Heteroaryl Bromides Research Articles

C1 Functionalization of β-Carboline via Knochel-Hauser Base-Directed Metalation and Negishi Coupling.

The synthesis of C1-functionalized β-carbolines from N-Boc norharman is described. Substitution is realized by employing the Knochel-Hauser base (TMPMgCl·LiCl) followed by transmetalation with ZnCl2 and subsequent Negishi cross-coupling of the resulting organozinc species. A variety of aryl or heteroaryl bromides participated in this one-pot reaction sequence, allowing for rapid diversification of the β-carboline scaffold in moderate to excellent yields. The reaction protocol has been applied to the synthesis of natural alkaloids nitramarine, nitraridine, eudistomin U, and perlolyrine.

Palladium-Catalyzed α-Arylation of Cycloalkanones with Sterically Hindered Bromoazines under Neat Conditions

AbstractThe palladium-catalyzed cross-coupling of cycloalkanones with a range of heteroaryl bromides is described herein. The transformation proceeds best with third-generation tris-tBu-phosphine Pd pre-catalyst in neat cycloalkanones. Careful screening of the reaction conditions revealed K3PO4 as an effective weak and mild base thereby tolerating base-sensitive functional groups such as acetals or nitrogen protecting groups. Moderate to good yields were achieved for a series of 29 examples with various degrees of structural complexity. Importantly, these optimized conditions allow the α-(hetero)aryl cross-coupling of ortho-substituted (hetero)aryl bromide substrates with different cyclo­alkanones that typically failed to react efficiently under previously reported conditions.

Synthesis of Biheteroaryls by Pd-Catalyzed Homocoupling of Heteroaryl Bromides.

Symmetrical biheteroaryl compounds, such as bypyridines and bipyrazoles, are important ligands in transition-metal catalysis. They also serve as synthetic precursors of photo catalysts/sensitizers, bioactive agents, and energetic materials. To facilitate the concise synthesis of these useful structures, an efficient Pd-catalyzed homocoupling of heteroaryl bromides has been successfully established using the electron-rich and sterically hindered monophosphorus ligand BIDIME. The coupling protocol features a tandem Miyaura borylation/Suzuki coupling sequence and exhibits unprecedented tolerance of a wide range of heteroaryl bromides, providing a series of symmetrical biheteroaryls in moderate to good yields. Notably, the use of the corresponding polymeric ligand, PolyBIDIME, enabled the recycling of a palladium catalyst, demonstrating the potential of the homocoupling in practical applications.

Amine-Borane-Mediated, Nickel/Photoredox-Catalyzed Cross-Electrophile Coupling between Alkyl and Aryl Bromides.

Nickel/photoredox catalysis has emerged as a powerful platform for exploring nontraditional and challenging cross-couplings. Herein, a metallaphotoredox catalytic protocol has been developed on the basis of a tertiary amine-ligated boryl radical-induced halogen atom transfer process under blue-light irradiation. A wide variety of aryl and heteroaryl bromides featuring different functional groups and pharmaceutical moieties were facilely coupled to rapidly install C(sp3)-enriched aromatic scaffolds. The compatibility of Lewis base-ligated borane with nickel catalysis was well exemplified to extend the chemical space for Ni-catalyzed cross-electrophile coupling.

Synthesis of Hexafluoroisopropyl Aryl Ethers via Dual Photoredox/Nickel-Catalyzed C-O Coupling.

Herein we report a photoredox/nickel-catalyzed cross-coupling of aryl bromides with 1,1,1,3,3,3-hexafluoroisopropanol for the construction of hexafluoroisopropyl aryl ethers. The mild reaction conditions employed allow for the applicability of a wide range of aryl and heteroaryl bromides. Late-stage functionalization and preliminary mechanistic studies have been demonstrated.

Nickel-Catalyzed Enantioselective Carbonyl Addition of Aryl Chlorides and Bromides to Aldehydes.

The Ni-catalyzed enantioselective addition reaction of aryl halides to aldehydes was studied with cyanobis(oxazoline) as chiral ligands and Mn as reductant. Aryl and heteroaryl bromides reacted with phenyl aldehyde at room temperature to produce dibenzyl alcohols in 16-99 % yields with 53-92 % ees. Moreover, the coupling of phenyl chloride with a variety of aryl, heteroaryl and alkyl aldehydes was demonstrated in the presence of cyanobis(oxazoline)/Ni(II) at 60 °C in generally high yields with moderate enantioselectivities.

