High Barium Research Articles

Life-Threatening Hypokalemic Paralysis and Prevention of Severe Rebound Hyperkalemia in a Female with Barium Poisoning: A Rare Case Report

Hypokalemic paralysis is a clinical syndrome characterized by acute flaccid paralysis with concomitant hypokalemia. Complications, such as acute respiratory failure and cardiac arrhythmias, can be fatal. If treated appropriately, the patient can recover without any sequelae. We present a rare case of life-threatening hypokalemic paralysis following the ingestion of an unknown substance. At presentation, her serum potassium concentration was 1.9 mmol/L. A review of the patient’s history confirmed the ingestion of barium chloride. She was diagnosed with acute barium poisoning characterized by high serum and urine barium levels. Aggressive potassium repletion was administered intravenously and orally. Her serum potassium concentration dropped to 1.5 mmol/L and peaked at 5.4 mmol/L following treatment. The patient achieved a complete recovery and was discharged without sequelae. Barium can competitively block the potassium inward rectifier channels and interfere with the efflux of intracellular potassium, leading to severe hypokalemia. Our report illustrates a rare presentation of acute barium intoxication and a differential diagnosis indicating hypokalemic paralysis. We also discuss the pathophysiological features and compare the clinical findings with cases of rebound hyperkalemia.

Microlens Hollow-Core Fiber Probes for Operando Raman Spectroscopy.

We introduce a flexible microscale all-fiber-optic Raman probe which can be embedded into devices to enable operando in situ spectroscopy. The facile-constructed probe is composed of a nested antiresonant nodeless hollow-core fiber combined with an integrated high refractive index barium titanate microlens. Pump laser 785 nm excitation and near-infrared collection are independently characterized, demonstrating an excitation spot of full-width-half-maximum 1.1 μm. Since this is much smaller than the effective collection area, it has the greatest influence on the collected Raman scattering. Our characterization scheme provides a suitable protocol for testing the efficacy of these fiber probes using various combinations of fiber types and microspheres. Raman measurements on a surface-enhanced Raman spectroscopy sample and a copper battery electrode demonstrate the viability of the fiber probe as an alternative to bulk optic Raman microscopes, giving comparable collection to a 10 objective, thus paving the way for operando Raman studies in applications such as lithium battery monitoring.

Optimizing the composition of barium-borate glasses for enhancing thermal neutron shielding efficiency: Monte Carlo simulation

A transparent window with thermal neutron shielding properties was an important part of the stations of the nuclear reactors and the particle accelerators. The borate glass with a high neutron cross section was a candidate as a glass network for the neutron shielding window. In order to slow down thermal neutrons, they were trapped by boron and subsequently emitted secondary radiation, such as alpha particles and gamma-ray radiation. This work was to optimize the content between a ratio of borate with a high cross-section neutron interaction and barium for shielding alpha and gamma ray. The barium-borate glasses were successfully synthesized using the melting technique in the atmosphere. Measurements of mechanical and optical glass properties were presented. The measured results showed that an increase in barium oxide content in the glass ratio enhanced the glass density and the transmittance at a visible wavelength. In the calculation of radiation shielding properties, FLUKA code based on Monte Carlo Simulation was demonstrated. The calculated results revealed that an increase in the barium oxide content in the glass composition reduced the thermal neutron shielding properties of the glass samples. In contrast, the glass with barium contents enhanced the photon-shielding efficiency, as indicated by the mass attenuation coefficient and half-value layer. Not only the ratio of the barium and borate contents affected the shielding properties, but the increased glass thickness also enhanced the shielding properties. Thus, the utilization of cooperative borate glasses and barium with appropriate thickness could potentially serve as a viable option for simultaneously protecting against thermal neutrons and photons. The barium-borate glasses with our composition might be used as a window in a thermal neutron station as well as for photon radiation.

