High Concentrations Of Monovalent Salts Research Articles

The origin of different bending stiffness between double-stranded RNA and DNA revealed by magnetic tweezers and simulations.

The subtle differences in the chemical structures of double-stranded (ds) RNA and DNA lead to significant variations in their biological roles and medical implications, largely due to their distinct biophysical properties, such as bending stiffness. Although it is well known that A-form dsRNA is stiffer than B-form dsDNA under physiological salt conditions, the underlying cause of this difference remains unclear. In this study, we employ high-precision magnetic-tweezer experiments along with molecular dynamics simulations and reveal that the relative bending stiffness between dsRNA and dsDNA is primarily determined by the structure- and salt-concentration-dependent ion distribution around their helical structures. At near-physiological salt conditions, dsRNA shows a sparser ion distribution surrounding its phosphate groups compared to dsDNA, causing its greater stiffness. However, at very high monovalent salt concentrations, phosphate groups in both dsRNA and dsDNA become fully neutralized by excess ions, resulting in a similar intrinsic bending persistence length of approximately 39 nm. This similarity in intrinsic bending stiffness of dsRNA and dsDNA is coupled to the analogous fluctuations in their total groove widths and further coupled to the similar fluctuation of base-pair inclination, despite their distinct A-form and B-form helical structures.

Heat flows in rock cracks naturally optimize salt compositions for ribozymes.

Catalytic nucleic acids, such as ribozymes, are central to a variety of origin-of-life scenarios. Typically, they require elevated magnesium concentrations for folding and activity, but their function can be inhibited by high concentrations of monovalent salts. Here we show that geologically plausible high-sodium, low-magnesium solutions derived from leaching basalt (rock and remelted glass) inhibit ribozyme catalysis, but that this activity can be rescued by selective magnesium up-concentration by heat flow across rock fissures. In contrast to up-concentration by dehydration or freezing, this system is so far from equilibrium that it can actively alter the Mg:Na salt ratio to an extent that enables key ribozyme activities, such as self-replication and RNA extension, in otherwise challenging solution conditions. The principle demonstrated here is applicable to a broad range of salt concentrations and compositions, and, as such, highly relevant to various origin-of-life scenarios.

Flocculation of Fatty Acid Membranes does not Disrupt Encapsulation: Implications for the Origin of Cells in Evaporative Lake Environments

The first cellular compartments were likely composed of fatty acids. Saturated fatty acids are widely considered to have been available on the early Earth due to their presence on carbonaceous meteorites and potential abiotic synthesis via Fischer-Tropsch reactions, and they spontaneously self-assemble into membranes across a range of pH and temperature conditions. However, high concentrations of monovalent salts cause fatty acid membranes to flocculate. If flocculation causes the loss of membrane contents, it would have impeded early cell evolution.

Strong attractions and repulsions mediated by monovalent salts

Controlling interactions between proteins and nanoparticles in electrolyte solutions is crucial for advancing biological sciences and biotechnology. The assembly of charged nanoparticles (NPs) and proteins in aqueous solutions can be directed by modifying the salt concentration. High concentrations of monovalent salt can induce the solubilization or crystallization of NPs and proteins. By using a multiscale coarse-grained molecular dynamics approach, we show that, due to ionic correlations in the electrolyte, NPs pairs at high monovalent salt concentrations interact via remarkably strong long-range attractions or repulsions, which can be split into three regimes depending on the surface charge densities of the NPs. NPs with zero-to-low surface charge densities interact via a long-range attraction that is stronger and has a similar range to the depletion attraction induced by polymers with radius of gyrations comparable to the NP diameter. On the other hand, moderately charged NPs with smooth surfaces as well as DNA-functionalized NPs with no possibility of hybridization between them interact via a strong repulsion of range and strength larger than the repulsion predicted by models that neglect ionic correlations, including the Derjaguin-Landau-Vervey-Overbeek (DLVO) model. Interactions between strongly charged NPs (>2 e/nm2), both types smooth and DNA-functionalized NPs, show an attractive potential well at intermediate-to-high salt concentrations, which demonstrates that electrolytes can induce aggregation of strongly charged NPs. Our work provides an improved understanding of the role of ionic correlations in NP assembly and design rules to utilize the salting-out process to crystallize NPs.

