Heavy Metals Research Articles

Evaluation of asphalt film thickness and heavy metal leaching of oxidizing slag used as an aggregate material in dense-graded asphalt concrete.

Electric-arc-furnace (EAF) steelmaking uses scrap iron and steel as raw materials. Scrap iron and steel originate from complex sources and may contain heavy metal components which can leach into the environment over time due to wear-and-tear. A by-product of the EAF steelmaking process is oxidizing slag, and approximately 1.2 million metric tons is produced every year in Taiwan alone. This study investigated substitution of natural aggregates with oxidizing slag in dense-graded asphalt concrete. We evaluated the water resistance and asphalt film thickness of the oxidizing slag substituted asphalt concrete and further explored the performance of oxidizing slag as paving material. We determined the dissolved and total amounts of heavy metals in the oxidizing slag, comparing these results with current regulatory controls to assess the environmental compatibility of the oxidizing slag. We found that due to the complicated sources of oxidizing slag, the basic properties should be analyzed on a batch-to-batch basis. Furthermore, we recommend trial mixing before upscaling the production of oxidizing slag substituted dense-graded asphalt concrete to confirm the mixing time required to achieve uniformity. The results also show that in comparison to natural aggregates used in asphalt concrete, oxidizing slag exhibits superior performance in terms of increased asphalt film thickness and improved water resistance. Furthermore, oxidizing slag as an aggregate material was associated with decreased heavy metal leaching and reduced environmental pollution. The results of the toxicity characteristic leaching procedure (TCLP) met regulatory requirements. However, the microwave-assisted aqua-regia digestion procedure showed heavy metal concentrations exceeding the monitoring standards for food crops. Considering environmental compatibility, it is recommended that controlling the total amount of heavy metals in oxidizing slag should be included in regulatory requirements. Furthermore, we should prohibit the use of materials such as oxidizing slag and other steel furnace slag in the roadways adjacent to edible crop farmlands.

Investigation of heavy metals uptake in root-shoot of native plant species adjoining wastewater channels.

Metal pollution in water, soil, and vegetation is an emerging environmental issue. Therefore, this study investigated the abundance of heavy metals (HMs) within roots and shoots of native plant species i.e., Bromus pectinatus, Cynodon dactylon, Poa annua, Euphorbia heliscopa, Anagallis arvensis, and Stellaria media grown in the adjoining area of municipal wastewater channels of a Pakistani city of Abbottabad. HMs concentrations (mg L-1) in municipal wastewater were: chromium (Cr) (0.55) > nickel (Ni) (0.09) > lead (Pb) (0.07) > cadmium (Cd) (0.03). Accumulation of HMs in both roots and shoots of plant species varied as B. pectinatus > C. dactylon > P. annua > E. heliscopa > A. arvensis > S. media. Irrespective of the plant species, roots exhibited higher concentrations of HMs than shoots. Higher amount of Cr (131.70 mg kg-1) was detected in the roots of B. pectinatus and the lowest amount (81 mg kg-1) in A. arvensis, Highest Cd concentration was found in the shoot of B. pectinatus and the lowest in the E. heliscopa. The highest concentration of Ni was found in the roots of S. media (37.40 mg kg-1) and the shoot of C. dactylon (15.70 mg kg-1) whereas the lowest Ni concentration was achieved in the roots of A. arvensis (12.10 mg kg-1) and the shoot of E. heliscopa (5.90 mg kg-1). The concentration of HMs in individual plant species was less than 1000 mg kg-1. Considering the higher values (> 1) of biological concentration factor (BCF), biological accumulation co-efficient (BAC), and translocation factor (TF), B. pectinatus and S. media species showed greater potential for HMs accumulation than other species. Therefore, these plants might be helpful for the remediation of HM-contaminated soil.