Ceiling of Barium Substitution for B-Site Cation in Organometal Halide Perovskite Solar Cells

Significant advancements have been made in the development of perovskite solar cells (PSCs) in recent years, resulting in increased efficiency rates. Nonetheless, the presence of lead within these cells has become a pressing concern. Our study investigates the correlation between tolerance of barium substitution and A-site cation composition through systematic analysis of morphology, crystal structure, optical property, and carrier dynamics. The results show that a high barium substitution ratio of 15 mol.% can be achieved by inducing 60 mol.% of a large A-site cation, formamidinium, into the methylammonium-based perovskite. The induction of large A-site cations in barium-substituted perovskite overcomes the imbalance between hole and electron diffusion lengths, resulting in an electron and a hole diffusion length of 395 nm and 440 nm, respectively. The champion device for 15 mol.% barium-substituted perovskite, FA0.6MA0.4Pb0.85Ba0.15I3-yCly, achieves a PCE of 11.13%, which is the highest record for 15 mol.% of lead reduction. This study provides insights into the limitations of lead substitution in perovskite solar cells and highlights the ceiling for barium substitution ratio in mixed cation perovskite.

Effect of alkaline and alkaline earth ratios on the colour development of malayaite-based ceramic ink

In this study, pink colour development was investigated by changing systemically alkaline and alkaline earth ratios of the developed glaze. Group-1 (Na2O/CaO, Na2O/MgO, Na2O/BaO) and Group-2 (CaO/MgO, CaO/BaO) represent compositional variations. Group-1 has alkaline oxides with changing ratios of 0.2 mol Na2O and 0.6 mol CaO and 0.2 mol Na2O and 0.2 mol BaO, respectively. These ratios vary as 0.2 mol CaO and 0.1 mol BaO in Group-2. According to the results, the pink colour intensity was improved in the compositions with cassiterite (SnO2) and malayaite CaSn(SiO5) phases. In addition, bar-shaped BaO–CaO–Al2O3–SiO2 crystals were observed in structures with high barium oxide content. It could be concluded that the pink colour development regarding the a* (redness) value may also be related to the presence of BaO–CaO–Al2O3–SiO2

Investigation and production of high purity lanthanum and barium hexaaluminate ceramic powders

This study presents synthesis of Lanthanum Hexaaluminate (LHA: LaAl11O18) and Barium Hexaaluminate (BHA: BaAl12O19) with co-precipitation (CP), wet impregnation (W) and solid-state routes with different sintering profiles and carbon templating route. The effect of different synthesis methods and process parameters was investigated on the % of hexaaluminate phase formation confirmed by XRD-Rietveld Refinement and BET surface area measurements with N2 physisorption. LHA with high purity of 95% was successfully prepared confirmed by Rietveld refinement of XRD analysis with a BET surface area of 2 m2/g through co-precipitation (CP) method when the powder was sintered at 1600 °C. Carbon templating increased the surface area to 50 m2/g at a sintering temperature of 1200 °C with a lower LHA content of 77%. It was observed that BHA could be formed at lower temperatures, at 1400 °C, compared to LHA.

Whispering Gallery Mode Microresonator Sensor Integrated in Exposed Core Fiber for Label-Free DNA Hybridization Detection

A novel optical fiber sensor using exposed-core fiber (ECF) to excite whispering gallery modes (WGMs) within a high refractive index barium titanate glass microsphere is proposed for achieving label-free real-time specific DNA detection. The microsphere is encapsulated into the exposed channel of the ECF allowing for physical stability while excited WGMs via the evanescent field. The structure enables the sensing area to be exposed to a large amount of aqueous solution and better contact with the sample to be analyzed. Using a transmission measurement, a high Q-factor in the order of 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sup> is obtained in an aqueous environment. To the best of our knowledge, this is the best Q-factor level obtained by the in fiber WGM sensor in an aqueous environment. Specific sequences of probe DNA are then bound to the surface of the microsphere so that specific detection of complementary DNA can be realized by tracking the wavelength shift the WGM resonance. Experimental results show a red shift of 5.6 pm for complementary DNA hybridization detection and less than 1 pm fluctuation for non-complementary DNA detection. The portable integrated sensor with miniature size has great potential for aqueous environmental sensing applications in the fields of diseases diagnostics, chemical analysis, and environmental protection.

A Facile and Eco-Friendly Hydrothermal Synthesis of High Tetragonal Barium Titanate with Uniform and Controllable Particle Size.

