Heavy Shell Research Articles

Egg Quality Traits of Nigerian Indigenous Chickens Reared Under Scavenging and Improved Feeding Condition in Relation to Exotic Chickens Eggs

This study was aimed at assessing the egg quality traits of Nigerian indigenous chickens raised under scavenging and improved feeding conditions in relation to exotic chicken’s eggs. The study was conducted in Sam Tee farm Nukai Jalingo, Nigeria. The indigenous breed pullets were sourced from villages in Ardo Kola, Lau and Zing L.G.A. The birds were grouped into three treatments Viz: indigenous breed under improved feeding and scavenging conditions and the exotic breed. The indigenous breed pullets under improved feeding condition were placed on grower’s diet and gradually replaced with a commercially prepared layers’ mash. A total of 336 eggs from the three groups were examined. Eggs weight, length, width, shell thickness and yolk width were measured. Shell ratio, surface area and Haugh unit were calculated. Data were analyzed using ANOVA and correlation analysis. There were significant variations in egg weight, egg length and shell thickness between the indigenous and the exotic breed. The indigenous breed reared under improved feeding condition had the longest egg, largest surface area, thicker and heavier shell. Egg weight and surface area have significant positive correlations. In conclusion, Indigenous chickens' performance on some egg quality traits can be enhanced with judicious feeding and management.

Sclerochronology of the large scallops Gigantopecten latissimus and Pecten jacobaeus in a Pliocene warmer Mediterranean Sea

Here we apply a sclerochronological approach to reconstruct the life-history of two stenohaline bivalves of the family Pectinidae, Gigantopecten latissimus and Pecten jacobaeus from the Pliocene of Italy. The specimens come from the locality of Torrita di Siena (Siena-Radicofani Basin, Tuscany), dated to the late Zanclean-Piacenzian with nannoplankton biostratigraphy and Sr-isotope stratigraphy. After measuring the width of micro-growth increments and verifying that the shells were not diagenetically altered, we sampled them at high resolution for carbon and oxygen stable isotopes. δ13C and δ18O shell values allowed to distinguish between specimens that lived above or below the thermocline. Those influenced by surface waters indicate temperatures (for δ18Oseawater = 1.5‰) with winter minima of 16–18 °C and summer values up to 28–29 °C, close to present temperature conditions in the tropical west-African climate belt. In line with this, we found that the two species had similar seasonal growth patterns, with faster growth during colder months and summer slowdown, a typical adaptation of bivalves of tropical affinity suffering from summer temperature extremes. Despite this similar adaptation, G. latissimus, with large and heavy shells (length up to 30 cm) became extinct around 3.0 Ma, while the smaller P. jacobaeus survived Plio-Pleistocene cooling. Different growth rates between the two species and, therefore, different metabolic costs, might explain such differential response, together with differences in reproduction strategies. Habitat loss and fragmentation, due to the decrease of shelf margins and organogenic substrates caused by cooling and sea level fall, are abiotic factors that could have also contributed to the extinction of G. latissimus. P. jacobaeus adaptation to live across a larger bathymetric range, which indicates the ability to thrive in a wider range of temperatures, most likely played a role in its survival. Further studies, including more specimens across multiple localities, will help verifying these hypotheses.

Hefting Heavy Shells: Sustenance Demands Caused by Various Abodes of the Hermit Crab Pagurus granosimanus

Marine hermit crabs inhabiting different species of shells in the rocky intertidal may receive varied benefits and costs. Thick shell walls, sculpture, and certain silhouettes may increase protection against crushing predators and waves, but also the energy cost for bearing such a shell. To determine the relative energy demands on Pagurus granosimanus supporting one of three different species of shells commonly inhabited in nature, we measured the consumption of food by free-roaming, size-matched individuals after four days of food deprivation in the laboratory. Surprisingly, while all hermit crabs consumed a significant amount of food, that amount did not differ significantly across the types of shells inhabited, despite the significantly heavier weight of one type of shell (>150% of each of the other two species), and markedly different shell silhouettes. Whether our results were due to the inherent abilities of arthropods to support proportionally immense weights (physiology), reduced movements by animals in heavier shells (plastic behavior), or the way the hermit crabs bear the burden of the shell requires further investigation. Regardless, our results suggest that individuals of P. granosimanus that inhabit heavier shells that likely provide increased protection do not experience corresponding elevated food consumption requirements over the short term, even if those shells are not centered over the body mass of the hermit crab. Pagurus granosimanus crabs can bear the burden.

