High Extraction Research Articles

СОВЕРШЕНСТВОВАНИЕ СПОСОБА ПОЛУЧЕНИЯ УСНИНОВОЙ КИСЛОТЫ ИЗ РАСТИТЕЛЬНОГО СЫРЬЯ ИСЛАНДСКОГО МХА

Relevance. Contemporary pharmaceutical industry requires constant search and development of new technologies for the production of pharmacological products. At the same time, the processing of plants, which contain substances with a therapeutic effect, is a promising direction. Their use in terms of economic and therapeutic effectiveness is sometimes very beneficial. It has been proven that lichen plants contain substances that have a therapeutic effect. Organisms of the genus Cladonia, which synthesize usnic acid, among them have a special significance and application. The extraction of usnic acid from lichen biomass is carried out using various organic solvents. At the same time, it is preferable to use techniques with the lowest cost with a high quantitative yield of extractives. In addition, extracts containing bioactive substances should exhibit significant biological activity. The aim is improving the technology of extraction of usnic acid from the vegetable raw materials of Cladonia rangiferina Hoff by determining the optimal components for its extraction. Materials and methods. The material for the study is raw material of Yagel (Deer Moss)/Cladonia rangiferina Hoff. The extractive properties of the most commonly used solvents (purified water, ethyl alcohol 40, 70 and 95%) were studied, among which the most effective was identified. The content of extractive substances was determined by the gravimetric analysis method. The results of the study. According to the results of a series of experiments to study extractive capabilities, of all solvents, the maximum extractive ability of extractive substances from Cladonia rangiferina Hoff was noted for 95% ethyl alcohol (7.38%). Ethyl alcohol 70% was produced with a high extraction capacity, however, it turned out to be less effective. The conclusion was made about these methods can be used to detect biologically active substances obtained from the raw materials of Cladonia rangiferina Hoff. The obtained developments create prerequisites for the development of regulatory documentation on the procedure and position of the relevant standard or a temporary pharmacopoeia article.

PHOTOINACTIVATION OF CANDIDA ALBICANS BIOFILM WITH GREEN LASER MEDIATED BY THE PAPAYA LEAF EXTRACT CHLOROPHYLL

This study aims to activate the effectiveness of Photodynamic Inactivation (PDI) as an antibacterial agent by using a green laser and papaya leaf chlorophyll extract to prevent Candida albicans cell death. Papaya leaf extract chlorophyll is known to have potential as a photosensitizer (PS) through its antimicrobial properties and ability to absorb optimal light photons at a wavelength range of 405–680 nm. Activation of chlorophyll molecules with appropriate light produces Reactive Oxygen Species (ROS), which are toxic to pathogenic microbes such as Candida albicans. The research method involves using PDI with a green laser light source and chlorophyll extract on Candida albicans biofilms. Four main treatment groups were applied, negative control (C-), positive controls with 10% (C1+) and 15% chlorophyll (C2+), irradiation for 60, 120, 180, 240, and 300 seconds (L1–L5), and combinations of irradiation with chlorophyll (L1F1–L5F2, where F1 for 10% chlorophyll and F2 for 15% chlorophyll), with measurements performed three times for each treatment. Living Candida albicans cells were detected using the XTT assay staining method. The results showed a significant decrease in activity in all treatment groups. Maximum activity was achieved in the L5F1 and L5F2 treatment groups with inactivation of 80% (p<0.05) and 83% (p<0.05), respectively. This study concludes that high papaya leaf extract chlorophyll concentrations combined with a green laser effectively inhibit Candida albicans biofilm.