Synthesis of (Hetero)biaryls via Nickel Catalyzed Reductive Cross-Electrophile Coupling Between (Hetero)aryl Iodides and Bromides.

(Hetero)biaryls are fundamental building blocks in the pharmaceutical industry and rapid access to these scaffolds is imperative for the success of numerous medicinal chemistry campaigns. Herein, a highly general, mild, and chemoselective reductive cross-electrophile coupling between (hetero)aryl iodides and heteroaryl bromides is reported. By employing more reactive (hetero)aryl halides, a broad range of successful substrates (45 examples) were identified. The reaction was also found to be chemoselective for C(sp2)-C(sp2) bond formation between (hetero)aryl iodides and bromides over (hetero)aryl chlorides, which were generally inert under the described reaction conditions. The efficiency of the procedure is also further demonstrated in parallel synthesis library format, on gram scale, as well as in the formal synthesis of Ruxolitinib, a potent JAK inhibitor. As such, we anticipate this method will find widespread utility in the assembly of (hetero)biaryls for medicinal chemistry efforts.

Sulfone Electrophiles in Cross-Electrophile Coupling: Nickel-Catalyzed Difluoromethylation of Aryl Bromides.

Fluoroalkyl fragments have played a critical role in the design of pharmaceutical and agrochemical molecules in recent years due to the enhanced biological properties of fluorinated molecules compared to their non-fluorinated analogues. Despite the potential advantages conferred by incorporating a difluoromethyl group in organic compounds, industrial adoption of difluoromethylation methods lags behind fluorination and trifluoromethylation. This is due in part to challenges in applying common difluoromethyl sources towards industrial applications. We report here the nickel-catalyzed cross-electrophile coupling of (hetero)aryl bromides with difluoromethyl 2-pyridyl sulfone, a sustainably sourced, crystalline difluoromethylation reagent. The scope of this reaction is demonstrated with 24 examples (67 ± 16% average yield) including a diverse array of heteroaryl bromides and precursors to difluoromethyl-containing preclinical pharmaceuticals. This reaction can be applied to small-scale parallel synthesis and benchtop scale-up under mild conditions. As sulfone reagents are uncommon electrophiles in cross-electrophile coupling, the mechanism of this process was investigated. Studies confirmed the formation of •CF2H instead of difluorocarbene. A series of modified difluoromethyl sulfones revealed that sulfone reactivity does not correlate exclusively with reduction potential and that coordination of cations or nickel to the pyridyl group is essential to reactivity, setting out parameters for matching the reactivity of sulfones in cross-electrophile coupling.

Palladium-Catalyzed Amination of Aryl Halides with Aqueous Ammonia and Hydroxide Base Enabled by Ligand Development.

The conversion of aryl halides to primary arylamines with a convenient and inexpensive source of ammonia has been a long-standing synthetic challenge. Aqueous ammonia would be the most convenient and least expensive form of ammonia, but such a palladium-catalyzed amination reaction with a high concentration of water faces challenges concerning catalyst stability and competing hydroxylation, and palladium-catalyzed reactions with this practical reagent are rare. Further, most reactions with ammonia to form primary amines are conducted with tert-butoxide base, but reactions with ammonium hydroxide would contain hydroxide as base. Thus, ammonia surrogates, ammonia in organic solvents, and ammonium salts have been used under anhydrous conditions instead with varying levels of selectivity for the primary amine. We report the palladium-catalyzed amination of aryl and heteroaryl chlorides and bromides with aqueous ammonia and a hydroxide base to form the primary arylamine with high selectivity. The palladium catalyst containing a new dialkyl biheteroaryl phosphine ligand (KPhos) suppresses both the formation of aryl alcohol and diarylamine side products. Mechanistic studies with a soluble hydroxide base revealed turnover-limiting reductive elimination of the arylamine and an equilibrium between arylpalladium amido and hydroxo complexes prior to the turnover-limiting step.

Copper-Mediated Cyanodifluoromethylation of (Hetero)aryl Iodides and Activated (Hetero)aryl Bromides with TMSCF2CN.

