Helical Precessing Vortex Core Research Articles

A draft tube to improve mixing in swirling flow-based solid–liquid mixing reactors

The Swirl Flow Reactor (SFR) is a recently proposed specially designed reactor to address challenges of solid–liquid mixing for high-temperature and high-pressure processes. Previous research has shown that the mixing homogeneity of the SFR is not yet optimal and has still potential for improvement. To enhance the homogeneity of the SFR and to optimize the utilization of the previously identified Precessing Vortex Core at the nozzle, an improvement is proposed by the inclusion of a draft tube in the reactor center. Computational Fluid Dynamics is used to study the flow structure, particle distribution, and large-scale coherent structures in the SFR. The improved SFR has been validated for its more homogeneous mixing, where the homogeneity is improved from 0.945 for the original reactor to 0.991 in the new proposed design. Also, the influence of the draft tube on the fluctuating velocities and turbulence within the improved SFR has been indicated. In addition, Spectral Proper Orthogonal Decomposition (SPOD) is used to identify and reconstruct the coherent structures in the reactor. A flattened double-layer helical precessing vortex core (PVC) and its second-order harmonic at frequencies of 35.8 Hz and 71 Hz have been identified, which introduce extra large scale mixing near the nozzle of the reactor.

Impact of Hydrogen Addition on the Thermoacoustic Instability and Precessing Vortex Core Dynamics in a CH4/H2/Air Technically Premixed Combustor

Abstract We study the impact of H2 enrichment on the unsteady flow dynamics and thermoacoustic instability in the prediction and control of instabilities in industrial turbines (PRECCINSTA) swirl combustor. The experiments were performed at atmospheric conditions with H2/CH4 fuel mixtures at a global equivalence ratio of 0.65 and a constant thermal power of 20 kW. We analyze data with three fuel compositions: 0%, 20%, and 50% H2 in two operating modes, premixed (PM) and technically premixed (TPM). A new multiresolution modal decomposition method, using a combination of wavelet transforms and proper orthogonal decomposition (WPOD) is performed on time resolved flow velocity and OH planar laser induced fluorescence (OH planar laser induced fluorescence (OH-PLIF)) measurements. Thermoacoustic oscillations are observed in the TPM operating mode alone, indicating that the primary heat release driving mechanism is due to fuel-air ratio oscillations. WPOD results for the 0% H2 TPM case reveal intermittent helical precessing vortex core (PVC) oscillations along with axisymmetric hydrodynamic flow oscillations due to the thermoacoustic oscillations. These oscillations cause local flame extinction near the nozzle centerbody resulting in liftoff. A PVC then develops in the flow and enables intermittent flame reattachment. In the 0% H2 premixed case, the flame remains lifted off the centerbody despite the presence of PVC oscillations. H2 enrichment results in the suppression of flame liftoff and the PVC in both operating modes. We show from flow strain rate statistics and extinction strain rate calculations that the increase of the latter with H2 addition, allows the flame to stabilize in the region near the centerbody where the pure CH4 cases show lift off.

Enhancing effect of an open pipe exit on the precessing vortex core occurring in confined swirling flows

This paper investigates the effect of an open pipe exit on the dynamic behaviour of the helical precessing vortex core (PVC) occurring in a confined swirling flow after vortex breakdown. This is achieved by carrying out extensive particle image velocimetry and dynamic pressure measurements downstream of an air swirling flow generator in two pipes configurations at two values of swirl number $$S=0.7$$ and $$S=1.1$$ . The first pipe configuration features a diffuser followed by a straight pipe and an open exit. In the second configuration, the open exit is placed closer to the outlet of the swirl generator by removing the straight part. In both configurations, the PVC structural parameters are properly determined by phase-averaging of the instantaneous velocity fields. In the first configuration, a sudden change in the pitch of the helical vortex is observed at both swirl number values downstream of the connection between the diffuser and the straight part. Beyond this transition, the vortex trajectory starts widening as it is getting closer to the open exit of the pipe. The results in the second configuration confirm this enhancing effect of the open exit on the PVC: at both swirl numbers, the vortex trajectory is strongly widened and its radius continuously increases from the swirl generator outlet to the pipe exit, resulting in an increase in the Strouhal number and pressure fluctuations amplitude by 20 $$\%$$ and a factor up to 9, respectively, compared with the first configuration. Finally, based on a dimensional analysis, a linear relation between two dimensionless parameters including the vortex parameters and the pressure fluctuations amplitude is derived and supported by the data obtained in both pipe configurations.