Different behavior of two strains of the arbuscular mycorrhizal fungus Rhizophagus intraradices on Senecio bonariensis Hook. & Arn. against heavy metal soil pollution: a pilot-scale test

Arbuscular mycorrhizal fungi (AMF) have different biological mechanisms to alleviate stressful conditions in heavy metals (HMs) polluted soil. These mechanisms were widely assessed under controlled/greenhouse conditions, but scarcely studied at pilot or territory scale. The aim of this study was to evaluate the response of two Rhizophagus intraradices strains isolated from soils with different histories of pollution, in association with Senecio bonariensis plants, growing in an engineering vegetal depuration module filled with artificially HMs polluted substrate. Plants inoculated with GC3 strain uptook low amounts of HMs and translocated them to shoot biomass. Heavy metals (Mg, Zn, Mn, Cr, Cu and Ni) and macronutrients (Ca, K, S and P) were accumulated in roots of S. bonariensis when inoculated with GB8 strain, limiting their translocation to the shoot. Uninoculated plants showed high translocation of all studied elements to shoot tissues. Concluding, tested R. intraradices strains have exhibited different phytoprotection mechanisms under extremely toxic concentrations of HMs. Moreover, the development of the assay at such a high Technological Readiness Level represents a novel contribution in this field of study.

RADIATION AND ECOLOGICAL STUDIES OF VEGETATION OF LUTSK DISTRICT OF VOLYN REGION

Abstract. The content of radionuclides of 137Сs, 90Sr and heavy metals in vegetation and agricultural products was found out in the settlements of Lutsk district of Volyn region. The results of our own field expeditionary research, as well as the results of generalization of stock materials of the Laboratory of Ecological Land Safety and Product Quality of the Volyn branch of the state institution “Institute for Soil Protection of Ukraine” (Lutsk) are the basis of the research. The plant products contain a small content of radioactive elements in the settlements of the Lutsk district of the Volyn region. The greatest pollution of plant products was found in the settlements of Sytnytsia and Omelіano. The content of the 137Сs, 90Sr does not exceed the maximum permissible concentrations. Exceeding the maximum permissible concentrations for the content of heavy metal salts was found in potatoes in the villages of Pozharky, Vesele. The results of the radiation-ecological study can be taken into account for the optimization of nature management and are necessary for state emergency management bodies of natural-technogenic content, for the possibility of reasonable planning and effective implementation of measures and projects for strengthening ecoenvironmental safety. The data obtained are important for the development of the National Concept to overcome the consequences of the Chernobyl disaster on the contamination of agricultural products with radionuclides and heavy metals.

Unlocking the potential of biochar: an iron-phosphorus-based composite modified adsorbent for adsorption of Pb(II) and Cd(II) in aqueous environments and response surface optimization of adsorption conditions.

In this work, iron-phosphorus based composite biochar (FPBC) was prepared by modification with potassium phosphate and iron oxides for the removal of heavy metal ions from single and mixed heavy metal (Pb and Cd) solutions. FTIR and XPS characterization experiments showed that the novel modified biochar had a greater number of surface functional groups compared to the pristine biochar. The maximum adsorption capacities of FPBC for Pb(II) and Cd(II) were 211.66mg·g-1 and 94.08mg·g-1 at 293K. The adsorption of Pb(II) and Cd(II) by FPBC followed the proposed two-step adsorption kinetic model and the Freundlich isothermal adsorption model, suggesting that the mechanism of adsorption of Pb(II) and Cd(II) by FPBC involved chemical adsorption of multiple layers. Mechanistic studies showed that the introduction of -PO4 and -PO3 chemisorbed with Pb(II) and Cd(II), and the introduction of -Fe-O increased the ion exchange with Pb(II) and Cd(II) during the adsorption process and produced precipitates such as Pb3Fe(PO4)3 and Cd5Fe2(P2O7)4. Additionally, the abundant -OH and -COOH groups also participated in the removal of Pb(II) and Cd(II). In addition, FPBC demonstrated strong selective adsorption of Pb(II) in mixed heavy metal solutions. The Response Surface Methodology(RSM) analysis determined the optimal adsorption conditions for FPBC as pH 5.31, temperature 26.01°C, and Pb(II) concentration 306.30mg·L-1 for Pb(II). Similarly, the optimal adsorption conditions for Cd(II) were found to be pH 5.66, temperature 39.34°C, and Cd(II) concentration 267.68mg·L-1. Therefore, FPBC has the potential for application as a composite-modified adsorbent for the adsorption of multiple heavy metal ions.

