High Energy Resolution Fluorescence Detection Research Articles

On the origin of low-valent uranium oxidation state

The significant interest in actinide bonding has recently focused on novel compounds with exotic oxidation states. However, the difficulty in obtaining relevant high-quality experimental data, particularly for low-valent actinide compounds, prevents a deeper understanding of 5f systems. Here we show X-ray absorption near-edge structure (XANES) measurements in the high-energy resolution fluorescence detection (HERFD) mode at the uranium M4 edge for the UIII and UIV halides, namely UX3 and UX4 (X = F, Cl, Br, I). The spectral shapes of these two series exhibit clear differences, which we explain using electronic structure calculations of the 3d-4f resonant inelastic X-ray scattering (RIXS) process. To understand the changes observed, we implemented crystal field models with ab initio derived parameters and investigated the effect of reducing different contributions to the electron-electron interactions involved in the RIXS process. Our analysis shows that the electron-electron interactions weaken as the ligand changes from I to F, indicative of a decrease in ionicity both along and between the UX3 and UX4 halide series.

Electronic-Structure Interpretation: How Much Do We Understand Ce L3 XANES?

Historically, cerium has been attractive for pharmaceutical and industrial applications. The cerium atom has the unique ability to cycle between two chemical states (Ce(III) and Ce(IV)) and drastically adjust its electronic configuration: [Xe] 4f15d16s2 in response to a chemical reaction. Understanding how electrons drive chemical reactions is an important topic. The most direct way of probing the chemical and electronic structure of materials is by X-ray absorption spectroscopy (XAS) or X-ray absorption near-edge structure (XANES) in high energy resolution fluorescence detection (HERFD) mode. Such measurements at the Ce L3 edge have the advantage of a high penetration depth, enabling in-situ reaction studies in a time-resolved manner and investigation of material production or material performance under specific conditions. But how much do we understand Ce L3 XANES? This article provides an overview of the information that can be extracted from experimental Ce L3 XAS/XANES/HERFD data. A collection of XANES data recorded on various cerium systems in HERFD mode is presented here together with detailed discussions on data analysis and the current status of spectral interpretation, including electronic structure calculations.

Integrated Experimental and Theoretical Investigation of Copper Active Site Properties of a Lytic Polysaccharide Monooxygenase from Serratia marcescens.

In this paper, we employed a multidisciplinary approach, combining experimental techniques and density functional theory (DFT) calculations to elucidate key features of the copper coordination environment of the bacterial lytic polysaccharide monooxygenase (LPMO) from Serratia marcescens (SmAA10). The structure of the holo-enzyme was successfully obtained by X-ray crystallography. We then determined the copper(II) binding affinity using competing ligands and observed that the affinity of the histidine brace ligands for copper is significantly higher than previously described. UV-vis, advanced electron paramagnetic resonance (EPR), and X-ray absorption spectroscopy (XAS) techniques, including high-energy resolution fluorescence detected (HERFD) XAS, were further used to gain insight into the copper environment in both the Cu(II) and Cu(I) redox states. The experimental data were successfully rationalized by DFT models, offering valuable information on the electronic structure and coordination geometry of the copper center. Finally, the Cu(II)/Cu(I) redox potential was determined using two different methods at ca. 350 mV vs NHE and rationalized by DFT calculations. This integrated approach not only advances our knowledge of the active site properties of SmAA10 but also establishes a robust framework for future studies of similar enzymatic systems.

Probing the Long- and Short-Range Structural Chemistry in the C-Type Bixbyite Oxides Th0.40Nd0.48Ce0.12O1.76, Th0.47Nd0.43Ce0.10O1.785, and Th0.45Nd0.37Ce0.18O1.815 via Synchrotron X-ray Diffraction and Absorption Spectroscopy.

