High Iodide Concentrations Research Articles

Evaluation and strategy for improving the quality of desalinated water.

Seawater desalination is practiced in many coastal countries, which is accepted as clean water by the general populations. The untreated seawater reported high concentrations of bromide (50,000 - 80,000µg/L) and iodide (21 - 60µg/L) ions, which are reduced to non-detectable levels during thermal desalination while the concentrations of bromide and iodide ions were reduced to 250-600µg/L and < 4-16µg/L, respectively during reverse osmosis processes. During the treatment and/or disinfection, many brominated and iodinated disinfection byproducts (Br-DBPs and I-DBPs) are formed in desalinated water, some of which are genotoxic and cytotoxic to the mammalian cells and possible/probable human carcinogens. In this paper, DBPs' formation in desalinated and blended water from source to tap, toxicity to the mammalian cells, their risks to humans and the strategies to control DBPs were investigated. The lifetime excess cancer risks from groundwater, and desalinated and blended water sourced DBPs were 4.15 × 10-6 (4.72 × 10-7 - 1.30 × 10-5), 1.75 × 10-5 (2.58 × 10-6 - 5.25 × 10-5) and 2.59 × 10-5 (4.02 × 10-6 - 8.35 × 10-5) respectively, indicating higher risks from desalinated and blended water (2.56 and 4.51 times respectively) than groundwater systems. Few emerging DBPs in desalinated/blended water showed higher cyto- and genotoxicity in the mammalian cells. The findings were compared with safe drinking water standards and strategies to produce cleaner desalinated water were demonstrated.

Microbial Contributions to Iodide Enrichment in Deep Groundwater in the North China Plain.

Microorganisms play crucial roles in the global iodine cycling through iodine oxidation, reduction, volatilization, and deiodination. In contrast to iodate formation in radionuclide-contaminated groundwater by the iodine-oxidizing bacteria, microbial contribution to the formation of high level of iodide in geogenic high iodine groundwater is poorly understood. In this study, our results of comparative metagenomic analyses of deep groundwater with typical high iodide concentrations in the North China Plain revealed the existence of putative dissimilatory iodate-reducing idrABP1P2 gene clusters in groundwater. Heterologous expression and characterization of an identified idrABP1P2 gene cluster confirmed its functional role in iodate reduction. Thus, microbial dissimilatory iodate reduction could contribute to iodide formation in geogenic high iodine groundwater. In addition, the identified iron-reducing, sulfur-reducing, sulfur-oxidizing, and dehalogenating bacteria in the groundwater could contribute to the release and production of iodide through the reductive dissolution of iron minerals, abiotic iodate reduction of derived ferrous iron and sulfide, and dehalogenation of organic iodine, respectively. These microbially mediated iodate reduction and organic iodine dehalogenation processes may also result in the transformation among iodine species and iodide enrichment in other geogenic iodine-rich groundwater systems worldwide.

Interface engineering enables stable and reversible zinc anode for high-performance Zn–I2 battery

Aqueous Zn-based batteries have been regarded as a promising energy storage system due to their high energy/power density, safety, and cost-effectiveness. However, their performance have been severely hindered by the dendrite growth of zinc and water-induced side reactions. Herein, a facial strategy of electrolyte modification with a high concentration of zinc sulfate and lithium iodide (LiI) as additives is proposed to guide the preferential growth along with the Zn (002) plane for the smooth Zn deposition. Compared to the pure zinc sulfate electrolyte, the Zn anode in the modified electrolyte exhibited the ultralong cycling stability for 3000 h at a capacity of 1 mAh cm−2 and 400 h at a higher capacity of 5 mAh cm−2, with low reversible deposition potentials of around 30 and 40 mV, respectively, demonstrating the stable plating/stripping behaviors. More importantly, the cycling stability of the Zn–I2 battery with the modified electrolyte can still deliver a large specific capacity after 5000 cycles. The strategy presented that the LiI as additive could not only provide an iodine-rich environment to induce the preferential growth of Zn (002) plane, but also eliminate the side corrosion reactions with the help of additional Li-ions, thus leading to the high-performing Zn–I2 battery.