Water Quality and Environmental Health of Lakes in Coimbatore, India: A Comprehensive Study of the Physicochemical Characteristics

The deterioration of lake water quality is a major national issue, particularly in regions with industrial activity. This study assesses the water quality of five lakes in Coimbatore, India: Krishnampathi, Ukkadam, Kurichi, Sulur, and Singanallur, between December 2016 and April 2017. Twenty physicochemical parameters were analysed following standard procedures outlined by the American Public Health Association. Twelve heavy metal elements concentration in the lakes was analysed using inductively coupled plasma-mass spectroscopy. The results of this study revealed that the values of 17 physicochemical parameters fell beyond the WHO recommended pollution levels in all the study sites, except Sodium, Nitrate, and Sulphate. While, the concentration of 10 heavy metal elements determined were within acceptable limits of WHO-recommended standards for drinking water across all lakes, except Fe and Pb. F-test revealed that the concentration of all the physicochemical parameters varied significantly across all the study sites, except for pH (P = .749). Statistical analysis such as principal component analysis was adopted, and the results were discussed on the multivariate relationships of the physiochemical parameters and heavy metal concentrations of the five study sites. Overall, the findings highlight the urgent need for continuous monitoring and comprehensive management strategies to mitigate the deteriorating water quality in the lakes of Coimbatore district, emphasizing the critical importance of addressing the multitude of factors contributing to this environmental challenge.

Construction and Application of Nanozyme Sensor Arrays.

Compared with traditional "lock-key mode" biosensors, a sensor array consists of a series of sensing elements based on intermolecular interactions (typically hydrogen bonds, van der Waals forces, and electrostatic interactions). At the same time, sensor arrays also have the advantages of fast response, high sensitivity, low energy consumption, low cost, rich output signals, and imageability, which have attracted widespread attention from researchers. Nanozymes are nanomaterials which own enzyme-like properties. Because of the adjustable activity, high stability, and cost effectiveness of nanozymes, they are potential candidates for construction of sensor arrays to output different signals from analytes through the chemoresponse of colorants, which solves the shortcomings of traditional sensors that they cannot support multiple detection and lack universality. Recently, a sensor array based on nanozymes as nonspecific recognition receptors has attracted much more attention from researchers and has been applied to precise recognition of proteins, bacteria, and heavy metals. In this perspective, attention is given to nanozymes and the regulation of their enzyme-like activity. Particularly, the building principles and methods for sensor arrays based on nanozymes are analyzed, and the applications are summarized. Finally, the approaches to overcome the challenges and perspectives are also presented and analyzed for facilitating further research and development of nanozyme sensor arrays. This perspective should be helpful for gaining insight into research ideas within the field of nanozyme sensor arrays.

Reviewing Soil Contaminant Remediation Techniques

Harmful contaminants generating from industry, agricultural and human activity are causing the degradation of soil health, along with detrimental effects on human and the environment. It is imperative to safeguard the soil from these dangerous pollutants by using soil remediation techniques that may be effective breakdown these dangerous toxins. A sustainable approach to remediate the soil from different contaminants is bioremediation. Bioremediation is a method where microbes are used to alleviate soil pollution effectively. Natural microorganisms like fungus, bacteria, and algae are employed in the bioremediation process to break down heavy metal (lead, arsenic, chromium etc.) or organic based. chemical contaminants. This study examines the use of microorganisms and various bioremediation methods, including genetic engineering, nanotechnology, and electro bioremediation, for recovering polluted soil. This investigation clarified the challenges associated with applying these bioremediation technologies and microorganisms, as well as their effects on the ecosystem and inherent soil microbial population. The goal of this current study is to illustrate the various technologies which are more effective in this remediation process.

