volcanism was gradually reduced to change the sedimentary environment into a tropical lagoon in the early Devonian. And the quiet Carboniferous environment was subsequently interrupted, throwing it once more into the volcanic conditions in the Middle Permian.

New SHRIMP U–Pb zircon ages of granitic rocks in the Hida Belt, Japan: Implications for tectonic correlation with Jiamushi massif

AbstractGranitoids in the Hida region of Japan encompass two main rock types: younger type‐1 granites and older type‐2 granites. Sensitive high mass‐resolution ion microprobe (SHRIMP) U–Pb zircon dating of older type‐2 granites collected from the Tateyama area show similar ages of 245 ± 2 Ma and 248 ± 5 Ma for two gneissose granites, while a significantly younger intrusion age of 197 ± 3 Ma was determined for the younger type‐1 granites collected from the Hayatsukigawa River which belongs to the Okumayama pluton. A felsic gneiss sample (07HI‐3) collected from the right bank of the Hayatsukigawa River yielded multiple complex ages at 330 ± 6 Ma, indicating the timing of the Hida regional tectono‐thermal events that formed the Hida gneisses; 243 ± 8 Ma, representing the timing of intrusion of the augen granite; and 220 Ma, indicating the timing of regional dextral ductile shearing that caused a repeated recrystallization of metamorphic rocks in the study area. Considering the geochronological data, the rock types and assemblages, basement, and Sr–Nd isotopic constraints, we propose that the Hida Belt separated from the Jiamushi massif, which is located in the eastern margin of the Central Asian Orogenic Belt.

U–Pb zircon age, sedimentary facies, and sequence stratigraphy of the Devonian–Carboniferous boundary, Daposhang Section, Guizhou, China

The Devonian–Carboniferous (D/C) boundary marks a major extinction event and an important evolutionary turnover in Paleozoic biotas, but understanding D/C boundary events is hampered by a lack of accurate and consistent ages. As a result, although a global stratotype section and point (GSSP) for the D/C boundary was defined in the section La Serre trench E’ (Montagne Noire, France) and accepted and ratified by the IUGS, problems arose concerning both the lithology of the La Serre section and the identification of S. sulcata. Due to these problems, in the very recent years, the ICS decided to reconsider the GSSP. The Daposhang section in Muhua, Guizhou, China, is one of the most important reference sections for the D/C boundary: it is a conformable succession across the D/C boundary that contains conodont faunas characteristic of restricted subtidal facies. A biostratigraphically well constrained tuff near the D/C boundary in the Daposhang section provides an excellent opportunity to date this important event in Paleozoic history. Sensitive high-mass resolution ion microprobe (SHRIMP) U–Pb analyses were conducted on single zircons extracted from the tuff (between beds 0 and 1, which may be temporally equivalent to the Hangenberg black shale) as well as an analysis of sedimentary facies and sequence stratigraphy across the D/C boundary in the Daposhang section. Bed 0 is below the D/C boundary, in the Upper praesulcata conodont zone, and bed 1 is directly above the D/C boundary, in the sulcata conodont zone. Zircon analyses yielded 20 concordant dates that form a cluster with a 206Pb/238U concordia age of 359.6±1.9Ma. An abundance of bioclastic packstone and wackestone and a lack of obvious high-energy sedimentary structures or evidence of reworking in layers spanning the D/C boundary suggest conformable deposition in a quiet, restricted subtidal paleoenvironment. Fifty-nine fifth-order cycles combine to depict a shallowing-upward succession (beds 029-01; highstand systems tract of a third-order sequence representing the terminal Devonian). The highstand systems tract is overlain by a deepening-upward succession (beds 0-29; maximum flooding surface and transgressive systems tract of a third-order sequence representing predominantly the basal Carboniferous) that begins at the D/C boundary. Fischer plot analysis of high-frequency cycles at the D/C boundary confirms this well developed sea-level pattern, which, together with the tuff and black shale depositional events, has potential for global correlation. On the basis of this new single-zircon SHRIMP age and previously published work on the biostratigraphy and sequence stratigraphy of the D/C transition interval, the deposition of tuff took place at approximately 359.6Ma, and the age of the D/C boundary at Daposhang, Guizhou, China, is estimated at 359.58Ma.

