Treatment of paint industry wastewater is challenging due to the presence of interfering ions, tertiary organics and radical species beyond acceptable levels. Further, the synthetic nature of adsorbent poses a risk in post-adsorption waste disposal due to hightened chances of environmental damage or toxicity. Therefore, this reported study focuses on the development of an ecofriendly heterogeneous composite by hydrothermal process using Iron-terephthalic acid (BDC), Metal-organic framework (MOF), and Molybdenum disulphide (MoS2)-together named Fe(BDC)-MoS2. This composite was tested for adsorption of Cr(VI) available in paint industry effluent wastewater (PW). The characterization of the Fe(BDC)-MoS2 using SEM, XRD, XPS, FTIR, revealed resilient formation of the composite. The maximum adsorption capacity (qmax) for Cr(VI) was 116.36 mg/g at 1.0 g/L Fe(BDC)-MoS2 dose at pH 5.13. Fe(BDC)-MoS2 readily adsorbed Cr(VI) from PW with ∼ 99.99 % effecieny. Significant reduction in the co-existing cations (e.g., Ni2+, Mn3+, Al3+, Cu2+, Co2+, Pb2+, and Zn2+) and anions (e.g. Chloride, Sulfate, and Nitrate) was also observed. The reusability study demonstrated a drop in adsorption efficiency by about 25 % after 4 consecutive cycles. The toxicity study on the human cervical epithelial (HeLa) cells at 50 μg/m Fe(BDC)-MoS2 dose showed cell viability of 95, while at 250 μg/Ml, it was 26.5 %. Overall, this study demonstrated Fe(BDC)-MoS2 as an ecofriendly and viable adsorbent for treating industrial wastewater.
Read full abstract