Granulation of Bismuth Oxide by Alginate for Efficient Removal of Iodide in Water.

The granulation of bismuth oxide (BO) by alginate (Alg) and the iodide adsorption efficacy of Alg–BO for different initial iodide concentrations and contact time values were examined. The optimal conditions for Alg–BO granulation were identified by controlling the weight ratio between Alg and BO. According to the batch iodide adsorption experiment, the Alg:BO weight ratio of 1:20 was appropriate, as it yielded a uniform spherical shape. According to iodide adsorption isotherm experiments and isotherm model fitting, the maximum sorption capacity (qm) was calculated to be 111.8 mg/g based on the Langmuir isotherm, and this value did not plateau even at an initial iodide concentration of 1000 mg/L. Furthermore, iodide adsorption by Alg–BO occurred as monolayer adsorption by the chemical interaction and precipitation between bismuth and iodide, followed by physical multilayer adsorption at a very high concentration of iodide in solution. The iodide adsorption over time was fitted using the intraparticle diffusion model. The results indicated that iodide adsorption was proceeded by boundary layer diffusion during 480 min and reached the plateau from 1440 min to 5760 min by intraparticle diffusion. According to the images obtained using cross-section scanning electron microscopy assisted by energy-dispersive spectroscopy, the adsorbed iodide interacted with the BO in Alg–BO through Bi–O–I complexation. This research shows that Alg–BO is a promising iodide adsorbent owing to its high adsorption capacity, stability, convenience, and ability to prevent secondary pollution.

Spontaneous Symmetry Breaking: The Case of Crazy Clock and Beyond

In this work, we describe the crazy-clock phenomenon involving the state I (low iodide and iodine concentration) to state II (high iodide and iodine concentration with new iodine phase) transition after a Briggs–Rauscher (BR) oscillatory process. While the BR crazy-clock phenomenon is known, this is the first time that crazy-clock behavior is linked and explained with the symmetry-breaking phenomenon, highlighting the entire process in a novel way. The presented phenomenon has been thoroughly investigated by running more than 60 experiments, and evaluated by using statistical cluster K-means analysis. The mixing rate, as well as the magnetic bar shape and dimensions, have a strong influence on the transition appearance. Although the transition for both mixing and no-mixing conditions are taking place completely randomly, by using statistical cluster analysis we obtain different numbers of clusters (showing the time-domains where the transition is more likely to occur). In the case of stirring, clusters are more compact and separated, revealed new hidden details regarding the chemical dynamics of nonlinear processes. The significance of the presented results is beyond oscillatory reaction kinetics since the described example belongs to the small class of chemical systems that shows intrinsic randomness in their response and it might be considered as a real example of a classical liquid random number generator.

Photocatalyst assemblies with two halide ions

A series of ruthenium polypyridyl photocatalysts bearing amide functional groups were designed that successfully promoted halide assembly in CH2Cl2 and CH3CN solution. In CH2Cl2, halide assembly was accompanied by a visible color change, and the spectral changes presented clear evidence for two halide binding events, yielding a 1:2 ruthenium:halide assembly. In the more polar solvent CH3CN, 1:2 assembly structures were also observed with chloride, bromide, and iodide, and large equilibrium constants were measured for association of the first and second halide (K11 = 0.04 – 2 × 106 M−1, K12 = 0.01 – 3 × 105 M−1). Varying the functional groups on the ancillary ligands tuned the excited-state reduction potentials (Ru2+⁎/+), resulting in a photocatalyst capable of performing iodide oxidation. Quenching of the photocatalyst excited state resulted in static and dynamic quenching, and a Stern-Volmer analysis yielded two linear regions at low and high iodide concentrations. The dynamic quenching rate constants (kq = 6.8 and 4.0 × 1010 M−1 s−1) and static quenching constants (KS = 2.4 and 0.13 × 104 M−1) at low and high iodide concentrations, respectively, were consistent with dynamic quenching of Ru2+ and [Ru2+,I−]+, and static quenching of [Ru2+,I−]+and [Ru2+,2I−]. Transient absorption spectroscopy revealed that the quenching reaction yielded a reduced ruthenium (Ru+) as the primary photoproduct and diiodide (I2•−) as a secondary photoproduct. The second-order rate constant for I2•− formation was measured to be 2.5 × 1010 M−1 s−1, a value consistent with the diffusion limited reaction. The transient absorption data indicates that oxidized halide photoproducts only result from the diffusional quenching reactions, and not from static quenching with an associated iodide ion. Fast back-electron transfer rates and low cage-escape yields in the ruthenium:iodide assemblies are invoked to explain why the static quenching pathway does not lead to measurable photoproduct yields.

