High-input Systems Research Articles

A review of extended lactation in dairy cows managed in high-input and pasture-based farming systems

Traditionally the lactation cycle of a dairy cow is based around a 12-month calving interval, allowing for 10 months of lactation, followed by a 2-month dry period. This means that the cow has to conceive within 2–3 months after calving, when she is also at peak lactation and metabolically is in a negative energy balance. Such challenging physiological conditions make it challenging for the cow to conceive at this time and many modern high-producing cows fail to get pregnant within the constraints of a 12-month calving interval. In addition, many cows still produce at a high level at drying-off time, increasing the risk of intramammary infections. Therefore, delaying conception past peak production and, as a result, extending the lactation beyond 10 months may increasingly be necessary. Additionally, extended lactation (EL) may offer other advantages such as fewer calves being born and thus fewer ‘surplus’ calves needing to be culled at a young age, fewer health and welfare issues and improved environmental outcomes (i.e. less greenhouse-gas emission; less antibiotic usage) during the lifetime of the animal. Extending lactation is a straight forward management practice in high-input dairy systems where a consistent supply of feed supplements is readily available, but may be more challenging to implement in low(er)-input pasture-based systems. The latter are much more seasonal, with a 12-month calving interval allowing pasture growth and quality to match the cow’s nutritional demands; cows calve in spring when high-quality pasture is abundant and are dried-off during winter when pasture growth is more limited. In this review, we explored the impact of EL in both high-input systems and pasture-based systems. It covers the effects of EL on milk production, composition and processing, as well as on reproductive performance, health and welfare, and environmental and economic outcomes.

Weed community differences in row crops with varying input levels in Ghana

Abstract Peanut (Arachis hypogaea L.) and maize (Zea mays L.) are essential crops for Ghana’s economy and food security, but weed infestation poses a significant threat to their cultivation. Crop rotations influence weed communities, but little is known about these processes in peanut-cropping systems in West Africa. This study investigated the impact of different crop rotations and input levels on weed communities in Ghana over 3 yr. Results showed that low inputs (absence of herbicide and fertilization) favored species richness, while higher input levels (weed control with herbicides and fertilizer use) reduced it. Diversity and evenness were also affected by inputs, with varying patterns across locations and seasons. Weed population growth rates (λ) varied significantly by location and treatment; all management programs resulted in increasing weed populations. Principal component analysis revealed distinct associations between weed species and crop management. The majority of weed species exhibited a generalist behavior and did not associate with a particular management. However, billygoat weed (Ageratum conyzoides L.) and Benghal dayflower (Commelina benghalensis L.) were positively associated with high-input systems, while purple nutsedge (Cyperus rotundus L.) exhibited strong associations with low and medium inputs. The weed–crop rotation dynamics described here demonstrate how management drives the selection of weed species that are more pervasive and interfere with important food crops in Ghanaian agriculture.

Transforming the feeding regime towards low-input increases the environmental impact of organic milk production on a case study farm in central germany

Abstract Purpose Despite the direct effect of the feeding regime on the environmental impacts of dairy farming systems, its level of intensity, particularly in organic systems, has rarely been investigated. This study compares the environmental impact of a high-input feeding regime with a grassland-based, low-input feeding regime scenario within an organic milk production system conducted on Gladbacherhof, the research farm of Justus Liebig University Giessen, in Central Germany. Methods An integrated Life Cycle Assessment (LCA) analysis was performed from a cradle-to-farm gate perspective to quantify five environmental impacts, namely Global Warming (GW), Non-Renewable Energy Use (NREU), Land Use (LU), Terrestrial Acidification (TA), and Freshwater Eutrophication (FE). All agronomic data of the Gladbacherhof research farm, averaged over the years 2010–2017, were included. When not directly measured on the farm, ecoinvent data were included. Results and discussion Contrary to our hypothesis, the results suggest that a grassland-based low-input system has a higher environmental impact as compared to a high-input system for each of the five impact categories when using fat and protein-corrected milk (FPCM) as the functional unit. A 50% reduction in concentrates and exclusion of maize silage from the feed ration in the modelled low-input production system lead to a 20% drop in milk yield. To balance the energy content in low-input feeding ration, longer grazing period and higher amount of hay, alfalfa, and grass silage are required. This in turn results in higher emissions from enteric fermentation, manure management, and feed production and hence in higher environmental impact, particularly for GW, TA, and FE. Conclusions This study is one of the few that directly explores the environmental impact of feeding intensity in an organic milk production system. Nevertheless, there is a lack of research on consolidated emission factors for several greenhouse gas (GHG) sources in organic livestock and cropping systems to perform more robust carbon footprint calculations that comply with the Intergovernmental Panel on Climate Change (IPCC) Tier 3 GHG reporting guidelines. To generalize the results at the regional or national scale, direct comparisons with a larger number of organic farms representative of high-input and low-input intensities are still essential.