SHRIMP U–Pb (zircon), Ar–Ar (muscovite) and Re–Os (molybdenite) isotopic dating of the Taoxikeng tungsten deposit, South China Block

The Taoxikeng tungsten deposit is located in the Jiangxi Province in the southern part of China, and is one of the largest wolframite quartz-vein type tungsten deposits in the country. The deposit is situated in Sinian (Neoproterozoic) to Permian strata at the contact with the buried Taoxikeng Granite. Sensitive High Mass Resolution Ion Microprobe (SHRIMP) zircon U–Pb analysis of the granite has yielded dates of 158.7 ± 3.9 and 157.6 ± 3.5 Ma, which are interpreted as the emplacement age of the granite. Molybdenite separated from ore-bearing quartz-veins yields a Re–Os isochron age of 154.4 ± 3.8 Ma, and muscovite separated from greisen between the granite and country rocks yields 40Ar/ 39Ar plateau ages of 153.4 ± 1.3 and 152.7 ± 1.5 Ma. These dates obtained from three independent geochronological techniques constrain the ore-forming age of the Taoxikeng deposit and link the ore genesis to that of the underlying granite. The Taoxikeng deposit is an example of a Jurassic regional-scale tungsten–tin ore-forming event between 160 and 150 Ma in the Nanling region of the South China Block. The deposit's strikingly low rhenium contents (4.9 to 13.0 × 10 − 3 μg/g) in molybdenite suggests that the ore was derived from a crustal source. This conclusion is consistent with previously published constraints from S, D and O stable isotopes, Sr–Nd systematics, and petrogenetic interpretations of spatially related granites.

Collision-related granitic magmatism in the Granites–Tanami Orogen, Western Australia

The Palaeoproterozoic Granites–Tanami Orogen (GTO) is a significant auriferous province located in the poorly exposed southwestern part of the North Australian Craton (NAC). U-Pb data from Sensitive High Mass Resolution Ion Microprobe (SHRIMP) studies, Sm–Nd isotopic data, geochemistry and petrological studies all suggest that granitic rocks in the Western Australian portion of the GTO were emplaced around ca. 1795 Ma broadly synchronous with gold mineralization. These are variably fractionated, peraluminous, and derived from, or interacted with, ca. 2600 Ma upper crustal material. Deformation, metamorphism and magmatism around 1795 Ma in the GTO were synchronous with the Stafford Orogeny in the Arunta Orogen of central Australia. This deformation was the product of north- to northeast-directed compression within the GTO, and is associated with greenschist facies regional metamorphism. Amphibolite facies metamorphism is restricted to the immediate aureole of certain granitic rocks. This process is clearly a thermal overprint of the regional greenschist facies metamorphism, and indicates that the granitic rocks were emplaced during peak regional metamorphism or soon after. The granitic rocks are inferred to have formed in response to convergence and amalgamation of the GTO and the northern part of the Arunta Orogen along an accretionary margin delineated by the Willowra Lineament, which extends for thousands of kilometres in central and western Australia. Synchronous ca. 1795 Ma orogenic gold mineralization and syn-collisional granitic rocks have been identified across extensive regions throughout the NAC (e.g. the Pine Creek and Halls Creek orogens) suggesting that the Palaeoproterozoic assembly of Australia was marked by a widespread, significant metallogenic event at that time.

Protolith age and provenance of metasedimentary rocks in Variscan allochthon units: U–Pb SHRIMP zircon data from the Orlica–Śnieżnik Dome, West Sudetes

