Heterogeneous Rock Mass Research Articles

Қазба айналасындағы тау массивінің жағдайын ескере отырып, контурға жақын топырақ жыныстарын бекіту

The maintenance of excavation workings will also require significant repair costs both before and after they are put into operation, especially in the zone of influence of stoping operations. Maintaining and increasing the volume of underground coal mining is possible only if there is a highly efficient technology for conducting and maintaining development workings. The purpose of the research was to evaluate the stability control parameters of the contours of mine workings, fixed with anchor bolting, in order to create a technology for intensive and safe excavation of excavation workings based on the identified patterns of behavior of adjacent rock masses. The idea of the approach is to use the technogenic stress-strain state to develop an effective technology for fastening the near-contour rock mass. The mechanism of deformation, displacement and collapse of rocks in a structurally disturbed heterogeneous rock mass was studied to assess the state of the rock mass around mine workings. A technology for fastening near-contour soil rocks has been developed, taking into account the state of the rock mass around the working, and the parameters for the operation of rock bolts in mines for fixing rods in workings in order to ensure the safety of mining operations in the mines of the Karaganda coal basin have been determined.

Progressive failure and quantitative stability analysis of rock slope with cross-type discrete fracture network using spring-based smoothed particle hydrodynamics method

The propagation and coalescence of discontinuous cross-type joints are often the primary drivers of rock slope failures. Due to the inherent randomness of these joints, identifying suitable methods to accurately characterize progressive failure and quantitatively assess the stability of slopes with cross-type joints is particularly challenging. To address this, a Discrete Fracture Network-Spring Based-Smoothed Particle Hydrodynamics (DFN-SB-SPH) method is proposed, which considers cross-type DFN generation, rock matrix heterogeneity, cracking, block contact, and deposition within a unified SPH framework. In this approach, damage and contact of blocks are achieved by introducing a fracture sign to enhance the kernel function and applying Newton's law to the damaged particles to realize the point to point contact. A uniaxial compression test on rock samples with double fissures is carried out to verify the accuracy of the proposed method. The influence of joint density, geometric parameters (i.e., trace length, dominate dip angle) of cross joints, and rock mass heterogeneity on the failure characteristics of RSCD are investigated. The results revealed that the DFN-SB-SPH model possesses robust capabilities for crack tracking, mass movement, and contact slipping along fracture surfaces. Moreover, DFN generation, heterogeneous characterization, shear and tensile fractures within a single SPH framework without mesh distortion are realized. Five typical failure modes calculated by DFN-SB-SPH are primarily determined by the combination of joint dip angles and trace lengths. Furthermore, the dip angle, trace length, joint density, and rock mass heterogeneity significantly alter the stability of RSCD with sensitivity coefficients for factor safety of 27.7 %, 44.6 %, 72.9 % and 35.0 %, respectively. Higher dominant dip angles (above 60°) lead to significantly longer run-out distances for RSCD compared to lower angles (below 30°) once instability occurs. The sudden rise in major principal stress at the slope's top and toe, along with the shift of tensile stress concentration towards the middle, predicts the stages of crack propagation and sliding in slope failure.

Geotechnical Characterisation of Flysch-Derived Colluvial Soils from a Pre-Alpine Slope Affected by Recurrent Landslides

Heterogeneous rock masses that include rhythmic alternations of marl, shale, marly limestone, sandstone, siltstone, and argillite, such as Flysch, are particularly prone to generating colluvial deposits on gentle slopes, which are often subject to failures triggered by heavy rainfall. Flysch-derived colluvial soils are made up of highly heterogeneous sediments ranging from clayey loam to rock fragments, and they have been studied more rarely than homogeneous soils. In this work, we present a geotechnical and hydraulic characterisation performed both in situ and in the laboratory on flysch-derived colluvial soils that were involved in a channelised landslide in the pre-alpine area of the Friuli Venezia Giulia region (NE Italy). The investigated soils were characterised by the average values of the grain size composition of about 25% gravel, 20% sand, 30% silt, and 25% clay. The loamy matrix presented low-to-medium values of the liquid and plastic limits, as well as of the plasticity index (LL = 40%, PL = 23%, and PI = 17%, respectively). The values of the peak friction angle for natural intact samples were 33° < ϕ’p < 38°, whereas the residual friction angle fell to 23–24° at great depths and high vertical stresses, for a prevailing silty–clayey matrix. Variable head permeability tests were performed both in situ and in the laboratory, showing that the values of the vertical and horizontal permeability were very close and in the range 1 × 10−4–1 × 10−6 m/s. The soil permeability measured in the field was generally higher than the hydraulic conductivity calculated on laboratory samples. The proposed geotechnical and hydrological characterisation of flysch-derived colluvial soils can be of fundamental importance before the use of more thorough analyses/models aimed at forecasting the possible occurrence of slope failures and evaluating the related landslide hazard. The reported geotechnical and hydraulic parameters of flysch-derived colluvial materials can represent a useful reference for rainfall infiltration modelling and slope stability analyses of colluvial covers that are subject to intense and/or prolonged precipitation. However, when facing engineering problems involving colluvial soils, particularly those coming from flysch rock masses, the intrinsic variability in their grain size composition, consistency, and plasticity characteristics is a key feature and attention should be paid to the proper assumption of the corresponding geotechnical and hydraulic parameters.