Effect of management system and dietary seasonal variability on environmental efficiency and human net food supply of mountain dairy farming systems

Although mountain dairy cattle farming systems are pivotal for the economy, as well as for social and environmental aspects. They significantly contribute to the rural development which is currently strongly prioritized in the common EU agricultural policy, at the same time they are also increasingly criticized for having relatively high environmental impacts per kg of product, such as greenhouse gas emissions. Consequently, the aim of this study was to assess and compare the environmental efficiency of 2 common alpine dairy farming systems, with focus on the effects of grazing, considering the seasonal variability in feeding at individual cow level and farm management over a 3-year period. This study focuses on alpine farming systems but can be considered to represent well other topographically disadvantaged mountain areas. An intensively managed and globally dominating production system (high-input), aiming at high milk yield through relatively intensive feeding and the use of the high-yielding dual-purpose Simmental cattle, permanently confined in stables, was compared with a forage-based production system (low-input), based on seasonal grazing and the use of the autochthonous dual-purpose breed Tyrolean Grey. For the present analysis, a data set with information on feed intake and diet composition as well as animal productivity at individual cow level, and farm management data based on multiyear data recording was used. Four impact categories were quantified for 3 consecutive years: Global Warming Potential (GWP100), Acidification Potential (AP), Marine Eutrophication Potential (MEP), and Land Use (LU, m2yr and Pt, with the latter additionally considering the Soil Quality Index). Besides being attributed to 1 kg of fat and protein corrected milk (FPCM), these impact categories were also related to 1 m2 of on-farm area. Due to limited agronomic options beyond forage production and pasture use in alpine regions, net provision of protein was calculated for both farming systems to assess food supply and quantify the respective food-feed competition. Overall, the low-input farming system had greater environmental efficiency in terms of MEP per kg FPCM, as well as MEP and AP per m2 than the high-input system. LU was found to be consistently higher for the high-input than for the low-input system, the GWP100 per kg of FPCM was lower for the high-input system. Additionally, pasture access had a significant effect on the reduction of environmental impacts. Lastly, the net protein provision was slightly negative for the high-input system and marginally positive for the low-input system, indicating a lower food-feed competition for the latter. Future studies should also address the social and economic aspects of the farming systems, to offer a comprehensive overview of the 3 key factors necessary for achieving more sustainable farming systems, particularly in disadvantaged marginal regions such as mountain areas.

Millets and sorghum as promising alternatives to maize for enhancing climate change adaptation strategies in the Mediterranean Basin

ContextClimate change is increasingly requiring the adoption of both climate-resilient alternative crops and sustainable management practices. Millets and sorghum are increasingly recommended as alternatives to maize in addressing these issues, yet there are no studies comparing the environmental impacts of food-crop millets and sorghum with maize, under sustainable management in Mediterranean area. ObjectiveThe present study examined for the first time the environmental and economic impacts, as well as agronomic performances, of rainfed cultivated proso millet, sorghum and maize over a three-year period under challenging climatic conditions in Emilia-Romagna region, Italy. MethodsDifferent kinds of trials were realized during three years of experimentation in one location in Ravenna province. The first trial aimed to compare proso millet, sorghum and maize agronomical performances and water use efficiency in a low-input system. The second trial aimed to compare soil fertility and biodiversity impacts of two different agronomical management systems (low-input and high input) for the summer crops previously described. Soil basic fertility parameters were monitored and ground dwelling arthropods were collected and analyzed using pitfall traps. The last trial of this study intended to evaluate the environmental and economic performances of the previous cereal crops cultivated in the low-input and high-input systems, applying the Life Cycle Assessment (LCA) and the Life Cycle Costing (LCC) methodologies. ResultsBoth organic sorghum and millet showed high potential as viable summer-crop alternatives, not only to organic maize, based on yield, water use efficiency, disease tolerance and weed competition, but also to conventional maize, based on reduced environmental and economic impacts. Positive land impacts including improved beneficial arthropod abundances and preserved soil fertility were evident under organic management. In fact, the comparative LCA and LCC, carried out with primary data from conventionally cultivated maize and sorghum within central-north Italy and the organic experimental field under investigation, showed that the Global Warming and Eutrophication Potential, were comparable between the organically cultivated crops and significantly lower than conventional maize and sorghum. ConclusionsThe results highlighted the potential of sorghum and millet cultivation as rainfed summer-crop alternative to maize in climate-change context, especially in low-input agronomical systems. In particular, under rainfed, organic management over three years, proso millet yielded consistently. ImplicationsUnder the sustainable practices of the present study, proso millet outperformed maize for yield and WUE stability, as well as potential costs saved, related to the production amount per unit area and potential revenue.

