Heterogeneous Primary Nucleation Research Articles

α-Synuclein Aggregation Is Triggered by Oligomeric Amyloid-β 42 via Heterogeneous Primary Nucleation.

An increasing number of cases where amyloids of different proteins are found in the same patient are being reported. This observation complicates diagnosis and clinical intervention. Amyloids of the amyloid-β peptide or the protein α-synuclein are traditionally considered hallmarks of Alzheimer's and Parkinson's diseases, respectively. However, the co-occurrence of amyloids of these proteins has also been reported in patients diagnosed with either disease. Here, we show that soluble species containing amyloid-β can induce the aggregation of α-synuclein. Fibrils formed under these conditions are solely composed of α-synuclein to which amyloid-β can be found associated but not as part of the core of the fibrils. Importantly, by global kinetic analysis, we found that the aggregation of α-synuclein under these conditions occurs via heterogeneous primary nucleation, triggered by soluble aggregates containing amyloid-β.

Green chiral separation of racemic mixture via crystallization induced deracemization process synergistically intensified by ultrasound and temperature cycling

Deracemization is a promising chiral resolution technique that combines racemization reaction with stereoselective crystallization for complete chiral symmetry breaking and has attracted much attention. However, the integration process of reaction-crystallization is rather complex and often requires long operation time with high initial solid enantiomer excess which greatly limits its wide application. Herein, we proposed a novel strategy that combines the use of both ultrasound and temperature cycles to accelerate the process of deracemization and thereby chiral separation. A chiral compound, N-acetyl-dl-leucine, was selected as a model drug for experimental validation. We found that either ultrasound or temperature cycle process was capable of accelerating the deracemization efficiency, nonetheless, the combination of the two methods leads to the antagonistic action, decreasing process efficiency and product chiral purity. Through the time-elapsed characterizations on enantiomeric purity of N-acetyl-l-leucine over the course of deracemization, we revealed that the ultrasound negatively impacted the process efficiency of chiral separation via promotion of primary heterogeneous nucleation during the cooling stage. Finally, we strategically designed a synergistic process intensification of crystallization-induced deracemization between temperature cycling and the periodic ultrasound that switches on only during the heating stage to achieve highly efficient separation of pure N-acetyl-l-leucine with theoretical 100% yield at extremely low initial solid ee%.

The Bacterial Amyloids Phenol Soluble Modulins from Staphylococcus aureus Catalyze Alpha-Synuclein Aggregation.

Aggregated α-synuclein (α-syn) is the main constituent of Lewy bodies, which are a pathological hallmark of Parkinson’s disease (PD). Environmental factors are thought to be potential triggers capable of initiating the aggregation of the otherwise monomeric α-syn. Braak’s seminal work redirected attention to the intestine and recent reports of dysbiosis have highlighted the potential causative role of the microbiome in the initiation of pathology of PD. Staphylococcus aureus is a bacterium carried by 30–70% of the general population. It has been shown to produce functional amyloids, called phenol soluble modulins (PSMαs). Here, we studied the kinetics of α-syn aggregation under quiescent conditions in the presence or absence of four different PSMα peptides and observed a remarkable shortening of the lag phase in their presence. Whereas pure α-syn monomer did not aggregate up to 450 h after initiation of the experiment in neither neutral nor mildly acidic buffer, the addition of different PSMα peptides resulted in an almost immediate increase in the Thioflavin T (ThT) fluorescence. Despite similar peptide sequences, the different PSMα peptides displayed distinct effects on the kinetics of α-syn aggregation. Kinetic analyses of the data suggest that all four peptides catalyze α-syn aggregation through heterogeneous primary nucleation. The immunogold electron microscopic analyses showed that the aggregates were fibrillar and composed of α-syn. In addition of the co-aggregated materials to a cell model expressing the A53T α-syn variant fused to GFP was found to catalyze α-syn aggregation and phosphorylation in the cells. Our results provide evidence of a potential trigger of synucleinopathies and could have implications for the prevention of the diseases.

The Aggregation Conditions Define Whether EGCG is an Inhibitor or Enhancer of α-Synuclein Amyloid Fibril Formation.