Coupled interactions of a helical precessing vortex core and the central recirculation bubble in a swirl flame at elevated power density

The PRECCINSTA GTMC was studied at elevated pressure and power density with 6 kHz stereoscopic particle image velocimetry (SPIV), OH* chemiluminescence (CL), and 100 kHz dynamic pressure measurements. This technically premixed, swirl stabilized flame exhibited self-excited thermoacoustic oscillations with limit-cycle behavior. A helical precessing vortex core (PVC) was detected within the inner shear layer, between the central recirculation bubble (CRB) and the reactant jets. The PVC was found to be the delineating flow feature for combustion dynamics even at elevated pressure. Sparse dynamic mode decomposition (DMD) of the velocity fields deconvolved the dynamics into a thermoacoustic and PVC mode. The precession of the PVC was at a non-harmonic frequency to the thermoacoustic oscillations, and at least twice that of findings at atmospheric conditions. Nevertheless, the continuous and persistent structure of the PVC allows it promote unsteady heat release to sustain the thermoacoustic cycle. The three dimensional structure of the reactant jets, central recirculation bubble, and PVC was reconstructed by double phase conditioning the reconstructed velocity field. The surface of the CRB was observed to transition between asymmetric and symmetric states depending on the thermoacoustic phase. Analysis of the swirling strength values on the CRB surface indicates the interaction strength between the hydrodynamic structures of the PVC and CRB. When this coupling is large, the heat release determined by the mean OH*-CL intensity is maximum. These findings indicate a critical role of the PVC and CRB interaction on combustion in unstable swirl flames at conditions closer to those found in a modern gas turbine engine.

The role of strain rate, local extinction, and hydrodynamic instability on transition between attached and lifted swirl flames

The coupling between fluid strain rate, local flame extinction, hydrodynamic instability, and flame lift-off was studied in premixed swirl flames using multi-kHz repetition-rate OH* chemiluminescence (CL), OH planar laser induced fluorescence (PLIF), and stereoscopic particle image velocimetry (S-PIV). Over 50 different combinations of fuel composition (CH4/H2 ratio), equivalence ratio, and reactant preheat temperature were studied, allowing systematic variation of the reactant-to-product density ratio, laminar flame speed, and Lewis number. Depending on the test conditions, the flame could either be stably attached to the nozzle, stably lifted, or intermittently transitioning between attached and lifted states. Transition between stabilization states was linked with the transition between convective instability and absolute instability at the flame base; formation of an m=1 (m denotes the azimuthal wavenumber) globally unstable wave was associated with the lifted flame, which was manifested by a helical precessing vortex core (PVC). The minimum bulk velocity at which the flame was stably lifted was linearly correlated with the laminar flame extinction strain rate, while none of the other commonly reported key parameters governing hydrodynamic instability was able to collapse the data alone. Hence, lift-off was associated with a relatively constant Damköhler number based on the bulk fluid strain rate and extinction strain rate. The roles of local strain and extinction on the transition process were further elucidated by the cases with intermittent lift-off/reattachment. The probability of the flame being in the lifted state was roughly linearly correlated with the degree of local extinction at the flame base while the flame was still in the attached state. Moreover, this probability also was linearly related to the ratio of fluid-dynamic strain rate to extinction strain rate, but not the fluid-dynamic strain rate itself. These results demonstrate the importance of predicting extinction and hydrodynamic stability for predicting the attachment state of swirl flames.