Reducing Water, Nutrient, Pesticide, and Carbon Footprints and Costs for Drip-Irrigated Vine Crops with Compact Bed Plasticulture

Highlights Narrower and taller compact beds (CB) were designed to increase the system efficiency of drip-irrigated plasticulture. CB lowered water, fertilizer, plastic, pesticide, and fuel inputs while maintaining watermelon yield. CB reduced GHG emissions and input costs while increasing input productivity. CB are a synergistic and win-win climate-smart design to increase the sustainability of high-intensity plasticulture. Abstract. Raised bed plasticulture, used globally for producing high-value fruits and vegetables, is a high input and high intensity production system. We show that improved water and nutrient efficiency with reduced material inputs, costs, and carbon footprint is achieved with the use of taller and narrower plastic-mulched compact beds [61×30 (width × height in cm), 61×10, 46×30, and 41×30] compared to the wider and shorter conventional bed [76×20] used for growing watermelon. The primary motivation behind the compact bed design is to improve economic and environmental sustainability by reducing the bed width, to increase the fraction of the bed that is wetted by drip irrigation and to reduce the area of farmland covered under plastic. Compact beds were evaluated at two locations in South Florida with different hydrologic settings, using an ensemble of field data (inputs, plant health, yield, soil moisture, and nutrient levels) and a field-verified hydrologic model (HYDRUS). No reduction in yields was observed with compact beds, indicating no production risk for the growers. Compact beds conserve water and reduce deep percolation losses by 6 cm compared to conventional beds, thereby improving water productivity by 20%. Compact beds require less fertilizer (10%-50%) to maintain the same nutrient (N-P-K) concentrations as those in conventional beds because of smaller soil volumes. Reductions in water and fertilizer inputs provide the environmental benefit of reducing nutrient leaching to groundwater, while reduced impervious area reduces runoff losses. Compact beds reduced input (fertilizer, plastic mulch, pesticide, and diesel) costs of the system by US$720/ha and greenhouse gas emissions by 1630 kg CO2e/ha (9%) compared to conventional plasticulture. The annual cost savings create a win-win for farmers to increase profits and/or invest in conservation measures such as precision irrigation. Compact beds offer a climate change mitigation and adaptation strategy for the plasticulture system for watermelon and other similar cucurbit crops (e.g., cucumber, pumpkin, and zucchini). Keywords: Climate-Smart Agriculture, Economics, Greenhouse Gas Emissions, Nutrient Leaching, Sustainable Design, Water Conservation.

Post-Intensification Poaceae Cropping: Declining Soil, Unfilled Grain Potential, Time to Act.

The status and sustainability of Poaceae crops, wheat and barley, were examined in an Atlantic zone climate. Intensification had caused yield to rise 3-fold over the last 50 years but had also degraded soil and biodiversity. Soil carbon and nitrogen were compared with current growth and yield of crops. The yield gap was estimated and options considered for raising yield. Organic carbon stores in the soil (C-soil) ranged from <2% in intensified systems growing long-season wheat to >4% in low-input, short-season barley and grass. Carbon acquisition by crops (C-crop) was driven mainly by length of season and nitrogen input. The highest C-crop was 8320 kg ha-1 C in long-season wheat supported by >250 kg ha-1 mineral N fertiliser and the lowest 1420 kg ha-1 in short-season barley fertilised by livestock grazing. Sites were quantified in terms of the ratio C-crop to C-soil, the latter estimated as the mass of carbon in the upper 0.25 m of soil. C-crop/C-soil was <1% for barley in low-input systems, indicating the potential of the region for long-term carbon sequestration. In contrast, C-crop/C-soil was >10% in high-input wheat, indicating vulnerability of the soil to continued severe annual disturbance. The yield gap between the current average and the highest attainable yield was quantified in terms of the proportion of grain sink that was unfilled. Intensification had raised yield through a 3- to 4-fold increase in grain number per unit field area, but the potential grain sink was still much higher than the current average yield. Filling the yield gap may be possible but could only be achieved with a major rise in applied nitrogen. Sustainability in Poaceae cropping now faces conflicting demands: (a) conserving and regenerating soil carbon stores in high-input systems, (b) reducing GHG emissions and other pollution from N fertiliser, (c) maintaining the yield or closing the yield gap, and (d) readjusting production among food, feed, and alcohol markets. Current cropping systems are unlikely to satisfy these demands. Transitions are needed to alternative systems based on agroecological management and biological nitrogen fixation.