AbstractNew U–Pb sensitive high-mass resolution ion microprobe (SHRIMP) data from detrital zircons within the Orlica–Śnieżnik Dome provide new insights into the stratigraphic and palaeogeographic position of assumed relict Precambrian basement preserved in the Variscan collisional orogen of the West Sudetes, SW Poland. Hitherto, the Młynowiec Formation and the Stronie Formation within the Orlica–Śnieżnik Dome were assumed to represent two metavolcano-sedimentary successions of Proterozoic and early Palaeozoic age, respectively. However, when previous U–Pb data and mapping data from the Orlica–Śnieżnik Dome are combined with the new detrital zircon isotopic ages both from paragneisses within the Młynowiec Formation and from light-coloured quartzites and mica schists within the Stronie Formation, the result strongly suggests that the protoliths of these two formations actually form a continuous succession. This continuous succession is herein designated the Młynowiec–Stronie Group. The rocks of this group were deposited during middle Cambrian–early Ordovician times (c.520–470 Ma), presumably at the northern edge of West Gondwana after the 10–20 Ma period of tectonic quiescence that followed the terminal stage of the Cadomian collisions. Monotonous Młynowiec metagreywackes form the lower part of the succession, and the lithologically diverse schistose Stronie Formation forms its upper part. The change from greywacke (Młynowiec) to volcano-sedimentary (Stronie) facies coincided with the onset of rather short-lived volcanic activity which climaxed around 505–495 Ma and which supplied the volcanogenic components to the Stronie Formation. No ‘Cadomian unconformity’ has been observed in the region. Xenocrystic zircons from the Młynowiec–Stronie Group retain records of Archaean (3.0–2.3 Ga), Palaeoproterozoic (2.1–1.8 Ga) and Neoproterozoic to early Cambrian (660–530 Ma) zircon-forming events. These zircon ages, together with the lack of 1.7–1.2 Ga zircon ages, suggest that the source areas for the metasedimentary rocks may have been the West Africa craton, which therefore differs from the Amazonian affinity of the adjacent Brunovistulia Terrane. Nevertheless, two zircons,c.1.0 and 1.1 Ga old, respectively, indicate that the Młynowiec–Stronie Group sedimentary basin must have still been within the delivery reach of detritus ultimately derived from the Grenvillian-age belt(s). The detrital components of the supracrustal formations of the Orlica–Śnieżnik Dome were mainly derived from Neoproterozoic zircon-bearing crystalline rocks that were accreted to, and included in, the Cadomian basement in several intrusive pulses that culminated at 660–640 Ma, 620 Ma and 570–530 Ma.

Are the Taitao granites formed due to subduction of the Chile ridge?

The Taitao granites are distributed around the Late Miocene Taitao ophiolite (5.66 ± 0.33 Ma to 5.19 ± 0.15 Ma) exposed at the western tip of the Taitao peninsula, southern Chile, ~ 50 km southeast from the present day Chile triple junction. In this paper, we report sensitive high mass-resolution ion microprobe (SHRIMP) U–Pb ages for the Taitao granites to elucidate the temporal relationship between the ophiolite and granites, and discuss the origin of the granitic melts. Five intrusive bodies of the Taitao granites have U–Pb ages ranging from 5.70 ± 0.25 Ma (Tres Montes pluton in southeast) to 3.92 ± 0.07 Ma (Cabo Raper pluton in southwest). The Estero Cono, Seno Hoppner and Bahia Barrientos intrusions that fringe eastern margin of the ophiolite have U–Pb ages ranging from 5.17 ± 0.09 Ma to 4.88 ± 0.3 Ma. Recycled zircon cores are common only in the Tres Montes pluton. Our data indicate that the generation of the granitic melts started in the Tres Montes area when a short segment of the Chile ridge system started to subduct ca. 6 Ma ago. This magmatism involved contamination with sediments/basement rocks. A part of the subducting ridge center was emplaced to form the present Taitao ophiolite at ~ 5.6 Ma. Generation of granitic melts continued as the spreading center of the same ridge segment subducted, due perhaps to partial melting of the ophiolite and/or oceanic crust enhanced by heat from upwelling mantle beneath the ridge. Granitic magmas with various compositions developed during subduction of the ridge. Emplacement of the ophiolite and formation of continental crust took place almost simultaneously.