The preparation of tetragonal barium titanate (BT) powders with uniform and suitable particle sizes is a significant prerequisite for ultra-thin and highly integrated multilayer ceramic capacitors (MLCCs). However, the balance of high tetragonality and controllable particle size remains a challenge, which limits the practical application of BT powders. Herein, the effects of different proportions of hydrothermal medium composition on the hydroxylation process are explored to obtain high tetragonality. The high tetragonality of BT powders under the optimal solvent condition of water:ethanol:ammonia solution of 2:2:1 is around 1.009 and increases with the particle size. Meanwhile, the good uniformity and dispersion of BT powders with particle sizes of 160, 190, 220, and 250 nm benefit from the inhibition of ethanol on the interfacial activity of BT particles (BTPs). The core-shell structure of BTPs is revealed by different lattice fringe spacings of the core and edge and the crystal structure by reconstructed atomic arrangement, which reasonably explains the trend between tetragonality and average particle size. These findings are instructive for the related research on the hydrothermal process of BT powders.

Solvothermal-based synthesis of barium stannate nanosheets coupled with copper manganate nanoparticles for efficient photooxidation of tetracycline under visible light

Photocatalytic oxidation of antibiotic waste over semiconducting heterojunction photocatalysts is considered eco-friendly because it is simple and operates under light irradiation. In this work, we apply a solvothermal-based process for obtaining high surface area barium stannate (BaSnO3) nanosheets followed by adding 3.0–12.0 wt% of spinel copper manganate (CuMn2O4) nanoparticles to form n-n CuMn2O4/BaSnO3 heterojunction photocatalyst after calcination process. The CuMn2O4-supported BaSnO3 nanosheets exhibit mesostructure surfaces with a high surface area range of 133–150 m2g−1. Moreover, introducing CuMn2O4 to BaSnO3 shows a significant broadening in visible light absorption range due to bandgap reduction down to 2.78 eV in 9.0% CuMn2O4/BaSnO3 compared to 3.0 eV for pure BaSnO3. The produced CuMn2O4/BaSnO3 is used for photooxidation of tetracycline (TC) in water as emerging antibiotic waste under visible light. The photooxidation of TC exhibits the first-order reaction model. The specific dose of 9.0 wt% CuMn2O4/BaSnO3 at 2.4 gL−1 displays the highest-performed and recyclable photocatalyst for total oxidation of TC after 90 min. This sustainable photoactivity is attributed to the improved light harvesting and charges migration upon coupling between CuMn2O4 and BaSnO3.

Composition Analysis and Identification Scheme of Ancient Glass Products Based on K-Means Algorithm

Chinese ancient glass mainly includes high potassium glass and lead barium glass. In the process of weathering, its chemical composition is easy to change, affecting the judgment of its category. The data of this study are based on the chemical composition ratio of classified glass relics obtained by preprocessing. Firstly, a random forest model is constructed based on the Gini coefficient to obtain the contribution of lead oxide to the classification. The decision tree in the random forest is extracted, and the optimal classification rule is obtained by using the majority voting mechanism : when ω ( PbO ) is 10 %, it is lead barium glass. Secondly, the K-means clustering algorithm is divided into three sub-categories. The characteristic quantity with large standard deviation is used as the basis for classification, and the classification results are obtained : high potassium glass sub-categories include low calcium type, medium calcium aluminum type and high calcium aluminum type ; lead barium glass subclass includes low barium type, medium lead barium type, high lead barium type. For the identification of unknown types, the Euclidean distance between the unknown category and the sub-category centroid is calculated, and the minimum distance is taken to determine the sub-category it belongs to.

Component Analysis and Classification Model of Ancient Glassware Based on K-means Clustering and Random Forest

The analysis and identification of the composition of ancient glass objects has important application and practical significance to the world of archaeology. In this study, after classifying the artifacts according to their types, the corresponding classification models were analyzed and constructed. Using the analysis of classification laws, for each category to select the appropriate chemical components for subclassification, the K-means cluster analysis model was established, and then secondary components were added to the model to select the appropriate model to achieve clustering. Analysis of the clustering results to achieve subclasses, the glass artifacts into three categories: high lead and high barium artifacts, transitional artifacts, high silicon and high potassium artifacts. The classification results were analyzed for reasonableness, and sensitivity analysis was conducted using the OAT method, which showed that the sensitivity of the classification results was high and the chemical composition had good anti-disturbance ability within 10%. A random forest model was also established to determine the category to which the artifacts belonged based on the known chemical composition.