The amyloid fibril formation by -synuclein is a hallmark of various neurodegenerative disorders, most notably Parkinson’s disease. Epigallocatechin gallate (EGCG) has been reported to be an efficient inhibitor of amyloid formation by numerous proteins, among them -synuclein. Here, we show that this applies only to a small region of the relevant parameter space, in particular to solution conditions where EGCG readily oxidizes, and we find that the oxidation product is a much more potent inhibitor compared to the unmodified EGCG. In addition to its inhibitory effects, EGCG and its oxidation products can under some conditions even accelerate -synuclein amyloid fibril formation through facilitating its heterogeneous primary nucleation. Furthermore, we show through quantitative seeding experiments that, contrary to previous reports, EGCG is not able to re-model -synuclein amyloid fibrils into seeding-incompetent structures. Taken together, our results paint a complex picture of EGCG as a compound that can under some conditions inhibit the amyloid fibril formation of -synuclein, but the inhibitory action is not robust against various physiologically relevant changes in experimental conditions. Our results are important for the development of strategies to identify and characterize promising amyloid inhibitors.

Is Chemically Reactive Membrane Crystallization Faciliated by Heterogeneous Primary Nucleation? Comparison with Conventional Gas–Liquid Crystallization for Ammonium Bicarbonate Precipitation in a CO2–NH3–H2O System

In this study, membrane crystallization is compared to conventional gas–liquid crystallization for the precipitation of ammonium bicarbonate, to demonstrate the distinction in kinetic trajectory an...

Recovery and concentration of ammonia from return liquor to promote enhanced CO2 absorption and simultaneous ammonium bicarbonate crystallisation during biogas upgrading in a hollow fibre membrane contactor

In this study, thermal desorption was developed to separate and concentrate ammonia from return liquor, for use as a chemical absorbent in biogas upgrading, providing process intensification and the production of crystalline ammonium bicarbonate as the final reaction product. Applying modest temperature (50 °C) in thermal desorption suppressed water vapour pressure and increased selective transport for ammonia from return liquor (0.11MNH3) yielding a concentrated condensate (up to 1.7MNH3). Rectification was modelled through second-stage thermal processing, where higher initial ammonia concentration from the first stage increased mass transfer and delivered a saturated ammonia solution (6.4MNH3), which was sufficient to provide chemically enhanced CO2 separation and the simultaneous initiation of ammonium bicarbonate crystallisation, in a hollow fibre membrane contactor. Condensate recovered from return liquor exhibited a reduction in surface tension. We propose this is due to the stratification of surface active agents at the air-liquid interface during primary-stage thermal desorption which carried over into the condensate, ‘salting’ out CO2 and lowering the kinetic trajectory of absorption. However, crystal induction (the onset of nucleation) was comparable in both synthetic and thermally recovered condensates, indicating the thermodynamics of crystallisation to be unaffected by the recovered condensate. The membrane was evidenced to promote heterogeneous primary nucleation, and the reduction in the recovered condensate surface tension was shown to exacerbate nucleation rate, due to the reduction in activation energy. X-ray diffraction of the crystals formed, showed the product to be ammonium bicarbonate, demonstrating that thermal desorption eliminates cation competition (e.g. Ca2+) to guarantee the formation of the preferred crystalline reaction product. This study identifies an important synergy between thermal desorption and membrane contactor technology that delivers biogas upgrading, ammonia removal from wastewater and resource recovery in a complimentary process.

Anomalous Salt Dependence Reveals an Interplay of Attractive and Repulsive Electrostatic Interactions in α-synuclein Fibril Formation.

α-Synuclein (α-syn) is an intrinsically disordered protein with a highly asymmetric charge distribution, whose aggregation is linked to Parkinson's disease. The effect of ionic strength was investigated at mildly acidic pH (5.5) in the presence of catalytic surfaces in the form of α-syn seeds or anionic lipid vesicles using thioflavin T fluorescence measurements. Similar trends were observed with both surfaces: increasing ionic strength reduced the rate of α-syn aggregation although the surfaces as well as α-syn have a net negative charge at pH 5.5. This anomalous salt dependence implies that short-range attractive electrostatic interactions are critical for secondary nucleation as well as heterogeneous primary nucleation. Such interactions were confirmed in Monte Carlo simulations of α-syn monomers interacting with surface-grafted C-terminal tails, and found to be weakened in the presence of salt. Thus, nucleation of α-syn aggregation depends critically on an attractive electrostatic component that is screened by salt to the extent that it outweighs the screening of the long-range repulsion between negatively charged monomers and negative surfaces. Interactions between the positively charged N-termini of α-syn monomers on the one hand, and the negatively C-termini of α-syn on fibrils or vesicles surfaces on the other hand, are thus critical for nucleation.