The long- and short-range structural chemistry of the C-type bixbyite compounds Th0.40Nd0.48Ce0.12O1.76, Th0.47Nd0.43Ce0.10O1.785, and Th0.45Nd0.37Ce0.18O1.815 is systematically examined using synchrotron X-ray powder diffraction (S-PXRD), high-energy resolution fluorescence detection X-ray absorption near edge (HERFD-XANES), and extended X-ray absorption fine structure spectroscopy (EXAFS) measurements supported by electronic structure calculations. S-PXRD measurements revealed that the title compounds all form classical C-type bixbyite structures in space group Ia3̅ that have disordered cationic crystallographic sites with further observation of characteristic superlattice reflections corresponding to oxygen vacancies. Despite the occurrence of oxygen vacancies, HERFD-XANES measurements on the Ce L3-edge revealed that Ce incorporates as Ce4+ into the structures but involves local distortion that resembles cluster behavior and loss of nearest-neighbors. In comparison, HERFD-XANES measurements on the Nd L3-edge supported by electronic structure calculations reveal that Nd3+ adopts a local coordination environment similar to the long-range C-type structure while providing charge balancing for the formation of oxygen defects. Th L3-edge EXAFS analysis reveals shorter average Th-O distances in the title compounds in comparison to pristine ThO2 in addition to shorter Th-O and Th-Ce distances compared to Th-Th or Ce-Ce in the corresponding F-type binary oxides (ThO2 and CeO2). These distances are further found to decrease with the increased Nd content of the structures despite simultaneous observation of the overall lattice structure progressively expanding. Linear combination calculations of the M-O bond lengths are used to help explain these observations, where the role of oxygen defects, via Nd3+ incorporation, induces local bond contraction and enhanced Th cation valence, leading to the observed increased lattice expansion with progressive Nd3+ incorporation. Overall, the investigation points to the significance of dissimilar cations exhibiting variable short-range chemical behavior and how it can affect the long-range structural chemistry of complex oxides.

Neutron Reflectivity for Testing Graphene Oxide Films Sorption of EuCl3 in Ethanol Solution

Neutron reflectivity (NR) was used to study the sorption of Eu(III) by graphene oxide (GO) films exposed to ethanol solution of EuCl3. Most of the earlier sorption studies have been performed using GO dispersed in solution. In contrast, layered structure of GO films imposes limitations for penetration of ions between individual sheets. The analysis of NR data recorded before and after sorption under vacuum demonstrates an increase of GO film thickness due to sorption by 35–40%. The characterization of chemical state of Eu(III) sorbed by GO films by X‐ray absorption near‐edge structure (XANES) in high‐energy resolution fluorescence detection (HERFD) method at the Eu L3 edge reveals that it remains the same as in anhydrous EuCl3. Analysis of all collected data including reference experiments with bulk GO samples allows to conclude that EuCl3 penetrates into GO interlayers with ethanol solution and remains trapped in interlayers after evaporation of ethanol. Sorption of EuCl3 results in nearly complete amorphization of film and likely formation of voids, thus making NR models based on specific volume of unit cell not valid for quantitative evaluation of Eu sorption. Limitations of NR method must be taken into account in future studies of sorption by thin films.

Insights into uranium sequestration by coal fly-ash-derived zeolites: Understanding via wet chemistry, and advanced spectroscopies

The operation of nuclear power plants requires a supply of nuclear fuel where uranium plays a substantial role as a primary fissile material. Its extraction from U-bearing minerals and handling may cause a leakage of heavily toxic radioactive pollution, which ends up in water bodies and soil. Therefore, tackling U-contaminated water is crucial to preserve water integrity and quality. Zeolites are known as profound ion exchangers with great affinity towards cationic species present in polluted waters. Various zeolite synthesis routes have made this group of aluminosilicates even more promising to be applied as water purification materials. Here, the synthetic gismondite, faujasite, and Linde type-A zeolites from coal fly-ash were synthesized via tailored, coupled fusion-hydrothermal method and applied to remove aqueous uranium (primarily as 238U) under varying pH, time (sorption kinetics), and initial U concentrations (sorption isotherms). The maximum U uptake was observed for Na–P1 (GIS) zeolite, which equals 48.72 mg U/g, the highest reported value on maximum U adsorption capacity for zeolitic materials. The U adsorption kinetics showed that equilibrium is reached after approximately 3 h of adsorption and that the removal process follows a Freundlich isothermal model for all zeolites, thus preferential adsorption onto heterogeneous surfaces. Advanced spectroscopic studies, including laboratory-scale X-ray Photoelectron Spectroscopy with synchrotron light X-ray Absorption Near Edge Structure in High Energy Resolution Fluorescence Detection mode, revealed that at acidic pH, predominantly an ion exchange between Na+ ions with hexavalent uranyl species takes place. In contrast, in the neutral pH region, the U is immobilized via precipitation in the form of μm-scale mineral aggregates of Na-schoepite: Na[(UO2)4O2(OH)5](H2O)5↓. The outcomes of the research study has demonstrated that synthetic zeolites, obtained from industrial by-products such as coal fly-ash, can be successfully valorized to efficient U adsorbents while unveiling the insights to understand the zeolites/U interactions at the nanoscale level.