Experimental measurements of zircon/melt trace-element partition coefficients

Zircon was grown from trace-element doped hydrous peralkaline rhyolite melts with buffered oxygen fugacities in cold-seal experiments at 0.1 and 0.2 GPa and 800 °C and piston-cylinder experiments at 1.5 GPa and 900–1300 °C. Zircon and glass were present in all run products, and small monazite crystals were present in eight of the 12 experiments. Average diameters of zircon crystals ranged from 5 to 20 μm at 800 °C to 30–50 μm at 1300 °C. Zircon crystals have thin rims, and adjacent glass has a narrow (∼1 μm thick) compositional boundary layer. Concentrations obtained through in-situ analysis of cores of run product zircon crystals and melt pools were used to calculate trace-element partition coefficients D zircon/melt for P, Sc, Ti, V, Y, La, Ce, Pr, Nd, Eu, Gd, Ho, Yb, Lu, Hf, Th, and U. In most cases Lu was the most ( D 12–105) and La the least (0.06–0.95) compatible elements. D values from this study fall within the range of previously measured values for Rare Earth Elements (REE). However, D values measured experimentally show less fractionation than those recently measured using natural phenocryst/matrix pairs. For example, D Lu/ D La measured experimentally in this study range between 27 and 206 compared to a value of 706,522 for a natural zircon/dacite pair [Sano, Y., Terada, K., and Fukuoka, T. 2002 High mass resolution ion microprobe analysis of rare earth elements in silicate glass, apatite and zircon: lack of matrix dependency. Chem. Geol. 184, 217–230]. Although D values from this study show good agreement with the lattice strain model, D values from natural phenocryst/matrix pairs combined with measured zircon compositions better reproduce host-rock (magma) compositions of igneous rocks. They also yield more reasonable estimates of magma compositions when combined with compositions of ‘‘out-of-context” zircons. For example, compositions of the Hadean detrital zircons from Jack Hills, Australia yield LREE-enriched magmas when combined with D values from phenocryst/matrix pairs yields, but yield LREE-depleted magmas when experimentally determined D values are used. We infer that experimentally measured D zircon/melt values represent disequilibrium partitioning resulting from rapid zircon growth during short laboratory timescales. Rapid growth causes development of observed diffusive boundary layers in the melt adjacent to zircon crystals. D values from phenocryst/matrix pairs are therefore recommended for petrogenetic modeling.

Development of SHRIMP

The advent of SHRIMP, the Sensitive High Mass-Resolution Ion Microprobe, defines a milestone in Australian geochronology. SHRIMP was the first ion microprobe dedicated to geological isotopic analysis and opened up zircon geochronology to in situ analysis where single domains could be directly targeted. The ease and simplicity of the SHRIMP procedures facilitated rapid analyses of zircon populations. In Archean quartzites of Western Australia Hadean (>4 Ga), zircons were discovered as one of the first scientific reports from SHRIMP. The Hadean zircons gave access to the early history of the Earth and represent a unique resource for determining processes operating during this period. SHRIMP has often been regarded as an instrument solely for U–Pb geochronology, but applications in stable-isotope analysis, cosmochemistry, and trace-element abundance measurements were all parts of the early development. Advances in SHRIMP design have proceeded to enable multiple collection, stable-isotope analysis through negative ion measurement, and construction of different versions of SHRIMP for specific applications. The reverse geometry SHRIMP RG design allows ultra-high mass resolution, whereas the SHRIMP SI will allow a dedicated stable-isotope instrument for light elements.

Protolith age and timing of Precambrian magmatic and metamorphic events in the Priest River complex, northern Rockies

U–Pb dating of detrital zircons, magmatic zircons, and metamorphic zircon overgrowths and titanites from the Priest River complex, USA, reveal the ages of high-grade metasedimentary rocks, intrusive ages of associated igneous rocks, and the timing of Precambrian metamorphic events. Sensitive high-mass resolution ion microprobe (SHRIMP) U–Pb dates of detrital zircons from the Hauser Lake gneiss and Gold Cup Quartzite are predominately Paleoproterozoic with some Archean grains. The Hauser Lake gneiss contains detrital zircons with nearly concordant ages as young as 1511 Ma. Isotope dilution – thermal ionization mass spectrometry (ID–TIMS) and chemical abrasion – thermal ionization mass spectrometry (CA–TIMS) dating of magmatic zircon from amphibolites in the Hauser Lake Gneiss yield 1470–1430 Ma crystallization ages based on discordant data, with Cretaceous lower intercepts. The U–Pb zircon systematics are very complex and reflect multiple periods of magmatic and metamorphic growth. A combination of mechanical abrasion, chemical abrasion (CA–TIMS), and SHRIMP methods were required to identify the major geochronological components. These data, in addition to one Nd model age, strengthen correlations between the Hauser Lake Gneiss and the lower Belt–Purcell Supergroup and the Gold Cup Quartzite with the Neihart Quartzite, which underlies the Belt–Purcell Supergroup. Four SHRIMP-dated metamorphic zircon overgrowths give concordant Grenville dates with a weighted average of 1127 ± 110 Ma. This Grenville-aged metamorphic event is recorded by many isotopic systems in the Belt–Purcell basin and reflects a static thermal event, possibly driven by magmatism at depth.