Soil microbial communities are sensitive to differences in fertilization intensity in organic and conventional farming systems.

Intensive agriculture has increased global food production, but also impaired ecosystem services and soil biodiversity. Organic fertilization, essential to organic and integrated farming, can provide numerous benefits for soil quality but also compromise the environment by polluting soils and producing greenhouse gases through animal husbandry. The need for reduced stocking density is inevitably accompanied by lower FYM inputs, but little research is available on the impact of these effects on the soil microbiome. We collected soil samples from winter wheat plots of a 42-year-old long-term trial comparing different farming systems receiving farmyard manure at two intensities and measured soil quality parameters and microbial community diversity through DNA metabarcoding. High-input fertilization, corresponding to 1.4 livestock units (LU) improved the soil's nutritional status and increased soil microbial biomass and respiration when compared to low-input at 0.7 LU. Bacterial and fungal α-diversity was largely unaffected by fertilization intensity, whereas their community structure changed consistently, accompanied by an increase in the bacterial copiotroph-to-oligotroph ratio in high-input systems and by more copiotrophic indicator OTUs associated with high than low-input. This study shows that reduced nutrient availability under low-input selects oligotrophic microbes efficiently obtaining nutrients from various carbon sources; a potentially beneficial trait considering future agroecosystems.

Soil carbon stocks in stable tropical landforms are dominated by geochemical controls and not by land use.

Soil organic carbon (SOC) dynamics depend on soil properties derived from the geoclimatic conditions under which soils develop and are in many cases modified by land conversion. However, SOC stabilization and the responses of SOC to land use change are not well constrained in deeply weathered tropical soils, which are dominated by less reactive minerals than those in temperate regions. Along a gradient of geochemically distinct soil parent materials, we investigated differences in SOC stocks and SOC (Δ14 C) turnover time across soil profile depth between montane tropical forest and cropland situated on flat, non-erosive plateau landforms. We show that SOC stocks and soil Δ14 C patterns do not differ significantly with land use, but that differences in SOC can be explained by the physicochemical properties of soils. More specifically, labile organo-mineral associations in combination with exchangeable base cations were identified as the dominating controls over soil C stocks and turnover. We argue that due to their long weathering history, the investigated tropical soils do not provide enough reactive minerals for the stabilization of C input in either high input (tropical forest) or low-input (cropland) systems. Since these soils exceeded their maximum potential for the mineral related stabilization of SOC, potential positive effects of reforestation on tropical SOC storage are most likely limited to minor differences in topsoil without major impacts on subsoil C stocks. Hence, in deeply weathered soils, increasing C inputs may lead to the accumulation of a larger readily available SOC pool, but does not contribute to long-term SOC stabilization.

Lime, inoculum, and phosphorous input supplementation under rain-fed soybean in Ghana's northern savannas

IntroductionRecent prices in soybean have spurred interest in motivating growers into input integration to improve yields across the northern savannas of Ghana. This requires more knowledge of input integration to increase soybean yield and profitability across production areas.Materials and methodA 3-yr study was conducted in three locations at Manga, Nyankpala, and Wa in Ghana's northern savanna to identify the best-yielding input combination under a rain-fed environment. The experiment used “Jenguma” soybean cultivar with lime, inoculum, and phosphorus in a 2 × 2 × 2 factorial arrangement with four replications. Eight treatment combinations (control included) were used to assess soybean yield, yield components, rain use efficiency, and economic profitability. The single-input application of lime (T1), inoculum (T2), and phosphorus (T4) was the low-input, lime × inoculum (T3), lime × phosphorus (T5), and (inoculum × phosphorus) (T6) as medium input, T7 (lime × inoculum × phosphorus) was high input, and a no-input treatment (control).ResultsThe soils were inherently low in fertility, and weather variability during the reproductive stages was a significant limiting factor to improving grain yield across locations. Grain yield was highest in 2017 at Manga and Nyankpala, but in 2019 at Wa. Except at Manga, grain yield and rain use efficiency (RUE) were highest in the high input system (T7). However, marginal net benefits (MNB) and marginal rate of returns (MRR) were highest in the low input system (T2) across locations. The low (T1) and medium (T3) input systems (except Nyankpala) were dominant for MNB and MRR due to the high cost of the lime product.DiscussionThese results suggest that smallholder farmers prefer low input (T2) with the least cost of production and the highest marginal net benefit and marginal rate of returns. Nevertheless, producers would have to evaluate their resource base and the cost of nutrient integration for sustainability.ConclusionThis paper recommends further studies on lime rates to determine profitability, lime's long-term (residual) effect, and the synergic impact of inoculum and phosphorus.