Emerging role of primary heterogeneous nucleation in pharmaceutical crystallization.

Crystallization is an important and difficult to control unit operation in the pharmaceutical industry. Crystallization can control molecular (i.e., polymorphism) and particulate (i.e., particle size and crystal habit) properties of active pharmaceutical ingredient (API). Moreover, these molecular and particulate properties govern the manufacturability, stability, and biopharmaceutical performance of the API and drug product. Nucleation is a key step and primary heterogeneous nucleation is a common mode of nucleation during crystallization. Hence, it is important to understand the parameters affecting primary heterogeneous nucleation, to achieve desirable properties in crystalline APIs. Primary heterogeneous crystallization has usually been linked to the surface characteristics like topography and functionality of the heteronucleant. The review outlines recent findings in the primary heterogeneous crystallization with specific emphasis on its pharmaceutical applications including regulatory considerations. Molecular-level mechanisms governing heteronucleation and subsequent outcome in terms of molecular as well as particulate-level properties of API have also been discussed. Moreover, general guidance for the selection of heteronucleant has also been included. Heterogeneous crystallization is a promising tool for efficient crystallization of API having properties for optimal pharmaceutical performance.

Role of Surface Characteristics of Mannitol in Crystallization of Fenofibrate During Spray Drying

NanoCrySP™ is a novel spray-drying-based technology for the generation of nanocrystalline solid dispersions of active pharmaceutical ingredients embedded in the matrix of small molecule excipients. Active pharmaceutical ingredient first appears as an amorphous phase, which transforms to crystalline phase during its passage in the drying chamber. Mannitol acts as a crystallization inducer for the intermediate amorphous phase by primary heterogeneous nucleation. Heteronucleation is a surface-assisted phenomenon and surface characteristics of mannitol were hypothesized to play important role. This study investigates the role of surface characteristics of mannitol on crystallization kinetics of amorphous fenofibrate. Crystallization kinetics of amorphous fenofibrate was assessed on 2 surfaces of mannitol having different porosity, roughness, and polarity. Fenofibrate showed faster crystallization in the presence of rougher surface (tind < 1 min) compared with smooth surface (tind = 49.28 min). This was attributed to higher porosity (75%) and surface polarity (~1.25-fold) of rough surface as compared with smooth surface. Polar nature provided primitive sites for faster crystallization of amorphous fenofibrate. These findings can be utilized for generating crystalline solid dispersions using spray drying in the presence of mannitol. The crystalline solid dispersions can be used for the development of oral solid dosage forms.

Product characteristics in simultaneous crystallization of NaCl and CaSO4 from aqueous solution under different evaporation rates

Knowledge about simultaneous crystallization in evaporative processes for water reuse is important for the promotion of particles with desirable characteristics. In this work, simultaneous crystallization of sodium chloride and calcium sulfate hemihydrate (HH) from aqueous solutions in unseeded batch mode is addressed. Both the crystallization mechanisms and the resulting particle morphological features have been identified. NaCl particles are generated by heterogeneous primary nucleation in solution, followed by growth and NaCl agglomeration. Calcium sulfate hemihydrate (HH) particles are also formed by heterogeneous primary nucleation in solution followed by crystal growth. HH crystals agglomerate with NaCl in all particle size ranges. Product particles are thus agglomerates with multimodal population densities in submillimetric size ranges, with HH widely dispersed throughout the size span of the particulate product. In comparison with NaCl binary solutions, simultaneous crystallization promotes the formation of larger, less polydisperse NaCl particles. Low supersaturations (low evaporation rates) inhibit HH agglomeration with NaCl. The submillimetric sized particles formed during simultaneous crystallization of NaCl and HH indicate ease in solid-liquid downstream separation.