Conformational Transitions of Flexible Hydrophobic Polyelectrolytes in Solutions of Monovalent and Multivalent Salts and Their Mixtures

Conformations of cationic polyelectrolytes (PEs), a weak poly(2-vinylpyridine) (P2VP) and a strong poly(N-methyl-2-vinylpyridinium iodide) (qP2VP), adsorbed on mica from saline solutions in the presence of counterions of different valences are studied using in situ atomic force microscopy (AFM). Quantitative characteristics of chain conformations are analyzed using AFM images of the adsorbed molecules. The results of the statistical analysis of the chain contour reveal collapse of the PE coils when ionic strength is in a range from tens to hundreds of millimoles per kilogram and re-expansion of the coils with a further increase of ionic strength up to a region of the saturated saline solutions. The competition between monovalent and multivalent counterions simultaneously present in solutions strongly affects conformations of PE chains even at a very small fraction of multivalent counterions. Shrinkage of PE coils is steeper for multivalent counterions than for monovalent counterions. However, the re-expansion is only incremental in the presence of multivalent counterions. Extended adsorbed coils at low salt concentrations and at very high concentrations of monovalent salt exhibit conformation corresponding to a 2D coil with 0.95 fraction of bound segments (segments in "trains") in the regime of diluted surface concentration of the PE. Shrunken coils in the intermediate range of ionic strength resemble 3D-globules with 0.8 fraction of trains. The incrementally re-expanded PE coils at a high ionic strength remain unchanged at higher multivalent salt concentrations up to the solubility limit of the salt. The formation of a strong PE complex with multivalent counterions at high ionic strength is not well understood yet. A speculative explanation of the observed experimental result is based on possible stabilization of the complex due to hydrophobic interactions of the backbone.

Stabilization of nanoparticles under biological assembly conditions using peptoids

Sequence-specific polymers are proving to be a powerful approach to assembly and manipulation of matter on the nanometer scale. This has been most impressive in the case of DNA, and progress has been made toward templating inorganic nanoparticles using DNA nanostructures. One obstacle to this progress is that inorganic nanomaterials are often incompatible with DNA assembly conditions, which involve aqueous solutions high in either or both monovalent and divalent salt. Synthetic oligopeptide ligands have been shown by others to improve nanoparticle stability in high concentrations of monovalent salt. Ligands that are peptoids, or sequence-specific N-functional glycine oligomers, allow precise and flexible control over the arrangement of binding groups, steric spacers, charge, and other functionality. We have synthesized short peptoids that can prevent the aggregation of gold nanoparticles in high-salt environments including divalent salt, and allow coadsorption of a single DNA molecule. This degree of precision and versatility is likely to prove essential in bottom-up assembly of nanostructures and in biomedical applications of nanomaterials.

Characterization Of Phosphoinositide Monolayers By Infrared Spectroscopy And Epifluorescence Microscopy At The Air/water Interface

Phosphoinositides have been shown to mediate a large variety of important physiological processes by affecting the activity and the localization of membrane associated proteins. Phosphoinositide properties are largely determined by the characteristics of their headgroup, which at physiological pH is highly charged but is also capable of hydrogen bond formation. For phosphoinositide mediated signaling events to occur, it requires the local enrichment of phosphoinositides, which depend on the interchange between attractive and repulsive forces. Factors expected to affect mutual phosphoinositide interaction are pH, cations, or positively charged proteins. We have characterized the structural properties of dipalmitoyl phosphatidylinositol mono-, bis- and trisphosphate monolayer films at the air/water interface by infrared reflection-absorption spectroscopy (IRRAS) as well as by direct visualization of domain formation of each phosphoinositide derivative by epifluorescence microscopy in the presence of low and high monovalent salt concentrations. It has been observed that on pure water subphases the surface pressure/area (Π/A) isotherms for all phosphoinositide derivatives were characteristic for a condensed monolayer whereas a monolayer expansion was found for medium (10 mM) and high salt concentrations (150 mM). IRRAS measurements showed that this was associated with a larger molecular tilt angle and a reduced acyl chain order. Using epifluorescence microscopy, domain formation has been observed for each phosphoinositide derivative as the monolayer goes from a liquid phase to the liquid condensed phase. In addition, membrane organization can be affected by the binding and interaction of various proteins or peptides to the lipids. Surface pressure/time experiments along with epifluorescence microscopy will investigate these interactions for each phosphoinositide monolayer highlighting the distinct properties of phosphoinositide/protein interactions.