Constraints of barium isotopes on recycling of ancient oceanic crust in the mantle of the South China Sea

As surface reservoirs (e.g. sediments and altered oceanic crust) have extremely high barium (Ba) concentrations and distinctive Ba isotope compositions compared to the mantle, Ba isotopes have the potential to trace crustal recycling in the mantle. The sediment components and fluids derived from altered oceanic crust in arc lavas and continental basalts have been identified using Ba isotopes, while the geochemical behavior of Ba in subducted oceanic crust remains enigmatic. A series of volcanic breccia that temporally evolved from carbonated silicate clasts to alkali basalts in the South China Sea (SCS) drilled by the Integrated Ocean Discovery Program (IODP) Site U1431 was suggested to originate from the mantle source contaminated by recycled oceanic crust. To understand the potential of using Ba stable isotopes to trace recycled oceanic crust in the mantle, we report high-precision Ba isotope compositions of these samples, together with alkali basalts from adjacent Hainan Island to constrain the Ba isotope characteristics of the Hainan mantle plume. The carbonated silicate clasts and alkali basalts from the SCS display extremely high Ba concentrations and are thus insensitive to magma evolution during ascent through the thin lithospheric mantle and proper to trace crustal materials in their mantle source using Ba isotopes. These samples have variable Ba isotope compositions ranging from δ138/134Ba = −0.10 to +0.05‰, implying local mantle isotopic heterogeneity underlying the SCS. The Ba isotope characteristics of some samples, which are much lighter than those of the mantle-derived carbonatites and global mid-ocean ridge basalts (MORBs), in conjunction with trace element ratios and radiogenic isotope compositions, reflect significant incorporation of recycled carbonated oceanic crust after subduction-related dehydration. The rising of the Hainan mantle plume offers the most reasonable interpretation of the entrainment of the recycled oceanic crust in the carbonated silicate magmatism beneath the SCS. Alkali basalts from Hainan Island display Ba isotope characteristics slightly heavier than the SCS carbonated silicate clasts and alkali basalts. It implies that the Hainan mantle plume underlying Hainan Island contains less recycled-oceanic-crust components than that underneath the SCS. This study highlights Ba isotopes as effective tracers of recycled oceanic crust in the mantle.

A neutron diffraction investigation of high valent doped barium ferrite with wideband tunable microwave absorption

The barium ferrite BaTixFe12−xO19 (x = 0.2, 0.4, 0.6, 0.8) (BFTO-x) ceramics doped by Ti4+ were synthesized by a modified sol—gel method. The crystal structure and magnetic structure of the samples were determined by neutron diffraction, and confirm that the BFTO-x ceramics were high quality single phase with sheet microstructure. With x increasing from 0.2 to 0.8, the saturation magnetization (Ms) decreases gradually but the change trend of coercivity (Hc) is complex under the synergy of the changed grain size and the magnetic crystal anisotropy field. Relying on the high valence of Ti4+, double resonance peaks are obtained in the curves of the imaginary part of magnetic conductivity (μ″) and the resonance peaks could move toward the low frequency with the increase of x, which facilitate the samples perform an excellent wideband modulation microwave absorption property. In the x = 0.2 sample, the maximum reflection loss (RL) can reach −44.9 dB at the thickness of only 1.8 mm, and the bandwidth could reach 5.28 GHz at 2 mm when RL is less than −10 dB. All the BFTO-x ceramics show excellent frequency modulation ability varying from 18 (x = 0.8) to 4 GHz (x = 0.4), which covers 81% of the investigated frequency in microwave absorption field. This work not only implements the tunable of electromagnetic parameters but also broadens the application of high-performance microwave absorption devices.

High dielectric barium titanate porous scaffold for efficient Li metal cycling in anode-free cells

Li metal batteries are being intensively investigated as a means to achieve higher energy density when compared with standard Li-ion batteries. However, the formation of dendritic and mossy Li metal microstructures at the negative electrode during stripping/plating cycles causes electrolyte decomposition and the formation of electronically disconnected Li metal particles. Here we investigate the use of a Cu current collector coated with a high dielectric BaTiO3 porous scaffold to suppress the electrical field gradients that cause morphological inhomogeneities during Li metal stripping/plating. Applying operando solid-state nuclear magnetic resonance measurements, we demonstrate that the high dielectric BaTiO3 porous scaffold promotes dense Li deposition, improves the average plating/stripping efficiency and extends the cycling life of the cell compared to both bare Cu and to a low dielectric scaffold material (i.e., Al2O3). We report electrochemical tests in full anode-free coin cells using a LiNi0.8Co0.1Mn0.1O2-based positive electrode and a LiPF6-based electrolyte to demonstrate the cycling efficiency of the BaTiO3-coated Cu electrode.