Manipulation of Coupled X‐Ray‐Excited Persistent Luminescence and Upconversion in Er3+ Doped Fluoride Nanoparticles for Multifaceted Applications

AbstractLanthanide doped nanoparticles (NPs) exhibit tunable X‐ray‐excited optical luminescence and X‐ray‐excited persistent luminescence (XEPL), holding broad prospects for applications in display/anti‐counterfeiting and X‐ray imaging. The development of effective strategies for multi‐dimensional applications based on lanthanide‐doped fluoride NPs are a constant challenge. Here, core–shell structured fluoride NPs, in which the heavy metal fluoride shell effectively suppresses the non‐radiative relaxation and simultaneously improve the X‐ray absorption of the shell are designed and fabricated. Under X‐ray irradiation, the developed NPs exhibit an increased number of secondary electrons which migrate to Er3+ centers at the interface and greatly improve the XEPL intensity. Additionally, the introduction of Mn2+ further enhances the XEPL intensity and offers an effective route to control the red‐green ratio of the upconversion spectrum. The NPs co‐doped with Mn2+ exhibit a bright green XEPL under X‐ray irradiation and a red emission under 1532 nm laser excitation. It is further validated that these NPs can be utilized for advanced anti‐counterfeiting and high‐resolution delayed imaging based on a film containing NPs as a scintillation screen. These findings suggest a new strategy of designing Er3+ doped NPs for multi‐dimensional applications.

A novel pressure compensated structure of lithium-ion battery pack for deep-sea autonomous underwater vehicle

The battery pack of deep-sea autonomous underwater vehicle (AUV) is placed in a heavy shell to protect the batteries from external pressure and moisture in a conventional manner. In recent years, the pressure compensated structure with thin film based on oil immersion has been gradually applied to the deep-sea AUV battery pack to achieve lightweight design. In this paper, the ratio of the structural parts of the pressure tolerated and pressure-compensated structures of the cabin to the total weight of the battery pack is systematically analyzed respectively in the depth range of 300– 6000 m, and a new pressure compensated structure with piston based on oil immersion is proposed. The mechanical properties and thermal characteristics of this structure are simulated and analyzed. Finally, the functionality of the compensated structure is verified by the established pressure test platform. The results show that the weight of conventional pressure tolerated structure increases nonlinearly with the increase of hydrostatic pressure to resist external hydrostatic pressure. The proposed pressure compensated structure with piston not only saves at least 18.3 % of the structural component weight at a hydrostatic pressure of 60 MPa, but also reduces the surface temperature of the battery pack due to the presence of dimethyl silicone oil as a pressure transfer medium.

Anomaly-Induced Quenching of gA in Nuclear Matter and Impact on Search for Neutrinoless ββ Decay

How to disentangle the possible genuine quenching of gA caused by scale anomaly of QCD parameterized by the scale-symmetry-breaking quenching factor qssb from nuclear correlation effects is described. This is accomplished by matching the Fermi-liquid fixed point theory to the “Extreme Single Particle (shell) Model” (acronym ESPM) in superallowed Gamow–Teller transitions in heavy doubly-magic shell nuclei. The recently experimentally observed indication for (1−qssb)≠0—that one might identify as “fundamental quenching (FQ)”—in certain experiments seems to be alarmingly significant. I present arguments for how symmetries hidden in the matter-free vacuum can emerge and suppress such FQ in strong nuclear correlations. How to confirm or refute this observation is discussed in terms of the superallowed Gamow–Teller transition in the doubly-magic nucleus 100Sn and in the spectral shape in the multifold forbidden β decay of 115In.

Electroslag Hollow Ingots for Nuclear and Petrochemical Pressure Vessels and Pipes

The paper presents ground reasoning and results of experiments and modeling of heavy hollow ingot manufacturing using advanced electroslag technology. The requirements for ingots for huge diameter reactor pressure vessels include high density, homogeneity, and minimal segregation, which are very difficult to achieve by traditional casting. In the electroslag remelting process (ESR), hollow ingots form in between two copper water-cooled molds under effective heat removal. This improves the solidification pattern due to the shortening of a solidifying volume thickness more than twice compared with a solid ingot of the same diameter. The shallow liquid metal pool and narrow mushy zone at the ESR hollow ingot solidification assure their high metallurgical quality. Due to the dense and low segregation structure, ESR hollow ingots proved to be used for as-cast pipes and heavy wall billets for further forging. The results of a mathematical simulation within the range of simulated dimensions (the outer diameter up to 2900 mm, wall thickness up to 750 mm) also predict the favorable solidification pattern for thick-wall hollow ingots of big diameters. The analysis made and the modeling results provide a framework for scaling up the sizes of hollow ingots produced by ESR and widening their application for manufacturing heavy wall large diameter shells for nuclear and petrochemical industries. The higher reachable productivity of hollow ingot formation and lower capacity of power supply source than that for solid ingots of the same diameter and weight are also preconditions of their energy saving and cost-effective manufacturing.