Investigation of Energy and Economic Balance and GHG Emissions in the Production of Different Cultivars of Buckwheat (Fagopyrum esculentum Moench): A Case Study in Northeastern Poland

Every type of agricultural production is a burden for the natural environment. The paper’s objective is to assess the energy use efficiency, GHG emissions, and provide an economic analysis of buckwheat production for Central Europe (Poland). The analysis and comparison involved two production systems: low-input and high-input ones. The experiment involved three varieties of buckwheat, Panda, Volma, and Mancan. The yields for analysis were obtained from the field experiment which was set up in 3k-p fractional design was applied in two replications in which at the same time five factors were tested (A—variety, B—mineral fertilisation, C—sowing rate, D—weed control, E—growth regulator). A quartile was used as a statistical tool to select production systems. A high-input buckwheat production regime required, on average, 74.00% more energy than a low-input system. The total mean energy input for three varieties ranged from 7532.7 to 13,106.9 MJ ha−1 for low- and high-input systems, respectively. The results show that the energy use efficiency, specific energy, and net energy gain for the low-input system were on average 1.51, 9.6 MJ kg−1, and 3878.8 MJ ha−1, respectively, for the investigated varieties. For the high-input system, it was 1.35, 10.9 MJ kg−1, 4529.9 MJ ha−1, respectively. The total CO2 equivalent emissions during buckwheat production were higher for the high-input system than for the low-input system by more than 40%. The economic analysis demonstrated that the high-input system had better economic efficiency (without EU payment), 1.01 on average, than the low-input system, 1.07 on average. The international literature does not offer research on energy analysis for the production of common buckwheat and GHG emissions. The findings of this study demonstrate how the production systems affect energy and economic efficiency as well as GHG emissions. The authors suggest further research in Europe and globally, particularly on the energy use efficiency and GHG emissions in the production of common buckwheat, to verify the present results and improve production technologies (reduce inputs and costs).

Helicoverpa genus on the edge of the continental U.S.: Flight phenology, analysis of hybrid presence, and insecticide performance in high-input field crops in Puerto Rico.

The genus Helicoverpa includes several agricultural pests globally. Helicoverpa armigera was reported in several countries in South America in 2013, and in Puerto Rico, in 2014. This territory is considered an agricultural hub, with a high-input system of seed production in the southern region of the island, and also at the edge of the continental U.S. Possible natural dispersion of populations of H. armigera from the Caribbean or other Central American regions poses a continuing risk to the U.S. This study was performed during the post-detection scenario of H. armigera in Puerto Rico, from 2018 to 2021. A year-round pheromone trapping program of adult males indicated an increase in the population from October to March and differences in the occurrence of Helicoverpa spp. between the municipalities Juan Diaz and Salinas. The proportion of H. armigera/H. zea and detection of congeneric hybrids between these species were assessed based on genital morphology and DNA analysis. Interestingly, neither H. armigera nor expected hybrids were detected in the present study. The susceptibility of H. zea populations to the insecticides Spinetoram, Emamectin benzoate, Chlorantraniliprole, and Esfenvalerate was assessed, and an overall significant effect of insecticide susceptibility was detected. Chlorantraniliprole and Emamectin benzoate had the highest efficacy. These results contribute to the Integrated Pest Management and Insect resistance management programs to Helicoverpa spp. in Puerto Rico. In addition, provide validated information to be considered in mitigation plans, in the scenario of an invasion of H. armigera in the continental U.S.

