High-definition 3D Exoscope Research Articles

3D 4K Exo-Endoscopic Temporal Bone Dissection: A Novel Approach for Sharing the Anatomy.

Temporal bone dissection is overwide recognized as an ideal training method for otologic surgeons. The knowledge of temporal bone anatomy and especially of the course of infratemporal facial nerve is pivotal in practice. The 3D exoscope is an innovative and promising tool, that was recently introduced in ear surgery. A high-definition 3D exoscope (3D VITOM®) mounted on the VERSACRANETM holding system (Karl Storz) was used to perform two temporal bone dissection, with the aim to study the anatomy of infratemporal facial nerve. The 3D endoscope (TIPCAM®1 S 3D ORL, Karl Storz) was used in combination to provide a close-up high-quality view and to provide a different angle of view on fine anatomical relationships. The high-definition 3D exoscope allowed to conduct the dissection with high quality visualization and to share the same surgical field with trainees. Moreover, it showed a high interchangeability with the 3D endoscope. 3D 4K Exo-endoscopic temporal bone dissection seems to have benefits in terms of educational purpose, especially concerning anatomy understanding. The superiority in teaching value of this tool should be further investigated in cohort studies.

Exoscope-assisted surgery in otology and neurotology.

This review addresses the pressing need for an updated understanding of high-definition 3D exoscope role in contemporary otologic and neurotologic practice. With technological advancements driving innovations in surgical visualization, it is crucial to evaluate the efficacy of exoscope-assisted surgery compared to traditional microscopic approaches. By synthesizing recent literature, this review offers insights into the current state of exoscopic ear and lateral skull base surgery and its implications for clinical practice and research. Recent literature has focused on several key themes. Firstly, studies have demonstrated the feasibility and safety of exoscopic approaches for various otologic and neurotologic procedures. Secondly, comparative studies have highlighted similar outcomes with exoscopic techniques compared to conventional microscopic surgery, particularly in terms of operative time and complication rates. Thirdly, the exoscope can be a valuable tool for the education and training of surgeons. The findings from recent literature underscore the growing significance of exoscope-assisted surgery in otology and lateral skull base practice. However, challenges such as high magnification image quality and learning curve must be addressed to optimize its widespread adoption. Overall, this review highlights the importance of continued research and innovation in this rapidly evolving field.

Preliminary Experience with 3-Dimensional-Exoscopic Untethering of a Type II Diastematomyelia: Technical Note and Review of the Literature

ObjectiveThe aim of this paper is to describe the use of high-definition 3D exoscope (VITOM 3D exoscope - Karl Storz GmbH, Tuttlingen, Germany) for the neurosurgical treatment of a rare pediatric disease, type II diastematomyelia with associated tethered cord. MethodsA 13-year-old girl suffering diastematomyelia type II with a tethered cord was surgically treated with the aid of a high-definition 3D exoscope, with a third operator moving and pivoting its arm. Intraoperative monitoring and mapping was arranged. The surgery required a bilateral access to address both the split cord malformation and the tethering of the filum terminale. The filum terminale was identified and cut, and the connective fibrovascular tissue separating the two medullary halves were unraveled. These steps were performed with no changes of intraoperative monitoring. Pertinent literature has been carefully addressed ResultsThe surgery was successful, and the patient was discharged home on the eleventh postoperative day without any complications. The 3-month postoperative MRI demonstrated regular surgical outcomes; no dynamic motor disturbances were reported. To our knowledge this is the first spinal congenital malformation treated with the use of a 3D exoscope. ConclusionsThe use of 3D exoscope is advancing in spinal surgery, as it provides magnification, stereopsis, lighting and definition comparable to the operating microscope; the addition of a third operator simplified the operations of moving around the arm, releasing these burdens for the surgeons. Our preliminary experience proved that the use of a 3D exoscope is feasible and safe for surgical management of a type II diastematomyelia with tethered cord.