Structural insights and electronic state analysis of PtNi nanowire catalysts by operando high-energy resolution fluorescence detection X-ray absorption spectroscopy

Operando conventional and high-energy resolution fluorescence detection X-ray absorption spectroscopy were used to study the oxidation states and Pt–Pt bond length changes in PtNi nanowire catalysts under oxygen reduction reaction conditions.

Exploring the Degradation Mechanism on PtxCoy Alloy Catalysts for Oxygen Reduction Reaction by Operando X-Ray Absorption Spectroscopy

At present, alloying the Pt with 3d-transition metal, such as Co, has been demonstrated as an efficacious approach in enhancing the activity of the cathodic catalysts and diminishing the cost of Pt through ligand effect and strain effect. However, these catalysts were facing with a substantial challenge of the limited durability, primarily attributed to the leaching of the 3d-transition metal under the rigorous electrochemical conditions for the proton exchange membrane fuel cells (PEMFCs)[1]. Herein, we applied both operando conventional XAS and high energy resolution fluorescence detection (HERFD) XAS to identify the electro-chemical behaviors of subsize (about 2.5 nm) PtxCoy alloy catalysts with different Co content and associated with the Pt1Co3@Pt core-shell (CS) nanostructure catalysts obtained by simple displacement reaction. We find that the introduction of Co helps to modify the structure of PtCo alloy catalysts and benefit the activity, however, the increase content of Co brings to the heavier oxidation of Pt, which accelerate the degradation of the PtCo alloy catalysts. While the structure with Pt-rich shell suggested a high tolerance to the Pt oxidation which benefits both stability and activity. Based on these findings, we demonstrate the significance of designing PtCo CS nanostructure with high Co content to achieve optimal performance in PEMFCs. Our research provides valuable insights in designing the catalysts combined with operando XAS analysis and paves the way for the development for the large-scale application for PEMFCs. For the typical synthesis of PtCox alloy catalysts, the Pt(acac)2 and Co(acac)3 were used as Pt and Co precursors. 4mL ethanol was added to the pre-mixed Pt and Co precursors and heated up to 60 °C with magnetic stirring. After the precursors completely dissolved, certain amount of Vulcan 72 was added into the solution. Then repeat ultrasonication and magnetic stirring in 60 °C until the solution converted into slurry statement, dried the product in 30 °C over night. Next, the above well-milled products were treated at 700 °C for 2h in Ar atmosphere to transfer into alloy particles. According to the introduced ratio between Pt and Co, the catalysts were noted as Pt3Co1, Pt1Co1, and Pt1Co3. The contribution of CS nanostructure of Pt1Co3 was applied by simple displacement reaction using H2PtCl6 solution as Pt source. The production was annealed in H2 for 30 min. Operando conventional XAS (at BL36XU in Spring 8) was performed to investigate the electronic statement and structure changes during the operation. Operando HERFD XAS (at BL39XU in Spring 8) further identified the formation of metal Pt with chemisorbed O and Pt oxidation during the polarization varying different Co content and Pt-rich shell. The electronic performance of PtCo alloy catalysts was evaluated in rotating disk electrode, gas diffusion electrode, and membrane electrode assembly, which exhibited a higher performance (about 5 times higher than Pt/C) for Pt1Co3@Pt catalyst. Fig. 1a shows the STEM mapping results for Pt1Co3@Pt catalysts, the linear scanning profile is shown in the mix-image, and the signal intensity between the Pt L-edge and Co K-edge indicates the Pt-rich shell and Pt and Co core structure, which suggested the successful synthesis of Pt-rich shell with high Co content. To further analyze the electronic-behavior for the catalysts, the operando HERFD-XAS analysis was performed on Pt1Co3 and Pt1Co3@Pt catalysts, which provides a higher signal-to-noise ratio and detailed information about the electronic statement of Pt atom[2]. As shown in Figure 1b and c, the main Pt L3-edge white line intensity continuously increased and positively shifted, which suggested the increasing coverage of chemisorbed O or OH onto the Pt surface and the generation of oxidic component at high polarization potential for Pt1Co3 catalyst. While less changes were shown in Pt1Co3@Pt catalyst, which implied the formation of Pt-rich shell could help to suppress the oxidation of Pt in PtCo alloy catalysts and benefit the catalytic performance.