Optical Fingerprints of Polynuclear Complexes in Lead Halide Perovskite Precursor Solutions.

Solvent-solute interactions in precursor solutions of lead halide perovskites (LHPs) critically impact the quality of solution-processed materials, as they lead to the formation of a variety of poly-iodoplumbates that act as building blocks for LHPs. The formation of [PbI2+n]n- complexes is often expected in diluted solutions, while coordination occurring at high concentrations is not yet well understood. In a combined ab initio and experimental work, we demonstrate that the optical spectra of the quasi-one-dimensional iodoplumbate complexes PbI2(DMSO)4, Pb2I4(DMSO)6, and Pb3I6(DMSO)8 formed in dimethyl sulfoxide solutions are compatible with the spectral fingerprints measured at high lead iodide concentrations. This finding suggests that the interpretation of optical spectra of LHP precursor solutions should account for the formation of polynuclear lead halide complexes.

Surface Inorganic Iodine Speciation in the Indian and Southern Oceans From 12°N to 70°S

Marine iodine speciation has emerged as a potential tracer of primary productivity, sedimentary inputs, and ocean oxygenation. The reaction of iodide with ozone at the sea surface has also been identified as the largest deposition sink for tropospheric ozone and the dominant source of iodine to the atmosphere. Accurate incorporation of these processes into atmospheric models requires improved understanding of iodide concentrations at the air-sea interface. Observations of sea surface iodide are relatively sparse and are particularly lacking in the Indian Ocean basin. Here we examine 127 new sea surface (≤10 m depth) iodide and iodate observations made during three cruises in the Indian Ocean and the Indian sector of the Southern Ocean. The observations span latitudes from ∼12°N to ∼70°S, and include three distinct hydrographic regimes: the South Indian subtropical gyre, the Southern Ocean and the northern Indian Ocean including the southern Bay of Bengal. Concentrations and spatial distribution of sea surface iodide follow the same general trends as in other ocean basins, with iodide concentrations tending to decrease with increasing latitude (and decreasing sea surface temperature). However, the gradient of this relationship was steeper in subtropical waters of the Indian Ocean than in the Atlantic or Pacific, suggesting that it might not be accurately represented by widely used parameterizations based on sea surface temperature. This difference in gradients between basins may arise from differences in phytoplankton community composition and/or iodide production rates. Iodide concentrations in the tropical northern Indian Ocean were higher and more variable than elsewhere. Two extremely high iodide concentrations (1241 and 949 nM) were encountered in the Bay of Bengal and are thought to be associated with sedimentary inputs under low oxygen conditions. Excluding these outliers, sea surface iodide concentrations ranged from 20 to 250 nM, with a median of 61 nM. Controls on sea surface iodide concentrations in the Indian Ocean were investigated using a state-of-the-art iodine cycling model. Multiple interacting factors were found to drive the iodide distribution. Dilution via vertical mixing and mixed layer depth shoaling are key controls, and both also modulate the impact of biogeochemical iodide formation and loss processes.

Formation of emerging iodinated disinfection by-products during ballast water treatment based on ozonation processes