Molecules bearing fluorine are increasingly prevalent in pharmaceuticals, agrochemicals, and functional materials. The cyanodifluoromethyl group is unique because its size is closer than that of any other substituted difluoromethyl group to the size of the trifluoromethyl group, but its electronic properties are distinct from those of the trifluoromethyl group. In addition, the presence of the cyano group provides synthetic entry to a wide range of substituted difluoromethyl groups. However, the synthesis of cyanodifluoromethyl compounds requires multiple steps, highly reactive reagents (such as DAST, NSFI, or IF5), or specialized starting materials (such as α,α-dichloroacetonitriles or α-mercaptoacetonitriles). Herein, we report a copper-mediated cyanodifluoromethylation of aryl and heteroaryl iodides and activated aryl and heteroaryl bromides with TMSCF2CN. This cyanodifluoromethylation tolerates an array of functional groups, is applicable to late-stage functionalization of complex molecules, yields analogues of FDA-approved pharmaceuticals and fine chemicals, and enables the synthesis of a range of complex molecules bearing a difluoromethylene unit by transformations of the electron-poor CN unit. Calculations of selected steps of the reaction mechanism by Density Functional Theory indicate that the barriers for both the oxidative addition of iodobenzene to [(DMF)CuCF2CN] and the reductive elimination of the fluoroalkyl product from the fluoroalkyl copper intermediate lie in between those of [(DMF)CuCF3] and [(DMF)CuCF2C(O)NMe2].

Catalytic 2-Ethylhexanoic Acid Promotes Mild Miyaura Borylations.

The Miyaura borylation of aryl and heteroaryl chlorides and bromides using a combination of potassium carbonate and 5 mol % 2-ethylhexanoic acid at 25 °C is reported. The in situ generation of a catalytic amount of potassium 2-ethylhexanoate under these conditions avoids the need for special handling of stoichiometric quantities of hygroscopic potassium 2-ethylhexanoate during the reaction setup as well as difficulties in removing the resulting carboxylic acid during product isolation.

Room-Temperature Copper-Catalyzed Etherification of Aryl Bromides.

We disclose the development of a Cu-catalyzed C-O coupling method utilizing a new N1,N2-diarylbenzene-1,2-diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8-based catalyst. Notably, the L8-derived catalyst exhibited enhanced activity when compared to the L4-based system previously disclosed for C-N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C-O coupling utilizing L8 ⋅ Cu involves rate-limiting alkoxide transmetallation, resulting in a mechanism of C-O bond formation that is distinct from previously described Pd-, Cu-, or Ni-based systems. This lower energy pathway leads to rapid C-O bond formation; a 7-fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C-O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu-catalyzed C-heteroatom bond-forming reactions.

Room‐Temperature Copper‐Catalyzed Etherification of Aryl Bromides

AbstractWe disclose the development of a Cu‐catalyzed C−O coupling method utilizing a new N1,N2‐diarylbenzene‐1,2‐diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8‐based catalyst. Notably, the L8‐derived catalyst exhibited enhanced activity when compared to the L4‐based system previously disclosed for C−N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C−O coupling utilizing L8 ⋅ Cu involves rate‐limiting alkoxide transmetallation, resulting in a mechanism of C−O bond formation that is distinct from previously described Pd‐, Cu‐, or Ni‐based systems. This lower energy pathway leads to rapid C−O bond formation; a 7‐fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C−O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu‐catalyzed C‐heteroatom bond‐forming reactions.

Palladium-catalyzed Cross-coupling of 2-Benzo[b]thiophene or 2- Benzo[b]furan Aluminum with Heteroaryl or Alkynyl Bromides for the Synthesis of 2-Hetroaryl or Alkynyl Benzo[b]thiophene or Benzo[b]furan Derivatives

Abstract: An alternative method for the synthesis of 2-heteroaryl or alkynyl benzo[b]thiophene or furan derivatives via direct palladium-catalyzed cross-coupling of 2-benzo[b]thiophene or furan aluminum with heteroaryl or alkynyl bromides, respectively, has been successfully developed. This case is remarkable as the same catalytic system could simultaneously produce either 2-substituted benzo[ b]thiophene or furan derivatives.

Nickel-Catalyzed Synthesis of Benzylamines from (Hetero)aryl Halides and Glycine-Derived N-Hydroxyphthalimide Esters

AbstractA nickel-catalyzed aminomethylation of aryl or heteroaryl iodides or bromides for the preparation of protected primary benzylamines is reported. This cross-electrophile reductive protocol engages carbamate-protected, glycine-derived N-hydroxyphthalimide (NHP) esters in an efficient decarboxylative cross-coupling in only two hours. The catalyst and NHP ester reagents are commercially available or can be synthesized in one step on a decagram scale with no chromatography.