Structural inference of native and partially folded RNA by high-throughput contact mapping

The biological behaviors of ribozymes, riboswitches, and numerous other functional RNA molecules are critically dependent on their tertiary folding and their ability to sample multiple functional states. The conformational heterogeneity and partially folded nature of most of these states has rendered their characterization by high-resolution structural approaches difficult or even intractable. Here we introduce a method to rapidly infer the tertiary helical arrangements of large RNA molecules in their native and non-native solution states. Multiplexed hydroxyl radical (.OH) cleavage analysis (MOHCA) enables the high-throughput detection of numerous pairs of contacting residues via random incorporation of radical cleavage agents followed by two-dimensional gel electrophoresis. We validated this technology by recapitulating the unfolded and native states of a well studied model RNA, the P4-P6 domain of the Tetrahymena ribozyme, at subhelical resolution. We then applied MOHCA to a recently discovered third state of the P4-P6 RNA that is stabilized by high concentrations of monovalent salt and whose partial order precludes conventional techniques for structure determination. The three-dimensional portrait of a compact, non-native RNA state reveals a well ordered subset of native tertiary contacts, in contrast to the dynamic but otherwise similar molten globule states of proteins. With its applicability to nearly any solution state, we expect MOHCA to be a powerful tool for illuminating the many functional structures of large RNA molecules and RNA/protein complexes.

Polymerization properties of the Thermotoga maritima actin MreB: roles of temperature, nucleotides, and ions.

MreB is a bacterial orthologue of actin that affects cell shape, polarity, and chromosome segregation. Although a significant body of work has explored its cellular functions, we know very little about the biochemical behavior of MreB. We have cloned, overexpressed in Escherichia coli, and purified untagged MreB1 from Thermotoga maritima. We have characterized the conditions that regulate its monomer-to-polymer assembly reaction, the critical concentrations of that reaction, the manner in which MreB uses nucleotides, its stability, and the structure of the assembled polymer. MreB requires a bound purine nucleotide for polymerization and rapidly hydrolyzes it following assembly. MreB assembly contains two distinct components, one that does not require divalent cations and one that does, which may comprise the nucleation and elongation phases of assembly, respectively. MreB assembly is strongly favored by increasing temperature or protein concentration but inhibited differentially by high concentrations of monovalent salts. The polymerization rate increases and the bulk critical concentration decreases with increasing temperature, but in contrast to previous reports, MreB is capable of polymerizing across a broad range of temperatures. MreB polymers are shorter and stiffer and scatter more light than eukaryotic actin filaments. Due to rapid ATP hydrolysis and phosphate release, we suggest that most assembled MreB in cells is in the ADP-bound state. Because of only moderate differences between the ATP and ADP critical concentrations, treadmilling may occur, but we do not predict dynamic instability in cells. Because of the relatively low cellular concentration of MreB and the observed structural properties of the polymer, a single MreB assembly may exist in cells.

Atomic Force Microscopy Imaging of DNA under Macromolecular Crowding Conditions

Studying the influence of macromolecular crowding at high ionic strengths on assemblies of biomolecules is of particular interest because these are standard intracellular conditions. However, up to now, no techniques offer the possibility of studying the effect of molecular crowding at the single molecule scale and at high resolution. We present a method to observe double-strand DNA under macromolecular crowding conditions on a flat mica surface by atomic force microscope. By using high concentrations of monovalent salt ([NaCl] > 100 mM), we promote DNA adsorption onto NiCl 2 pretreated muscovite mica. It therefore allows analysis of DNA conformational changes and DNA compaction induced by polyethylene glycol (PEG), a neutral crowding agent, at physiological concentrations of monovalent salt.

Evidence for a cytochrome bcc–aa 3 interaction in the respiratory chain of Mycobacterium smegmatis