Comparison between the high-definition 3D exoscope and the operating microscope in head and neck reconstruction

The purpose of this study was to compare the three-dimensional (3D) operating exoscope (OE) with the conventional operating microscope (OM) in head and neck reconstruction. A retrospective cohort study was performed including 50 consecutive patients with no history of previous surgery or irradiation (32 male, 18 female; mean age 59.2 ± 13.3 years), who underwent free flap head and neck reconstruction using a 3D OE (n = 25; OE group) or conventional OM (n = 25; OM group). The mean total operative time was 8.0 ± 1.53 h in the OE group and 7.6 ± 1.52 h in the OM group (P = 0.86). The median (interquartile range) anastomosis time was 78.0 (63.0–91.5) minutes in the OE group and 90.0 (75.5–115.0) minutes in the OM group (P = 0.06). The final free flap survival rate was 100%. Only seven patients experienced a free flap reconstruction-related complication, and they were similarly distributed between the two groups (four in the OE group, three in the OM group; P = 0.68). Secondary outcomes (length of hospital stay, tracheostomy dependence, feeding tube dependence) were comparable in the two groups (P > 0.05). The 3D OE is a viable alternative to the conventional OM for performing standard head and neck free flap reconstructive procedures.

High-Definition 3D Exoscope-Assisted Barbed Pharyngoplasty for OSAS and Snoring: Better Than Live

Recently, a high-definition 3D exoscope (VITOM), a new magnification system that provides a 3D image of the surgical field, has been introduced. This study aims to describe the first use of VITOM 3D technology in Barbed Pharyngoplasty (BP) for Obstructive Sleep Apnea (OSA). VITOM 3D technology is used to support visualization during BP in a male patient affected by severe OSA with a circular palatal collapse pattern at drug-induced sleep endoscopy. During the surgical procedure, this approach markedly improves the visualization of the surgical field through anatomic details of the oral cavity, facilitating surgical dissection and enhancing the teaching environment. It allows for a better involvement and more interactions during the surgery, as scrubbed and assistant nurses can see the surgical field and anticipate the surgeon's choice of instrument. VITOM 3D technology, by combining a telescope with a standard endoscope, has been successfully used in various surgical disciplines and could be very useful, especially in teaching hospitals. VITOM 3D can guarantee "a real immersive" surgical experience for all participants in the operating room. Economic and efficacy studies would be conducted to support the use of a VITOM-3D exoscope in common clinical practice.

High-definition 3D exoscope-assisted tonsillectomy

Tonsillectomy is one of the most frequent surgical procedures performed by ENT surgeons. The high-definition 3D exoscope showed to be a promising tool to substitute the operating microscope in performing microsurgical procedures. However, transoral surgery might represent an innovative application of this visualization and magnification tool. In this video, a bilateral tonsillectomy was performed entirely under exoscopic visualization by an ENT resident. The high-definition 3D exoscope allowed to conduct the procedure with higher precision, with potential benefits in terms of complications and postoperative pain. Moreover, the use of the exoscope demonstrated important benefit from the educational perspective, allowing the senior surgeon to continuously monitor the resident without interruptions and position changes. The exoscopic-assisted tonsillectomy is a valuable alternative to conventional transoral procedures, and the superiority of this technique should be further investigated in cohort studies.

High-Definition 3D Exoscope in Thyroid Surgery.

The high-definition 3D exoscope is an innovative and promising tool that was recently introduced in the clinical practice. It may be used during open surgical procedures to enhance the ability to perform precise dissection of fine structures. We describe our preliminary experience with the 3D exoscope in thyroid surgery, discussing potential advantages of this system. A high-definition 3D exoscope (3D VITOM®) mounted on the VERSACRANETM holding system (Karl Storz, Tuttlingen, Germany) was used to perform open thyroid surgery. The 3D exoscope was used in three patients without significant intra-operative delay or complications. Both thyroidectomy and central compartment dissection were performed. The 3D exoscope allows to perform precise dissection in the identification and preservation of the recurrent laryngeal nerve and the parathyroid glands. 3D exoscope-assisted thyroid surgery seems to be feasible and safe. Further studies should be encouraged to analyze potential clinical benefit in the post-operative period.