Disinfection by-products (DBPs) generated by ballast water treatment pose a potential threat to marine environment which aroused widespread concern. In recent years, emerging iodinated DBPs have attracted widespread attention because of their stronger cytotoxicity and genotoxicity than brominated/chlorinated DBPs. In this study, the effects of different natural organic matter species, total residual oxidant (TRO) concentrations, storage time, temperature, pH, bromide and iodide concentrations on the generation of iodinated trihalomethanes (I-THMs) during ozonation process of ballast water were investigated. The results showed that bromochloroiodomethane and diiodochloromethane (DICM) were not detected under all conditions during ozonation of humaic acid (HA). Different kinds of precursors had a significantly effect on the formation of I-THMs. For algal cells as precursor, DICM were detected (1.22 μg/L), while DICM were not detected from oxidation of 1,3-etonedicarboxylic acid, fulvic acid (FA), phenol, resorcinol, hydroquinone and HA as precursors. The yields of I-THMs from oxidation of algal cells, FA and phenol were higher than other precursors. Linear relationships were observed between the formation of I-THMs and TRO concentrations. The yields of I-THMs reached a peak at 48 h (180 μg/L) after ozonation treatment of ballast water, and then decreased with storage time extension. An increase in temperature enhanced the formation of dibromoiodomethane and bromodiiodomethane, while wakened the formation of iodoform and dichloroiodomethane. The formation of I-THMs was complicatedly affected by different pH values in the range from 4 to 9. The more bromide concentrations, the more brominated I-THMs were formed. The concentrations of I-THMs increased with increasing iodide concentrations, and low concentrations of iodide had greater effect on the production of I-THMs than high concentrations of iodide.

Effect of Halogen Ions on the Photocycle of Fluorescent Carbon Nanodots

Carbon dots (C-dots) are well-known for their strong sensitivity to the environment, which reflects on intensity and shape changes of their fluorescence, induced by various interacting ions and molecules in solution. Although these interactions have been extensively studied in the last few years, especially in view of their possible sensing applications, the existing works have mostly focused on the quenching of C-dot fluorescence induced by metal cations. In fact, these latter easily bind to C-dots surfaces, which are negatively charged in most cases, promoting an electron transfer from the surface to them. Much less is known from the literature on the effect induced on C-dots by prototypical negative species in solutions, motivating more systematic studies on this different class of interactions. Here, we analyzed the effect of halogen ions on the fluorescence of C-dots, by combining steady-state optical absorption and photoluminescence, time-resolved fluorescence and femtosecond pump/probe spectroscopy. We demonstrate a quenching effect of C-dots fluorescence in the presence of halogen ions, which becomes more and more pronounced with increasing atomic number of the halogens, being negligible for chloride, appreciable for bromide and stronger for iodide. We find that quenching is mostly static, due to the binding of halogen ions on suitable surface sites at C-dots surfaces, while collisional quenching becomes obvious only at very high iodide concentrations. Finally, nanosecond and femtosecond time-resolved spectroscopies provide information on the quenching mechanism and time scales. Based on these data, we propose that the fluorescent state is deactivated by intersystem crossing to a dark triplet state, induced by close-range interactions with the heaviest halogen ions.

Transhalogenation Catalysed by Haloalkane Dehalogenases Engineered to Stop Natural Pathway at Intermediate

AbstractHaloalkane dehalogenases (HLDs) are α/β‐hydrolases that convert halogenated compounds to their corresponding alcohols. The overall kinetic mechanism proceeds via four steps: (i) binding of halogenated substrate, (ii) bimolecular nucleophilic substitution (SN2) leading to the cleavage of a carbon‐halogen bond and the formation of an alkyl‐enzyme intermediate, (iii) nucleophilic addition of a water molecule resulting in the hydrolysis of the intermediate to the corresponding alcohol and (iv) release of the reaction products – an alcohol, a halide ion and a proton. Although, the overall reaction has been reported as irreversible, several kinetic evidences from previous studies suggest the reversibility of the first SN2 chemical step. To study this phenomenon, we have engineered HLDs to stop the catalytic cycle at the stage of the alkyl‐enzyme intermediate. The ability of the intermediate to exchange halides was confirmed by a stopped‐flow fluorescence binding analysis. Finally, the transhalogenation reaction was confirmed with several HLDs and 2,3‐dichloropropene in the presence of a high concentration of iodide. The formation of the transhalogenation product 3‐iodo‐2‐chloropropene catalysed by five mutant HLDs was identified by gas chromatography coupled with mass spectrometry. Hereby we demonstrated the reversibility of the cleavage of the carbon‐halogen bond by HLDs resulting in a transhalogenation. After optimization, the transhalogenation reaction can possibly find its use in biocatalytic applications. Enabling this reaction by strategically engineering the enzyme to stop at an intermediate in the catalytic cycle that is synthetically more useful than the product of the natural pathway is a novel concept.magnified image