The cocoa yield gap in Ghana: A quantification and an analysis of factors that could narrow the gap

CONTEXTGlobal cocoa production is largely concentrated in West Africa where over 70% of cocoa is produced. Here, cocoa farming is largely a rain-fed, low-input system with low average yields, which are expected to decline with climate change. With increasing demand, there is a need to evaluate opportunities to increase production whilst avoiding deforestation and expansion to croplands. Thus, it is important to know how much additional cocoa can be produced on existing farmland, and what factors determine this potential for increased yield. OBJECTIVEThe objective was to quantify the cocoa yield gap in Ghana and identify the factors that can contribute to narrowing the gap. METHODSWe calculated the cocoa yield gap as the difference between potential yield (i. water-limited potential(Yw) quantified using a crop model, ii. attainable yield in high-input systems(YE), iii. attainable yield in low-input systems(YF)) and actual farmer yield. Both absolute and relative yield gaps were calculated. We then related each yield gap (absolute & relative) as a function of environment and management variables using mixed-effects models. RESULTS AND CONCLUSIONSThere were considerable yield gaps on all cocoa farms. Maximum water-limited yield gaps (YGW) were very large with a mean absolute gap of 4577 kg/ha representing 86% of Yw. Attainable yield gap in high-input (YGE) was lower with mean absolute gap of 1930 kg/ha representing 73% of YE. The yield gap in low-input (YGF) was even lower with mean absolute gap of 469 kg/ha representing 42% of YF. Mixed-effects models showed that, absolute YGW were larger at sites with higher precipitation in the minor wet and minimum temperature in the minor dry season explaining 22% of the variability in YGW. These same factors and cocoa planting density explained 28% of variability in absolute YGE. Regardless of climate, absolute YGF and relative YGW, YGE and YGF were reduced by increasing cocoa planting density and application of fungicide against black pod. The models explained 25% of the variability in absolute YGF, and 33%, 33% and 25% in relative YGW, YGE and YGF respectively.In conclusion, climate determined absolute YGW in Ghana whilst absolute YGE were determined by both climate and management. In contrast, absolute YGF and relative YGW, YGE and YGF can be reduced by agronomic management practices. SIGNIFICANCEOur study is one of the first to quantify cocoa yield gaps in West Africa and shows that these can be closed by improved agronomic practices.

Modulation of Wheat Yield Components in Response to Management Intensification to Reduce Yield Gaps.

Appropriate genotype selection and management can impact wheat (Triticum aestivum L.) yield in dryland environments, but their impact on yield components and their role in yield modulation are not well understood. Our objectives were to evaluate the yield response of commercial winter wheat genotypes to different management practices reflecting a stepwise increase in management intensity (including a reduction in crop density under high input), and to quantify how the different yield components modulate wheat yield. A factorial experiment evaluated six management (M) intensities [“farmer practice” (FP), “enhanced fertility” (EF), “ecological intensification” (EI), “increased foliar protection” (IFP), “water-limited yield” (Yw), and “increased plant productivity” (IPP)] and four winter wheat genotypes (G) in four Kansas environments (E). Average grain yield was 4.9 Mg ha–1 and ranged from 2.0 to 7.4 Mg ha–1, with significant two-way interactions (E × M and E × G). The EF usually maximized yields in dry environments, while EI, which consisted of EF plus one fungicide application, maximized yields in environments with greater water availability. Across all sources of variation, kernels m–2 and aboveground biomass were the strongest modulators of yield as compared to kernel weight and harvest index, while spikes m–2 and kernels spike–1 modulated yields at a similar magnitude. Foliar fungicides improved yield through increased green canopy cover duration and greater radiation intercepted during grain filling. When crop density was reduced from 2.7 to 1.1 million plants per hectare in an otherwise high-input system, plants produced more productive tillers (with genotype-specific response); however, reduced green canopy cover at anthesis and reduced cumulative solar radiation intercepted during grain filling limited wheat yield—although large differences in canopy cover or intercepted radiation were needed to cause modest changes in yield. Treatments more intensive than EI were not warranted as EF or EI maximized yields at all environments, and practices that promote biomass and kernels m–2 are to be targeted for future increases in wheat yield.

Harnessing root architecture to address global challenges.