In-Situ Observation of Adsorption Species on Platinum Catalyst in Oxygen Reduction Reaction Using High Energy Resolution XAFS

The oxygen reduction reaction (ORR) on Pt surfaces, for examples, Pt single crystals, polycrystalline Pt electrodes, Pt nanoparticles (NPs), Pt-based alloys, and core–shell Pt nanostructures, has been discussed in the last few decades.In polymer electrolyte fuel cells (PEFCs), hydrogen peroxide and its radicals are known to be fatal attacking species not only for electrode catalysts but also for carbon materials and polymer membranes.A thorough understanding of ORR schemes has led to the development of seamless four-electron reduction cathodes, contributing to improved endurance reliability of both anion-exchange membrane (AEM) and proton-exchange membrane (PEM) fuel cells.In this study, the reaction pathway, and intermediate species such as molecular oxygen, in the ORR were investigated in alkaline and acidic environments, respectively.In this work, High Energy Resolution Fluorescence Detection X-ray Absorption Spectroscopy (HERFD-XAS) at the Pt L III-edge, which enhances resolution by partially collecting fluorescent X-ray was employed.X-ray absorption fine structure (XAFS) can detect the electronic structure of Pt, and its high energy resolution makes it possible to distinguish between different adsorption species on the surface of Pt nanoparticles.In addition, photon-in photon-out experiments using hard X-ray with high penetrating ability make it relatively easy to perform in-situ/operando measurements in potential controlled solutions.Carbon-supported Pt nanoparticles as powder catalysts were used for measurement as more realistic conditions, and the species adsorbed on the Pt nanoparticles were analyzed while controlling under the potentials both in acidic and basic electrolyte solutions with N2 or O2 gas bubbling.In N2-saturated solutions, the XANES spectra of the Pt LIII-edge reflected the presence of the adsorption species such as Pt-O (*O), Pt-OH (*OH), Pt-H (*H), as well as PtO2 oxide and Pt metallic states without any adsorption, during the ORR with the potential change.In O2-saturated solutions, one additional adsorption species of molecular oxygen was observed in both acidic and basic electrolyte solutions. It was analyzed that the intermediate species adsorbed to platinum in a side-on configuration as a superoxide anion in an alkaline environment.This intermediate species is identified as hydrogen superoxide, also known as hydroperoxyl radical, with the chemical formula HO2 by being protonated in an acidic environment.The results of research on adsorption species using HERFD-XAS have provided important knowledge for designing catalysts that enable seamless four-electron reduction.The preferred cathode catalyst design will be discussed in detail in an oral presentation at the 244th ECS Meeting. Acknowledgments: The synchrotron radiation experiments were performed at the BL11XU in the SPring-8 with the approval of the Japan Synchrotron Radiation Research Institute (JASRI) (Proposal Numbers of 2012B3506, 2013A3506, 2014A3506, 2014B3506, 2015B3506, 2016A3556 2019A3508, 2019B3508, 2020A3508, 2021A3508, 2021B3508, 2022A3508 and 2022B3597 at BL11XU). This work was supported by JSPS KAKENHI Grant Number JP22H02188). Figure 1

Effect of carbon content on electronic structure of uranium carbides

The electronic structure of UC_x (x = 0.9, 1.0, 1.1, 2.0) was studied by means of x-ray absorption spectroscopy (XAS) at the C K edge and measurements in the high energy resolution fluorescence detection (HERFD) mode at the U M_4 and L_3 edges. The full-relativistic density functional theory calculations taking into account the 5f-5f Coulomb interaction U and spin-orbit coupling (DFT+U+SOC) were also performed for UC and UC_2. While the U L_3 HERFD-XAS spectra of the studied samples reveal little difference, the U M_4 HERFD-XAS spectra show certain sensitivity to the varying carbon content in uranium carbides. The observed gradual changes in the U M_4 HERFD spectra suggest an increase in the C 2p-U 5f charge transfer, which is supported by the orbital population analysis in the DFT+U+SOC calculations, indicating an increase in the U 5f occupancy in UC_2 as compared to that in UC. On the other hand, the density of states at the Fermi level were found to be significantly lower in UC_2, thus affecting the thermodynamic properties. Both the x-ray spectroscopic data (in particular, the C K XAS measurements) and results of the DFT+U+SOC calculations indicate the importance of taking into account U and SOC for the description of the electronic structure of actinide carbides.