Spectroscopic analysis of membranes isolated from Mycobacterium smegmatis, along with analysis of its genome, indicates that the cytochrome c branch of its respiratory pathway consists of a modified bc1 complex that contains two cytochromes c in its c1 subunit, similar to other acid-fast bacteria, and an aa3-type cytochrome c oxidase. A functional association of the cytochrome bcc and aa3 complexes was indicated by the findings that levels of detergent sufficient to completely disrupt isolated membranes failed to inhibit quinol-driven O2 reduction, but known inhibitors of the bc1 complex did inhibit quinol-driven O2 reduction. The gene for subunit II of the aa3-type oxidase indicates the presence of additional charged residues in a predicted extramembrane domain, which could mediate an intercomplex association. However, high concentrations of monovalent salts had no effect on O2 reduction, suggesting that ionic interactions between extramembrane domains do not play the major role in stabilizing the bcc-aa3 interaction. Divalent cations did inhibit electron transfer, likely by distorting the electron-transfer interface between cytochrome c1 and subunit II. Soluble cytochrome c cannot donate electrons to the aa3-type oxidase, even though key cytochrome c-binding residues are conserved, probably because the additional residues of subunit II prevent the binding of soluble cytochrome c. The results indicate that hydrophobic interactions are the primary forces maintaining the bcc-aa3 interaction, but ionic interactions may assist in aligning the two complexes for efficient electron transfer.

Direct Evidence That Neural Cell Adhesion Molecule (NCAM) Polysialylation Increases Intermembrane Repulsion and Abrogates Adhesion

Molecular force measurements quantified the impact of polysialylation on the adhesive properties both of membrane-bound neural cell adhesion molecule (NCAM) and of other proteins on the same membrane. These results show quantitatively that NCAM polysialylation increases the range and magnitude of intermembrane repulsion. The repulsion is sufficient to overwhelm both homophilic NCAM and cadherin attraction at physiological ionic strength, and it abrogates the protein-mediated intermembrane adhesion. The steric repulsion is ionic strength dependent and decreases substantially at high monovalent salt concentrations with a concomitant increase in the intermembrane attraction. The magnitude of the repulsion also depends on the amount of polysialic acid (PSA) on the membranes, and the PSA-dependent attenuation of cadherin adhesion increases with increasing PSA-NCAM:cadherin ratios. These findings agree qualitatively with independent reports based on cell adhesion studies and reveal the likely molecular mechanism by which NCAM polysialylation regulates cell adhesion and intermembrane space.

Onset of DNA Aggregation in Presence of Monovalent and Multivalent Counterions

We address theoretically aggregation of DNA segments by multivalent polyamines such as spermine and spermidine. In experiments, the aggregation occurs above a certain threshold concentration of multivalent ions. We demonstrate that the dependence of this threshold on the concentration of DNA has a simple form. When the DNA concentration cDNA is smaller than the monovalent salt concentration, the threshold multivalent ion concentration depends linearly on cDNA, having the form αcDNA+β. The coefficients α and β are related to the density profile of multivalent counterions around isolated DNA chains, at the onset of their aggregation. This analysis agrees extremely well with recent detailed measurements on DNA aggregation in the presence of spermine. From the fit to the experimental data, the number of condensed multivalent counterions per DNA chain can be deduced. A few other conclusions can then be reached: 1), the number of condensed spermine ions at the onset of aggregation decreases with the addition of monovalent salt; 2), the Poisson-Boltzmann theory overestimates the number of condensed multivalent ions at high monovalent salt concentrations; and 3), our analysis of the data indicates that the DNA charge is not overcompensated by spermine at the onset of aggregation.

Purification and Characterization of the tRNA-processing Enzyme RNase BN

RNase BN, a tRNA-processing enzyme previously shown to be required for the 3'-maturation of certain bacteriophage T4-encoded tRNAs, was overexpressed and purified to near homogeneity from Escherichia coli. The purified enzyme, which is free of nucleic acid, is an alpha(2)-dimer with a molecular mass of approximately 65 kDa. RNase BN displays a number of unusual catalytic properties compared with the other exoribonucleases of E. coli. The enzyme is most active at pH 6.5 in the presence of Co(2+) and high concentrations of monovalent salts. It is highly specific for tRNA substrates containing an incorrect residue within the universal 3'-CCA sequence. Thus, tRNA-CU and tRNA-CA are effective substrates, whereas intact tRNA-CCA, elongated tRNA-CCA-Cn, phosphodiesterase-treated tRNA, and the closely related tRNA-CC are essentially inactive as substrates. RNA or DNA oligonucleotides also are not substrates. These data indicate that RNase BN has an extremely narrow substrate specificity. However, since tRNA molecules with incorrect residues within the -CCA sequence are not normally produced in E. coli, the role of RNase BN in uninfected cells remains to be determined.

Cations and anions as modifiers of ryanodine binding to the skeletal muscle calcium release channel.