α-Diimine-based conjugated microporous polymers as heterogeneous ligands for highly efficient palladium-catalyzed direct C–H arylations

α-Diimine palladium embedded conjugated microporous polymers (DIM-Pd-CMPs) as highly efficient heterogeneous catalysts for direct C–H arylations of heteroarenes with heteroaryl bromides.

Two-Chamber Aminocarbonylation of Aryl Bromides and Triflates Using Amino Acids as Nucleophiles.

A palladium(0)-catalyzed aminocarbonylation reaction employing molybdenum hexacarbonyl as a carbon monoxide precursor for the production of N-capped amino acids using aryl and heteroaryl bromides and triflates is reported. The carbon monoxide is formed ex situ through the use of a two-chamber system, where carbon monoxide generated in one chamber is free to diffuse over and be consumed in the other palladium-catalyzed reaction chamber. Using this method, two series of aryl bromides and aryl triflates were utilized to synthesize 21 N-capped amino acids in isolated yields between 40 and 91%.

Room-Temperature Cu-Catalyzed Amination of Aryl Bromides Enabled by DFT-Guided Ligand Design.

Ullmann-type C-N coupling reactions represent an important alternative to well-established Pd-catalyzed approaches due to the differing reactivity and the lower cost of Cu. While the design of anionic Cu ligands, particularly those by Ma, has enabled the coupling of various classes of aryl halides and alkyl amines, most methods require conditions that can limit their utility on complex substrates. Herein, we disclose the development of anionic N1,N2-diarylbenzene-1,2-diamine ligands that promote the Cu-catalyzed amination of aryl bromides under mild conditions. Guided by DFT calculations, these ligands were designed to (1) increase the electron density on Cu, thereby increasing the rate of oxidative addition of aryl bromides, and (2) stabilize the active anionic CuI complex via a π-interaction. Under optimized conditions, structurally diverse aryl and heteroaryl bromides and a broad range of alkyl amine nucleophiles, including pharmaceuticals bearing multiple functional groups, were efficiently coupled at room temperature. Combined computational and experimental studies support a mechanism of C-N bond formation that follows a catalytic cycle akin to the well-explored Pd-catalyzed variants. Modification of the ligand structure to include a naphthyl residue resulted in a lower energy barrier to oxidative addition, providing a 30-fold rate increase relative to what is seen with other ligands. Collectively, these results establish a new class of anionic ligands for Cu-catalyzed C-N couplings, which we anticipate may be extended to other Cu-catalyzed C-heteroatom and C-C bond-forming reactions.

Microwave Irradiated, Sodium Aluminate Supported and Zinc Catalyzed Suzuki-Miyaura Cross-Coupling Reaction on Fused Tricyclic Oxa-Aza-Quinolone: A Green Protocol

Alternative synthesis methods are need of the hour to provide easy protocol for synthesizing biologically active heterocyclic compounds. In this connection, this paper describes the development of a concise, convergent protocol for diversely substituted Suzuki–Miyaura cross-coupling reactions of heteroaryl bromides and boronic acids under microwave irradiation using Sodium aluminate (NaAlO2) as a solid support as well as base. According to my knowledge, this is the first report of the strategy that involves the use of zinc as a catalyst on fused tricyclic di-halo quinolones in a solvent-free condition using simple microwave irradiation. Earlier research from the same laboratory established a solid support assisted Suzuki–Miyaura cross-coupling reaction for forming C–C bonds under the influence of microwave irradiation. Therefore, sodium aluminate (NaAlO2) was attempted as a base and solid support instead of traditional mineral bases. Moreover, zinc was used as a catalyst replacing palladium. The new method is unique and effective due to its energy economy, procedural simplicity, and general applicability. Moreover, the use of Sodium aluminate (NaAlO2) is expected to extend this green-protocol and atom-friendly chemistry for the synthesis of varied heterocyclic compounds of interest.

Challenging cross couplings, in water, aided by in situ iodination of (hetero)aromatic bromides.

Palladium-catalyzed reactions that involve functionalized substrates are oftentimes problematic. Those involving aryl or heteroaryl bromides that are either resistant to, or inefficient in such couplings present challenges that are difficult to overcome and may require development of an entirely new route, or worse, no opportunity to install the desired group using a standard coupling strategy. In this report, we describe a solution that allows for the in situ conversion of such bromo educts to transient iodide derivatives that can be made and used under environmentally responsible conditions, for subsequent reactions to highly functionalized, complex targets.