Nondestructive neutron imaging diagnosis of acidic gas reduction catalyst after 400-Hour operation in natural gas furnace

Residential natural gas furnaces are the primary space-heating devices in US homes, leading to substantial environmental impact caused by the acidic components in the furnace combustion gases. To experimentally demonstrate acidic gas reduction in a furnace, a monolithic catalyst was fabricated and was called the AGR. A commercially-available condensing furnace was retrofitted with the AGR, and a 400-hour reliability and durability test was conducted. The results showed that the AGR significantly reduced acidic gases in the flue gas and produced condensate with neutral pH. Challenges were also revealed: inappropriate condensate drainage caused incomplete combustion and amorphous carbon deposits. To nondestructively survey the internal state of the AGR, neutron computed tomography (NCT) was employed to produce spatially resolved 2D and 3D representations of the 2-L, aged AGR component. The NCT results confirm the integrity of the AGR component, which consists of two blocks, without deformation or damage to AGR channels. The distribution of the particle accumulation in the middle of the top block was visibly heavier than the entrance and exit of the top block. The representative cross-section views revealed significant aggregation in the central region but not at the rim. The spatially resolved details provide in-depth diagnosis, evaluation, and understanding of the AGR. The insights can enable new AGR designs that realize a uniform and self-cleaning flow pattern, alleviate significant particle aggregation, and thus enhance AGR-enabled furnace performance. The neutron imaging method demonstrates the good potential that can diagnose faults and improve the design, optimization, and production processes of novel catalysts and other components or systems with heavy metal shell.

Mechanisms of shape transfer and preheating in indirect-drive double shell collisions

Implosions of Hohlraum-driven double shell targets as an alternative inertial confinement fusion concept are underway at the National Ignition Facility. The double shell system relies on a series of energy transfer processes starting from thermal x-ray absorption by the outer shell, followed by collisional transfer of kinetic energy to a heavy metal inner shell, and finally, conversion to the internal energy of the deuterium-tritium fuel. During each of these energy transfer stages, low-mode asymmetries can act to reduce the ideal transfer efficiency degrading double shell performance. Mechanisms, such as hard x-ray preheat from the Hohlraum, not only decrease the efficiency of kinetic energy transfer but may also be a source of low-mode asymmetry. In this article, we evaluate the shape transfer processes through the time of shell collision using two-dimensional integrated Hohlraum and capsule computations. We find that the dominant mode of the shape transfer is well described using a “radial impulse” model from the shape of the foam pressure reservoir. To evaluate the importance of preheat on inner shell shape, we also report on first measurements of Au L-shell preheat asymmetry in a double shell with a tungsten pusher. These measurements showed a 65% higher preheat velocity at the pole of the capsule relative to the equator. We also found that the experiments provided rigorous constraints by which to test the Hohlraum model settings that impact the amount and symmetry of Au L-shell preheat via the plasma conditions inside the outer cone Au bubble.

Optimized Sensory Units Integrated in the Chiton Shell.

The first step for animals to interact with external environment is to sense. Unlike vertebrate animals with flexibility, it is challenging for ancient animals that are less flexible especially for mollusca with heavy shells. Chiton, as an example, has eight overlapping shells covering almost the whole body, is known to incorporate sensory units called aesthetes inside the shell. We used micro-computed tomography combined with quantitative image analysis to reveal the optimized shell geometry to resist force and the aesthetes' global distribution at the whole animal levels to facilitate sense from diverse directions both in the seawater and air. Additionally, shell proteomics combined with transcriptome reveals shell matrix proteins responsible for shell construction and potentially sensory function, highlighting unique cadherin-related proteins among mollusca. Together, this multi-level evidence of sensory units in the chiton shell may shed light on the formation of chiton shells and inspire the design of hard armor with sensory function.