Detached Eddy Simulation of High Turbulent Swirling Reacting Flow in a Premixed Model Burner

ABSTRACTDouble helical precessing vortex core (PVC) and its interaction with premixed propane flame in a swirl-stabilized burner is studied numerically. The model burner is operated under atmospheric pressure, swirl number Sn = 1.05 and equivalence ratio Φ = 0.5. Turbulence-chemistry interaction is treated using detached eddy simulation (DES) turbulence model, and finite-rate/eddy dissipation model (FR/EDM) in combination with a 3-step reduced mechanism. The flow field is well captured by DES and the premixed flame is well reproduced by FR/EDM. Dominant strong vortices are detected in the shear layer of the inner recirculation zone, and secondary outer vortices are found in the combustion chamber corners. Temperature and reaction zone maps reveal that the flame is mainly stabilized in the inner shear layer. Q-criterion is used to visualize the 3D behavior of the flow. It is found that the unsteady flow contains a large-scale coherent PVC with double structure. In addition, a co-rotating large-scale secondary outer vortex rotates around the PVC. The characteristics of the double structure PVC are studied by analyzing its slope and strength, as well as the wavelength of the vortex. The mechanisms of interaction between the double PVC and flame are clarified over slices perpendicular to the vortex axis of the PVC. The analysis shows that across the vortex, a high velocity gradient occurs and no flame is identified in the vortex core region. A bit far of the vortex core, the flame is found to be strongly affected by the PVC. The flame front is highly curved, wrinkled, and rolled up around the vortex. In general, the double PVC is found to play an essential role in the stabilization of the premixed swirled flame.

5 kHz thermometry in a swirl-stabilized gas turbine model combustor using chirped probe pulse femtosecond CARS. Part 2. Analysis of swirl flame dynamics

We have performed a detailed analysis of the temperature field in a turbulent swirl flame operating with a self-excited thermo-acoustic instability. The temperature field was measured using 5 kHz chirped-probe-pulse (CPP) femtosecond (fs) coherent anti-Stokes Raman scattering (CARS). The measurements are described in detail in the part 1 companion article. In this paper, part 2, a detailed analysis of the time-resolved temperature measurements and simultaneous pressure measurements is performed to provide insight into the dynamics and structure of the swirl-stabilized flame. This work is the first to capture the dynamics of the flame, flow, and coupled flow-flame processes using high-fidelity, spatially- and temporally-resolved thermometry in a flame of practical relevance. The time-averaged contour plot of the temperature field indicates that the flame is very flat and stabilizes approximately 10 mm downstream of the burner face. In this region, there are very significant temperature fluctuations indicating a very high level of unsteadiness. The temperature probability distribution functions (PDFs) are clearly bimodal in this region near the injector face. A Fourier analysis of the temperature time series revealed multiple coherent oscillatory modes. The strongest oscillation was found to be coherent and in-phase with an acoustic resonance at 314 Hz, as expected from the Rayleigh criteria for the unstable flame. An analysis of the phase-conditioned average temperature fields clearly shows an axial pumping of low-temperature reactants, which are consumed after a convective delay and result in a spike in the global heat-release rate. Continued analysis also revealed a 438 Hz oscillation that was found to correspond with the dynamics of convective transport by a helical precessing vortex core (PVC). The structure of the PVC, and its interaction with the flame, were studied based on the presence of this characteristic frequency in the power spectral densities computed throughout the flow. The precision and time-resolution of the CPP fsCARS measurements was also sufficient to enable computation of the integral time-scales as well as the PDFs of the temporal temperature gradients. A sample of state space trajectories were used to provide insight into the nature of coupling between the narrowband acoustic resonance and the broadband spectrum of turbulent flame processes.

Coupled dynamics of lift-off and precessing vortex core formation in swirl flames

The lift-off mechanism of swirl stabilized premixed flames was investigated using high repetition rate OH planar laser induced fluorescence (PLIF), particle image velocimetry (PIV), and OH* chemiluminescence. At steady operating conditions, the studied flames stochastically transitioned between attached and lifted configurations, with an increasing percentage of time spent in the detached state with increasing velocity. Neither the percentage of time spent in the detached state nor the final detachment conditions were predicted by the Damköhler number. The lift-off process involved several coupled phenomena, namely local flame extinction near the flame base, development of a helical precessing vortex core (PVC), and eventual total extinction of the flame base. Wavelet analysis demonstrated the correspondence between the flame lift-off height and the strength of the PVC. Furthermore, it showed that the initial local extinction preceded the PVC formation. Hence, the lift-off mechanism involved a stochastic local extinction event near the flame base altering the combustor density field and promoting formation of the PVC. The PVC increased the strain-rate on the flame base, which eventually led to total detachment.

