Recently, a vortex-based feedback fluidic oscillator has been proposed as an alternative to conventional feedback fluidic oscillators. This study aimed to compare the heat transfer performance of a newly designed fluidic oscillator with that of conventional feedback fluidic oscillators with and without an output diffuser using phosphor thermometry. To obtain the instantaneous temperature field in a wide range of high temperatures, a lifetime-based method was employed in two-dimensional phosphor thermography, with Mg4FGeO6: Mn serving as the sensor material and being excited by a UV-LED. A high-speed camera was used to capture images of the hot plate at 4,000 fps. The calibration test was conducted in the temperature range of 25–325 ˚C, and the results were compared with data from thermocouples. The study investigated the impact of the mass flow rate and throat-to-plate distance ratio of three fluidic oscillators to obtain the optimum Nusselt number. The results demonstrated that the newly designed fluidic oscillator exhibited significantly superior cooling effects in comparison to other types of fluidic oscillators. At the lowest ratio of the throat-to-wall distance to the outlet throat height (Z/D = 4.5) and a flow rate of 100 Lpm, the vortex-based fluidic oscillator demonstrated 78 % and 45 % higher heat transfer rates compared to the conventional oscillator with and without an external diffuser, respectively. Furthermore, the newly designed oscillator was more sensitive to the mass flow rate and throat-to-plate distance ratio than the other oscillators.