Reactive transport model of kinetically controlled celestite to barite replacement

Abstract. Barite formation is of concern for many utilisations of the geological subsurface, ranging from oil and gas extraction to geothermal reservoirs. It also acts as a scavenger mineral for the retention of radium within nuclear waste repositories. The impact of its precipitation on flow properties has been shown to vary by many orders of magnitude, emphasising the need for robust prediction models. An experimental flow-through column setup on the laboratory scale investigating the replacement of celestite (SrSO4) with barite (BaSO4) for various input barium concentrations was taken as a basis for modelling. We provide here a comprehensive, geochemical modelling approach to simulate the experiments. Celestite dissolution kinetics, as well as subsequent barite nucleation and crystal growth were identified as the most relevant reactive processes, which were included explicitly in the coupling. A digital rock representation of the granular sample was used to derive the initial inner surface area. Medium (10 mM) and high (100 mM) barium input concentration resulted in a comparably strong initial surge of barite nuclei formation, followed by continuous grain overgrowth and finally passivation of celestite. At lower input concentrations (1 mM), nuclei formation was significantly less, resulting in fewer but larger barite crystals and a slow moving reaction front with complete mineral replacement. The modelled mole fractions of the solid phase and effluent chemistry match well with previous experimental results. The improvement compared to models using empirical relationships is that no a-priori knowledge on prevailing supersaturations in the system is needed. For subsurface applications utilising reservoirs or reactive barriers, where barite precipitation plays a role, the developed geochemical model is of great benefit as only solute concentrations are needed as input for quantified prediction of alterations.

S454 Utility of High Resolution Manometry, Barium Esophagram and Endoscopic Ultrasound to Assess Length of Spastic Segment in Type 3 Achalasia

S454 Utility of High Resolution Manometry, Barium Esophagram and Endoscopic Ultrasound to Assess Length of Spastic Segment in Type 3 Achalasia

Odiel River (SW Spain), a Singular Scenario Affected by Acid Mine Drainage (AMD): Graphical and Statistical Models to Assess Diatoms and Water Hydrogeochemistry Interactions.

The Odiel River (SW Spain) is one of the most cited rivers in the scientific literature due to its high pollution degree, generated by more than 80 sulphide mines’ (mostly unrestored) contamination in the Iberian Pyritic Belt (IPB), that have been exploited for more than 5000 years. Along the river and its tributaries, the physico-chemical parameters and diatoms, from 15 sampling points, were analyzed in the laboratory. Physico-chemical parameters, water chemical analysis, together with richness and Shannon–Wiener indexes were integrated in a matrix. An initial graphical treatment allowed the definition and proposal of a functioning system model, as well as the establishment of cause–effect relationships between pollution and its effects on biota. Then, the proposed model was statistically validated by factor analysis. For acidic pH waters, high values of Eh, TDS, sulphate, ∑REE and ∑Ficklin were found, while diatomologic indicators took low values. Thus, factor analysis was a very effective tool for graphical treatment validation as well as for pollution–biota interaction models’ formulation, governed by two factors: AMD processes and water balance suffered by the studied river. As a novelty, the cause–effect relationships between high barium concentration and low diversity and richness were demonstrated in the IPB, for the first time.

Evaluation of Element Mobility in River Sediment Using Different Single Extraction Procedures and Assessment of Probabilistic Ecological Risk

In this manuscript, samples of Kupa River sediments were examined using three different extraction agents. The aim of this study was to evaluate the applicability of single extraction procedures to investigate the bioavailability and mobility of major and trace elements (Al, As, Ba, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, P, Pb, S, Si, Sr, Ti, V, and Zn) from river sediment. Two forms of studied elements were evaluated: mobile, the most toxic element form (extraction with 1 M CH3COONH4 and 0.01 M CaCl2) and potentially mobilized form (2 M HNO3 extraction). The estimation of the ecological risk, with the application of the probability distribution of RI (potential ecological risk index) values, is yielded with the help of the Monte Carlo simulation (MCS). Ammonium acetate is proved to be a better extraction agent than calcium chloride. A positive correlation between the content of all extracted elements with nitric acid and the total element content indicates that 2 M HNO3 efficiently extracts all studied elements. Results showed anthropogenic sources of cadmium and copper and high barium mobility. The MCS suggests that risk of Cr, Cu, Ni, Pb, and Zn was low; As and Cd posed a lower and median ecological risk in the studied areas.

