Head Deformity Research Articles

Early-Stage Femoral Head Hypoperfusion Correlates with Femoral Head Deformity at Intermediate Follow-up in Legg-Calvé-Perthes Disease.

Perfusion MRI (pMRI) can quantify femoral head hypoperfusion in early-stage Legg-Calvé-Perthes disease. We investigated whether the severity of hypoperfusion measured at the early stage correlates with femoral head deformity at intermediate-term follow-up. Sixty-three patients who were 5 to 11 years of age at the diagnosis of Legg-Calvé-Perthes disease and who had pMRI performed at an early stage (Waldenström Stage 1 to 2a) were retrospectively reviewed. Twenty-eight patients were treated nonoperatively and 35 were treated with proximal femoral varus osteotomy (PFVO). The sphericity deviation score (SDS) was used as the primary outcome. Femoral head perfusion and SDS were measured by 2 observers. Models assessing the relationship between hypoperfusion and SDS were fitted without and with stratifications by age at diagnosis and treatment method. All 63 patients had a minimum of 4 years of follow-up (mean follow-up, 7.5 ± 2.6 years). All had reached the healed stage (Stage 4), and their mean age was 15.6 ± 2.8 years. The SDS outcome showed a significant positive correlation with the hypoperfusion % (p < 0.001). In the <50% hypoperfusion range, the SDS indicated no-to-low deformity, with narrow variability of outcome. However, the SDS became exponentially worse and had a wider variability of outcome at the ≥50% hypoperfusion range. Multivariable analyses revealed age at diagnosis, hypoperfusion %, and treatment method as significant prognostic factors for SDS (p = 0.007, <0.001, and 0.042, respectively). When treatment outcomes were stratified by age at diagnosis and hypoperfusion %, PFVO showed significantly better SDS outcome than nonoperative treatment in patients with an age at diagnosis of ≥8 years and low (<50%) and intermediate (50% to 80%) hypoperfusion ranges (p = 0.036 and 0.021, respectively). Our study found a significant relationship between femoral head hypoperfusion measured in early-stage Legg-Calvé-Perthes disease and femoral head deformity at intermediate-term follow-up. This study provides new insight into the relationship between early-stage femoral head hypoperfusion and deformity. Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Femoroacetabular Impingement: A Literature Review

Femoroacetabular impingement (FAI) is a hip condition characterized by abnormal contact between the femoral head and the acetabulum, often leading to joint damage and osteoarthritis. This literature review explores the pathophysiology, diagnosis, and treatment options for FAI, synthesizing current research findings from clinical and biomechanical studies. FAI is classified into two primary types: cam impingement, caused by deformity of the femoral head, and pincer impingement, due to acetabular over-coverage. Mixed types involving both mechanisms are also common. Advancements in imaging modalities, such as MRI and CT, have improved diagnostic accuracy, allowing for earlier detection and better differentiation between types of FAI. Conservative treatment options, including physical therapy and anti-inflammatory medications, are often first-line therapies. However, surgical intervention, particularly arthroscopy, has gained prominence for symptomatic patients, demonstrating favorable outcomes in restoring hip function and delaying the progression of osteoarthritis. Despite the success of surgical interventions, challenges remain in understanding the long-term outcomes, particularly concerning the recurrence of symptoms and the risk of joint degeneration. This review also highlights controversies regarding the optimal management of asymptomatic FAI, as the risk-benefit balance of surgical treatment in such cases remains unclear. Overall, FAI remains a significant clinical issue requiring a multidisciplinary approach to optimize patient outcomes, and further longitudinal studies are necessary to assess the efficacy of treatment strategies over time. Keywords: Femoroacetabular, Impingement, Joint

Antifungal activity of poly(lactic acid) nanofibers containing the essential oil from Corymbia citriodora Hook or the monoterpenes β-citronellol and citronellal against mycotoxigenic fungi.