Rapid Detection of Heavy Metal Ions Co3+, Cu2+, Ni2+, and Zn2+ in Wastewater By Pyrimidine–Thiourea Ligand

Rapid Detection of Heavy Metal Ions Co3+, Cu2+, Ni2+, and Zn2+ in Wastewater By Pyrimidine–Thiourea Ligand

Biochemical changes, metal content, and spectroscopic analysis in sewage sludge composted with lignocellulosic residue using FTIR-MIR and FTIR-NIR.

The use of lignocellulosic residues, originating from sawdust, in composting sewage sludge for organic fertilizer production, is a practice of growing interest. However, few studies have explored the effect of the proportion of sawdust and sewage sludge raw materials on composting performance in the humification process. This study assessed the addition of sawdust in the sewage sludge composting process, regarding carbon content, presence of heavy metals, and humification of the organic compost. The experimental design employed was a randomized complete block design with five treatments featuring different proportions of organic residues to achieve C/N ratios between 30-1 (T1: 100% sewage sludge and 0% sawdust, T2: 86% sewage sludge and 14.0% sawdust, T3: 67% sewage sludge and 33% sawdust, T4: 55% sewage sludge and 45% sawdust, and T5: 46.5% sewage sludge and 53.5% sawdust) and five replications, totaling 25 experimental units. The addition of lignocellulosic residue in sewage sludge composting increased the levels of TOC and the C/N ratio, reduced the levels of pH, P, N, Na, Ba, and Cr, and did not interfere with the levels of K, Ca, Mg, S, CEC, labile carbon, and metals Fe, Zn, Cu, Mn, Ni, and Pb. The increase in the proportion of sawdust residue favored the degradation of aliphatic groups, increasing the presence of aromatic structures and reducing humification at the end of composting. The use of sawdust as a lignocellulosic residue in sewage sludge composting is a viable and efficient alternative to produce high-quality organomineral fertilizers.

Assessing the Ecological Risks and Spatial Distribution of Heavy Metal Contamination at Solid Waste Dumpsites

Assessing the Ecological Risks and Spatial Distribution of Heavy Metal Contamination at Solid Waste Dumpsites

How Tungurahua Volcano Dropped Heavy Metals into Ecuador’s Food Supply

How Tungurahua Volcano Dropped Heavy Metals into Ecuador’s Food Supply

Lead (Pb) Sorption Kinetics by Clay Minerals: Bentonite and Zeolite

Background: Heavy metal pollution chiefly lead (Pb) causes various environmental disequilibrium and health hazards. Immobilization of lead (Pb) usingclay minerals is cost effective for metal remediation due to their higher surface area and negative charges. Methods: This study was taken up to assess the Pb removal potentials of bentonite and zeolite from contaminated water and to study the effect of sorbent dosage, initial Pb2+ concentrations and incubation time intervals on Pb adsorption and desorption was studied. Result: Zeolite was effective in immobilising Pb (78.0%) than bentonite (70.9%) which increased with increasing sorbent dosage and time intervals. The pseudo second-order kinetic model described the Pb adsorption precisely. Chemisorption was the dominant mechanism operating in aqueous solution system, hence, it could be concluded that zeolite can be utilized as an efficient sorbent for wastewater treatment.

Highly Sensitive Whole-Cell Mercury Biosensors for Environmental Monitoring

Whole-cell biosensors could serve as eco-friendly and cost-effective alternatives for detecting potentially toxic bioavailable heavy metals in aquatic environments. However, they often fail to meet practical requirements due to an insufficient limit of detection (LOD) and high background noise. In this study, we designed a synthetic genetic circuit specifically tailored for detecting ionic mercury, which we applied to environmental samples collected from artisanal gold mining sites in Peru. We developed two distinct versions of the biosensor, each utilizing a different reporter protein: a fluorescent biosensor (Mer-RFP) and a colorimetric biosensor (Mer-Blue). Mer-RFP enabled real-time monitoring of the culture’s response to mercury samples using a plate reader, whereas Mer-Blue was analysed for colour accumulation at the endpoint using a specially designed, low-cost camera setup for harvested cell pellets. Both biosensors exhibited negligible baseline expression of their respective reporter proteins and responded specifically to HgBr2 in pure water. Mer-RFP demonstrated a linear detection range from 1 nM to 1 μM, whereas Mer-Blue showed a linear range from 2 nM to 125 nM. Our biosensors successfully detected a high concentration of ionic mercury in the reaction bucket where artisanal miners produce a mercury–gold amalgam. However, they did not detect ionic mercury in the water from active mining ponds, indicating a concentration lower than 3.2 nM Hg2+—a result consistent with chemical analysis quantitation. Furthermore, we discuss the potential of Mer-Blue as a practical and affordable monitoring tool, highlighting its stability, reliance on simple visual colorimetry, and the possibility of sensitivity expansion to organic mercury.