Influence of Mixing Intensity on Lysozyme Crystallization in a Meso Oscillatory Flow Reactor

The influence of mixing intensity on protein crystallization has been investigated for the first time in a meso oscillatory flow reactor (meso-OFR). For this, lysozyme crystallization was studied in batch at different oscillation amplitudes and frequencies. Turbidity was monitored over time to measure induction time and follow the crystallization process. Results suggest that the crystallization mechanism may be characterized by the occurrence of primary heterogeneous nucleation followed by attrition-induced secondary nucleation. Results also evidence the nonmonotonic dependence of both induction time and mean crystal size on mixing intensity. Indeed, results show that the two parameters decrease with increasing mixing intensity at Reo below 189, while for further increase of Reo both remain almost constant. Based on the literature, we suggest that such behavior may be explained by the influence of mixing intensity on protein clusters size distribution in solution. Further, induction time and mean crystal...

Long-term deep-supercooling of large-volume water and red cell suspensions via surface sealing with immiscible liquids

Supercooling of aqueous solutions is a fundamentally and practically important physical phenomenon with numerous applications in biopreservation and beyond. Under normal conditions, heterogeneous nucleation mechanisms critically prohibit the simultaneous long-term (> 1 week), large volume (> 1 ml), and low temperatures (< −10 °C) supercooling of aqueous solutions. Here, we report on the use of surface sealing of water by an oil phase to significantly diminish the primary heterogeneous nucleation at the water/air interface. We achieve deep supercooling (down to −20 °C) of large volumes of water (up to 100 ml) for long periods (up to 100 days) simultaneously via this approach. Since oils are mixtures of various hydrocarbons we also report on the use of pure alkanes and primary alcohols of various lengths to achieve the same. Furthermore, we demonstrate the utility of deep supercooling via preliminary studies on extended (100 days) preservation of human red blood cells.

Mechanistic Origin of the Combined Effect of Surfaces and Mechanical Agitation on Amyloid Formation.

Interactions between proteins and surfaces in combination with hydrodynamic flow and mechanical agitation can often trigger the conversion of soluble peptides and proteins into aggregates, including amyloid fibrils. Despite the extensive literature on the empirical effects of surfaces and mechanical forces on the formation of amyloids, the molecular details of the mechanisms underlying this behavior are still elusive. This limitation is, in part, due to the complex reaction network underlying the formation of amyloids, where several microscopic reactions of nucleation and growth can occur both at the interfaces and in bulk. In this work, we design a high-throughput assay based on nanoparticles and we apply a chemical kinetic platform to analyze the mechanisms underlying the effect of surfaces and mechanical forces on the formation of amyloid fibrils from human insulin under physiological conditions. By considering a variety of polymeric nanoparticles with different surface properties we explore a broad range of repulsive and attractive interactions between insulin and surfaces. Our analysis shows that hydrophobic interfaces induce the formation of amyloid fibrils by specifically promoting the primary heterogeneous nucleation rate. In contrast, mechanical forces accelerate the formation of amyloid fibrils by favoring mass transport and further amplify the number of fibrils by promoting fragmentation events. Thus, surfaces and agitation have a combined effect on the kinetics of protein aggregation observed at the macroscopic level but, individually, they each affect distinct microscopic reaction steps: the presence of interfaces generates primary nucleation events of fibril formation, which is then amplified by mechanical forces. These results suggest that the inhibition of surface-induced heterogeneous nucleation should be considered a primary target to suppress aggregation and explain why in many systems the simultaneous presence of surfaces and hydrodynamic flow enhances protein aggregation.