SUMMARYRoot architecture can be targeted in breeding programs to develop crops with better capture of water and nutrients. In rich nations, such crops would reduce production costs and environmental pollution and, in developing nations, they would improve food security and economic development. Crops with deeper roots would have better climate resilience while also sequestering atmospheric CO2. Deeper rooting, which improves water and N capture, is facilitated by steeper root growth angles, fewer axial roots, reduced lateral branching, and anatomical phenotypes that reduce the metabolic cost of root tissue. Mechanical impedance, hypoxia, and Al toxicity are constraints to subsoil exploration. To improve topsoil foraging for P, K, and other shallow resources, shallower root growth angles, more axial roots, and greater lateral branching are beneficial, as are metabolically cheap roots. In high‐input systems, parsimonious root phenotypes that focus on water capture may be advantageous. The growing prevalence of Conservation Agriculture is shifting the mechanical impedance characteristics of cultivated soils in ways that may favor plastic root phenotypes capable of exploiting low resistance pathways to the subsoil. Root ideotypes for many low‐input systems would not be optimized for any one function, but would be resilient against an array of biotic and abiotic challenges. Root hairs, reduced metabolic cost, and developmental regulation of plasticity may be useful in all environments. The fitness landscape of integrated root phenotypes is large and complex, and hence will benefit from in silico tools. Understanding and harnessing root architecture for crop improvement is a transdisciplinary opportunity to address global challenges.

Consumer-Transformer Relationship Identification Based on Two-scale similarity and SC Algorithm

In view of the chaotic relationship between user-transformer in the current low-voltage stations, manual identification consumes a long time period, low identification accuracy, and high input system costs. This paper proposes a method for identifying household change relations in low-voltage stations based on dual-scale similarity and spectral clustering algorithm. First, according to the different similarities of user voltage curves in different stations, consider Euclidean distance and cosine distance to establish a two-scale spectral clustering similarity matrix from the distance and shape of the voltage curve. Then based on the two-scale similarity matrix, perform spectral clustering on the voltage curves of the same station area to complete the clustering of users in the same station area. Examples show that the method proposed in the article has high recognition accuracy, low input cost, and has good application effects.

Characteristics of Organically Grown Compared to Conventionally Grown Potato and the Processed Products: A Review

Interest in organic foods is increasing at a moment when humanity is facing a range of health challenges including the concern that some conventionally produced foods may pose possible adverse effects on human and livestock health. With the increasing human population, intensive production is increasingly trending towards high-input systems that aim to close yield gaps, increase crop yields, and develop new crop varieties with higher yield potential and tolerance to biotic and abiotic stresses, all within the context of incorporating specific traits to satisfy consumer demand. Potato (Solanum tuberosum L.) is one of the most consumed foods under different cultural diets; however, its production faces some challenges related to soilborne diseases, marketable yield and quality, sugars and dry matter content of the produced tubers, tuber content in terms of nitrate, minerals, vitamins, bioactive compounds, and antioxidants, and consumer appreciation regarding the sensory characteristics of tubers and processed products. Different studies have been investigating some of these challenges, with sometimes straightforward and sometimes conflicting results. This variability in research results indicates the general non-transferability of the results from one location to another under the same management practices in addition to differences in plant material. This review compares some characteristics of raw or boiled potato and processed products from potato tubers grown organically and conventionally. Ideally, such information may be of benefit in decision making by consumers in their dietary choices, by potato growers in their selection of crop management practices, and by scientists looking at potential areas for future research on potatoes.

A Review of Beef Production Systems for the Sustainable Use of Surplus Male Dairy-Origin Calves Within the UK.

The UK dairy herd is predominantly of the Holstein-Friesian (HF) breed, with a major emphasis placed on milk yield. Subsequently, following years of continued single-trait selection, the beef production potential of dairy bred calves has declined. Thus, male HF calves are commonly seen as a by-product of the dairy industry. Limited markets, perceived low economic value and high rearing costs mean that these surplus calves are often euthanised shortly after birth or exported to the EU for further production. Welfare concerns have been raised regarding both euthanasia and long distance transportation of these calves. Furthermore, total UK beef consumption increased by 8.5% from 2009 to 2019. Thus, in light of this growing demand, beef from the dairy herd could be better utilized within the UK. Therefore, the potential for these calves to be used in a sustainable, cost-effective beef production system with high welfare standards within the UK requires investigation. Thus, the aim of this review was to evaluate both steer and bull beef production systems, examining the impact on performance, health, welfare, and economic potential to enable a sustainable farming practice, while meeting UK market requirements. The principal conclusions from this review indicate that there is the potential for these calves to be used in UK based production systems and meet market requirements. Of the steer production systems, a 24 month system appears to achieve a balance between input costs, growth from pasture and carcass output, albeit the literature is undecided on the optimum system. The situation is similar for bull beef production systems, high input systems do achieve the greatest gain in the shortest period of time, however, these systems are not sustainable in volatile markets with fluctuating concentrate prices. Thus, again the inclusion of a grazing period, may increase the resilience of these systems. Furthermore, production systems incorporating a period at pasture are seen to have animal welfare benefits. The main welfare concern for surplus dairy bred calves is often poor colostrum management at birth. While in steer systems, consideration needs to be given to welfare regarding castration, with the negative impacts being minimized by completing this procedure soon after birth.