Modelling method of heterogeneous rock mass and DEM investigation of seepage characteristics

The Weibull distribution is used to describe the heterogeneity of rock hydraulics and embedded into the Fish program which is based on the discrete element method. The developed program overcomes the limitation of the Universal Distinct Element Code (UDEC) software regarding the number of parameter groups, which cannot exceed 50. A method for parameter assignment of heterogeneous rocks is proposed together with a method for estimating the initial flow rate value of heterogeneous models. Based on the established heterogeneity calculation model, the influence of block homogeneity, hydraulic aperture homogeneity, and stress on the seepage characteristics is studied. The results indicate that under zero stress conditions, the flow rate is positively correlated with N0.5 showing a strong linear relationship. The linear relationship is gradually enhanced with the increase in the shape parameters. The relationship between the flow rate and shape parameters is logarithmic with a correlation coefficient greater than 0.9654. The relationship between the flow rate and the axial pressure and confining pressure can be described by quadratic and cubic polynomials, respectively, based on which we further discuss the variation characteristics of equivalent hydraulic apertures under the various axial pressures, confining pressures, and shape parameters.

An Improved Rock Damage Characterization Method Based on the Shortest Travel Time Optimization with Active Acoustic Testing

Real-time evaluation of the damage location and level of rock mass is essential for preventing underground engineering disasters. However, the heterogeneity of rock mass, which results from the presence of layered rock media, faults, and pores, makes it difficult to characterize the damage evolution accurately in real time. To address this issue, an improved method for rock damage characterization is proposed. This method optimizes the solution of the global shortest acoustic wave propagation path in the medium and verifies it with layered and defective media models. Based on this, the relationship between the inversion results of the wave velocity field and the distribution of rock damage is established, thereby achieving quantitative characterization of rock damage distribution and degree. Thus, the improved method is more suitable for heterogeneous rock media. Finally, the proposed method was used to characterize the damage distribution evolution process of rock media during uniaxial compression experiments. The obtained results were compared and analyzed with digital speckle patterns, and the influencing factors during the use of the proposed method are discussed.

Интерпретация результатов георадарного зондирования скального массива пород с использованием цифрового образа

A methodological approach to interpreting the results of georadar sounding of a rock mass using a digital image is considered. The studies carried out have established that during the georadar probing of the rock masses, distortion of the induced electromagnetic field is observed in areas with different physical properties of the rocks (such as the rock mass heterogeneity, rock fracturing, zones of increased water saturation). The creation of a digital image of the electromagnetic field caused by ground penetrating radar sounding using computer modeling made it possible to significantly reduce the uncertainty in interpretation of the obtained field data through understanding the mechanism of formation of the wave characteristics and comparing synthetic data with the in-situ data. Regularities in formation of the wave patterns of the ground penetrating radar model data (changes in the in-phase axes and amplitude characteristics of the signal) of a rock mass containing structural heterogeneities have been identified. When sounding such a rock mass with the georadar, reflections from the edges of heterogeneities appear in the wave patterns in the form of hyperbola branches. The intensity of the wave field distortion is determined by the contrast of the physical properties of rocks, as well as by the spatial orientation and depth of the heterogeneity, which is a key parameter of georadar sensing. It has been established that the variability of the physical properties of rock masses near disturbances introduces significant distortions into the parameters determined by georadar sounding, including the angle of incidence of disturbances. The considered methodological approach provides the basis for creating a digital image of georadar probing of a rock mass.