Food contamination by mycotoxigenic fungi is one of the principal factors that cause food loss and economic losses in the food industry. The objective of this work was to incorporate the essential oil from Corymbia citriodora Hook and its constituents citronellal and β-citronellol into poly(lactic acid) nanofibers; to characterize the nanofibers by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC); to evaluate the antifungal activity by the fumigation method; to evaluate the antimycotoxigenic activity against Aspergillus carbonarius, Aspergillus ochraceus, Aspergillus westerdijkiae, Aspergillus flavus and Aspergillus parasiticus; and to evaluate the morphology of these microorganisms. All the nanofibers had a regular, smooth and continuous morphology. FTIR analyses confirmed that the active ingredients were incorporated into the polymer matrix. All samples exhibited antifungal and ochratoxigenic inhibitory activities of up to 100% and 99%, respectively, with the best results observed for (PLA + 30 wt% β-citronellol) nanofibers and (PLA + 30 wt% citronellal) nanofibers. However, 100% inhibition of the production of aflatoxin B1 and B2 was not observed. The images obtained by SEM indicated that the nanofibers caused damage to the hyphae, caused a decrease in the production of spores, and caused deformation, rupture and non-formation of the conid head, might be an alternative for the control of mycotoxigenic fungi.

Effects of Stress and Strain on the Optic Nerve Head on the Progression of Glaucoma.

In primary open-angle glaucoma, the rate of retinal nerve fiber layer thickness decrease was negatively correlated with lamina cribrosa strain, which was associated with intraocular pressure and optic nerve head geometric factors. We hypothesized that the biomechanical deformation of the optic nerve head (ONH) contributes to the progression of primary open-angle glaucoma (POAG). This study investigated the biomechanical stress and strain on the ONH in patients with POAG using computer simulations based on finite element analysis (FEA) and analyzed its association with disease progression. We conducted a retrospective analysis that included patients diagnosed with early-to-moderate stage POAG. The strains and stresses on the retinal nerve fiber layer (RNFL) surface, prelaminar region, and lamina cribrosa (LC) were calculated using computer simulations based on FEA. The correlations between the rate of RNFL thickness decrease and biomechanical stress and strain were investigated in both the progression and non-progression groups. The study included 71 and 47 patients in the progression and non-progression groups, respectively. In the progression group, the factors exhibiting negative correlations with the RNFL thickness decrease rate included the maximum and mean strain on the LC. In multivariate analysis, the mean strain on the LC was associated with optic disc radius, optic cup deepening, axial length, and mean intraocular pressure (IOP), whereas the maximum strain was only associated with mean IOP. In early-to-moderate stage POAG, the rate of RNFL thickness decrease was influenced by both the mean and maximum strain on the LC. Strains on the LC were associated with mean IOP, optic disc radius, axial length, and optic cup deepening. These results suggest that not only IOP but also ONH geometric factors are important in the progression of glaucoma.

Technical Status and Development Trends of Difficult Throttles Treatment Technology in Gas Wells

Abstract In order to promote the development of treatment technology for difficult throttles in gas wells and assist in solving the problem of gas well shutdown caused by the failure of difficult throttle treatment, this paper delves into the structural principles of preset throttles and slip-type throttles, introducing various types such as preset wire deployment and fishable throttles, preset non-wire deployment and fishable throttles, mechanical slip-type throttles, and electric throttles. It systematically analyzes the difficulties in retrieving difficult throttles, including wire breakage, fishing head breakage, deformation and breakage of slips, eccentric fishing head, non-release of inflated rubber cylinder, jamming, sand burial, scaling, fluid accumulation, falling objects underground, tubing deformation, and complex production tubing strings. Furthermore, it sequentially introduces weighted steel wire fishing treatment, coiled tubing fishing treatment technology, milling and fishing stuck throttles treatment, snubbing operation treatment technology, and well killing and workover treatment technology, which encompass punching holes in the tubing treatment technology, tubing cutting technology under pressure and sand flushing technology. The shortcomings of each treatment technique are also highlighted. Taking into account the current challenges faced in the treatment of difficult throttles, such as high cost and low efficiency in low-pressure gas wells, poor technical adaptability, and high risk of operational failure, it is pointed out that future difficult throttle processing technology should focus on two key directions. Firstly, it should aim for non-well-killing and low-cost development. Secondly, it should strive to reduce the occurrence and treatment difficulty of difficult throttles from the source design. And it provides technical references and ideas for the design of the next generation throttles.