Structure and Dynamics of Premixed Swirl Flames at Elevated Power Density

The Turbomeca gas turbine model combustor was studied to understand the effect of increased thermal power density on the structure and dynamics of premixed swirl flames. The burner was operated under two flame conditions: one stable, and one with self-excited thermoacoustic oscillations. Simultaneous measurements of scalar and three-component velocity fields were acquired at 3 and 6 kHz frequencies. Nonreacting flow measurements were used to approximate the spatial and temporal resolution with respect to the scales of the incoming flow. Time-resolved velocimetry revealed the presence of periodic fluctuations in both flames, occurring at shifted frequencies that did not correspond to a resonant acoustic mode or any corresponding harmonics. Proper orthogonal decomposition analysis revealed stably forced inner shear-layer oscillations that periodically formed and ejected symmetric vortex pairs under stable flame operation. The unstable flame was found to exhibit a single spatiotemporally evolving flow structure consistent with a helical precessing vortex core. A reconstructed time series elucidated the interactions of the reactant jets, the precessing vortex core, and the central recirculation bubble over a thermoacoustic cycle. This coupled interaction, and the resultant modulation of transport within the inner shear layer, were identified as a mechanism by which the precessing vortex core was linked to elevated power density flame dynamics.

Study of the mechanisms for flame stabilization in gas turbine model combustors using kHz laser diagnostics

An image-processing routine was developed to autonomously identify and statistically characterize flame-kernel events, wherein OH (from a planar laser-induced fluorescence, PLIF, measurement) appears in the probe region away from the contiguous OH layer. This routine was applied to datasets from two gas turbine model combustors that consist of thousands of joint OH-velocity images from kHz framerate OH-PLIF and particle image velocimetry (PIV). Phase sorting of the kernel centroids with respect to the dominant fluid-dynamic structure of the combustors (a helical precessing vortex core, PVC) indicates through-plane transport of reacting fluid best explains their sudden appearance in the PLIF images. The concentration of flame-kernel events around the periphery of the mean location of the PVC indicates they are likely the result of wrinkling and/or breakup of the primary flame sheet associated with the passage of the PVC as it circumscribes the burner centerline. The prevailing through-plane velocity of the swirling flow-field transports these fragments into the imaging plane of the OH-PLIF system. The lack of flame-kernel events near the center of the PVC (in which there is lower strain and longer fluid-dynamic residence times) indicates that auto-ignition is not a likely explanation for these flame kernels in a majority of cases. The lack of flame-kernel centroid variation in one flame in which there is no PVC further supports this explanation.

Experimental study of vortex-flame interaction in a gas turbine model combustor

The interaction of a helical precessing vortex core (PVC) with turbulent swirl flames in a gas turbine model combustor is studied experimentally. The combustor is operated with air and methane at atmospheric pressure and thermal powers from 10 to 35kW. The flow field is measured using particle image velocimetry (PIV), and the dominant unsteady vortex structures are determined using proper orthogonal decomposition. For all operating conditions, a PVC is detected in the shear layer of the inner recirculation zone (IRZ). In addition, a co-rotating helical vortex in the outer shear layer (OSL) and a central vortex originating in the exhaust tube are found. OH chemiluminescence (CL) images show that the flames are mainly stabilized in the inner shear layer (ISL), where also the PVC is located. Phase-averaged images of OH-CL show that for all conditions, a major part of heat release takes place in a helical zone that is coupled to the PVC. The mechanisms of the interaction between PVC and flame are then studied for the case P=10kW using simultaneous PIV and OH-PLIF measurements with a repetition rate of 5kHz. The measurements show that the PVC causes a regular sequence of flame roll-up, mixing of burned and unburned gas, and subsequent ignition of the mixture in the ISL. These effects are directly linked to the periodic vortex motions. A phase-averaged analysis of the flow field further shows that the PVC induces an unsteady lower stagnation point that is not present in the average flow field. The motion of the stagnation point is linked to the periodic precession of the PVC. Near this point burned and unburned gas collide frontally and a significant amount of heat release takes place. The flame dynamics near this point is also coupled to the PVC. In this way, a part of the reaction zone is periodically drawn from the stagnation point into the ISL, and thus serves as an ignition source for the reactions in this layer. In total, the effects in the ISL and at the stagnation point showed that the PVC plays an essential role in the stabilization mechanism of the turbulent swirl flames. In contrast to the PVC, the vortices in the OSL and near the exhaust tube have no direct effect on the flame since they are located outside the flame zone.