An Estimation of Volatile Iodine in a Pool at Low pH and High Iodide Concentrations Under Irradiation

A new empirical model is proposed for estimating the amount of volatile iodine in an aqueous phase. The volatile iodine concentration is estimated for highly irradiated CsI solutions in which the pH of the solution changes. The reaction of CsI solution with water radiolysis products is not balanced because radiolysis products are continuously produced under irradiation. Thus the kinetic of the chemical equation is important to determine iodine behavior in a CsI solution. An empirical model for the kinetic equation including the oxidation and reduction reaction is proposed. The proposed model was validated with a wide range of experimental data. A comparison of the experiments and predictions by the model indicated that the predicted volatile iodine from CsI solution with a concentration of 10−3 to 10−4 M was in good agreement. For 10−5 M CsI solution, the predicted iodine concentration was much smaller than experimental data due to the fact that I− was rapidly converted to IO3−.

Next Generation Risk Assessment for consumer safety of cosmetics: A case study approach

To date, there are many people residing in areas with high levels of iodide in water. Our previous epidemiological study showed that exposure to high iodine in drinking water significantly reduced the intelligence of children although the mechanisms remain unclear. To explore whether high concentrations of iodide may cause cytotoxic effect and the role of autophagy in the high iodide-induced apoptosis, human neuroblastoma cells (SH-SY5Y cells) were exposed to high concentrations of iodide. Morphological phenotypes, cell viability, Hoechst 33258 staining, the expression levels of apoptosis and autophagy-related proteins were detected. A possible effect of an inhibitor (3-methyladenine, 3-MA) or an inducer (rapamycin) of autophagy on high iodide-induced apoptosis also was examined. Results indicated that high iodide changed cellular morphology, decreased cell viability and increased the protein’s expression level of apoptosis and autophagy. In addition, high iodide-induced apoptosis was enhanced by inhibition of autophagy and inhibited by activation of autophagy in SH-SY5Y cells. Collectively, high concentrations of iodide are toxic to SH-SY5Y cells, as well as induce apoptosis and autophagy. Furthermore, autophagy plays a regulatory role in high concentrations of iodide-induced apoptosis in SH-SY5Y cells.

K04 – Drug discovery: if you want to see different results do things differently

To date, there are many people residing in areas with high levels of iodide in water. Our previous epidemiological study showed that exposure to high iodine in drinking water significantly reduced the intelligence of children although the mechanisms remain unclear. To explore whether high concentrations of iodide may cause cytotoxic effect and the role of autophagy in the high iodide-induced apoptosis, human neuroblastoma cells (SH-SY5Y cells) were exposed to high concentrations of iodide. Morphological phenotypes, cell viability, Hoechst 33258 staining, the expression levels of apoptosis and autophagy-related proteins were detected. A possible effect of an inhibitor (3-methyladenine, 3-MA) or an inducer (rapamycin) of autophagy on high iodide-induced apoptosis also was examined. Results indicated that high iodide changed cellular morphology, decreased cell viability and increased the protein’s expression level of apoptosis and autophagy. In addition, high iodide-induced apoptosis was enhanced by inhibition of autophagy and inhibited by activation of autophagy in SH-SY5Y cells. Collectively, high concentrations of iodide are toxic to SH-SY5Y cells, as well as induce apoptosis and autophagy. Furthermore, autophagy plays a regulatory role in high concentrations of iodide-induced apoptosis in SH-SY5Y cells.