Multimodal radiomics and deep learning models for predicting early femoral head deformity in LCPD

PurposeTo develop a predictive model combining clinical, radiomic, and deep learning features based on X-ray and MRI to identify risk factors for early femoral head deformity in Legg-Calvé-Perthes disease (LCPD). MethodsThis study involved 152 patients diagnosed with early unilateral LCPD across two centers between January 2013 and December 2023, and included an independent external validation set to assess generalizability. Four machine learning methods, including logistic regression (LR), random forest (RF), support vector machine (SVM), and extreme gradient boosting (XGBoost), were employed to develop radiomics deep learning signatures. The clinical-radiomics model (Clinic + Rad), clinical-deep learning model (Clinic + DL), and clinical-radiomics-deep learning model (Clinic + Rad + DL) were developed by integrating radiomics deep learning signatures with clinical variables. The best model, integrated into a nomogram for clinical application, was evaluated using the area under the receiver operating characteristic curve (AUC). ResultsAmong the four machine learning methods, XGBoost demonstrated superior performance in our patient dataset: radiomic (Rad) model (AUC, 0.786) and deep learning (DL) model (AUC, 0.803). Clinical variables such as age at onset and JIC classification were associated with early femoral head deformity (p < 0.05). The combined model incorporating clinical, radiomic, and deep learning signatures demonstrated better predictive ability (AUC, 0.853). The nomogram can assist clinicians in effectively assessing the risk of early femoral head deformity. ConclusionThe Clinic + Rad + DL integrated model may be beneficial for prognostic assessment of early LCPD femoral head deformity, which is crucial for tailoring personalized treatment strategies for individual patients.

A retrospective study describing the acetabular consequences of Legg- Calve-Perthes disease

PurposeLegg Calve Perthes disease (LCPD) is a paediatric hip disorder caused by ischemia of the femoral epiphysis, causing femoral head deformity when untreated. This study aims to determine if previously validated pelvic obliquity radiographic parameters, used for assessing acetabular retroversion in developmental dysplasia of the hip, are applicable to patients with LCPD and its prognostic value.MethodA retrospective study of patients with Legg Calve Perthes disease was carried out, analysing 4 pelvic parameters: Ilioischial Angle, Obturator Index, Sharp’s Angle and Acetabular Depth-Width Ratio (ADR). The differences between healthy and affected hips were studied, and subsequently, it was assessed whether these parameters have prognostic value in the disease outcome.ResultsStatistically significant differences have been obtained in the ilioischial angle, obturator index and ADR, between the affected and healthy hip. However, only the Acetabular Depth-Width Ratio showed predictive value for the disease outcome.ConclusionAlthough this study revealed differences in pelvic parameters between healthy and diseased hips, with only the ADR showing statistical significance in the disease's evolution and prognosis, further studies with larger sample sizes are necessary.

Radial neck fracture in children-"Abenign fracture?"

Radial neck fractures in children are rare but clinically relevant injuries that are often accompanied by concomitant injuries. Girls between the ages of8 and 12 years old are more frequently affected, whereby acubitus valgus variant can be apredisposing factor. The main trauma mechanism is afall onto the outstretched, supinated arm with additional valgus stress. Radial neck fractures can be associated with concomitant injuries of the elbow joint, including an olecranon fracture and elbow dislocation. The diagnosis is typically made by conventional X‑radiographs, although ultrasonography can be indicated in younger children.The treatment depends on the fracture dislocation. Conservative treatment is certainly possible at any age if the proximal fragment is angulated less than 20°, while asurgical intervention can be indicated for larger dislocations depending on age. Closed reduction with internal fixation using aelastic stable intramedullary nail (ESIN) according to Métaizeau has become established as the standard procedure. Complications such as premature epiphyseal joint closure, synostosis, avascular necrosis, pseudarthrosis and deformation of the radial head can occur and affect the functional outcome. The treatment of such complications often requires acomprehensive multidisciplinary approach and can include both conservative and surgical measures. Long-term studies show that most patients with radial neck fractures achieve good to very good outcomes, although certain predictive factors are associated with poorer outcomes.Knowledge of the potential complications and their treatment is crucial for the successful management of children with radial neck fractures and should be considered when making clinical decisions.