EVALUATION OF SODIUM CHLORIDE CRYSTALLIZATION IN MEMBRANE DISTILLATION CRYSTALLIZATION APPLIED TO WATER DESALINATION

Crystallization in a Direct Contact Membrane Distillation (DCMD) process was studied both theoretically and experimentally. A mathematical model was proposed in order to predict the transmembrane flux in DCMD. The model fitted well experimental data for the system NaCl-H2O from undersaturated to supersaturated conditions in a specially designed crystallization setup at a bench scale. It was found that higher transmembrane fluxes induce higher temperature and concentration polarizations, as well as higher supersaturation in the vicinity of the solution-vapor interface. In this region, the supersaturation ratio largely exceeded the metastable limit for NaCl crystallization for the whole range of transmembrane fluxes of 0.37 to 1.54 kg/ (m2 h), implying that heterogeneous primary nucleation occurred close to such interface either in solution or on the membrane surface. Solids formed in solution accounted for 14 to 36% of the total solids, whereas solid formed on the membrane surface (fouling) was responsible for 6 to 19%. The remaining solids deposited on other surfaces such as in pumps and pipe fittings. It was also discovered that, by increasing the supersaturation ratio, heterogeneous nucleation in solution increased and on the membrane surface decreased. Heterogeneous nuclei in solution grew in size both by a molecular mechanism and by agglomeration. Single crystals were cubic shaped with well-formed edges and dominant size of about 40 µm whereas agglomerates were about 240 µm in size. The approach developed here may be applied to understanding crystallization phenomena in Membrane Distillation Crystallization (MDC) processes of any scale.

Biomimetic apatite layer formation on a novel citrate starch scaffold suitable for bone tissue engineering applications

The formation of biomimetic bone‐like apatite layers throughout the biopolymer‐based hydrogel scaffold is an attractive approach in bone tissue engineering. Here, the starch scaffold was prepared using a combination of particulate leaching and freeze‐drying techniques. The fabricated structures were then modified by citric acid to investigate the formation of bone‐like apatite layer on the porous citrate‐based scaffold after soaking in simulated body fluid (SBF). The Fourier Transform Infrared (FTIR) spectra and X‐ray diffraction (XRD) patterns revealed that the B‐type carbonated apatite has successfully deposited on the scaffold after immersing in SBF for 28 days. Indeed, high chemical affinity of carboxyl group in citrate starch resulted in primary heterogeneous nucleation of apatitic calcium phosphate throughout the starch hydrogel. Moreover, the biological activity of MG63 osteoblast‐like cells cultured on the scaffold was assessed using indirect MTT assay and cell attachment experiment. The results indicated that the cells show significant biocompatibility and cell attachment.

NanoCrySP technology for generation of drug nanocrystals: translational aspects and business potential.

Drug nanocrystals have rapidly evolved into a mature drug delivery strategy in the last decade, with almost 16 products currently on the market. Several "top-down" technologies are available in the market for generation of nanocrystals. Despite several advantages, very few bottom-up technologies have been explored for commercial purpose. This short communication highlights a novel, bottom-up, spray drying based technology-NanoCrySP-to generate drug nanocrystals. Nanocrystals are generated in the presence of non-polymeric excipients that act as crystallization inducer for the drug. Excipients encourage crystallization of drug by plasticization, primary heterogeneous nucleation, and imparting physical barrier to crystal growth. Nanocrystals have shown significant improvement in dissolution and thereby oral bioavailability. NanoCrySP technology is protected through patents in India, the USA, and the European Union. NanoCrySP can be utilized for (i) pharmaceutical development of new chemical entities, (ii) differentiated products of existing molecules, and (iii) generic drug products. The aggregation of drug nanocrystals generated using NanoCrySP poses significant challenges in the nanocrystal-based product development. Addition of stabilizers either during spray drying or during dissolution has shown beneficial effects.

KHT cold stabilization: A scanning electron microscopy study of the formation of surface deposits on stainless steel in model wines

The incidence of yeast cells and wine polysaccharides and polyphenols in the formation of adherent KHT crystals on stainless steel surfaces during cold stabilization was investigated by scanning electron microscopy. Additives were responsible for differences in the deposit configuration, the crystal shape and size as well as in the KHT crystallization kinetics. Yeast cells act as heterogeneous primary nucleation germs for KHT crystal formation. Colloids from wines interacted with KHT crystal faces and affected growth. It was confirmed that polyphenols strongly inhibit the crystallization and result in small crystals with a unidimensional growth. In contrast, with polyphenols, cubic crystals were obtained when wine polysaccharides were associated with yeast cells.