Nature of S-States in the Oxygen-Evolving Complex Resolved by High-Energy Resolution Fluorescence Detected X-ray Absorption Spectroscopy.

Photosystem II, the water splitting enzyme of photosynthesis, utilizes the energy of sunlight to drive the four-electron oxidation of water to dioxygen at the oxygen-evolving complex (OEC). The OEC harbors a Mn4CaO5 cluster that cycles through five oxidation states Si (i = 0-4). The S3 state is the last metastable state before the O2 evolution. Its electronic structure and nature of the S2 → S3 transition are key topics of persisting controversy. Most spectroscopic studies suggest that the S3 state consists of four Mn(IV) ions, compared to the Mn(III)Mn(IV)3 of the S2 state. However, recent crystallographic data have received conflicting interpretations, suggesting either metal- or ligand-based oxidation, the latter leading to an oxyl radical or a peroxo moiety in the S3 state. Herein, we utilize high-energy resolution fluorescence detected (HERFD) X-ray absorption spectroscopy to obtain a highly resolved description of the Mn K pre-edge region for all S-states, paying special attention to use chemically unperturbed S3 state samples. In combination with quantum chemical calculations, we achieve assignment of specific spectroscopic features to geometric and electronic structures for all S-states. These data are used to confidently discriminate between the various suggestions concerning the electronic structure and the nature of oxidation events in all observable catalytic intermediates of the OEC. Our results do not support the presence of either peroxo or oxyl in the active configuration of the S3 state. This establishes Mn-centered storage of oxidative equivalents in all observable catalytic transitions and constrains the onset of the O-O bond formation until after the final light-driven oxidation event.

Investigating Degradation Mechanisms in PtCo Alloy Catalysts: The Role of Co Content and a Pt-Rich Shell Using Operando High-Energy Resolution Fluorescence Detection X-ray Absorption Spectroscopy.

Low Pt-based alloy catalysts are regarded as an efficient strategy in achieving high activity for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs). However, the desired durability for the low Pt-based catalysts, such as the Pt1Co3 catalyst, has still been considered a great challenge for PEMFCs. In this study, we investigate sub-2.5 nm PtxCoy alloy catalysts with varying Co content and Pt1Co3@Pt core-shell (CS) nanostructure catalysts obtained through a simple displacement reaction. The Pt1Co3@Pt_H catalysts showed a high mass activity (MA) of 1.46 A/mgPt at 0.9 V and 14% MA loss after 10k accelerated degradation test (ADT) cycles, which suggested the improved stability compared with Pt1Co3 catalysts (52% MA loss). To clarify the degradation mechanism, operando high-energy resolution fluorescence detection X-ray absorption spectroscopy (XAS) was applied in addition to conventional advanced measurement techniques, including operando conventional XAS, to analyze the electronic state and structure changes during operation potentials. We found that introducing Co improves the catalysts' activity mainly from the strain effect, but an excessive amount of Co leads to increased Pt-oxidation, which accelerates the degradation of the catalysts. The Pt1Co3@Pt_H catalyst shows high tolerance to Pt-oxidation, benefiting both the stability and activity. Our findings demonstrate an in-depth understanding of the degradation mechanism and the importance of designing PtCo CS nanostructures with optimal Co content for enhanced performance in PEMFCs.

Redox-induced structural changes in Keggin-type tungstophosphate investigated by high-energy-resolution fluorescence detection X-ray absorption spectroscopy

Redox-active heteropolyanions are widely applied to redox catalysts and electron acceptors and the understanding of their reduced states in solution is essential. In this study, the structural changes of Keggin-type tungstophosphate: [PW12O40]3− induced by electrochemical reduction were investigated using W L3-edge X-ray absorption near-edge structure (XANES) spectra in high-energy-resolution fluorescence detection (HERFD) mode. W L3-edge HERFD-XANES spectra revealed the changes in the electronic state of W species and local structure of {WO6} units, which were negligible in conventional transmittance mode; the peak intensities of the split two white line peaks were switched by the electrochemical reduction accompanied by enlargement of the splitting width. Our findings suggest that the injected electron was delocalized on whole {WO6} units in [PW12O40]3− and that the improved symmetry of {WO6} units compensated for the change in valence due to the injected electron.