Macro–Micro Failure and Energy Evolution in Heterogeneous Fault Rock Masses

Macro–Micro Failure and Energy Evolution in Heterogeneous Fault Rock Masses

Field surveys in heterogeneous rock masses aimed at hydraulic conductivity assessment

In heterogeneous and fractured rock masses, joints are the most important elements controlling the hydraulic conductivity. Joints parameters are therefore crucial for estimating transport of mass and energy in many technical problems (e.g., slope stability, tunnels, geothermal and oil and gas studies). Hydraulic conductivity conceptual models follow well understood generalizations, but their quantitative estimation is not simple. Both laboratory and field tests have many limitations due to representativeness and scale effects. This study proposes a methodology for a preliminary hydraulic conductivity estimation in fractured and/or heterogeneous rock masses through a combination of in-situ geomechanical and geophysical measurements. Contact and no-contact geomechanical surveys were coupled with electric resistivity topographies in two selected test sites within a Mexican geothermal area in the framework of the Ge-Mex H2020 project. The test sites are representative of two different geological settings: a faulted rock mass with expected high hydraulic conductivity in proximity of the faulted areas and an abandoned marble quarry, with very good mechanical characteristics and negligible degree of fracturing. Moreover, both of them are located in remote areas with limited accessibility, in which rapid, time and cost-effective procedures are welcomed and recommended. The preliminary findings of this study were promising: estimated hydraulic conductivities were compared with independent laboratory measurements performed by other researchers showing a good correspondence and reliability. The proposed methodology demonstrated its reliability in decision making, in the technical support and its economical applicability also in similar difficult logistic situations.Article HighlightsA combination of in-situ geomechanical and geophysical measurements was adopted for a preliminary hydraulic conductivity estimation;Obtained field data were compared with independent laboratory estimations to assess the reliability of the proposed approach and compare representativeness and scale effects;Even given the difficult logistic conditions and the limitations of the available comparisons the proposed methodology demonstrated its reliability in decision making.

Modeling heterogeneity and permeability evolution in a compaction band using a phase-field approach

Compaction bands are tabular zones of localized compressive deformation associated with porosity and permeability reduction. Depending on their orientation, compaction bands can act as barriers to fluid flow, and can be detrimental to fluid production in oil and gas reservoirs, as well as in CO2 sequestration. The process of permeability reduction and the development of excess pore pressures during compaction band formation in a heterogeneous rock mass are not fully understood. Furthermore, few studies have modeled compaction band formation considering coupled hydromechanical processes. In this study, we propose a coupled hydromechanical, phase-field approach for capturing the formation and propagation of compaction bands in heterogeneous porous media. Breakage mechanics is adopted to characterize the free energy function in the intact and damaged material. The resulting phase-field variable provides a measure of the degree of grain crushing. Permeability reduction in the zone of compaction localization is modeled using the Kozeny–Carman equation accounting for microstructural evolution. Numerical simulations demonstrate the ability of the model to capture compaction band formation, porosity reduction, and permeability evolution under drained and undrained conditions. The results highlight the role of effective confining pressure, drainage conditions, and material parameters on the styles of compaction bands that form.

Investigation on directional failure mechanism of tunnel peripheral holes induced by instantaneous expansion

Due to the detrimental effects of detonation waves on the stability of surrounding rock, non-explosive excavation techniques for tunnel peripheral holes have been developed. One such method is the instantaneous expander with a single fracture (IESF), which utilizes coal gangue and straw as eco-friendly, recycled components. This paper provides theoretical analysis of the directional failure mechanism of tunnel peripheral holes under the action of IESF, as well as numerical evaluation of its performance relative to conventional blasting (CB) and shaped-charge blasting (SCB) techniques, while accounting for rock mass heterogeneity. A damage variable is introduced to describe the progressive rock failure, and finite element simulations are carried out. Results indicate that IESF outperforms CB and SCB in terms of directional rock failure ability and reducing over/under excavation depth. Moreover, IESF offers superior safety and lower cost. This research reveals the directional progressive failure mechanism of tunnel peripheral holes under instantaneous expansion, providing a theoretical basis for the application of IESF in the shaped-excavation of tunnel peripheral holes.