Characterization, fractionation and untapped potential of phosphate-amended sewage sludge biochar in soil-plant systems

Sewage sludge, a byproduct of wastewater treatment, poses serious environmental and health risks due to its content of organic contaminants, heavy metals, and pathogenic microorganisms. With the growing global production of municipal wastewater, finding effective methods for managing and disposing of sewage sludge has become increasingly urgent. Traditional methods such as land disposal, dumping, and incineration have limitations and environmental drawbacks. However, recent advancements have shown promise in the valorization of sewage sludge, particularly through pyrolysis, which converts it into biochar for use in soil amendment and pollutant mitigation. This study aims to characterize and fractionate phosphate-amended sewage sludge biochar produced at 300 °C, 400 °C, and 500 °C, and to evaluate its potential use in soil-plant systems. It examines nutrient bioavailability in soil after the addition of this biochar and its effects on plant growth. The pyrolysis process resulted in biochar with high alkalinity (7.2–11.1), ash content ranging from 56.9% to 87.3%, and significant phosphorus retention, with phosphorus concentrations increasing with pyrolysis temperature (5.35%–9.38%). Phosphorus fractionation showed a shift toward more stable fractions particularly at 500 °C. Soil incubation experiments indicated increased phosphorus availability with HCl-extractable P showing a high extraction efficiency of up to 94.95%. In plant growth experiments, the amended biochar significantly enhanced growth, with corn showing an increase of up to 28.8% and wheat showing an increase of up to 86% compared to the control in the first four weeks after emergence. These findings indicate that phosphate-amended sewage sludge biochar enhances nutrient availability and supports plant growth, providing a sustainable solution for sewage sludge management, contributing to soil improvement and carbon sequestration, thereby addressing global environmental challenges.

Characterization of Beer Produced with the Addition of Brown Macroalgae Fucus virsoides

Marine macroalgae are organisms rich in bioactive compounds such as polysaccharides, polyphenols, and various minerals. Macroalgae are increasingly being added to the human diet precisely because they contain useful compounds that can also be used in the pharmaceutical industry. Previous research describes their addition to meat products, yogurt, bread, and baby food. However, data on the addition of algae to beer have been scarce. The goal of this work was to produce beer with the addition of brown macroalgae (Fucus virsoides) from the Adriatic Sea. In addition, the basic physical–chemical parameters (color, pH, ethanol, extract, and polyphenols) were determined. The most important premise is the transfer of selenium (Se) to beer, since Se is deficient in human food chain. The transfer of different metals, namely, S (sulfur), Mg (magnesium), P (phosphorus), K (potassium), Ca (calcium), Cr (chromium), Mn (manganese), Fe (iron), Co (cobalt), Ni (nickel), Cu (copper), Zn (zinc), As (arsenic), Se (selenium), Mo (molybdenum), Cd (cadmium), Hg (mercury), and Pb (lead), from algae to beer was determined using inductively coupled plasma–mass spectrometry (ICP−MS). The results, however, were not satisfactory regarding metal transfer. In particular, Se was detected in beer, but other metals such as As, Cd, and Pb were not. Alga addition contributed to extract values, and the original extract reached 14.3 °P in wort with alga addition, as opposed to 12.8 °P in the control sample. Such high extract content, however, resulted in beer with low alcohol content, <4% v/v for both beers. This could be explained by the high levels of unfermentable extract. pH values showed statistical difference between samples, meaning that the addition of algae significantly affected the pH value of beer, reducing acidity by almost 5%.

High Capacity and Reversible Fragile Watermarking Method for Medical Image Authentication and Patient Data Hiding.

The exchange of medical images and patient data over the internet has attracted considerable attention in the past decade, driven by advancements in communication and health services. However, transferring confidential data through insecure channels, such as the internet, exposes it to potential manipulations and attacks. To ensure the authenticity of medical images while concealing patient data within them, this paper introduces a high-capacity and reversible fragile watermarking model in which an authentication watermark is initially generated from the cover image and merged with the patient's information, photo, and medical report to form the global watermark. This watermark is subsequently encrypted using the chaotic Chen system technique, enhancing the model's security and ensuring patient data confidentiality. The cover image then undergoes a Discrete Fourier Transform (DFT) and the encrypted watermark is inserted into the frequency coefficients using a new embedding technique. The experimental results demonstrate that the proposed method achieves great watermarked image quality, with a PSNR exceeding 113dB and an SSIM close to 1, while maintaining a high embedding capacity of 3 BPP (Bits Per Pixel) and offering perfect reversibility. Furthermore, the proposed model demonstrates high sensitivity to attacks, successfully detecting tampering in all 18 tested attacks, and achieves nearly perfect watermark extraction accuracy, with a Bit Error Rate (BER) of 0.0004%. This high watermark extraction accuracy is crucial in our situation where patient data need to be retrieved from the watermarked images with almost no alteration.