Shell alterations in Hexaplex trunculus collected in the vicinity of an impacted zone by industrial marine discharges (Gabès, Southern Mediterranean)

Using the gastropod Hexaplex trunculus, a comparative study of the shell characteristics (morphometrics, microstructure and elemental composition) was carried out in the vicinity of Gabès city (Chatt Essalem, CE) which is known as seriously affected by industrial pollution, and two control zones (Ghanouche, GH and Teboulbou, TB). Gastropods from CE had larger, thicker and heavier shells, associated with bigger apertures and slighter soft bodies. Scanning electron microscope (SEM) revealed the presence of three shell layers having a crossed lamellar structure. The inner layer was thinner, while the median layer was thicker in snails from CE, suggestive of the ability of H. trunculus to remodel the shell microstructure accordingly. Moreover, the median and inner layers were marked by the presence of fibrous interbeds that were numerous and thicker in shells from CE. In this site, shell elemental alteration was also observed with a decrease in Ca, P, S, K and O contents against an increase in C, Cl and Mg compared to control sites. This investigation was in agreement with previous studies and further suggests the deleterious effect of coastal pollution generated by various industrial units implemented around Gabès city on marine organisms.

<i>Califrapana</i>: a new genus of California and Bája California late Oligocene to early Miocene muricids previously attributed to the genus <i>Rapana</i> (Mollusca: Gastropoda: Muricidae)

Califrapana n. gen., is proposed for California late Oligocene to early Miocene muricids attributed previously to the possibly Paleocene to modern western Pacific and Indian oceans genus Rapana. Four fossil species have been assigned to Rapana in the eastern Pacific. One of these species, R. perrini Clark and Arnold (1923), should be placed in another genus, the other species Purpura vaquerosensis Arnold (1907), R. imperialis Hertlein and Jordan (1927), and R. serrai Wiedey (1928) are synonymized here with the morphologically variable species Califrapana vaquerosensis n. comb. We confirm C. vaquerosensis is an index fossil for the lower and middle “Vaqueros” California provincial molluscan stage of late Oligocene to early Miocene age in southern California and Bája California, México, although the lack of numerical dating and the misuse of lithostratigraphic and biostratigraphic names had made that difficult to determine. Califrapana is distinguishable from similar genera by 1) its heavier shell, 2) an aperture that is pointed at its anterior and posterior ends, 3) more numerous fine to coarse spiral cords on the ultimate whorl, 4) less numerous nodes at the top of the ultimate whorl, which are commonly larger and more pronounced, and 5) the siphonal fasciole, which is large and broad, with a large, open channel.

Metazoan activity facilitates passive sediment trapping in modern supratidal microbialites: Revealed using µ-CT-scanning and microscopy.

Microbialites are formed through two processes, the trapping and binding of sediment grains and mineral precipitation. Sediment trapping and binding result in coarse sandy textures, whereas fine micritic textures are produced by mineral precipitation. Although well-studied modern microbialites (e.g. Bahamas and Shark Bay) are formed through the former process, purely trapped-and-bound examples are rare throughout the geologic record and limited to shallow-marine environments. Through the use of conventional microscopy and 3D micro-computed tomography (µ-CT) scanning, this study found that South African coastal microbialites have a primarily mineral precipitated texture, although detrital material is included sporadically. Furthermore, these modern microbialites exhibit both micritic and fibrous layering with high porosity. The novel use of 3D microtomography rotational scans has revealed that microbialites are extensively burrowed by metazoan activity and was also able to distinguish the occurrence and distribution of heavy minerals and detrital shell material in the samples. Some of the detrital grains appeared to be accidental/random inclusions, while in other cases the metazoan burrows provided space for the accumulation of sediment once abandoned. In both cases, sediment was incorporated as a product of intermittent accumulation, rather than systematic trapping and binding. The microfabric texture of South African microbialites is therefore a function of both biological (e.g. microbially mediated precipitation) and environmental (e.g. sporadic sediment deposition and inorganic cementation) influence. Overall, the findings presented here highlight the importance of these systems regarding microbialite formation, ichnology and taphonomy.