Rockburst Hazard Evaluation Using an Extended COPRAS Method with Interval-Valued Fuzzy Information

Rockburst is a major disaster in deep mining engineering, which can cause serious injury, death and economic losses. This study aims to solve rockburst hazard evaluation problems and determine the hazard levels of mines under uncertain circumstances. To this end, a novel multicriteria decision-making (MCDM) method was proposed in an interval-valued fuzzy context. The main contributions are three-fold. First, considering the heterogeneity of rock masses and the complexity of mining engineering, interval-valued fuzzy numbers (IVFNs) were adopted to express initial indicator information. Second, accounting for the uncertainty of indicator weights, the decision-making trial and evaluation laboratory (DEMATEL) and entropy methods were extended with IVFNs to determine fuzzy indicator weights comprehensively. Third, the complex proportional assessment (COPRAS) approach was extended with IVFNs to determine the rockburst hazard level. Finally, the proposed method was applied to evaluate rockburst hazards in the Jiaojia gold mine, and the ranking results were consistent with field status. Meanwhile, sensitivity and comparison analyses were performed to reveal the stability and effectiveness of the proposed method. The results indicated that the extended COPRAS method was reliable for rockburst hazard evaluation in deep mining engineering.

A Hybrid Approach to Rock Pre-conditioning Using Non-explosive Demolition Agents and Hydraulic Stimulation

This study presents a novel approach to rock pre-conditioning to promote the sustainability of low-grade ore mining applications such as in-situ recovery and cave mining. The proposed method involves a two-stage hybrid approach, utilizing soundless cracking demolition agents (SCDAs) to initiate radial fractures in a predrilled host rock, followed by hydraulic stimulation to extend the fractures. SCDA injection in the first stage creates multiple radial fractures around the injection well. However, the extent of fractures is limited to the near vicinity of the injection well. To overcome this limitation, the second stage involves the application of hydraulic stimulation to extend the initiated fractures, which produces a greater fracture density compared to pure hydraulic stimulation. The concept was assessed using a fully coupled hydro-mechanical discrete element model that simulated the hybrid fracturing method on crystalline rock at the grain scale. The results indicate that the proposed method can create a high density of fractures around the injection well. Additionally, we identify and evaluate the key factors affecting the performance of the proposed method, including rock mass heterogeneity, stress anisotropy, and pre-existing defects, providing valuable insights for further experimental design and execution. Overall, the study offers promising results for a potential solution to enhance the efficiency of low-grade ore mining through the hybrid rock pre-conditioning method.

Numerical modeling of the failure process of the heterogeneous karst rock mass using the DDA–SPH method

The sanding process caused by karstification in dolomite creates a special sandy dolomite stratum, where the frequent catastrophic instability of the surrounding rock occurred during tunnel construction. In this study, the micro-origin and macro-performance of the sandy dolomite stratum are first discussed. Then, a numerical model based on the coupling method between the discontinuous deformation analysis and smoothed particle hydrodynamics is proposed to depict the heterogeneous dolomite formation with different sanding degrees. Following, the mechanical behaviors of the heterogeneous dolomite samples under uniaxial compression are studied after calibrating the numerical parameters with the two single materials sampled from the tunnel site respectively. Further, the instability disasters of the dolomite surrounding rock with different sanding degrees are reproduced, and the failure behaviors of tunnels are explained with respect to the stress distribution and plastic zone. The obtained results show that the rotation and dislocation of the remained dolomite block contribute to the unsmooth stress–strain curve and deterioration in uniaxial compressive strength. However, the block serves as the skeleton in the transmission of field stress in underground space, which improves the stability of the formation.

Micro-macro damage, deterioration and cracking of heterogeneous composite rock masses with non-penetrating cracks under uniaxial compression

Rock masses with non-penetrating cracks are widely found in nature. Their mechanical behavior plays a key role in rock engineering applications. However, previous studies have concentrated on the single lithologic layer, and few studies have reported the crack coalescence mechanism in heterogeneous composite rock mass with non-penetrating cracks (HCRC). In this study, uniaxial compression tests were performed on HCRC by discrete element numerical simulation experiments. Through the uniaxial compression simulation tests, the stress–strain variation and acoustic emission (AE) characteristics of HCRC are revealed. The instability and failure characteristics, energy evolution law and crack coalescence process of HCRC are also studied. And the influence of the crack numbers and crack positions (in weak body or strong body) on the mechanical behavior and failure processes in heterogeneous composite rock mass is investigated. The results show that the mechanical properties of HCRC are not all weakened with the increase of the crack numbers. As the number of cracks increases, the failure modes of the HCRC changes from brittle failure to ductile failure. The number of cracks will regulate the relative relationship between the strength of the two bodies of heterogeneous composite rock masses, so the crack coalescence forms, instability forms and failure characteristics of the HCRC will also change accordingly. If the number of cracks in the weak body is large, the damage of the HCRC mainly occurs in the weak body. The strong body produces a rebound energy release to the weak body, accelerating the destruction of the weak body. At this time, the overall strength of the HCRC is low. Conversely, increasing the number of cracks in a strong body will weaken the strength of the strong body. At this time, the strength difference between the strong body and the weak body decreases. The HCRC shows that the overall bearing capacity is not lower but becomes stronger. The research results provide a theoretical reference for the stability and disaster prevention of jointed rock mass engineering.