Characterization of Iodine-Related Molecular Processes in the Marine Microalga Tisochrysis lutea (Haptophyta)

Iodine metabolism is essential for the antioxidant defense of marine algae and in the biogeochemical cycle of iodine. Moreover, some microalgae can synthetize thyroid hormone-like compounds that are essential to sustain food webs. However, knowledge regarding iodine-related molecular processes in microalgae is still scarce. In this study, a de novo transcriptome of Tisochrysis lutea cultured under high iodide concentrations (5 mM) was assembled using both long and short reads. A database termed IsochrysisDB was established to host all genomic information. Gene expression analyses during microalgal growth showed that most of the antioxidant- (aryl, ccp, perox, sod1, sod2, sod3, apx3, ahp1) and iodide-specific deiodinase (dio) genes increased their mRNA abundance progressively until the stationary phase to cope with oxidative stress. Moreover, the increase of dio mRNA abundance in aging cultures indicated that this enzyme was also involved in senescence. Cell treatments with iodide modified the expression of perox whereas treatments with iodate changed the transcript levels of gpx1 and ccp. To test the dependence of perox on iodide, microalgae cells were treated with hydrogen peroxide (H2O2) either in presence or absence of iodide observing that several genes related to reactive oxygen species deactivation (perox, gpx1, apx2, apx3, ahp1, ahp2, sod1, sod3 and aryl) were transcriptionally activated although with some temporal differences. However, only the expression of perox was dependent on iodide levels indicating this enzyme, acquired by horizontal gene transfer, could act as a haloperoxidase. All these data indicate that T. lutea activates coordinately the expression of antioxidant genes to cope with oxidative stress. The identification of a phase-regulated deiodinase and a novel haloperoxidase provide new clues about the origin and evolution of thyroid signaling and the antioxidant role of iodine in the marine environment.

Transition from Low to High Iodide and Iodine Concentration States in the Briggs-Rauscher Reaction: Evidence on Crazy Clock Behavior.

The Briggs-Rauscher reaction containing malonic acid may undergo a sudden transition from low (state I) to high iodide and iodine (state II) concentration states after a well-defined and strongly reproducible oscillatory period. This study clearly shows that even though the time-dependent behavior of the oscillatory state is reproducible, the time lag necessary for the appearance of the state I to state II transition after the system leaves the oscillatory state becomes irreproducible for an individual kinetic run. This crazy clock behavior of the state I to state II transition is identified by repeated experiments in which stirring rate is taken as a control parameter and all other parameters such as initial conditions, temperature, vessel surface, and the age of solution were kept constant. Surprisingly, a better stirring condition does not make the transition reproducible; it simply does not allow the transition to happen at all. The proposed mechanism, additional explanations, and proposals for this irreproducibility of state I to state II transition have been presented. Considering the fact that the number of crazy clock reactions is only a few, this study may contribute to a better understanding of fundaments of this phenomenon.

Autophagy regulates high concentrations of iodide-induced apoptosis in SH-SY5Y cells

To date, there are many people residing in areas with high levels of iodide in water. Our previous epidemiological study showed that exposure to high iodine in drinking water significantly reduced the intelligence of children although the mechanisms remain unclear. To explore whether high concentrations of iodide may cause cytotoxic effect and the role of autophagy in the high iodide-induced apoptosis, human neuroblastoma cells (SH-SY5Y cells) were exposed to high concentrations of iodide. Morphological phenotypes, cell viability, Hoechst 33258 staining, the expression levels of apoptosis and autophagy-related proteins were detected. A possible effect of an inhibitor (3-methyladenine, 3-MA) or an inducer (rapamycin) of autophagy on high iodide-induced apoptosis also was examined. Results indicated that high iodide changed cellular morphology, decreased cell viability and increased the protein’s expression level of apoptosis and autophagy. In addition, high iodide-induced apoptosis was enhanced by inhibition of autophagy and inhibited by activation of autophagy in SH-SY5Y cells. Collectively, high concentrations of iodide are toxic to SH-SY5Y cells, as well as induce apoptosis and autophagy. Furthermore, autophagy plays a regulatory role in high concentrations of iodide-induced apoptosis in SH-SY5Y cells.