Development of axisymmetric shell model for creep deformation analysis of reactor pressure vessel lower head

Under severe accident conditions of nuclear power plants, the lower head of a reactor pressure vessel can be at risk of creep deformation and potential failure. This study presents a computational model that can represent the creep deformation of the lower head through the application of shell theory. To account for the large deformation due to creep, kinematic equations are derived and implemented. Particularly, this study provides details of the mathematical formulation, which were lacking in previous studies. The analysis results using the developed model are compared with those of finite element analysis, considering deformation history, stress distribution, and deformed shape. A dimensionless time for the creep deformation is proposed based on the results, which can characterize the effective strain at failure. Finally, the developed model is applied to OECD lower head failure test for validation.

Numerical Study on the Coating Uniformity of Slot-Die Head Using FSI Method

Abstract Slot-die coating technology is one of the key processes in the production of lithium batteries. The design of die head, which is the core component of slot-die coating system, affects quality of lithium batteries directly. In this paper, Fluid-Structure Interaction (FSI) method is employed to evaluate the influence of die head deformation on coating quality. The results demonstrate that the FSI method provides a more accurate assessment of the influence of die head deformation on coating quality parameters compared to conventional methods. Based on this method, a reasonable range of operating pressure is determined for a specific model of coating head.

Adherence to Wide-Abduction Brace Treatment is Associated With Improved Hip Abduction and Radiographic Outcomes in Legg-Calvé-Perthes Disease.

The wide-abduction A-frame brace contains the femoral head to improve its remodeling in Legg-Calvé-Perthes disease (LCPD). There is no study of the effect of brace adherence on hip outcomes. The purpose of this study was to determine if patient adherence to A-frame brace treatment is associated with improved hip abduction range of motion and radiographic outcomes in children with LCPD. This retrospective study included patients aged 4 to 11 years with LCPD treated with an A-frame brace. Patients aged >11 and those treated with osteotomy before completing brace treatment were excluded. Built-in temperature sensors measured brace wear. Hip abduction was measured on examination before and after bracing. Deformity index (DI) and sphericity deviation score (SDS) were measured from radiographs at the 2-year follow-up and healed stage, respectively. Pearson correlation and multiple regression analyses were performed. Fifty-seven patients (44 male; 77%) were included with a mean age of 7.0±1.6 at brace treatment and mean adherence of 0.66±0.28. Brace adherence was associated with increased hip abduction (R=0.36; P=0.006) and decreased DI (R=-0.37; P=0.042) across all patients, and decreased SDS in patients <9 years old at the time of brace treatment (R=-0.58; P=0.024). A +0.50 increase in adherence was associated with +9.4° hip abduction (P=0.018), -0.13 DI (P=0.027), and -17.7 SDS (P=0.019). Adherence to A-frame brace treatment was associated with increased hip abduction, decreased femoral head deformity, and increased sphericity. Patients and parents can be counseled regarding brace adherence to maximize outcomes of treatment. III-Therapeutic Study.