Effects of dynamised high dilutions and vegetal extract based on silicon on the growth and induction of resistance in tomato plants against Rhizoctonia solani

ABSTRACT The objective of this study was to study the response of tomato (Solanum lycopersicum) against Rhizoctonia solani using dynamised high dilutions and plant extract based on silicon. The treatments were Silicea terra (ST), Thuya occidentalis (TO), and Equisetum arvense (EA) at 30CH (Centesimal Hahnemannian dilution order), Equisetum arvense leaf extract (LE), and non-dynamised water as the control. Seeds of tomato cv Marmande were treated overnight. The in vitro bioassays involved assessment of R. solani mycelial growth, seed germination, and seedling development. In the greenhouse experiment, the emergence, root and aerial part development, and disease development were evaluated. Leaves were harvested to analyse concentrations of flavonoids, phenolic compounds, chlorophyll, carotenoids, and chitinase activity. In the in vitro bioassay, LE reduced mycelial growth and TO increased the seedling vigour index, dry weight, and length of seedlings. In the greenhouse experiment, TO and ST increased plant emergence. Tomato plants treated with ST improved the fresh weight and the length of the roots. The disease severity was decreased by ST, LE, and TO. The flavonoid concentration was higher in plants treated with TO and LE. Overall, the treatments of TO, EA, and ST improved the content of phenolic compounds. Moreover, endochitinase and chitobiosidase were activated by LE.

Ultrasound-assisted extraction of sumac fruit oil and analysis of its fatty acid composition.

The use of ultrasound for enhancing the extraction of sumac fruit oil was investigated to maximize the utilization of available sumac fruit resources. The optimal extraction parameters were determined using single-factor trials and Box-Behnken design optimization and were found to be a liquid-to-material ratio of 13:1mL/g, an ultrasound temperature of 47°C, and an ultrasound duration of 32min. These yielded a 20.59% extraction rate of the oil. The ultrasonic-assisted approach markedly increased the extraction rate and significantly reduced the extraction time when compared to classical Soxhlet extraction. The resulting sumac fruit oil had a brown-yellow color with peroxide, acid, and iodine concentrations of 2.43mg/g, 0.44g/100g, and 135g/100g, respectively, and relative density (d20 20), and refractive index (20°C) values of 0.911, and 1.469, respectively. The primary fatty acids in the oil were stearic, linoleic, palmitic, linolenic, and oleic acids. With a 74.14% unsaturated fatty acid content, it has a high nutritional value as well as significant development and usage potential. PRACTICAL APPLICATION: This study demonstrates a highly efficient method for extracting vegetable oils and fats. It has the advantages of simple operation, low extraction temperature, short extraction time, high extraction rate, no damage to the material structure, excellent phusicai and chemical properties of the extracted vegetable oil, low cost, and the potential application in the food industry is crucial.

Evaluation of High Vacuum Flavor Extraction Device as a Novel Technique for the Extraction of Volatile Compounds