Enhanced Cadmium Sensing in Fertilizer Samples using Zeolite-modified Graphite Electrode

Abstract The presence of heavy metals in fertilizers poses significant environmental and health risks, necessitating robust detection methods to ensure agricultural sustainability and food safety. This study focuses on synthesizing Na-P1 zeolite from coal fly ash and fumed silica wastes, employing it as a potent modifier in graphite electrodes to enhance the electrochemical detection of cadmium(II) in fertilizer samples. Through meticulous assessment using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy, the electrochemical performance of the zeolite-modified graphite electrode was evaluated. The optimization process involved fine-tuning various parameters such as paste composition, solution pH, scan rate, and analyte concentration. Real sample analysis confirmed the applicability of the method in fertilizer samples. Notably, in an HCl medium (pH=1.0), the SWV oxidation peak of Cd(II) was observed at -0.56 V (vs. SCE) with a deposition time of 20 s and a scan rate of 75 mV∙s⁻¹. The ZGE exhibited a remarkable detection limit of 1 µM and a high sensitivity of 6.581 µA/µM.cm² within a linear detection range of 10-3-10-6 M. These findings highlight the potential utility of Na-P1 zeolite in handheld analytic device manufacturing, offering promising applications in environmental monitoring, resource management, and water and soil resource remediation.

LCMS-Metabolomic Profiling and Genome Mining of Delftia lacustris DSM 21246 Revealed Lipophilic Delftibactin Metallophores.

Bacteria have evolved various strategies to combat heavy metal stress, including the secretion of small molecules, known as metallophores. These molecules hold a potential role in the mitigation of toxic metal contamination from the environment (bioremediation). Herein, we employed combined comparative metabolomic and genomic analyses to study the metallophores excreted by Delftia lacustris DSM 21246. LCMS-metabolomic analysis of this bacterium cultured under iron limitation led to a suite of lipophilic metallophores exclusively secreted in response to iron starvation. Additionally, we conducted genome sequencing of the DSM 21246 strain using nanopore sequencing technology and employed antiSMASH to mine the genome, leading to the identification of a biosynthetic gene cluster (BGC) matching the known BGC responsible for delftibactin A production. The isolated suite of amphiphilic metallophores, termed delftibactins C-F (1-4), was characterized using various chromatographic, spectroscopic, and bioinformatic techniques. The planar structure of these compounds was elucidated through 1D and 2D NMR analyses, as well as LCMS/MS-based fragmentation studies. Notably, their structures differed from previously known delftibactins due to the presence of a lipid tail. Marfey's and bioinformatic analyses were employed to determine the absolute configuration of the peptide scaffold. Delftibactin A, a previously identified metallophore, has exhibited a gold biomineralizing property; compound 1 was tested for and also demonstrated this property.

Source and Migration Pathways of Heavy Metals in Soils from an Iron Mine in Baotou City, China

Source and Migration Pathways of Heavy Metals in Soils from an Iron Mine in Baotou City, China

Heavy metal stress in the agro-environment: consequences, adaptations and remediation

Heavy metal stress in the agro-environment: consequences, adaptations and remediation

Optimizing 2D MoS2 for removal of anionic heavy metals from water: insights from density functional theory study

Optimizing 2D MoS2 for removal of anionic heavy metals from water: insights from density functional theory study

Recent trends on bioremediation of heavy metals; an insight with reference to the potential of marine microbes

Recent trends on bioremediation of heavy metals; an insight with reference to the potential of marine microbes