The influence of the heterogeneity of rock mass for surrounding rock stability evaluation of a tunnel

The influence of the heterogeneity of rock mass for surrounding rock stability evaluation of a tunnel

Numerical Investigation of Hydraulic Fracturing in a Heterogeneous Rock Mass Based on Peridynamics

Numerical Investigation of Hydraulic Fracturing in a Heterogeneous Rock Mass Based on Peridynamics

Empirical graphical and numerical model for the schematization of underground mining operations in the heterogeneous rock masses, case of Boukhadra mine, NE Algeria

Empirical graphical and numerical model for the schematization of underground mining operations in the heterogeneous rock masses, case of Boukhadra mine, NE Algeria

Development process and height of the mining-induced water fractured zone over the longwall goaf

Abstract Providing accurate prediction methods for mining-induced water fractured zones over the longwall goaf has become increasingly significant because of the grand economic and technological challenges of deeper extraction. Taking the No. 839 coalface in the Qingdong mining area as a case study, a comprehensive study of the water-flowing fractured zone (WFFZ) formation process and peak height were carried out by the radial basis function (RBF) neural network model, parallel electrical monitoring (PEM) technology, numerical simulation model and the empirical formula method. The results show that the destruction does not occur simply layer-by-layer from the bottom up. Rather, the fractured areas appear first in soft layers above the goaf. With the advance of footage, the destruction gradually extends from soft layers to hard layers, and the WFFZ is formed when the fractured areas fit closely together. Also, the change process of the WFFZ shape is closely related to rock mass heterogeneity. In addition, the results of the comparison suggest that the RBF neural network model had more accuracy in predicting the height of the WFFZ than the numerical simulation model and empirical formula method.

Analysis of failure characteristics of grouting concretion body under the action of water-force coupling

Cement slurry is widely used in grouting reinforcement of coal mine floor. Under the action of water-force coupling, the floor of abandoned roadway reinforced by cement slurry is prone to damage. The failure characteristics of grouting concretion body under water-force coupling were studied by using RFPA software considering the heterogeneity of rock mass. The numerical simulation results show that the acoustic emission (AE) of numerical samples of the same strength with different lower boundary pressure decreases with the increase of lower boundary pressure, and the acoustic emission of numerical samples of the same lower boundary pressure with different strength increases with the increase of compressive strength. The lower the water pressure at the lower boundary is, the lower the softening degree of the sample is, and the sample is more prone to brittle fracture under external load. The numerical simulation results have important guiding significance for the grouting concretion body protection of coal mine floor in the future.

Probabilistic assessment of slope stability at ore mining with steep layers in deep open pits

Purpose. A methodology development for predicting the geomechanical situation when mining an ore deposit with steep-dipping layers, taking into account the uncertainty in determining the rock properties, which is a consequence of the rock mass heterogeneity. Methods. The assessment of the open-pit wall stability is based on a combination of numerical simulation of the rock stress-strain state (SSS) and probabilistic analysis. The finite element method is used to determine the changes in the SSS that occur at various stages of mining operations due to design changes in the overall open-pit slope angle. The elastic-plastic model of the medium and the Mohr-Coulomb failure criterion are implemented in the codes of the 3D finite element analysis program RS3 (Rocscience). Stochastic simulation is used to assess random risks associated with natural object state variations. Findings. The distribution of maximum shear strains, which localizes the real or potential sliding surfaces in the open-pit wall at various stages of ore mining, has been identified. Based on the Shear Strength Reduction procedure, the open-pit wall Strength Reduction Factor (SRF) has been determined. The probabilities of open-pit wall stability loss, as well as the decrease in the strength reduction factor below the standard level at all stages of the ore body mining, have been revealed. Originality. For the first time, for real mining-geological conditions of a deep ore open pit, the dependence of the strength reduction factor on the overall wall slope angle, which changes during mining of each steep layer, has been determined. For each stage of mining operations, for the first time, the probability of a decrease in the open-pit wall stability below the standard level has been determined based on stochastic simulation. Practical implications. The ratio between the open-pit contour characteristic (overall slope angle) and the probabilistic safety factor is the basis for practical solutions to ensure the efficiency and safety of mining at various stages of friable and hard overburden excavation, ore extraction, as well as for the subsequent optimization of the open-pit design contours.