In this study, a high vacuum flavor extraction (HVE) device was developed to address the limitations of traditional extraction methods, such as extended extraction times and artifact generation during high-temperature processes. Firstly, the repeatability and precision of the HVE method were evaluated through quantitative analysis of twelve volatile odor compounds across seven replicate extractions using gas chromatography–flame ionization detection (GC-FID). The results showed that the HVE system achieved a mean relative standard deviation (RSD) of 11.60 ± 1.79% and a recovery rate of 90.55 ± 4.56%, demonstrating its precision and reproducibility. Secondly, the performance of HVE was compared with solvent-assisted flavor evaporation (SAFE) and simultaneous distillation–extraction (SDE) for extracting flavor compounds from fried tilapia mince. The results indicated that HVE was more effective, particularly in extracting aldehydes and pyrazines, which are key contributors to the flavor profile. Finally, sensory evaluations supported these findings, showing that the odor profiles obtained through HVE were most similar to the original sample, with a similarity score of 72.55%, compared to 69.25% for SAFE and 60.29% for SDE. These findings suggest that HVE is a suitable method for the extraction and analysis of volatile compounds in complex food matrices such as fried tilapia mince.

Valorization of Pineapple Core Waste for Sequential Extraction of Phenolic Compounds and Carotenoids: Optimization Through Ultrasound-Assisted Method and Box–Behnken Design

AbstractIn this study, a pioneering cascade method involving ultrasound-assisted extraction (UAE) and Box–Behnken Design (BBD) was optimized to valorize pineapple core waste by the sequential extraction of, firstly phenolic compounds and, secondly, carotenoids. The effectiveness of the extraction was evaluated based on total polyphenol content (TPC) and antioxidant activity using 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and ferric reducing antioxidant power (FRAP) assays. Characterization of the carotenoids was performed using high-performance liquid chromatography with a diode array detector (HPLC–DAD). The initial characterization of dry pineapple core (DPC) samples revealed their nutritional composition, including protein, lipid, and carbohydrate weight percentages of 1.20 ± 0.05%, 5.3 ± 0.4%, and 88.6 ± 0.5%, respectively. The high extractives content (40.0 ± 4.5%) suggests a substantial presence of phenolic compounds, making the pineapple core a valuable source of natural antioxidants. The optimal UAE conditions for phenolic compound extraction were 70% amplitude, 5 min extraction time, and 2 cycles, yielding an antioxidant extract rich in phenolic compounds with a desirability value of 81.2%. Therefore, DPC was considered a valuable source of natural antioxidants. The extraction of β-carotene also showed promising results with optimal UAE conditions of 20% amplitude, 3 min extraction time, and 2 cycles. This research promotes the sustainable use of pineapple waste and demonstrates the potential to obtain valuable additives for the food, pharmaceutical, and cosmetic industries, encouraging a more circular and efficient use of resources in the pineapple processing industry.

EFFECTIVENESS OF ROSELLA AS AN ANTI-INFLAMMATORY

Rosella flower (Hibiscus sabdariffa L.) can be used in the health sector. Rosella petal extract contains flavonoids such as gossypetin, hibiscetin, sabdaretine, alkaloids, and saponins. Rosella has properties such as an antiseptic, diuretic, anti-inflammatory, antibacterial, antioxidant, and can increase endurance. This paper discusses the anti-inflammatory effect of the rosella plant. The purpose of this article is to describe the effectiveness of rosella plant as an anti-inflammatory. This article collects research results from journals, textbooks, and websites accessed through the National Library of Medicine and Google scholar databases as a method. The reference source inclusion criteria are published in 2012-2022 with topics that are in line with the effectiveness of rosella as an anti-inflammatory. The reference source exclusion criteria were literature published before 2012. A total of 25 references were found, 15 references were selected, and 10 references were excluded. The studies have shown that the content of rosella flower extract is able to inhibit the cyclooxygenase enzyme thereby inhibiting the synthesis of inflammatory mediators, namely leukotrienes and prostaglandins and reducing the number of neutrophils so that it can accelerate the wound healing process, however administration of high doses of rosella extract is less effective as an anti-inflammatory because the levels of flavonoids decreased activity at high extract concentrations.