Rate and equilibrium measurements of ryanodine binding to terminal cysternae fractions of heavy sarcoplasmic reticulum vesicles demonstrate that its activation by high concentrations of monovalent salts is based on neither elevated osmolarity nor ionic strength. The effect of the ions specifically depends on their chemical nature following the Hofmeister ion series for cations (Li+ < NH+4 < K- approximately Cs+ </= Na+) and anions (gluconate- < Cl- < NO3- approximately ClO4- approximately SCN-) respectively, indicating that both are involved in the formation of the salt-protein complex that can react with ryanodine. Activation by rising salt concentrations exhibits saturation kinetics with different dissociation constants (25-11 m) and different degrees of cooperativity (n = 1.5-4.0) for the respective salts. Maximal second order binding rates between 40,000 and 80,000 (m-1 x sec-1) were obtained for chlorides and nitrates of 1a group alkali ions with the exception of lithium supporting only rates of maximally 10,000 (M-1 x sec-1). The nitrogen bases, NH+4 and Tris+, in combination with chloride or nitrate, behave divergently. High maximal binding rates were achieved only with NH4NO3. The dissociation constants for the ryanodine-protein complexes obtained by measurements at equilibrium proved to depend differently on salt concentration, yet, converging to 1-3 nm for the applied salts at saturating concentrations. The salts do not affect dissociation of the ryanodine protein complex proving that the effect of salts on the protein's affinity for ryanodine is determined by their effect on the on-rate of ryanodine binding. ATP and its analogues modify salt action resulting in elevated maximal binding rates and reduction or abolition of binding cooperativity. Linear relations have been obtained by comparing the rates of ryanodine binding at different salt concentrations with the rates or the initial amplitudes (15 sec) of salt induced calcium release from actively loaded heavy vesicles indicating that the various salts promote specifically and concentration dependently channel opening and its reaction with ryanodine.

Interaction of Mant-Adenosine Nucleotides and Magnesium with Kinesin

Displacement of the fluorescent substrate analogue methylanthraniloyl ADP (mant-ADP) from kinesin by excess ATP results in a biphasic fluorescent transient. The pH and microtubule dependence of the rates and amplitudes indicates that the two phases are produced by release of bound mant-ADP, with an excess of the 3'-isomer, followed by the subsequent relaxation of the free 2'- and 3'-isomers to their equilibrium distribution. The first phase for release of mant-ADP is accelerated by microtubules and occurs at the same rate as ADP release measured using [32P]ADP. The second phase is subject to base catalysis and occurs at the same rate as the isomerization of isolated 2'- or 3'-mant-ATP over a 100-fold range of rates. The bound mant-ADP isomers undergo isomerization rapidly when bound to kinesin at pH 8.2, whereas mant-ADP isomers interconvert only slowly when bound to myosin. No fluorescence resonance energy transfer occurs between the single tryptophan in the kinesin neck domain and bound mant-ADP, but efficient energy transfer does occur from protein tyrosine groups. The rate of mant-ADP release in the absence of microtubules is minimal (0.005 s-1) at pH 7-8, 2 mM Mg2+, and 25 mM KCl but is accelerated at lower pH (0.04 s-1 at pH 5.5) and either lower or higher [KCl] (0.01 and 0. 06 s-1 at 0 and 800 mM KCl, respectively). The microtubule-stimulated rate of ADP release is accelerated at low pH and inhibited by high concentrations of monovalent salts. Reduction of the free Mg2+ by addition of excess EDTA increases the release of mant-ADP from E.MgADP to 0.03 s-1. This acceleration at low Mg2+ likely represents sequential release of Mg2+ at 0.03 s-1 followed by rapid release of ADP, as the rate of ADP release from Mg-free E.ADP is fast (>0.5 s-1). At high Mg2+, rebinding of Mg2+ to E.ADP forces release of ADP from the E.MgADP complex at 0.005 s-1.

Kinetics and thermodynamics of thermal denaturation in acyl carrier protein.

The denaturation of Escherichia coli acyl carrier protein (ACP) in buffers containing both monovalent and divalent cations was followed by variable-temperature NMR and differential scanning calorimetry. Both high concentrations of monovalent salts (Na+) and moderate concentrations of divalent salts (Ca2+) raise the denaturation temperature, but calorimetry indicates that a significant increase in the enthalpy of denaturation is obtained only with the addition of a divalent salt. NMR experiments in both low ionic strength monovalent buffers and low ionic strength monovalent buffers containing calcium ions show exchange between native and denatured forms to be slow on the NMR time scale. However, in high ionic strength monovalent buffers, where the temperature of denaturation is elevated as it is in the presence of Ca2+, the transition is fast on the NMR time scale. These results suggest that monovalent and divalent cations may act to stabilize ACP in different ways. Monovalent ions may nonspecifically balance the intrinsic negative charge of this protein in a way that is similar for native, denatured, and intermediate forms. Divalent cations provide stability by binding to specific sites present only in the native state.