The relationship between semen quality in male infertility clinic patients and bisphenol A：A Chinese cross-sectional study

Bisphenol A (BPA) is a growing concern as an endocrine-disrupting chemical due to its adverse health effects. However, the association between BPA and sperm quality in adult human males remains unclear. The aim of this study was to assess the daily life exposure level of BPA and analyze its correlation with sperm quality in males. Patients who sought treatment in Chinese infertility clinics between May and October 2023 were selected as study subjects. We determined participants' serum BPA content using high-performance liquid chromatography. Sperm count and motility were assessed using a computer-aided sperm analysis system, while sperm morphology was analyzed using an improved Papanicolaou stain. A total of 405 participants, averaging 33.01 ± 5.44 years old, were included. We observed low semen quality among participants in infertility clinics. Principal component analysis was performed for each semen quality index, and three principal components reflecting sperm motility, count, and morphology were extracted. The participants' mean serum BPA level was 6.96 ng/mL. Negative correlations were observed between serum BPA content and total sperm count, sperm density, forward motility rate, and non-forward motility rate. A positive correlation was found between the non-motile sperm rate and the head deformity rate. Morphological abnormalities were the predominant adverse effects observed. Despite low daily life BPA exposure, long-term low-dose exposure in the general population may damage semen quality. This study provides a scientific basis for managing health risks associated with BPA exposure.

Effect of Eye Globe and Optic Nerve Morphologies on Gaze-Induced Optic Nerve Head Deformations.

The purpose of this study was to investigate the effect of globe and optic nerve (ON) morphologies and tissue stiffnesses on gaze-induced optic nerve head deformations using parametric finite element modeling and a design of experiment (DOE) approach. A custom software was developed to generate finite element models of the eye using 10 morphological parameters: dural radius, scleral, choroidal, retinal, pial and peripapillary border tissue thicknesses, prelaminar tissue depth, lamina cribrosa (LC) depth, ON radius, and ON tortuosity. A central composite face-centered design (1045 models) was used to predict the effects of each morphological factor and their interactions on LC strains induced by 13 degrees of adduction. Subsequently, a further DOE analysis (1045 models) was conducted to study the effects and potential interactions between the top five morphological parameters identified from the initial DOE study and five critical tissue stiffnesses. In the DOE analysis of 10 morphological parameters, the 5 most significant factors were ON tortuosity, dural radius, ON radius, scleral thickness, and LC depth. Further DOE analysis incorporating biomechanical parameters highlighted the importance of dural and LC stiffness. A larger dural radius and stiffer dura increased LC strains but the other main factors had the opposite effects. Notably, the significant interactions were found between dural radius with dural stiffness, ON radius, and ON tortuosity. This study highlights the significant impact of morphological factors on LC deformations during eye movements, with key morphological effects being more pronounced than tissue stiffnesses.

Incidence of Nonsynostotic Plagiocephaly and Developmental Disorders

This is the first population-based study quantifying the incidence of nonsynostotic positional plagiocephaly and/or brachycephaly (PPB) in infancy and its association with developmental disorders. To report the incidence of PPB before age 1 year, the incidence of craniosynostosis, and the percentage of children with PPB diagnosed with a developmental disorder by age 7 years. This was a retrospective, population-based cohort study of children in the Rochester Epidemiology Project (REP) born in Olmsted County, Minnesota, from January 1, 2008, through December 31, 2012, with follow-up through age 7 years. Data were analyzed from March 2021 to April 2024. Physical examination detecting cranial deformity. The primary outcome was the incidence of PPB. Secondary outcomes were the incidence of craniosynostosis and the percentage of children with PPB diagnosed with a developmental disorder by age 7 years. Of 9909 infants (5084 [51.3%] male; 9205 [92.9%] born at term and 704 [7.1%] born preterm) included in the study, 575 had PPB, for a PPB incidence of 5.8% (95% CI, 5.3%-6.3%). The incidence of PPB was 5.3% (95% CI, 4.8%-5.8%) in term infants vs 11.8% (95% CI, 9.4%-14.6%) in preterm infants. The incidence of craniosynostosis was 0.16% (95% CI, 0.09%-0.26%). A developmental disorder was known or suspected in 4.2% (95% CI, 2.7%-6.2%) of infants at the time of PPB diagnosis; among 402 infants with PPB and follow-up through age 7 years, 30 (7.5%; 95% CI, 5.0%-10.7%) had a confirmed developmental disorder by 7 years of age. The prevalence of autism spectrum disorder (ASD) in children with a history of PPB who were followed up to age 7 years was 2.2% (9 of 402 children). This study found that only a small percentage of the infants had positional head deformity significant enough to be documented and/or referred for subspecialty evaluation, and only a small subset of these children went on to have a developmental disorder in childhood. This information is helpful for counseling families about their child's developmental risk at time of PPB diagnosis.