Cervical Spine Microsurgery with the High-Definition 3D Exoscope: Advantages and Disadvantages

The aim of this study was to evaluate our experience with a high-definition 3-dimensional (3D) exoscope (EX) for cervical spine surgery versus a binocular operating microscope (OM). A retrospective review of patients undergoing a single-level anterior cervical discectomy and fusion (ACDF) procedure for the treatment of cervical myelopathy from March 2019 to May 2020 was performed. Demographic, perioperative, and clinical outcomes of 50 patients were included, 23 of whom received assistance from the 3D exoscope (EX group) and 27 of whom received assistance from the OM (OM group). Operative baseline and postoperative outcome parameters were evaluated. Periprocedural handling, visualization, and illumination by the EX, as well as surgeons' ergonomics, were scored using a questionnaire and rapid upper limb assessment (RULA). Baseline characteristics were similar between the 2 groups. There were no significant differences between groups in mean operative time, blood loss, duration of admission, or postoperative improvement of symptoms. Both groups showed similar clinical improvements after surgery. There were no intraoperative complications in either group. According to the attending surgeons, the intraoperative handling of instruments for the EX was rated to be comparable to that of the OM. Surgeons rated the comfort level of the intraoperative posture for the EX as very high on the subjective questionnaire and equal to the OM on the objective RULA. When compared with the OM, depth perception, image quality, and illumination for the EX were rated as inferior in ACDF procedures with long approaches. The operative education and training function of the EX was rated to be superior to that of the OM. Overall, our study showed that the EX appears to be a safe alternative for common ACDF with the unique advantage of excellent comfort and also serves a useful educational tool for the surgical team. However, our investigation revealed several important limitations of this system, including slightly inferior visualization and illumination quality compared with the OM.

Introducing the High-definition 3D exoscope in ear surgery: preliminary analysis of advantages and limits compared with operative microscope.

The aim of this study was to evaluate the potential of 3D exoscope (EX) in selected ear procedures assessing if this new technology could be an improvement in the field of ear surgery. A case series of consecutive patients surgically treated with a post-auricular approach using EX was retrospectively compared with a similar previous series treated with operating microscope (OM). Patient demographics, indications for surgery, procedure type, complications, operating room setting time (ORst), operative time, adequacy of visualization, image quality, ergonomics aspects, instrument usability, and technique as a teaching tool were investigated. Thirteen patients were included in each group. Surgical procedures in EX group were nine tympanoplasties with mastoidectomy, 1 mastoidectomy for acute complicated mastoiditis, 1 revision miringoplasty, and 2 cochlear implants. Same types of procedures were enrolled in OM group. No statistically significant difference was found between the two groups concerning ORst and operative time. In EX group, one complication occurred--a middle cranial fossa cerebrospinal fluid leak. Advantages of EX were lightness, maneuverability and compactness, less need of endoscopy during surgery, and teaching potential. Limits were a need of a large surgical corridor and the bright structures rendering in high magnification. EX resulted safe and efficient in treating diseases of the middle ear in post-auricular approaches. To date, EX advantages are not enough to abandon the OM, and it can be considered as an additional, innovative tool to be added to ear surgical equipment.

3D Exoscope-Assisted Microvascular Anastomosis: An Evaluation on Latex Vessel Models.

Background. Over the last few years, advances in technologies and digital imaging have led to the introduction of systems that enable a new approach to microsurgery and supermicrosurgery. The exoscope is a new magnification system that provides a 3D image of the surgical field: microsurgical procedures can be performed with the aid of this instrument. Here, we describe our preliminary experience with a high-definition 3D exoscope (VITOM®, Karl Storz, Tuttlingen, Germany), evaluating the characteristics of the instrument, and also its use as a magnification device for microanastomosis training. Methods. Six microsurgeons with various levels of experience were asked to perform three end-to-end anastomoses and two end-to-side anastomoses on latex vessel models, using, as a magnification system, the VITOM® 3D 4K exoscope. None of the surgeons involved had previous experience with the exoscope, with robotic surgery, with endoscopic surgery, nor with training simulators. Results. The results of the reported evaluation of the tool’s qualities, (VITOM Quality Assessment Tool) included: a good focusing of the surgical field; high image quality; strong luminance; good magnification; clear stereoscopy; and excellent freedom of movement. The exoscope proved to be user-friendly. A constant reduction in the time needed to perform the microsurgical anastomosis at each exercise was recorded. Among other advantages were the easy switching from the magnified image to the macroscopic view, superior ergonomics allowing a relaxed posture while performing the anastomosis, adequate space, and a convenient setting for the assistants to view the operating field. Conclusions. Our study showed that the exoscope VITOM 3D can be successfully used as a magnification tool for microsurgical anastomosis on synthetic vessels, and that it can also be helpful during training courses in microsurgery.