In vitro apatite formation on nano-crystalline titania layer aligned parallel to Ti6Al4V alloy substrates with sub-millimeter gap.

Pure titanium substrates were chemically oxidized with H2O2 and subsequent thermally oxidized at 400°C in air to form anatase-type titania layer on their surface. The chemically and thermally oxidized titanium substrate (CHT) was aligned parallel to the counter specimen such as commercially pure titanium (cpTi), titanium alloy (Ti6Al4V) popularly used as implant materials or Al substrate with 0.3-mm gap. Then, they were soaked in Kokubo's simulated body fluid (SBF, pH 7.4, 36.5°C) for 7days. XRD and SEM analysis showed that the in vitro apatite-forming ability of the contact surface of the CHT specimen decreased in the order: cpTi>Ti6Al4V>Al. EDX and XPS surface analysis showed that aluminum species were present on the contact surface of the CHT specimen aligned parallel to the counter specimen such as Ti6Al4V and Al. This result indicated that Ti6Al4V or Al specimens released the aluminum species into the SBF under the spatial gap. The released aluminum species might be positively or negatively charged in the SBF and thus can interact with calcium or phosphate species as well as titania layer, causing the suppression of the primary heterogeneous nucleation and growth of apatite on the contact surface of the CHT specimen under the spatial gap. The diffusion and adsorption of aluminum species derived from the half-sized counter specimen under the spatial gap resulted in two dimensionally area-selective deposition of apatite particles on the contact surfaces of the CHT specimen.

Method to Study the Primary Nucleation for Solid Solution: Application to Uranium-Neodymium Oxalate Coprecipitation

Actinides co-precipitation is currently investigated in order to synthesize solid solutions of actinides mixed oxalates. This paper deals with the thermodynamic and kinetic study of the precipitation of uranium-neodymium oxalate system. Based on an analysis of the theories developed in the literature, a new expression for the determination of the supersaturation ratio for the solid solutions is presented. An experimental study of the nucleation kinetics was performed on the mixed uranium-neodymium oxalates. Homogeneous and heterogeneous primary nucleation laws are obtained using a specific stopped flow apparatus. The experimental results are consistent with the classical behaviour of nucleation phenomena. The values of the kinetic parameters for the solid solution point out that the formation of the uraniumneodymium mixed oxalates is kinetically favoured compared with the simple uranium and neodymium oxalates.

Acceleration of Apatite Nucleation on Parallel Aligned Ti-Substrates with Optimum Gaps by UV-Light Pre-Irradiation

A recently developed “GRAPE® technology” provides titanium or titanium alloy implants with spontaneous apatite-forming ability in vitro, which requires properly designed gaps and optimum heat treatment in air. In this study, pure titanium pieces were thermally oxidized in air and pre-irradiated by UV-light under different environmental conditions such as in air or in ultra-pure water before aligning pairs of specimens in the GRAPE® set-up, i.e., two pieces of titanium substrates were aligned parallel to each other with optimum gap width (spatial design). Then, they were soaked in Kokubo’s simulated body fluid (SBF, pH7.4, 36.5°C) for 1-2 days to clarify how the UV-light pre-irradiation affects the in vitro apatite nucleation on the substrates under the specific spatial design. UV-light pre-irradiation in water led to the deposition of a large number of apatite particles within 1 day, and showed apatite X-ray diffraction, although UV-light pre-irradiation in air and non-pretreated specimens gave the deposition of a few apatite particles and did not show any apatite X-ray diffraction. These results indicated that the rate of primary heterogeneous nucleation of apatite increased by UV-light pre-irradiation in ultra-pure water. TF-XRD patterns of the surface of the substrates thermally oxidized in air at 500°C showed the peak at 2θ = 27º assignable to the 110 diffraction of rutile phase of titanium dioxide (ICDD-JCPDS data #21-1276). Previous studies reported that the primary heterogeneous nucleation must be induced by Ti-OH groups on titanium oxide layer. Probably, the UV-light pre-irradiation in ultra-pure water can increase the number of Ti-OH groups on the surface, resulting in accelerated primary heterogeneous nucleation of apatite.