Progressive metamorphism of the Taitao ophiolite; evidence for axial and off-axis hydrothermal alterations

We estimated metamorphic conditions for the ∼ 6 Ma Taitao ophiolite, associated with the Chile triple junction. The metamorphic grade of the ophiolite, estimated from secondary matrix minerals, changes stratigraphically downwards from the zeolite facies, through the prehnite–actinolite facies, greenschist facies and the greenschist–amphibolite transition, to the amphibolite facies. The metamorphic facies series corresponds to the low-pressure type. The metamorphic zone boundaries are subparallel to the internal lithological boundaries of the ophiolite, indicating that the metamorphism was due to axial hydrothermal alteration at a mid-ocean ridge. Mineral assemblages and the compositions of veins systematically change from quartz-dominated, through epidote-dominated, to prehnite-dominated with increasing depth. Temperatures estimated from the vein assemblages range from ∼ 230 °C in the volcanic unit to ∼ 380 °C at the bottom of the gabbro unit, systematically ∼ 200 °C lower than estimates from the adjoining matrix minerals. The late development of veins and the systematically lower temperatures suggest that the vein-forming alteration was due to off-axis hydrothermal alteration. Comparison between the Taitao ophiolite with its mid-ocean ridge (MOR) affinity, and other ophiolites and MOR crusts, suggests that the Taitao ophiolite has many hydrothermal alteration features similar to those of MOR crusts. This is consistent with the tectonic history that the Taitao ophiolite was formed at the South Chile ridge system near the South American continent (Anma, R., Armstrong, R., Danhara, T., Orihashi, Y. and Iwano, H., 2006. Zircon sensitive high mass-resolution ion microprobe U–Pb and fission-track ages for gabbros and sheeted dykes of the Taitao ophiolite, Southern Chile, and their tectonic implications. The Island Arc, 15(1): 130–142).

Zircon ‘microvein’ in peralkaline granitic gneiss, western Ethiopia: Origin, SHRIMP U–Pb geochronology and trace element investigations

A zircon ‘microvein’ composed of several hundred crystals occurs in peralkaline granitic gneiss of western Ethiopian Precambrians. U–Pb ages and trace element (U, Th, Hf, Y, REE, P, Ca, Al, Fe, and Mn) abundances of the ‘microvein’ and host granitic gneiss zircon were determined using a sensitive high mass resolution ion microprobe (SHRIMP) and electron probe microanalyzer (EPMA). Back-scattered electron (BSE) imaging of the ‘microvein’ zircon and host granite zircon, hereafter referred to as Type-I and Type-II zircon, respectively, reveal prevalent low and high mean atomic number contrast domains within individual crystals. Ubiquitous fluorite microinclusions in bright BSE domains of Type-I and less commonly, Type-II zircon suggest an early formation of fluorite that buffers F activity, causing zircon supersaturation and precipitation from a late-magmatic melt/fluid-enriched in high field strength elements (HFSEs) including Zr. The textural make up of the host peralkaline granitic gneiss and internal structural features of Type-I and Type-II zircon indicate that dark-grey BSE domains were formed by dissolution–reprecipitation owing to fluid infiltration and interaction with the primary zircon crystals. The bright and dark-grey BSE domains in Type-I zircon yield U–Pb ages of 779 ± 69 Ma and 780 ± 35 Ma, and similar domains in Type-II zircon dated at 778 ± 49 Ma and 780 ± 31 Ma, respectively. The primary and recrystallized domains in both zircon types have indistinguishable ages, suggesting initial crystallization shortly followed by fluid-driven alteration. The ages are identical, within analytical uncertainties, to the 776 ± 12 Ma zircon U–Pb emplacement age of a protolith of a leucocratic granitic gneiss determined from a different sample. Hence, zircon crystals forming ‘microvein’ and aggregate structures, the relatively high Th/U ratios (reaching up to 1.5) in the primary domains, high LREE/HREE, and the formation of Type-I and Type-II zircon during emplacement support a late-magmatic–hydrothermal origin. Extensive alteration of the host rock, recrystallization of young and non-metamict zircon corroborate the infiltration of orthomagmatic or hydrothermal fluids containing fluorides as a major constituent, which expelled a considerable amount of trace elements, namely, Hf, U, Th, Y, and the REEs, from the recrystallized domains of Type-I and Type-II zircon. The trace element depleted recrystallized domains characteristically contain microfractures apparently caused by differential volume expansion of the U and Th enriched primary domains or volume change during cation exchange reactions, and anomalously high Th/U ratios (∼ 0.5 to 1.0). Furthermore, the ca. 780–776 Ma emplacement age of the protolith of the peralkaline granitic gneiss and late-stage orthomagmatic or hydrothermal activity shed light on the occurrence of older anorogenic granitoid magmatism and associated structures in western Ethiopian Precambrian terranes.