Mapping the Initial Stages of a Protective Pathway that Enhances Catalytic Turnover by a Lytic Polysaccharide Monooxygenase.

Oxygenase and peroxygenase enzymes generate intermediates at their active sites which bring about the controlled functionalization of inert C-H bonds in substrates, such as in the enzymatic conversion of methane to methanol. To be viable catalysts, however, these enzymes must also prevent oxidative damage to essential active site residues, which can occur during both coupled and uncoupled turnover. Herein, we use a combination of stopped-flow spectroscopy, targeted mutagenesis, TD-DFT calculations, high-energy resolution fluorescence detection X-ray absorption spectroscopy, and electron paramagnetic resonance spectroscopy to study two transient intermediates that together form a protective pathway built into the active sites of copper-dependent lytic polysaccharide monooxygenases (LPMOs). First, a transient high-valent species is generated at the copper histidine brace active site following treatment of the LPMO with either hydrogen peroxide or peroxyacids in the absence of substrate. This intermediate, which we propose to be a CuII-(histidyl radical), then reacts with a nearby tyrosine residue in an intersystem-crossing reaction to give a ferromagnetically coupled (S = 1) CuII-tyrosyl radical pair, thereby restoring the histidine brace active site to its resting state and allowing it to re-enter the catalytic cycle through reduction. This process gives the enzyme the capacity to minimize damage to the active site histidine residues "on the fly" to increase the total turnover number prior to enzyme deactivation, highlighting how oxidative enzymes are evolved to protect themselves from deleterious side reactions during uncoupled turnover.

Unraveling Metal-Ligand Bonding in an HNO-Evolving {FeNO}6 Complex with a Combined X-ray Spectroscopic Approach.

Photolytic delivery of nitric oxide and nitroxide has substantial biomedical and phototherapeutic applications. Here, we utilized hard X-ray spectroscopic methods to identify key geometric and electronic structural features of two photolabile {FeNO}6 complexes where the compounds differ in the presence of a pendant thiol in [Fe(NO)(TMSPS2)(TMSPS2H)] and thioether in [Fe(NO)(TMSPS2)(TMSPS2CH3)] with the former complex being the only transition metal system to photolytically generate HNO. Fe Kβ XES identifies the photoreactant systems as essentially Fe(II)-NO+, while valence-to-core XES extracts a NO oxidation state of +0.5. Finally, the pre-edge of the Fe high-energy-resolution fluorescence detected (HERFD) XAS spectra is shown to be acutely sensitive to perturbation of the Fe-NO covalency enhanced by the 3d-4p orbital mixing dipole intensity contribution. Collectively, this X-ray spectroscopic approach enables future time-resolved insights in these systems and extensions to other challenging redox noninnocent {FeNO}x systems.

Measurement and modelling of resonant inelastic X-ray scattering and many-body processes using extended-range high energy resolution fluorescence detection and multiconfigurational Dirac–Fock calculations

Measurement and modelling of resonant inelastic X-ray scattering and many-body processes using extended-range high energy resolution fluorescence detection and multiconfigurational Dirac–Fock calculations

Deconvoluting Cr states in Cr-doped UO2 nuclear fuels via bulk and single crystal spectroscopic studies

Cr-doped UO2 is a leading accident tolerant nuclear fuel where the complexity of Cr chemical states in the bulk material has prevented acquisition of an unequivocal understanding of the redox chemistry and mechanism for incorporation of Cr in the UO2 matrix. To resolve this, we have used electron paramagnetic resonance, high energy resolution fluorescence detection X-ray absorption near energy structure and extended X-ray absorption fine structure spectroscopic measurements to examine Cr-doped UO2 single crystal grains and bulk material. Ambient condition measurements of the single crystal grains, which have been mechanically extracted from bulk material, indicated Cr is incorporated substitutionally for U+4 in the fluorite lattice as Cr+3 with formation of additional oxygen vacancies. Bulk material measurements reveal the complexity of Cr states, where metallic Cr (Cr0) and oxide related Cr+2 and Cr+32O3 were identified and attributed to grain boundary species and precipitates, with concurrent (Cr+3xU+41-x)O2-0.5x lattice matrix incorporation. The deconvolution of chemical states via crystal vs. powder measurements enables the understanding of discrepancies in literature whilst providing valuable direction for safe continued use of Cr-doped UO2 fuels for nuclear energy generation.