High-speed laser diagnostics for the study of flame dynamics in a lean premixed gas turbine model combustor

A series of measurements was taken on two technically premixed, swirl-stabilized methane-air flames (at overall equivalence ratios of ϕ = 0.73 and 0.83) in an optically accessible gas turbine model combustor. The primary diagnostics used were combined planar laser-induced fluorescence of the OH radical and stereoscopic particle image velocimetry (PIV) with simultaneous repetition rates of 10 kHz and a measurement duration of 0.8 s. Also measured were acoustic pulsations and OH chemiluminescence. Analysis revealed strong local periodicity in the thermoacoustically self-excited (or ‘noisy’) flame (ϕ = 0.73) in the regions of the flow corresponding to the inner shear layer and the jet-inflow. This periodicity appears to be the result of a helical precessing vortex core (PVC) present in that region of the combustor. The PVC has a precession frequency double (at 570 Hz) that of the thermo-acoustic pulsation (at 288 Hz). A comparison of the various data sets and analysis techniques applied to each flame suggests a strong coupling between the PVC and the thermo-acoustic pulsation in the noisy flame. Measurements of the stable (‘quiet’) flame (ϕ = 0.83) revealed a global fluctuation in both velocity and heat-release around 364 Hz, but no clear evidence of a PVC.

Flow–flame interactions causing acoustically coupled heat release fluctuations in a thermo-acoustically unstable gas turbine model combustor

A detailed analysis of the flow–flame interactions associated with acoustically coupled heat-release rate fluctuations was performed for a 10 kW, CH 4/air, swirl stabilized flame in a gas turbine model combustor exhibiting self-excited thermo-acoustic oscillations at 308 Hz. High-speed stereoscopic particle image velocimetry, OH planar laser induced fluorescence, and OH∗ chemiluminescence measurements were performed at a sustained repetition rate of 5 kHz, which was sufficient to resolve the relevant combustor dynamics. Using spatio-temporal proper orthogonal decomposition, it was found that the flow-field contained several simultaneous periodic motions: the reactant flux into the combustion chamber periodically oscillated at the thermo-acoustic frequency (308 Hz), a helical precessing vortex core (PVC) circumscribed the burner nozzle at 515 Hz, and the PVC underwent axial contraction and extension at the thermo-acoustic frequency. The global heat release rate fluctuated at the thermo-acoustic frequency, while the heat release centroid circumscribed the combustor at the difference between the thermo-acoustic and PVC frequencies. Hence, the three-dimensional location of the heat release fluctuations depended on the interaction of the PVC with the flame surface. This motivated the compilation of doubly phase resolved statistics based on the phase of both the acoustic and PVC cycles, which showed highly repeatable periodic flow–flame configurations. These include flames stabilized between the inflow and inner recirculation zone, large-scale flame wrap-up by the PVC, radial deflection of the inflow by the PVC, and combustion in the outer recirculation zones. Large oscillations in the flame surface area were observed at the thermo-accoustic frequency that significantly affected the total heat-release oscillations. By filtering the instantaneous reaction layers at different scales, the importance of the various flow–flame interactions affecting the flame area was determined. The greatest contributor was large-scale elongation of the reaction layers associated with the fluctuating reactant flow rate, which accounted for approximately 50% of the fluctuations. The remaining 50% was distributed between fine scale stochastic corrugation and large-scale corrugation due to the PVC.