High-gain Antenna Research Articles

A Wideband High-Gain Multilinear Polarization-Reconfigurable Antenna Integrated With Nonuniform Partially Reflective Surface

A Wideband High-Gain Multilinear Polarization-Reconfigurable Antenna Integrated With Nonuniform Partially Reflective Surface

Low Sidelobe Level, High-Gain Patch Antennas Operating at Higher-Order Modes

Low Sidelobe Level, High-Gain Patch Antennas Operating at Higher-Order Modes

Directivity Improved Antenna with a Planar Dielectric Lens for Reducing the Physical Size of the On-Vehicle Communication System.

As the physical size of a communication system for satellites or unmanned aerial vehicles demands to be reduced, a compact antenna with high directivity is proposed as a core element essential to the wireless device. Instead of using a horn or an array antenna, a unit planar antenna is combined with a surface-modulated lens to convert a low antenna gain to a high antenna gain. The lens is not a metal-patterned PCB but is dielectric, which is neither curved nor very wide. This palm-sized lens comprises pixels with different heights from the backside of PolyPhenylene Sulfide (PPS) as the dielectric base. The antenna gain from the unit antenna of 4.5 cm × 4.5 cm is enhanced by 10 dB with the help of a compact dielectric lens of 7.5 cm × 7.5 cm at 24.5 GHz as the frequency of interest. The antenna design is verified by far-field measurement as well as near-field observation, including sensing a metal object behind a blocking wall by using an RF test bench. Moreover, antenna performance is understood by making a comparison with conventional designs of antennas in terms of directivity and physical sizes.

Wide-angle low-scattering transmitarray antenna based on transmit-reflect selective metasurface

Abstract A high-gain transmitarray antenna with low radar cross section (RCS) properties is presented in this paper. Compared with conventional high-profile multilayer designs, we introduce a transmit-reflect selective metasurface integrated with high-gain transmission and random scattering functions, achieving a reduced thickness of 0.13 λ 0 (where λ 0 is the wavelength at the center frequency). For the meta-atom design, we combine geometric rotation and dimension optimization to realize 1-bit independent transmit and reflection phase modulation, respectively. Moreover, in metasurface coding strategy, we employ an initial phase optimization method and a simulated annealing algorithm to determine the optimal coding matrices. The experimental results demonstrate high-performance radiation characterized by the peak gain of 23.6 dB, maximum aperture efficiency of 28.5%, and 3 dB gain bandwidth of 18.4%. For x-polarization, measured 10 dB RCS reduction bandwidth under transverse magnetic (TM) 0°-45° and transverse electric (TE) 0°-20° incidence are 9.02–11.36 GHz. For y-polarization, 10 dB RCS reduction bandwidth under TM 0–60° and TE 0–30° incidence is 8.82–10.96 GHz.

Compact high gain and high isolation AMC-coupled MIMO antenna for wideband 5G millimeter wave applications

Compact high gain and high isolation AMC-coupled MIMO antenna for wideband 5G millimeter wave applications

High-Gain Multi-Band Koch Fractal FSS Antenna for Sub-6 GHz Applications

This study introduces a novel antenna based on the binary operation of a modified circular patch in conjunction with the Koch fractal. The antenna is intended for applications in the sub-6 GHz band, partial C-band, and X-band. The low-cost antenna is fabricated on a 1.6-mm-thick FR-4 substrate. A frequency-selective surface (FSS) is used to overcome the decreased values of the gain and bandwidth due to the fractal operations. The introduced split ring resonator (SRR) and the antenna substrate dimension reduction reduce the bandwidth and antenna gain. The air gap between the FSS and the antenna not only enhances the antenna gain but also controls the frequency tuning at the design frequency. The antenna size is miniaturized to 36.67%. A monopole antenna ground loaded with an SRR results in improved closest tuning (3.44 GHz) near the design frequency. The antenna achieves a peak gain of 9.37 dBi in this band. The FSS-based antenna results in a 4.65 dBi improvement in the gain value with the FSS. The measured and simulated plots exhibit an excellent match with each other in all three frequency bands at 2.96–4.72 GHz. These bands cover Wi-MAX (3.5 GHz), sub-6 GHz n77 (3300–3800 MHz), n78 (3300–4200 MHz), and approximately n79 (4400–4990 MHz), in addition to C-band applications.

Advanced directional beam control via holographic acoustic metasurfaces for multibeam scanning

Acoustic multi-beam leaky-wave antennas, designed with holographic metasurfaces, have great potential for beamforming by achieving directional beam control. We propose a planar holographic metasurface for beam steering using multi-beam acoustic radiation serving as high-gain acoustic leaky wave antennas. Based on the principle of holography, we designed a metasurface that adjusts its admittance in a sinusoidal pattern. This surface consists of periodic cylindrical holes with varying depth profiles. A monopole point source is positioned in the middle of the patterned surface, which generates surface waves on the modulated surface and emits acoustic leaky-wave radiation in the desired directions. The holographic admittance surface is designed to radiate an acoustic beam at a frequency of 20 kHz. Additionally, the concept was extended to generate multi-beam scanning for forward leaky-wave radiation in the holographic process. In this research, we employed 3D additive manufacturing to create acoustic holograms, manipulating surface admittance variation at a resolution smaller than the wavelength. The experimental measurements aligned well with both the theoretical and numerical analysis findings, affirming the effectiveness of the proposed technique. The methodology exhibits broad applicability across various domains, including sonar, ultrasound imaging, waveform manipulation, and acoustic communication.