From Molecular Oxo-Hydroxo Ce Clusters to Crystalline CeO2

Many studies report the synthesis and characterizations of CeO2 nanoparticles (NPs) due to their applications in catalysis, energy storage, or biomedical fields. In this study, we report a comprehensive interpretation of X-ray measurements on a series of oxo-hydroxo polynuclear Ce complexes whose atomic structures are resolved. The set of investigated samples represent the formation of CeO2 small nanoparticles from a few Ce ions. Such clusters might serve as good building blocks in nanoscale architectures, and many clusters together may perform as highly active small particles. Therefore, the set of Ce clusters with growing size (from 0.6 to 1.2 nm) and nuclearity (from 6 to 38 Ce atoms) were synthesized and characterized by single-crystal X-ray diffraction (XRD), high-energy X-ray scattering (HEXS), and high-energy-resolution fluorescence detection (HERFD) X-ray absorption spectroscopy (XAS) methods and compared to larger CeO2 NPs and bulk CeO2. Methods reveal consistent trends as the size of the system grows from molecular Ce-{n} 2, 6, 24, 38, and 40 clusters to bulk CeO2. HEXS reveals a broadening in distribution for the short Ce–O bonds for the small clusters. Concomitantly, the HERFD-XAS performed at the Ce LIII edge indicates a gradual splitting of the Ce 5d states as the core of the complexes becomes more CeO2-like. The experimental observations have been supported by electronic structure calculations, based on the crystallographic determination of the cluster structures. Theoretical simulations allow us to isolate the structural and electronic properties of individual Ce sites within clusters and mark the great difference between surface and core Ce atoms. It also shows how a combination of simulations from different sites results in the accurate reproduction of the corresponding experimental data. This approach based on the experimentally determined atomic coordinates of clusters was then successfully extended to model Ce LIII edge HERFD-XAS spectra for larger CeO2 NPs. By linking the atomic and electronic structures of Ce polynuclear complexes, CeO2 nanoparticles, and bulk CeO2, this work extends the fundamental knowledge of Ce oxide nanomaterials and supports a better understanding and predictability of their electronic structure.

Extraction of branching ratios from HERFD data

A quantitative analysis method has been developed that allows the cross calibration of separate Uranium M4 and M5 X-ray absorption spectra (XAS), in particular those collected with the new High Energy Resolution Fluorescence Detection (HERFD) method. With this method, it is now possible to generate experimental Branching Ratio (BR) values from the U M4,5 XAS HERFD data.

Flow cell for operando X-ray photon-in-photon-out studies on photo-electrochemical thin film devices.

Background: Photo-electro-chemical (PEC) water splitting represents a promising technology towards an artificial photosynthetic device but many fundamental electronic processes, which govern long-term stability and energetics, are not yet fully understood. X-ray absorption spectroscopy (XAS), and particularly its high energy resolution fluorescence-detected (HERFD) mode, emerges as a powerful tool to study photo-excited charge carrier behavior under operating conditions. The established thin film device architecture of PEC cells provides a well-defined measurement geometry, but it puts many constraints on conducting operando XAS experiments. It remains a challenge to establish a standardized thin film exchange procedure and concurrently record high-quality photoelectrochemical and X‑ray absorption spectroscopy data that is unperturbed by bubble formation. Here we address and overcome these instrumental limitations for photoelectrochemical operando HERFD-XAS. Methods: We constructed a novel operando photo-electro-chemical cell by computer numerical control milling, guided by the materials' X‑ray and visible light absorption properties to optimize signal detection. To test the cell's functionality, semiconducting thin film photoelectrodes have been fabricated via solution deposition and their photoelectrochemical responses under simulated solar light were studied using a commercial potentiostat in a three-electrode configuration during HERFD-XAS experiments at a synchrotron. Results: We demonstrate the cell's capabilities to measure and control potentiostatically and in open‑circuit, to detect X‑ray signals unperturbed by bubbles and to fluently exchange different thin film samples by collecting high-resolution Fe K-edge spectra of hematite ( α -Fe 2O 3) and ferrite thin film ( MFe 2O 4, M= Zn, Ni) photoelectrodes during water oxidation. Conclusions: Our cell establishes a measurement routine that will provide experimental access of photo-electro-chemical operando HERFD-XAS experiments to a broader scientific community, particularly due to the ease of sample exchange. We believe to enable a broad range of experiments which acquired fundamental insights will spur further photoelectrochemical research and commercialization of water splitting technologies.