Radiocapitellar joint plasty for missed monteggia fracture with radial head deformity in children: a retrospective study.

The retrospective study reviewed the clinical and radiological outcomes of patients treated with radiocapitellar joint plasty. 10 children with missed Monteggia fracture (MMF) were reviewed. The average time from injury to operation was 20 months. The average age of children who underwent the operation was 10.5 years. 6 flat and 4 domed radial heads were included. 7 type I and 3 type III MMF were identified based on the Bado classification. All children with MMF were treated by open radial head reduction with radiocapitellar joint plasty and ulnar osteotomy (UO). The average union time was 4.9 ± 2.6 months. The average osteotomy angle to reduce the radial head was 15.7 ± 3.5°, and the average lengthening of the ulna was 8.2 ± 3.2 mm. The average preoperative flexion range of motion was 110.5 ± 9.1°, and the postoperative flexion range of motion was 138.8 ± 15.1° (p < 0.05). The average preoperative extension range of motion was 10.1 ± 3.2°, and the postoperative extension range of motion was 5.5 ± 3.3° (p < 0.05). The average preoperative pronation range of motion was 78.8 ± 8.7°, while the postoperative pronation range of motion was 81.1 ± 5.6° (p > 0.05). The average preoperative supination range of motion was 68.3 ± 9.7°, and the postoperative supination range of motion was 80.1 ± 7.8° (p < 0.05). The preoperative Kim score was 66.5 ± 10.9°, and the postoperative Kim score was 88.1 ± 12.6 (p < 0.05). The radial head was completely reduced in 9 patients, and subluxation in 1 patient. Osteoarthritis of the radiocapitellar joint was observed in 2 patients. Radiocapitellar joint plasty is effective surgical intervention for MMF with radial head deformity. It yields favorable functional outcomes while ensuring continued radial head reduction.

Biomechanical analysis of various internal fracture fixation devices used for treating femoral neck fractures: A comparative finite element analysis

IntroductionSeveral internal fixation devices are available for treating Pauwels type I, II and III femoral neck fractures. The present study compared various fixation implants for all Pauwels fracture types using a CT-based subject-specific finite element model of the femur and determined the most effective implant for each fracture type. Materials and MethodsThe analysis included four different configurations of cannulated screw models, Femoral Neck System, Dynamic Hip Screw and Dynamic Condylar Screw (with and without anti-rotational screw). Ti-alloy was considered as the implant material. Heterogeneous bone material property was assigned based on CT grey value. Frictional contact was assumed in the contact interfaces. Peak loading corresponding to normal walking and stair-climbing were considered. Equivalent strain in bone, equivalent stress in the implants, femoral head deformation and rotation, micromotion in the contact interfaces, and strain-shielding in bone were evaluated for each implanted model. ResultsStresses generated in the implants were within the yield limit of the implant material. In Pauwels I and II, the micromotion predicted at the contact regions in all the implanted models was within 100 µm, which is suitable for bone integration. However, in Pauwels III fracture, most of the implanted models other than DHS with AR-screw model exhibited micromotion of more than 150 µm in the contact regions, which is expected to inhibit bone growth. ConclusionsThe DHS with AR-screw implanted model was identified as the most effective in treating Pauwels I and III fractures. However, for Pauwels type II, DCS with an AR-screw implant was deemed superior to the other configurations.