Life cycle assessment of alfalfa production and potential environmental improvement measures in Northwest China

Alfalfa is an important legume forage crop and environmental impacts of producing it differ with its production systems and regions. Despite its high water consumption, a comprehensive assessment of combining water consumption with other environmental impacts has not been carried out. The objectives of this study were to evaluate water consumption and other important environmental indicators for four main alfalfa production systems in Northwest China and to investigate improvement measures to reduce environmental impacts. A life cycle assessment approach coupled with CropWat modelling was used for the study. Compared with the low agricultural input systems NFNI (no fertilization or irrigation) and AFNI (applying fertilizer without irrigation), the high agricultural input systems AFRI (fertilization and irrigated with river-water) and AFWI (fertilization and irrigated with well-water) achieved higher yields with lower land use (LU), but led to higher environmental impacts on water resource consumption (WRC), global warming potential (GWP) and other impacts. Except for LU, the NFNI system had the least impacts on almost all environmental indicators, while the AFWI had the most adverse impacts. A trade-off between LU, WRC, GWP and other impacts was observed when single improvement measures were taken in the systems AFRI and AFWI. However, optimised combination of the measures such as reducing N fertilizer rate, deficit irrigation and sprinkle-irrigating can generally decrease impacts for most environmental indicators, except for LU. It is difficult to achieve high alfalfa yield while saving water consumption and also reducing GWP and other environmental indicators in a specific production system. However, increasing average yield in the whole region and decreasing environmental impacts can be achieved to some extent through adjusting the production systems with optimised combination measures. Accordingly, the AFNI production system for the semi-arid area and the AFRI system for the arid area are recommended. The study highlights the importance of considering water and land resources along with assessing other impacts of agriculture products when performing a comparison between farming systems and improvement measures.

Towards an ideotype for food-fuel dual-purpose wheat in Argentina with focus on biogas production

BackgroundWheat straw, one of the most abundant agricultural residues worldwide, can be used to produce biogas, which is considered one of the most efficiently produced renewable energies. Wheat grown with the dual-purpose of producing food and biogas should display simultaneously high grain and straw yields, low lodging susceptibility and high conversion efficiency of straw into biogas. The aims of this study were to determine the best food-fuel dual-purpose wheat candidates among 36 wheat genotypes—including French, CIMMYT and local (Criollo) germplasm—used in breeding programs in Argentina and to gain some insights into the relationships between key traits relevant for dual-purpose wheat genotypes.ResultsHigh variability in individual key traits for dual-purpose wheat ideotype has been found. Genotypes of French origin displayed the highest grain yield, and those of CIMMYT origin, the lowest straw yield. Genotypes of Criollo origin showed the highest lodging susceptibility, and French ones, the lowest. Straw yield was positively correlated with grain yield in all genotypes, and negatively correlated with plant height in genotypes of Criollo origin. Straw conversion into biogas was measured in terms of the biogas potential production and kinetic parameters Bmax (maximum specific biogas production) and k (first-order kinetic constant) were analyzed. All key traits were analyzed together by a principal component analysis. Baguette 31 and SNR Nogal, two genotypes of French origin, showed high grain yield, high-to-very high straw yield, low lodging susceptibility, and moderate-to-high Bmax and k. Buck Guapo and Buck Baqueano, two genotypes of Criollo origin, displayed good values for grain yield, straw yield and Bmax and k. However, their high lodging susceptibility precludes their production in shallow soils or high-input systems. Lastly, some old genotypes (e.g. Klein Atlas) harbored a good combination of all key traits and could prove valuable to be included in future breeding programs for dual-purpose wheat.ConclusionsWhile none of the genotypes excelled in every key trait, a few candidates showed potential for dual-purpose ideotype, particularly Baguette 31 and SNR Nogal. The challenge lays in gathering all attributes for food and 2G fuel in the same genotype.