Coastal geology of the Holocene progradant plains of sandy beach ridges in Santa Catarina state, Southeastern Brazil

Beach ridges are indicators of supratidal and intertidal depositional environments built by waves. The major factors that influence on the ridge’s formation is related to antecedent topography, sediment supply, sedimentary balance, and substrate gradient. They consist of siliciclastic and/or bioclastic sediments whose grain size varies from very coarse sand to very fine sand. At Santa Catarina state, progradant plains are related to Pleistocene and Holocene regressive marine processes. The Holocene marine terraces, object of this study, predominate in the coastal plains of Passo de Torres, Pinheira, Jurerê, Tijucas and Navegantes, presenting heights from 3 to 6 m in elevations and 1 to 2 m in depressions. The ridge deposits are constituted by sandy sediments, medium to very fine, composed by quartz, opaque and heavy minerals and shell fragments. The runnel deposits comprehend silt-sand-clayey sediments enriched by organic matter. The evolution of Holocene Santa Catarina beach ridges is connected to the regressive events occurred after 5,1 ky BP that indicate the position of paleo coastlines and mean sea level of the Holocene.

No hybridization and marked interspecific differences in individual growth rate in mixed cultures of Manila clam (Ruditapes philippinarum) and grooved carpet-shell clam (R. decussatus)

The Manila clam (Ruditapes philippinarum) was introduced in Europe in the 1970's and in the following years it became naturalized. Interactions with the native species include hybridization with the grooved carpet-shell (GCS) clam (R. decussatus), which may have both useful and undesirable consequences. Here we report an attempt to produce hybrids in captivity by crossing 3 females and 4–5 males of each species in a two-step protocol that favored hybrid fertilizations. One-hundred animals were sampled at 15 months after fertilization, and scored for one morphological diagnostic trait (siphon fusion) and two diagnostic genetic DNA markers (ITS-2 and Fas-i1). No hybrids were detected, although the 0% hybridization rate has an associated 95% confidence interval of 3.3%. This result suggests that successful hybrid fertilization may be infrequent and/or the hybrid offspring may have very low survival rate. Abundant offspring of the two parental species were obtained and provided an unprecedented opportunity to study the innate differences in biological traits between the two species without the confounding influence of environmental variability. Individuals with ripe gonads were significantly less frequent in the Manila clam, suggesting an innate trend to earlier summer spawning in this species. Manila clam grew 20% faster than GCS clam and showed 80% heavier shells. However GCS clam showed almost twice as much variability in size as Manila clam, and some individuals of this species were as large as the largest Manila clams. The observed difference in growth variability may reflect a general loss of genetic variability in Manila clam during the introduction in Europe, although a random effect from using a small number of parents in the mixed cross cannot be discarded. Discrimination between these explanations, as well as determining more precisely the occurrence of hybridization in hatcheries by studying larger numbers of parents and offspring, may help improving clam aquaculture in Europe while preserving the genetic resources of the GCS clam.

The effect of including full-fat dried black soldier fly larvae in laying hen diet on egg quality and sensory characteristics

Effects of including full-fat dried black soldier fly larvae (DBSFL) in laying hen diets on egg quality, fatty acid and metal compositions of the yolk, and the sensory characteristics of hard-boiled eggs were investigated. In addition to the control soy-based layer diet, two experimental diets with soybean meal partially (50%) and completely substituted by chopped DBSFL (10 and 18%, respectively) were examined. Ninety 18-wk-old Novogen Brown layers were randomly divided into six mobile trailers (3 diets × 2 replications) in a 17 week trial. Five eggs from each trailer were collected, weighed and stored in 4 °C for 24 hours on weeks 4, 6, 8, 10, 12, 14 and 16 of the study. Egg shell characteristics (presence of cracks, deformation, and weight and thickness) and interior egg quality (albumen weight and height, yolk weight and colour, and Haugh units) tests were then conducted, and the proportions of the weights of shell, yolk and albumen were calculated. For the yolk nutrient composition tests, 12 eggs from each group was randomly selected, and yolks were extracted and mixed to provide 100 g sample per diet. Six judges also evaluated the sensory attributes of eggs in six sessions (two eggs/session). Control eggs were heavier, and had higher shell and albumen weights than DBSFL eggs. They also had a thicker shell compared to 18% DBSFL eggs. 10% DBSFL eggs had heavier shell and higher yolk to albumen ratio than 18% DBSFL eggs. Yolk fat content increased with the increase in the DBSFL content of the feed. However, odour, flavour and texture perceptions were not affected. In conclusion, partial substitution of soybean meal and oil with DBSFL resulted in the production of eggs with comparable quality to control eggs.

The energetic costs of living in the surf and impacts on zonation of shells occupied by hermit crabs.