The influence of precursors and treatment process on the formation of Iodo-THMs in Canadian drinking water

The National Survey of Disinfection By-Products and Selected Emerging Contaminants investigated the formation of various disinfection by-products and contaminants in 65 water treatment systems (WTSs) across Canada. Results for six iodo-trihalomethanes (iodo-THMs) are reported in this paper. The participating water treatment systems included large, medium and small systems using water sources and treatment processes which were representative of Canadian drinking water. Five water samples (source water, treated water and three water samples along the distribution system) were collected from each treatment system, both under winter and summer conditions. Samples were stabilized, shipped cold and analysed for six iodo-THMs (dichloroiodomethane–DCIM; dibromoiodomethane–DBIM; bromochloroiodomethane–BCIM; chlorodiiodomethane–CDIM; bromodiiodomethane–BDIM and triiodomethane or iodoform–TIM), using a SPME-GC-ECD method developed in our laboratory (MDLs from 0.02 μg/L for iodoform to 0.06 μg/L for bromodiiodomethane). Concentrations of relevant precursors like dissolved organic carbon (DOC), bromide, iodide and total iodine, as well as other water quality parameters, were also determined. Detailed information about the treatment process used at each location was recorded using a questionnaire. The survey showed that one or more iodo-THMs were detected at 31 out of 64 water treatment systems (WTSs) under winter conditions and in 46 out of 64 WTSs under summer conditions (analytical results from one site were excluded due to sampling challenges). Total iodo-THM concentrations measured during this survey ranged from 0.02 μg/L to 21.66 μg/L. The highest total iodo-THM concentration was measured in WTS 63 where all six iodo-THMs were detected and iodoform was present in the highest concentration. The highest iodo-THM formation was found to occur in treatment systems where water sources had naturally occurring ammonium as well as high bromide, high iodide and/or total iodine concentrations. In two such water systems the total concentration of iodo-THMs exceeded the concentration of regulated THMs.

Iodide-Switched Deposition for the Synthesis of Segmented Pd-Au-Pd Nanorods: Crystal Facet Matters.

Segmented metallic nanorods with well-defined shapes and controllable components play an important role on the systematic investigation of their shape-dependent catalytic, electric, and plasmonic properties of metal nanostructures. Unfortunately, the shape and composition of segmented nanorods are difficult to be precisely controlled via colloidal methods. Here, we reported the growth of Pd-Au-Pd bimetallic heterostructures by using Au 5-fold twinned bipyramids (BPs) as seeds, with KI as a structure-directing reagent. Through a series of control experiments we revealed that two parameters were identified as critical factors for the growth of segmented Pd-Au-Pd nanorods. First, 5-fold twinned Au BPs with low-index end facets and high-index side facets function as a unique template for directed growth. Second, iodide can switch the deposition of Pd on the Au BPs. A high concentration of iodide is believed to block the high-index facets of the Au BPs and lower the reaction kinetics to promote the selective growth of two Pd segments on the Au BPs. As a result, uniformed segmented Pd-Au-Pd nanorods were obtained. The segmented nanorods exhibit intense extinction in the near-IR range and could be a potential candidate for plasmon-based biological applications such as thermal therapy.

Analysis of transition from low to high iodide and iodine state in the Briggs–Rauscher oscillatory reaction containing malonic acid using Kolmogorov–Johnson–Mehl–Avrami (KJMA) theory

The oscillatory behavior is not the only interesting nonlinear phenomena that appeared in the Briggs–Rauscher (BR) reaction. The BR reaction containing malonic acid may undergo a sudden transition from low (the state I) to high iodide and iodine (the state II) concentration states. This paper focuses on the mixture with an immutable [CH2(COOH)2]0/[IO3 −]0 = 1.5 value, where state I to state II transition occurs after a time delay and BR reaction ended with a solution abundant of solid iodine. The state I to the state II transition curves obtained at different temperatures were analyzed using the Kolmogorov–Johnson–Mehl–Avrami (KJMA) theory. The KJMA theory was applied for monitoring the crystallization process of isolated solid iodine product at various levels of operating temperatures. At T < 33.5 °C, we have one type of the process and iodine was formed by autocatalysis pathway. On the other hand, at T ≥ 33.5 °C, two processes occur. With the rise in operating temperature, the emergence of inhomogeneous distribution of nuclei was identified and it was established the primary and secondary crystallization processes of iodine. At elevated temperatures, it was also found that the strong influence of impingement mechanism exists. Results obtained are the first step toward elucidation of the complex reaction mechanism of the state I → state II transition.