Design and Implementation of a Ka-band Folding Rib Mesh Antenna for CubeSats

In the past decade, CubeSats have undergone a revolution, moving from university research projects to enabling industry opportunities and government missions. In 2014, the Jet Propulsion Laboratory, California Institute of Technology (JPL/Caltech) initiated a research and technology development effort to advance CubeSat communication capabilities. One of the critical thrusts was the Ka-band parabolic deployable antenna (KaPDA). This antenna started with the ambitious goal of fitting a 42 dB, 0.5 m, 35 GHz antenna in a 1.5U canister. At that time, there had been minimal development in high-gain CubeSat antennas, critical for high-data-rate communications and remote sensing science. A Ka-band high-gain antenna would provide a 10,000 times increase in data communication rates over an X-band patch antenna and a 100 times increase over state-of-the-art S-band parabolic antennas. This paper discusses designing, building, integrating, and operating the flight antenna from a mechanical perspective, its final performance, and lessons learned. KaPDA enabled the RainCube mission, the first Earth Science CubeSat to have an active instrument. RainCube was launched in May 2018, making KaPDA the second deployable parabolic antenna to fly on a CubeSat and the first to operate in Ka-band, enabling follow-on opportunities for high-rate antenna communications and remote sensing science.

High-Gain Circularly Polarized Array Antenna Based on High-Order Mode ESIC for 5G Millimeter-Wave Application

High-Gain Circularly Polarized Array Antenna Based on High-Order Mode ESIC for 5G Millimeter-Wave Application

A High-Gain Antipodal Vivaldi Antenna Operating at 1 GHz to 40 GHz for Photonic-Assisted Receiver

A High-Gain Antipodal Vivaldi Antenna Operating at 1 GHz to 40 GHz for Photonic-Assisted Receiver

A High-Gain Filtering Quasi-Yagi Antenna Based on Compressed Third-Order Mode Dipole

A High-Gain Filtering Quasi-Yagi Antenna Based on Compressed Third-Order Mode Dipole

A high gain microwave and millimeter-wave-based balanced antipodal Vivaldi antenna with a parasitic patch and a half-spherical shaped dielectric lens

This paper presented the design and performance analysis of a high-gain balanced antipodal Vivaldi antenna (BAVA) integrated with a parasitic patch and a half-spherical shaped dielectric lens, specifically designed for microwave and millimeter-wave applications. Constructed with a Teflon substrate (εr = 2.1, tanδ = 0.0002) and energized by a 50-ohm microstrip feedline, the innovative design incorporated a parasitic patch and three different types of dielectric lenses: half-circular, conical, and half-spherical shaped. The half-spherical dielectric lens significantly enhanced performance, achieving a gain of 20.54 dB, side lobe level (SLL) of -18.15 dB, and a maximum beam squint of 1.59 degrees. Additionally, it exhibited a 98% radiation efficiency, a front-to-back ratio of 31.75 dB, and a half-power beamwidth (HPBW) of 6.7 degrees. The incorporation of a parasitic patch and a half-spherical shaped dielectric lens enhanced the antenna's performance. Comparative analysis with existing antennas underscored the superiority of the proposed design, positioning it as a promising solution for microwave and millimeter-wave communication systems, radar, and sensing applications.

Physical analysis of high refractive index metamaterial-based radiation aggregation engineering of planar dipole antenna for gain enhancement of mm-wave applications

A metamaterial-incorporated high-gain and broadband dipole antenna is proposed for 5G mm-wave applications. The designed high refractive index metamaterial (HRIM) properties are presented in detail with supporting results. The proposed dipole antenna achieved broadband features, and the antenna gain increased significantly by incorporating HRIM in the electromagnetic (EM) wave propagation path. Besides, the EM wave aggregation engineering of utilizing the HRIM on the dipole antenna is analyzed using the electric field, magnetic field, and power flow distributions. Both conventional and HRIM-based dipole antenna (HRIMDA) were fabricated on thin (0.254 mm) Rogers RT5880 substrate material with a low dielectric constant of 2.2, where the noticeable gain enhancement by HRIM is observed. The measured results show the operational bandwidth (BW) from 23 to 38 GHz frequency, and the highest gain of 9.5 dBi is accomplished at 35 GHz frequency. Finally, a four-element MIMO configuration is numerically and experimentally analyzed where the isolation of the two conjugated MIMO elements is < − 20 dB. The MIMO parameters like envelop correlation coefficient (ECC) < 1 × 10–3 and diversity gain (DG) value of > 9.9 were also achieved. Hence, the proposed HRIM base dipole antenna is a potential candidate for 5G mm-wave applications.