Tyrosinase Inhibitory Activity of Crude Procyanidin Extract from Green Soybean Seed and the Stability of Bioactive Compounds in an Anti-Aging Skin Care Formulation

Green soybean (Glycine max L.) seed contains a high procyanidin content and high antioxidant activity. Moreover, ultrasound-assisted extraction (UAE) has proved to be advantageous in providing high extraction efficiency. Hence, this study aimed to extract procyanidins from green soybean seeds (GSSs) using UAE. This study also evaluated the inhibitory activities of tyrosinase and the cytotoxic effects of crude procyanidin extract. The extract exhibited maximum levels of bioactive components and antioxidant capacity when subjected to a temperature of 15 °C and an extraction time of 20 min. The crude procyanidin extract at a concentration of 10 mg/mL inhibited the tyrosinase enzyme by more than 60%, and the half-maximal inhibitory concentration (IC50) value obtained for the extract was 6.85 ± 0.81 mg/mL. This result was much greater than the IC50 value obtained for kojic acid (0.089 ± 0.08 mg/mL), which was used as a positive control. For the cytotoxicity assessment, the results indicated that the crude procyanidin extract showed no cytotoxicity and actually stimulated the growth of human skin fibroblast cells. More than 80% of the bioactive compounds (total phenolic content (TPC), total flavonoid content (TFC), procyanidin content (PC)) and antioxidant activities (DPPH and FRAP) of the crude extract powder were retained at 38.68 ± 0.01 mg GAE/g, 16.07 ± 0.01 mg CAE/g, 9.24 ± 0.01 mg PC/g, 359.8 ± 0.72 μM Trolox eq/g, and 1640 ± 2.86 μM Trolox eq/g, respectively, after 12 weeks of storage at 25 °C. The crude procyanidin extract powder was then included in a facial serum formulation and tested for pH value and physical evaluation. The stability of the crude procyanidin extract facial serum was shown to be greater for bioactive compounds and antioxidant activity when stored at a temperature of 4 °C than when stored at a temperature of 25 °C. These results suggest that the GSS extracts obtained via ultrasonication show promise for use in cosmeceutical formulations for whitening skincare products.

Innovative Techniques for Pharmaceutical Waste Management: Enhancing Drug Recovery and Environmental Sustainability

The pharmaceutical sector is a major component of current healthcare, manufacturing and distributing drugs, biological substances, and medical equipment. Despite its advantages, the sector creates enormous waste, including materials for packaging, production by-products, expired or unused drugs, and other residues, creating health and environmental issues. Appropriate pharmaceutical waste handling and medication recovery strategies are vital for limiting these problems. This article aims to investigate and evaluate multiple techniques for recovering pharmaceuticals from pharmaceutical waste, highlighting the significance of sustainable waste management in the pharmaceutical sector. The paper emphasizes the need to use modern methods such as liquid-liquid extraction, membrane crystallization, solid-liquid extraction, and adsorption to recover drugs from pharmaceutical waste. Liquid-liquid extraction exhibits excellent adaptability and efficiency for varied Active Pharmaceutical Ingredients (APIs), whereas membrane crystallization provides low-energy solutions for thermally sensitive compounds. Solid-liquid extraction is useful for recovering APIs from solid dosage forms, while adsorption approaches exploit substances like activated carbon for organic component recovery. Each process has particular benefits and disadvantages, with the selection of methodology based on waste properties and recovery objectives. It emphasizes the promise of these technologies for high extraction yields, purity, and environmental sustainability, supporting effective pharmaceutical waste management procedures. Additionally, difficulties such as cost-effectiveness, scalability, and regulatory compliance are addressed, pointing to opportunities for future research and development to improve the efficacy of drug recovery procedures. In conclusion, using advanced techniques to recover pharmaceuticals from pharmaceutical waste offers a viable way to implement sustainable waste recovery procedures and lessen the pharmaceutical industry's negative environmental effects.

Biosynthesis and Characterization of Iron Oxide Nanoparticles Using Chenopodium quinoa Extract.