Exploration of the combined role of immune checkpoints and immune cells in the diagnosis and treatment of ankylosing spondylitis: a preliminary study immune checkpoints in ankylosing spondylitis

ObjectiveImmune checkpoints have emerged as promising therapeutic targets for autoimmune diseases. However, the specific roles of immune checkpoints in the pathophysiology of ankylosing spondylitis (AS) remain unclear.MethodsHip ligament samples were obtained from two patient groups: those with AS and femoral head deformity, and those with femoral head necrosis but without AS, undergoing hip arthroplasty. Label-Free Quantification (LFQ) Protein Park Analysis was used to identify the protein composition of the ligaments. Peripheral blood samples of 104 AS patients from public database were used to validate the expression of key proteins. KEGG, GO, and GSVA were employed to explore potential pathways regulated by immune checkpoints in AS progression. xCell was used to calculate cell infiltration levels, LASSO regression was applied to select key cells, and the correlation between immune checkpoints and immune cells was analyzed. Drug sensitivity analysis was conducted to identify potential therapeutic drugs targeting immune checkpoints in AS. The expression of key genes was validated through immunohistochemistry (IHC).ResultsHLA-DMB and HLA-DPA1 were downregulated in the ligaments of AS and this has been validated through peripheral blood datasets and IHC. Significant differences in expression were observed in CD8 + Tcm, CD8 + T cells, CD8 + Tem, osteoblasts, Th1 cells, and CD8 + naive T cells in AS. The infiltration levels of CD8 + Tcm and CD8 + naive T cells were significantly positively correlated with the expression levels of HLA-DMB and HLA-DPA1. Immune cell selection using LASSO regression showed good predictive ability for AS, with AUC values of 0.98, 0.81, and 0.75 for the three prediction models, respectively. Furthermore, this study found that HLA-DMB and HLA-DPA1 are involved in Th17 cell differentiation, and both Th17 cell differentiation and the NF-kappa B signaling pathway are activated in the AS group. Drug sensitivity analysis showed that AS patients are more sensitive to drugs such as doramapimod and GSK269962A.ConclusionImmune checkpoints and immune cells could serve as avenues for exploring diagnostic and therapeutic strategies for AS.

3D Printing for the Development of Palatal Defect Prosthetics.

Three-dimensional (3D) printing has emerged as a promising new technology for the development of surgical prosthetics. Research in orthopedic surgery has demonstrated that using 3D printed customized prosthetics results in more precise implant placements and better patient outcomes. However, there has been little research on implementing customized 3D printed prosthetics in otolaryngology. The program sought to determine whether computed tomography (CT) serves as feasible templates to construct 3D printed palatal obturator prosthetics for defects in patients who have been treated for head and neck cancers. A retrospective review of patients with palatal defects was conducted and identified 1 patient with high quality CTs compatible with 3D modeling. CTs of the patient's craniofacial anatomy were used to develop a 3D model and a Formlabs 3B+ printer printed the palatal prosthetic. We successfully developed and produced an individualized prosthetic using CTs from a veteran with head and neck deformities caused by cancer treatment who was previously treated at the Veterans Affairs Palo Alto Health Care System. This project was successful in printing patient-specific implants using CT reproductions of the patient's craniofacial anatomy, particularly of the palate. The program was a proof of concept and the implant we created was not used on the patient. Customized 3D printed implants may allow otolaryngologists to enhance the performance and efficiency of surgeries and better rehabilitate and reconstruct craniofacial deformities to restore appearance and function to patients. Additional research will strive to enhance the therapeutic potential of these prosthetics to serve as low-cost, patient-specific implants.

Anatomic total shoulder arthroplasty for B2 glenoids treated with asymmetric reaming has equivalent survivorship and patient outcomes compared with type A glenoids at a mean 9-year follow-up