Heavy and light chain variable region sequences and antibody properties of anti-phosphotyrosine antibodies reveal both common and distinct features.

Phosphotyrosine and similar analogs have been used to elicit antibodies that have found widespread use in the study of cellular tyrosine phosphorylation. In order to better understand the anti-phosphotyrosine immune response and to elucidate the details of the specific association between a tyrosine phosphate and an antibody combining site, we have undertaken a detailed comparison of antibody stability, specificity, apparent affinity, and primary structure for eight different anti-phosphotyrosine antibodies derived from immunizations with three different antigens. Two of these, 2G8 and 1G2, were derived from an immunization using azobenzylphosphonate conjugated to carrier, and five others, Py2, Py20, Py42, Py54, and Py69, were the products of an immunization with phosphotyrosine conjugated to carrier. Each of these anti-hapten antibodies was an IgG. One antibody, 129, an IgM, was the result of an immunization with a mixture of tyrosine-phosphorylated proteins which had been purified from growth factor treated cells. We found that antibody binding was significantly inhibited by millimolar levels of divalent cations or high concentrations of monovalent salt, with the exception of the antibody 129 where binding was significantly enhanced by both. Under optimal conditions, the highest apparent affinities for phosphotyrosine were observed for antibodies Py69 and Py20 (10(-6)-10(-7) M) and the lowest for 129 and 1G2 (10(-3)-10(-4). The heavy and light chain variable regions of seven of these antibodies were cloned and sequenced and a predominant anti-phosphotyrosine response was observed. The light chains of these antibodies could be assigned to one of two major VK groups, VK10 and VK19, with sequence identity between the different light chains of each class ranging from 65 to 100% at the amino acid level. Similar sequence identity was found among the heavy chain sequences (89-98% identity at the amino acid level) with the exception of one antibody, 2G8, which was only distantly related to the others (61-64% amino acid identity). These heavy chains belong to the same heavy chain family, J558. Two of the antibodies, Py20 and Py69, were clearly derived from the same progenitor cell since both share a highly unusual apparent V-D-D-JH organization. However, a significant level of somatic mutation has occurred between the two antibodies resulting in subtle changes in their apparent affinity and specificity.

The rate and specificity of a group I ribozyme are inversely affected by choice of monovalent salt

The fifth intron of the COB gene of yeast mitochondria splices autocatalytically. The rate of splicing is increased by high concentrations of monovalent salts, but the choice of both cation and anion is significant: The smaller the cation in solution, the faster the reaction (the rate in K+ greater than NH4+ greater than Na+ greater than Li+). Chloride, bromide, iodide and acetate salts enhance autocatalytic processing, but sulfate salts do not and fluoride salts are inhibitory. The choice of monovalent salt affects the KM of the intron for guanosine nucleotide, implying an alteration in the affinity of the RNA for that substrate. Under optimal conditions (1M KCl, 50 mM MgCl2) the catalytic efficiency of this intron exceeds that reported for the ribosomal intron from Tetrahymena, but several side reactions occur, including guanosine-addition within the downstream exon. The site of addition resembles the 5' splice junction, but selection of this site does not involve the internal guide sequence of the intron.

Some properties of linear double-stranded DNAs in particles of medium-size bacteriophages

Absorption and circular dichroism (c.d.) spectra of DNA in particles of five linear double-stranded DNA containing phages (T7, Sd. FJ5, SB1 and IRA) were measured and compared with those of the respective free DNAs. All the five intraphage DNAs were found to differ from the free DNAs in absorption and c.d. spectra. Effects of high concentrations of monovalent salts (LiCl, NaCl and NaClO4) on c.d. spectra of free and intraphage DNAs were found to differ significantly as well. On the other hand, no differences in dimethylsulphate modification of free intraphage T7 and Sd DNA were observed. The results obtained are considered in view of the three existing hypotheses on the origin of the anomalous properties of intraphage DNA and these results do not agree with them.