A high-definition 3D exoscope as an alternative to the operating microscope in spinal microsurgery.

Since the 1970s, the operating microscope (OM) has been a standard for visualization and illumination of the surgical field in spinal microsurgery. However, due to its limitations (e.g., size, costliness, and the limited movability of the binocular lenses, in addition to discomfort experienced by surgeons due to the posture required), there are efforts to replace the OM with exoscopic video telescopes. The authors evaluated the feasibility of a new 3D exoscope as an alternative to the OM in spine surgeries. Patients with degenerative pathologies scheduled for single-level lumbar or cervical spinal surgery with use of a high-definition 3D exoscope were enrolled in a prospective cohort study between January 2019 and September 2019. Age-, sex-, body mass index-, and procedure-matched patients surgically treated with the assistance of the OM served as the control group. Operative baseline and postoperative outcome parameters were assessed. Periprocedural handling, visualization, and illumination by the exoscope, as well as surgeons' comfort level in terms of posture, were scored using a questionnaire. A 3D exoscope was used in 40 patients undergoing lumbar posterior decompression (LPD) and 20 patients undergoing anterior cervical discectomy and fusion (ACDF); an equal number of controls in whom an OM was used were studied. Compared with controls, there were no significant differences for mean operative time (ACDF: 132 vs 116 minutes; LPD: 112 vs 113 minutes) and blood loss (ACDF: 97 vs 93 ml; LPD: 109 vs 55 ml) as well as postoperative improvement of symptoms (ACDF/Neck Disability Index: p = 0.43; LPD/Oswestry Disability Index: p = 0.76). No intraoperative complications occurred in either group. According to the attending surgeon, the intraoperative handling of instruments was rated to be comparable to that of the OM, while the comfort level of the surgeon's posture intraoperatively (especially during "undercutting" procedures) was rated as superior. In cases of ACDF procedures and long approaches, depth perception, image quality, and illumination were rated as inferior when compared with the OM. By contrast, for operating room nursing staff participating in 3D exoscope procedures, the visualization of intraoperative process flow and surgical situs was rated to be superior to the OM, especially for ACDF procedures. A 3D exoscope seems to be a safe alternative for common spinal procedures with the unique advantage of excellent comfort for the surgical team, but the drawback is the still slightly inferior visualization/illumination quality compared with the OM.

High definition three-dimensional exoscope (VITOM3D) for microsurgery training: a preliminary experience.

To assess the feasibility of a high definition 3D exoscope (VITOM®) for microsurgery training in a cohort of naïve medical students. Twenty-two consecutive medical students performed a battery of four exercises assessing basic microsurgical skills. The students were randomized in two different groups based on two different VITOM® holding systems (VERSACRANE™ and ARTip™ cruise). Participants self-reported the VITOM® system quality on a 4-point Likert scale (VITOM Quality Assessment Tool). The time needed to complete the exercises was analyzed. All students successfully completed the training, and no technical issues were raised during the simulation. The majority of the individual items were judged "good" or "very good" (n = 187; 94.4%), regardless of the two groups. "Image quality" (n = 21; 95%), "magnification rate" (n = 20; 91%), "stereoscopic effect" (n = 19; 86%), and "focusing" (n = 18; 82%) represented the best-rated items. No statistically significant difference between the two groups was measured in almost all items of the VITOM Quality Assessment Tool (p > 0.05). The time needed to perform each exercise showed a statistically significant difference between groups in two tests (p < 0.05). This study demonstrated the feasibility of a VITOM-based microsurgery training. The students' subjective assessment of the VITOM® 3D system was promising in terms of technological quality and technical feasibility. Further studies are recommended to define which VITOM® holding system could be more appropriate for microsurgery training.