Geology and timing of dextral strike-slip shear zones in Danmarkshavn, North-East Greenland Caledonides

The North-East Greenland eclogite province is divided into a western, central and eastern block by the sinistral Storstrømmen shear zone in the west and the dextral Germania Land deformation zone in the east. A family of steep, NNW-striking dextral mylonite zones in the Danmarkshavn area are geometrically and kinematically similar to the ductile Germania Land deformation zone, located 25 km to the east. Amphibolite facies deformation at Danmarkshavn is characterized by boudinage of eclogite bodies within quartzofeldspathic host gneisses, pegmatite emplacement into the boudin necks and subsequent deformation of pegmatites parallel to gneissosity, a widespread component of dextral shear within the gneisses, and localization of strain into 10–50 m thick dextral mylonite zones. The gneisses and concordant mylonite zones are cut by a swarm of weakly to undeformed, steeply dipping, E–W-striking pegmatitic dykes. Oscillatory-zoned zircon cores from two boudin neck pegmatites give weighted mean 206Pb/238U sensitive, high mass resolution ion microprobe (SHRIMP) ages of 376 ± 5 Ma and 343 ± 7 Ma. Cathodoluminescence images of these zircons reveal complex additional rims, with ages from ranging from c. 360 to 320 Ma. Oscillatory-zoned, prismatic zircons from two late, cross-cutting pegmatites yield weighted mean 206Pb/238U SHRIMP ages of 343 ± 5 Ma and 332 ± 3 Ma. Zircons from the boudin neck pegmatites record a prolonged growth history, marked by fluid influx, during amphibolite facies metamorphism beginning at c. 375 Ma. The cross-cutting pegmatites show that dextral deformation in the gneisses and ductile mylonite zones had stopped by c. 340 Ma. Ultrahigh-pressure metamorphism in the eastern block at 360 Ma requires that the Greenland Caledonides were in an overall contractional plate tectonic regime. This, combined with 20% steep amphibolite facies lineations in the eclogites, gneisses and mylonites suggests that dextral transpression may have been responsible for a first stage of eclogite exhumation between 370 and 340 Ma.

Himalayan Cu–Mo–Au mineralization in the eastern Indo–Asian collision zone: constraints from Re–Os dating of molybdenite

We present new Re–Os molybdenite age data on three porphyry Cu–Mo–Au deposits (Yulong, Machangqing, and Xifanping). These deposits are associated with the Himalayan adakitic magmatism that occurred in a continental collision environment, controlled by large-scale Cenozoic strike-slip faults in the eastern Indo–Asian collision zone. Three distinct episodes of Cu–Mo–Au mineralization are recognized. At Yulong, Re–Os isotopic data of four molybdenite samples from sulfide-quartz veins in the quartz–sericite alteration zone yield an isochron with an age of 40.1±1.8 Ma (2σ), coincident to a zircon sensitive high-mass resolution ion microprobe (SHRIMP) age of 40.9±0.1 Ma for the host monzogranite. The molybdenite Re–Os dates, together with K–Ar, Rb–Sr, U–Pb, and 40Ar/39Ar dates on the pre- and intra-ore porphyries, suggest that Cu–Mo–Au mineralization formed during the late stage (∼40 Ma) of regional porphyry magmatism, but hydrothermal activity probably lasted to at least ∼36 Ma. At Machangqing, molybdenite Re–Os data from the K–silicate and quartz–sericite alteration zones yield an isochron with an age of 35.8±1.6 Ma (2σ), which is identical to the zircon SHRIMP and bulk-rock Rb–Sr ages (35∼36 Ma) of the host granite, but older than bulk-rock K–Ar dates (31∼32 Ma) for associated Au-bearing quartz syenite with advanced argillic alteration. At Xifanping, five molybdenite samples from the K–silicate alteration zone yield the youngest Re–Os isochron age in the area, at 32.1±1.6 Ma (2σ). The Re–Os molybdenite dates here are younger than K–Ar ages (33.5∼34.6) for hydrothermal biotite and actinolite. There is a positive correlation between the absolute age of the deposits and their Cu and Au reserves in the eastern Indo–Asian collisional zone. Episodic stress relaxation probably caused multiple magmatic intrusions, which most likely resulted in three episodes of Cu–Mo–Au mineralization in the eastern Indo–Asian collision zone.