In this study, we achieved the biosynthesis of novel 7-8 nm iron-oxide nanoparticles in the presence of different concentrations (5 to 50% w/v) of commercial white quinoa extract. Initially, quinoa extract was prepared at various concentrations by a purification route. The biosynthesis optimization was systematically monitored by X-ray diffraction, and the Rietveld quantitative analysis showed the presence of goethite (5 to 10 wt.%) and maghemite phases. The first phase disappeared upon increasing the organic loading (40 and 50% w/v). The organic loading was corroborated by thermogravimetric measurements, and it increased with quinoa extract concentration. Its use reduces the amount of precipitation agent at high quinoa extract concentrations with the formation of magnetic nanoparticles with hard ferrimagnetic character (42 and 11 emu g-1). The enrichment of hydroxyl groups and the negative zeta potential above pH = 7 were corroborated by a reduction in the point of zero charge in all the samples. For alkaline values, the zeta potential values were above the stability range, indicating highly stable chemical species. The evidence of hydroxyl and amide functionalization was qualitatively observed using infrared analysis, which showed that the carboxyl (quercetin/kaempferol), amide I, and amide III chemical groups are retained after biosynthesis. The resultant biosynthesized samples can find applications in environmental remediation due to the affinity of the chemical agents present on the particle surfaces and easy-to-handle them magnetically.

Blind image authentication using singular value decomposition with enhanced robustness by augmenting hamming code

Singular value decomposition (SVD) based image authentication has widespread applications for digital media protection including forensic and medical domains due to the high stability and robustness of singular values under small perturbations. However, most of these techniques are non-blind and have high redundancies for the extraction of secret data. The proposed scheme employs a blind extraction strategy by utilizing the intrinsic relationship of coefficient pairs of the U matrix of the host image blocks. This relationship is utilized to hide a secret binary bit after computing a threshold value in constant time. The host image underwent block-wise decomposition and hash-based randomization of blocks, followed by block-wise SVD for embedding secret bits in the U matrix. Hamming coded watermark is embedded for high precision extraction under active attacks. High imperceptibility and strong robustness are observed under attacks when tested across general purpose as well as image datasets and the system outperforms many existing works. Experimental observation shows the average PSNR between the host and marked image and average NCC between embedded and extracted watermark to be 36.98 dB and 0.999 respectively for the SIPI dataset whereas 52.7 dB and 1 respectively for the X-Ray dataset. The system exhibited high robustness under Salt-and-pepper noise (SAPN), Gaussian Noise (GAUN), Cropping (CRP), Median Filtering (MF), Histogram Equalization (HEQ), and Jpeg Compression (JPC) with average NCC values of 0.998, 1, 0.932, 0.999 and 0.967 respectively for X-Ray dataset. The time complexity O (M × N) is observed for both embedding and extraction algorithms for a host image of size M × N.

Self-Oxidated Hybrid Conductive Network Enables Efficient Electrochemical Lithium Extraction Under High-Altitude Environment.

The electrochemical deintercalation method has been considered as an effective way to address the demand for lithium resources due to its environmental friendliness, high selectivity, and high efficiency. However, the performance of electrochemical lithium extraction is closely dependent on the electrode material and needs to be compatible under plateau environments with high-altitude and low-temperature. Herein, an in situ self-oxidation method is conducted to construct a hybrid conductive network on the surface of LiFePO4 (LFP-HN). The introduction of a hybrid conductive network enhanced the interfacial electron/lithium-ion transfer. In addition, structural stability is strengthened through suppressing the intercalation of impurity cations. Consequently, the LFP-HN delivered extremely high lithium extraction capacity (27.42mg g-1), low energy consumption (4.91Wh mol-1), and superior purity (91.05%) in Baqiancuo real brine (4788 m, -10°C). What's more, LFP-HN-based large-scale prototypes are constructed and operated at Baqiancuo, which is calculated to extract 25kg Lithium Carbonate Equivalent per cycle (4.55h, 100 pairs of plates). Based on the excellent performance, the modification strategy developed in this work can be a promising solution for industrial lithium extraction under high-altitude environment.