BackgroundWalch B2 glenoids can present a challenge to shoulder arthroplasty surgeons. Short-term studies have demonstrated that corrective reaming to 10° of retroversion in anatomic total shoulder arthroplasty (aTSA) can result in good outcomes, however there is little data reporting the long-term outcomes in this cohort. B2 glenoids treated with high-side reaming present a theoretical risk of early glenoid component failure as one may ream into the subchondral bone. This study aimed to demonstrate that 1) B2 glenoids treated with corrective reaming have durable results and 2) offer similar results to Walch A1/2 in long-term follow-up. MethodsPatients who underwent aTSA by a single surgeon (E.L.F.) were identified from a shoulder arthroplasty registry. Inclusion criteria included Walch A1, A2 or B2 glenoid, a diagnosis of primary shoulder osteoarthritis, and a minimum radiographic and clinical follow-up of 5 years. 43 patients with B2 glenoids were compared to a cohort of 42 patients with A1 or A2 glenoids. Preoperative computed tomography (CT) and radiographs were utilized to assess deformity, glenoid version, and posterior subluxation of the humeral head. Postoperatively, patients were assessed with radiographs and patient-reported outcome measures including American Shoulder and Elbow Surgeons (ASES) score, Simple Shoulder Test (SST) score, and Visual Analog Scale (VAS). Results85 shoulders (82 patients, 42 B2 and 43 A1/A2 glenoids) with an average follow-up of 9.4 years were included. In the B2 cohort, the average retroversion was 21.1° and posterior subluxation was 69.4% compared with 10.6°(p<0.001) and 57.5% (p<0.001) in the A1 or A2 cohort. The cohort demographics were similar except for male sex (B2 69.8% vs A1 or A2 37.2%, p=0.008). There was no difference between the cohorts in their improvement in ASES (p=0.807), SST (p=0.586), or VAS (p=0.930) scores. There was no difference in lateral humeral offset (p=0.889) or acromial humeral interval (p=0.468) between initial postoperative and final follow-up visits. Survivorship for B2 glenoids was 97.6%, 94.1% and 73.3% at 5, 10 and 15 years, respectively compared to 97.6%, 91.9% and 83.5% in type A glenoids. The revision rate was similar between the two groups (p=0.432). Lazarus score (p=0.682) and rates of humeral radiolucency (p=0.366) and humeral osteolysis (p=0.194) were similar between the two cohorts at final follow-up. ConclusionAsymmetric reaming of patients with B2 glenoids is a reliable method of glenoid preparation with excellent mid- to long-term clinical results, patient reported outcomes, and low revision rates similar to their A1 and A2 counterparts.

Idiopathic aseptic necrosis of the femoral head in children who are professionally engaged in gymnastics: A literature review

BACKGROUND: Aseptic necrosis of the femoral head in school-age children is a severe, rapidly progressive degenerative and dystrophic disease. A significant proportion of girls aged 10 years with osteonecrosis of the femoral head have been professionally engaged in rhythmic gymnastics. The relationship between professional sports, in particular rhythmic gymnastics, and the development of this pathology and the mechanism of impaired blood flow in the femoral head in such cases remains unclear. The severity of the course and serious consequences of this disease in the form of multidimensional deformities of the femoral head, early arthrosis of the hip joint, and persistent disability, require close attention.&#x0D; AIM: To analyze modern world literature data on the etiology, pathomechanics, and features of the course and treatment of idiopathic aseptic necrosis of the femoral head in children professionally engaged in rhythmic gymnastics.&#x0D; MATERIALS AND METHODS: A literature search on the problem of idiopathic aseptic necrosis of the femoral head in children professionally engaged in rhythmic gymnastics in the open information databases was conducted in PubMed, Science Direct, and Library with an analysis depth of 20 years.&#x0D; RESULTS: The analysis of publications on the osteonecrosis of the femoral head allowed us to talk about the etiological connection of this condition with professional rhythmic gymnastics, namely, high-intensity repetitive loads on the hip joint of a child. Studies using in vivo laser Doppler flowmetry and 3D computer modeling prove the occlusion of blood vessel branches encircling the femur under excessive mechanical stress on the femoral head and potentially unfavorable positions in the hip joint – overextension (hyperextension), external rotation, and abduction.&#x0D; CONCLUSIONS: Professional gymnastics can be a risk factor for the development of osteonecrosis of the femoral head. Frequent late disease diagnoses with the development of severe deformity of the femoral head and end-stage coxarthrosis requiring total hip replacement in adolescents determine the need for early identification of the causes of hip pain in children engaged in gymnastics. The findings will help improve treatment results and reduce the number of organ replacement interventions.