Metallogenesis of the Rhyacian Lavra Velha gold-rich IOCG deposit in the São Francisco Craton, Brazil

• The Lavra Velha deposit represents a new gold-rich IOCG mineralization at the São Francisco Craton . • The gold mineralization is associated with a hydrothermal breccia system with co-existing iron oxides and sulfides. • IOCG mineralization is related to the Rhyacian period of the northern São Francisco Craton. • Mineralization is marked by decreasing temperatures from the bottom to the top of the deposit. Lavra Velha is a newly discovered Rhyacian IOCG deposit in the northern portion of the São Francisco Craton, in the Bahia state of NE Brazil. Gold and copper mineralization is hosted by epigenetic hydrothermal breccia with large amounts of iron oxide. Multiple phases of breccia formation and hydrothermal alteration caused zoning from the base to the top of the deposit. The alteration is mainly characterized by hydrothermal calcite-epidote-magnetite, tourmaline-chlorite-magnetite, and sericite-hematite hydrothermal alteration styles. Tourmaline and chlorite chemistry indicates that low temperature alkaline fluids had variable Fe 2+ , Mg, Al, and Na contents throughout the evolution of the breccia complex. Magnetite and hematite display low vanadium content (≤0.24 wt%) and very low titanium content (≤0.06 wt%). The sulfide minerals are pyrite (with up to ~ 3 wt% Co), chalcopyrite, bornite, arsenopyrite, and covellite, in decreasing order of abundance. Coarse muscovite that is related to the latest stages of breccia displays a high barium content with an average of ≥ 1.27 wt%. Isotopic compositions of carbon and oxygen in calcite from the calcic breccia indicate that early mineralizing fluids were derived from a mixed magmatic/non-magmatic reservoir (δ 13 C ~ −2‰ and δ 18 O from 9.95 to 13.09‰ in calcite). The sulfur isotopic compositions of chalcopyrite and pyrite demonstrate that sulfur in the mineralized breccia was derived from cooling magmas that underwent weak contamination from oxidized fluids or host rocks (δ 34 S from 2.22 to 3.89‰). New U-Pb zircon ages indicate that mineralization occurred at approximately 2100 Ma, coeval with tourmaline-bearing porphyritic granite dikes that yield ages of 2098 ± 8 and 2112 ± 12 Ma respectively. Despite being considered a small deposit in relation to known reserves, Lavra Velha may be the first IOCG deposit recognized in the São Francisco Craton, particularly in the Gavião Block. Thus, it represents an important indicator for future precious and base metal exploration in the São Francisco Craton.

Effect of Nano-Size Magnetic Additions on Low Temperature Flux Pinning of Y-Ba-Cu-O Thin Films

Manufacturing of coated conductors can be tailored for future use operating parameters, such as high temperature and low field, mid temperature and mid field and low temperature and high field. Different methods of flux pinning are being tested world-wide to enhance critical currents of high temperature superconductor yttrium barium copper oxide coated conductors for these various operating conditions. Magnetic materials are interesting to consider as flux pinning additions because of their potential for very strong pinning strength. This research describes the study of different magnetic phase additions to superconducting thin films, including: BaFe <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> O <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">19</sub> , La <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.67</sub> Ca <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.33</sub> MnO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> , Y <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> Fe <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">5</sub> O <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> , and SrRuO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> . Nano-size additions with volume percent ranging from 0.5% to 5% were incorporated by utilizing pulsed laser deposition to form alternating layers of magnetic dopants and yttrium barium copper oxide to minimize degradation of <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">T_c</i> . Experimental critical current density ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">J_cm</i> ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">H,T</i> )) results for mid temperature (30 K–65 K) / mid field (1 T–5 T) and low temperature (<30 K) / high field (>5 T) and microstructural TEM are presented. Results illustrate the benefits and interplay of combining magnetic flux pinning and core pinning by the magnetic additions and associated film defects, and suggest applications suitable for each system studied.