B-156 Extraction strategy for therapeutic drug monitoring of sirolimus and tacrolimus using volumetric absorptive microsampling

Abstract Background Following organ transplantation, patients are placed on immunosuppressant drugs (ISDs) to minimize the risk of rejection. Sirolimus and tacrolimus are two of the most widely used ISDs, however, due to their narrow therapeutic indices, patients require frequent therapeutic drug monitoring (TDM). Recurrent venipuncture can become uncomfortable and disruptive, especially in the pediatric population. Therefore, we describe an extraction method using dried whole blood from volumetric absorptive microsampling (VAMS) devices for the detection of sirolimus and tacrolimus by turbulent flow liquid chromatography tandem mass spectrometry (TFC-MS/MS). The use of VAMS in the clinical laboratory will provide ISD patients with a convenient alternative to traditional blood draws. Methods MassTrak immunosuppressant calibrators based on a whole blood matrix (Waters) were applied to 30 μL VAMS Mitra devices (Neoteryx) and dried overnight. To extract the whole blood off of VAMS tip, we tested various methanol:water solvent ratios, of which 30 μL was added to the device. Tips were extracted using ultrasonication (30 min), vortexing (5 min), and centrifugation. Once extracted from the tip, 25 mM zinc sulfate was added to whole blood extract at a 1:1 (v/v) ratio. An acetonitrile and methanol extraction reagent was then added to the whole blood/zinc sulfate solution at a 2:1 (v/v) ratio. After brief vortexing, samples were centrifuged at 16,060 × g (10 min) and tested using an established TFC-MS/MS method which deploys a TLX-2 system for sample preparation coupled to a Q-Trap tandem mass spectrometer (AB Sciex 5500). Results A 80:20 (v/v) water:methanol extraction solvent yielded the greatest extraction efficacy for both sirolimus and tacrolimus from the VAMS tips compared to other tested ratios. We established a 5-point calibration curve to correlate the measured values of ISDs with known MassTrak calibration standard concentrations. The resulting average calibration curve from 3 independent experiments was highly linear for both sirolimus (R2= 0.992; slope= 1.1; intercept= 0.94) and tacrolimus (R2= 0.996; slope= 1.1; intercept = 0.8819). Our VAMS whole blood extraction strategy was correlated to the established neat whole blood protocol, which utilized all of the sample preparation steps outlined above except the initial extraction from the VAMS tip. The average extraction efficacy was 89.1% for sirolimus with an average coefficient of variation (CV%) of 12.1% across 3 independent experiments. For tacrolimus, we demonstrated an average extraction efficacy of 100.1% with an average CV% of 8.4%, again across 3 independent experiments. Conclusions We demonstrate the feasibility of using a VAMS approach to TDM of sirolimus and tacrolimus. Our results demonstrate favorable recoveries for both of the tested drugs, evidenced by high recoveries of the external calibration standards. Additionally, our method exhibited high extraction efficacy and low variability. Further validation studies, including the utilization of clinical samples is necessary to confirm our preliminary findings.

Effect of branching in the alkyl chain of diglycolamide on the sequestration of tetravalent actinides: solvent extraction and theoretical studies.

DGA (diglycolamide) ligands show a different extraction behavior of trivalent metal ions by changing the branching alkyl chain length as well as the branching at the methylene position. There are no studies of these factors on the extraction efficiency of these DGA derivatives for the extraction of tetravalent actinides. We have evaluated four different DGA derivatives for the extraction of Np, Pu, and Th from molecular diluents. The n-butyl derivative shows enhanced extraction efficiency and branching gives rise to a reduction in the extraction efficiency of tetravalent ions. The distribution ratios are higher in pure octanol than in a mixture of 30% octanol and 70% n-dodecane. This behavior is in marked difference to that of the extraction of trivalent ions where the addition of an alcohol generally decreases the distribution ratio of trivalent ions due to the ligand-modifier intercation, poor aggregation or micelle formation tendency of DGAs in polar solvents. This suggests that micelle-mediated extraction may not be the dominating factor for the extraction of tetravalent metal ions. Slope analysis suggests the involvement of only two DGA molecules in the extracted species suggesting no/poor possibility of micelle formation in the present system. The higher extraction in pure octanol may be due to a better solubility of the extracted complexes in this polar medium compared to the mixture of octanol and n-dodecane. The water and acid uptake, the back extraction, and the radiation stability of the solvent systems were also investigated. DFT studies were performed to get a better insight into the extraction and complexation of the different DGA solvent systems.