Provenance and tectonic development of the late Archaean Gawler Craton, Australia; U–Pb zircon, geochemical and Sm–Nd isotopic implications

Integrated Sensitive High Mass Resolution Ion Microprobe (SHRIMP) U–Pb zircon, geochemical and Sm–Nd isotopic data from the late Archaean Gawler Craton, southern Australia, constrain major basin-forming and magmatic processes to the interval 2560–2500 Ma. This terrane represents a convergent margin associated with the second half of a full global Wilson cycle, during which continental fragments formed between 2780 and 2590 Ma amalgamated with younger cratons, perhaps forming the Earth's first supercontinent. Metasedimentary rocks in the central and southern Gawler Craton deposited between 2535 and 2500 Ma, have dominant detrital SHRIMP U–Pb zircon ages, geochemical and ɛ Nd signatures which reflect input from predominantly felsic, juvenile to moderately evolved late Archaean crust. Geochemical patterns in ca. 2560–2500 Ma felsic to intermediate igneous lithologies that in part were produced during on-going basin development, suggest affinities with an arc-like environment, and have a range of ɛ Nd values that indicate variable crustal contamination of primitive arc components. However, approximately coeval komatiites have geochemical and ɛ Nd signatures consistent with a mantle–plume origin. We envisage a tectonothermal regime for development of the late Archaean Gawler Craton that reflects interaction between a convergent margin and mantle–plume, in which sedimentary deposition occurred during active basin development in a back-arc or arc-rift setting. Basin formation and associated magmatism was terminated by regional granulite grade metamorphism and crustal thickening during the ca. 2500–2400 Ma Sleafordian Orogeny, which was proceed by ∼400 Ma of tectonic quiescence. This suggests that the Sleafordian Orogeny was driven by collision between continental components, leading to the formation of a continental interior. While the late Archaean Gawler Craton is younger than prodigious late Archaean metallogenic provinces associated with the first half of a full global Wilson cycle (ca. 2780–2590 Ma), there are important lithological and tectonic similarities to those mineralized systems.

U/Th dating by SHRIMP RG ion-microprobe mass spectrometry using single ion-exchange beads

We present a new analytical method for U-series isotopes using the SHRIMP RG (Sensitive High mass Resolution Ion MicroProbe) mass spectrometer that utilizes the preconcentration of the U-series isotopes from a sample onto a single ion-exchange bead. Ion-microprobe mass spectrometry is capable of producing Th ionization efficiencies in excess of 2%. Analytical precision is typically better than alpha spectroscopy, but not as good as thermal ionization mass spectroscopy (TIMS) and inductively coupled plasma multicollector mass spectrometry (ICP-MS). Like TIMS and ICP-MS the method allows analysis of small samples sizes, but also adds the advantage of rapidity of analysis. A major advantage of ion-microprobe analysis is that U and Th isotopes are analyzed in the same bead, simplifying the process of chemical separation. Analytical time on the instrument is ∼60 min per sample, and a single instrument-loading can accommodate 15–20 samples to be analyzed in a 24-h day. An additional advantage is that the method allows multiple reanalyses of the same bead and that samples can be archived for reanalysis at a later time. Because the ion beam excavates a pit only a few μm deep, the mount can later be repolished and reanalyzed numerous times. The method described of preconcentrating a low concentration sample onto a small conductive substrate to allow ion-microprobe mass spectrometry is potentially applicable to many other systems.