A High-Gain, High-Efficiency Transparent and Flexible Antenna for Vehicular Communication

A high-gain high-efficiency flexible and transparent film antenna in millimeter-wave is proposed in this paper. Comb structure which can be regarded as developed from the grid array structure is employed to mitigate the loss of the feeding network caused by the lossy metal mesh. The gain of the antenna has low sensitivity to the sheet resistance, which is promising in developing large-scale and high-performance transparent antenna. A large-scale ([Formula: see text]@28[Formula: see text]GHz) antenna is designed and fabricated using transparent metal mesh film with sheet resistance of 0.1[Formula: see text][Formula: see text]/sq and a thin PET film substrate. Bending measurement shows the antenna has excellent mechanical flexibility. A peak gain of 15.92[Formula: see text]dBi, radiation efficiency of 65.1%, optical transparency of 84% and 1,000-times bending are obtained. To the best of our knowledge, it is the highest gain and radiation efficiency flexible-transparent antenna reported thus far, which provides a glass-integrated antenna solution for vehicular communication.

Dual-Band Passive Beam Steering Antenna Technologies for Satellite Communication and Modern Wireless Systems: A Review.

Efficient beam steerable high-gain antennas enable high-speed data rates over long-distance networks, including wireless backhaul, satellite communications (SATCOM), and SATCOM On-the-Move. These characteristics are essential for advancing contemporary wireless communication networks, particularly within 5G and beyond. Various beam steering solutions have been proposed in the literature, with passive beam steering mechanisms employing planar metasurfaces emerging as cost-effective, power-efficient, and compact options. These attributes make them well-suited for use in confined spaces, large-scale production and widespread distribution to meet the demands of the mass market. Utilizing a dual-band antenna terminal setup is often advantageous for full duplex communication in wireless systems. Therefore, this article presents a comprehensive review of the dual-band beam steering techniques for enabling full-duplex communication in modern wireless systems, highlighting their design methodologies, scanning mechanisms, physical characteristics, and constraints. Despite the advantages of planar metasurface-based beam steering solutions, the literature on dual-band beam steering antennas supporting full duplex communication is limited. This review article identifies research gaps and outlines future directions for developing economically feasible passive dual-band beam steering solutions for mass deployment.

A High Gain and Compact CPW-fed UWB Antenna Based on a Novel Frequency Selective Surface with Angular Stability

A High Gain and Compact CPW-fed UWB Antenna Based on a Novel Frequency Selective Surface with Angular Stability

Smart Transfer Planer with Multiple Antenna Arrays to Enhance Low Earth Orbit Satellite Communication Ground Links

In this study, we propose a smart transfer planer equipped with multiple antenna arrays to improve ground links for low Earth orbit (LEO) satellite communication. The STP features a symmetrical structure and is strategically placed on both ends of a window, serving both indoor and outdoor environments. Using the window glass as a medium, energy transmission occurs through a coupling mechanism between the planers. The design focuses on large array antenna design, beamforming networks, and coupler design on both sides of the glass. Beamforming networks enable the indoor and outdoor antenna arrays to switch beams in various directions, optimizing high-gain antennas with narrow beamwidths. Through electromagnetic induction and filter couplers, a robust signal transmission channel is established between indoor and outdoor environments. This setup significantly enhances communication efficiency, particularly in non-line-of-sight environments.

Two-layered optimized metamaterial antenna with high gain and wide bandwidth for 5G mm-Wave applications

A two-layered high gain and wide bandwidth metamaterial antenna working at 29 GHz for mm-Wave applications is proposed in this paper. The metamaterial antenna has an overall compact size of 12.5 x 12.5 x 7.28 mm3. It is realized with a Rogers Duroid 5880 dielectric layer 0.78 mm thick used as substrate and a Rogers RO3010 dielectric layer 1.5 mm thick at distance 5 mm above the radiation element. The radiation element is composed of a square-cut-at-the-four-corners, patch antenna with probe pin feeding. In addition, for further antenna performance enhancement, negative refractive index printed metamaterials surround the patch antenna offering bandwidth and gain enhancement. Simulated results show a significantly wide bandwidth of 7.91 GHz ranging from 26.04 GHz to 33.95 GHz and a high peak realized gain of 12.2 dB. These features make the antenna a good candidate for 5G mm-Wave applications.

Circularly Polarized High-Gain K-Band Liquid Crystal Phased Array Antenna

Circularly Polarized High-Gain K-Band Liquid Crystal Phased Array Antenna

A Low-Profile and High-Gain Antenna With Bidirectional Beams Enabled by Integrating Folded Transmitarray and Fabry–Perot Cavity

A Low-Profile and High-Gain Antenna With Bidirectional Beams Enabled by Integrating Folded Transmitarray and Fabry–Perot Cavity