Crashing waves create a hydrodynamic gradient in which the most challenging effects occur at the wave breaking zone and decrease towards the upper protected tide pools. Hydrodynamic forces depend on the shape of the submerged body; streamlined shapes decrease drag forces compared with bluff or globose bodies. Unlike other animals, hermit crabs can choose their shell shape to cope with the effects of water flow. Hermit crabs occupy larger and heavier shells (conical shape) in wave-exposed sites than those used in protected areas (globose shape). First, we investigated whether a behavioral choice could explain the shells used in sites with different wave action. Then, we experimentally tested whether the shells most frequently used in sites with different wave action reduce the energetic cost of coping with water flow. Metabolic rate was measured using a respirometric system fitted with propellers in opposite walls to generate bidirectional water flow. The choice of shell size when a large array of sizes are available was consistent with the shell size used in different intertidal sites; hermit crabs chose heavier conical shells in water flow conditions than in still water, and the use of heavy conical shells reduced the energetic cost of coping with water motion. In contrast to conical shells, small globose shells imposed lower energy costs of withstanding water flow than large globose shells. The size and type of shells used in different zones of the rocky shore were consistent with an adaptive response to reduce the energetic costs of withstanding wave action.

Effect of Culture Depth and Season on the Condition and Reproductive Indices of Blue Mussels (Mytilus edulis L.) Cultured in a Cold-Water Coastal Environment

Condition, growth, and reproductive indices of blue mussels (Mytilus edulis) grown in deep and shallow sites were studied from May to December 2016 in the South Arm region of Notre Dame Bay, Newfoundland. The region was shown to be characterized by a seasonal thermocline that formed in April and lasted to October annually, resulting in a cold-water deep layer (mean annual temperature: 4.36 ± 5.1°C) and a comparatively warmer surface layer (mean annual temperature: 5.81 ± 6.3°C). The deepwater culture sites extended into the cold-water layer and the shallow sites were typically in the warmer layer above. Mussels grown in shallow sites had longer and heavier shells than those from deepwater sites, likely linked to warmer surface waters. Both reproductive and physiological condition indices were high for mussels from both culture depths in May. Physiological condition declined for both deep and shallow cultured mussels from May through to August. Mussels from deep sites, however, had a higher overall mean dry tissue weight: wet tissue weight ratio for the study period. Reproductive indices, including measurements of reproductive output, declined for shallow mussels from May through to August, but remained high for deep mussels until August when a significant spawn occurred for mussels from both depths. In addition, mussels from deep sites were observed to maintain themselves in a prespawning ripe stage for a longer period than those from shallow sites. Variations in physiological and reproductive indices for mussels from each respective culture depth were thought to be linked to differences in the environmental characteristics of the deep and shallow water layers, including rate of temperature change and potential differences in phytoplankton quality and energetics. The additional data provided in the present study add to the current understanding of the effects of the deepwater environment on mussel reproduction patterns and its relationship to production meat yield. The data will help in highlighting the benefits of using deepwater sites leading to increased environmental sustainability for mussel culture in subarctic coastal environments such as those on the north coast of Newfoundland.

A new scheme for heavy nuclei: proxy-SU(3)

The SU(3) symmetry realized by J. P. Elliott in the sd nuclear shell is destroyed in heavier shells by the strong spin-orbit interaction. However, the SU(3) symmetry has been used for the description of heavy nuclei in terms of bosons in the framework of the Interacting Boson Approximation, as well as in terms of fermions using the pseudo-SU(3) approximation. We introduce a new fermionic approximation, called the proxy-SU(3), and we discuss how some of its novel predictions come out as a consequence of the short range of the nucleon-nucleon interaction and the Pauli principle.

Influence of surface ocean density on planktonic foraminifera calcification

This study provides evidence that ambient seawater density influences calcification and may account for the observed planktonic foraminifera shell mass increase during glacial times. Volumes of weighed fossil Globigerina bulloides shells were accurately determined using X-ray Computer Tomography and were combined with water density reconstructions from Mg/Ca and δ18O measurements to estimate the buoyancy force exerted on each shell. After assessment of dissolution effects, the resulting relationship between shell mass and buoyancy suggests that heavier shells would need to be precipitated in glacial climates in order for these organisms to remain at their optimum living depth, and counterbalance the increased buoyant force of a denser, glacial ocean. Furthermore, the reanalysis of bibliographic data allowed the determination of a relationship between G. bulloides shell mass and ocean density, which introduces implications of a negative feedback mechanism for the uptake of atmospheric CO2 by the oceans.