State ownership and financial reporting quality: Evidence from natural advantage industries

Using a hand-collected sample of state-owned enterprises and newly privatized firms around the globe, we examine financial reporting quality in natural advantage (substantial oil reserves or mineral deposits) industries. We find that ultimate state ownership tends to deteriorate financial reporting quality. Such a finding tends to occur particularly in countries with low shareholder minority protection, low financial development, high resource extraction intensity, low freedom of the press, collectivist societies, poor government anti-diversion policies, and in resource-dependent countries. Finally, we document that ultimate state ownership in the context of better financial reporting quality is associated with exacerbated capital expenditures, which indicate resource overextraction. Such a finding applies particularly to resource-dependent countries and civil-law countries.

Survivability of low pathogenic avian influenza virus in aqueous poultry manure fertilizer

Avian influenza has been a growing problem in the United States for decades. Low pathogenic avian influenza (LPAI) virus causes low morbidity, while highly pathogenic avian influenza (HPAI) has a devastating effect on the poultry industry causing high morbidity and mortality worldwide. Manure from large and small poultry operations is spread on crop fields as a fertilizer. During an outbreak of avian influenza in a farm it is critical to adequately process the manure to kill the virus before its use in agriculture. Aqueous extraction of poultry manure at high temperature (55-65°C) is an attractive method for treatment of poultry manure, which extracts the nutrients and kills harmful microbes from the manure. The end product is a nutrient rich liquid that can be safely applied to fields or used in hydroponic operations, with nutrients that are more bioavailable to the plant compared to dry litter. However, we do not know whether aqueous high temperature extraction processes completely kill avian influenza virus present in the manure. Our aim in this study was to determine the competence of the aqueous extraction of poultry manure on avian influenza virus inactivation. We optimized the procedure using a LPAI virus isolate in a biosafety level 2 cabinet. Our data indicated that LPAI virus including the hemagglutinin protein of the virus were completely destroyed when the poultry manure was processed by aqueous extraction at temperatures ≥ 55°C for one hour. Future research will identify the conditions required for inactivating HPAI virus using this optimized procedure by performing the study in a BSL3 facility.

Antioxidant and Immunological Properties of Dracocephalum moldavica Extract in Penaeus vannamei

Objectives: The effects of different concentrations of Dracocephalum moldavica extract (DME) supplement on growth, survival, antioxidants, some biochemical parameters and innate immunity of White leg shrimp (Penaeus vannamei) juveniles investigated. Methods: For 56 days, shrimp (4.5-5 g) received diets that were enhanced with 0 (control), 50, 100, 200 mg DME/kg feed to attain apparent satiety. Results: The results revealed that feeding shrimp with DME significantly improved Feed efficiency and Feed conversion ratio with an optimum level of 200 mg/kg diet. Dietary DME supplementation had no significant effects on their carcass composition. Total albumin and protein higher (P > 0.05) in DME-fed particularly at 200 mg/kg treatment On the other hand, shrimp fed 200 mg DME/kg feed experienced significant decreases in aspartate and alanine aminotransferase levels. As dietary extract levels increased, there was a significant (P < 0.05) increase in SOD and CAT activities, as well as LYZ and PO levels, so that treatments with 100 and 200 mg DME/kg feed had the highest values, and Significant (P < 0.05) reductions in MDA and NO levels were observed at high dietary extract levels of 100 and 200 mg DME/kg. Conclusion: P. vannamei's growth, antioxidant capacity and innate immunity were boosted by diets that contained 200 mg DME/kg feed.