Hammerhead Ribozyme Motif Research Articles

An Ancient Clade of Penelope-Like Retroelements with Permuted Domains Is Present in the Green Lineage and Protists, and Dominates Many Invertebrate Genomes.

Penelope-like elements (PLEs) are an enigmatic clade of retrotransposons whose reverse transcriptases (RTs) share a most recent common ancestor with telomerase RTs. The single ORF of canonical endonuclease (EN)+ PLEs encodes RT and a C-terminal GIY–YIG EN that enables intrachromosomal integration, whereas EN− PLEs lack EN and are generally restricted to chromosome termini. EN+ PLEs have only been found in animals, except for one case of horizontal transfer to conifers, whereas EN− PLEs occur in several kingdoms. Here, we report a new, deep-branching PLE clade with a permuted domain order, whereby an N-terminal GIY–YIG EN is linked to a C-terminal RT by a short domain with a characteristic CxC motif. These N-terminal EN+ PLEs share a structural organization, including pseudo-LTRs and complex tandem/inverted insertions, with canonical EN+ PLEs from Penelope/Poseidon, Neptune, and Nematis clades, and show insertion bias for microsatellites, but lack canonical hammerhead ribozyme motifs. However, their phylogenetic distribution is much broader. The Naiads, found in numerous invertebrate phyla, can reach tens of thousands of copies per genome. In spiders and clams, Naiads independently evolved to encode selenoproteins containing multiple selenocysteines. Chlamys, which lack the CCHH motif universal to PLE ENs, occur in green algae, spike mosses (targeting ribosomal DNA), and slime molds. Unlike canonical PLEs, RTs of N-terminal EN+ PLEs contain the insertion-in-fingers domain (IFD), strengthening the link between PLEs and telomerases. Additionally, we describe Hydra, a novel metazoan C-terminal EN+ clade. Overall, we conclude that PLE diversity, taxonomic distribution, and abundance are comparable with non-LTR and LTR-retrotransposons.

Cloning and Detection of Genomic Retrozymes and Their circRNA Intermediates.

Retrozymes are a novel family of non-autonomous retrotransposable elements that contain hammerhead ribozyme motifs. These retroelements are found widespread in eukaryotic genomes, with active copies present in many species, which rely on other autonomous transposons for mobilization. Contrary to other retrotransposons, transcription of retrozymes in vivo leads to the formation and accumulation of circular RNAs, which can be readily detected by RNA blotting. In this chapter, we describe the procedures needed to carry out the cloning of genomic retrozymes, and to detect by northern blot their circular RNA retrotransposition intermediates.

Highly motif- and organism-dependent effects of naturally occurring hammerhead ribozyme sequences on gene expression

ABSTRACTRecent bioinformatics studies have demonstrated a wide-spread occurrence of the hammerhead ribozyme (HHR) and similar small endonucleolytic RNA motifs in all domains of life. It is becoming increasingly evident that such ribozyme motifs participate in important genetic processes in diverse organisms. Although the HHR motif has been studied for more than three decades, only little is known about the consequences of ribozyme activity on gene expression. In the present study we analysed eight different naturally occurring HHR sequences in diverse genetic and organismal contexts. We investigated the influence of active ribozymes incorporated into mRNAs in mammalian, yeast and bacterial expression systems. The experiments show an unexpectedly high degree of organism-specific variability of ribozyme-mediated effects on gene expression. The presented findings demonstrate that ribozyme cleavage profoundly affect gene expression. However, the extent of this effect varies and depends strongly on the respective genetic context. The fast-cleaving type 3 HHRs [CChMVd(-) and sLTSV(-)] generally tended to cause the strongest effects on intracellular gene expression. The presented results are important in order to address potential functions of naturally occurring ribozymes in RNA processing and post-transcriptional regulation of gene expression. Additionally, our results are of interest for biotechnology and synthetic biology approaches that aim at the utilisation of self-cleaving ribozymes as widely applicable tools for controlling genetic processes.

Giant Reverse Transcriptase-Encoding Transposable Elements at Telomeres.

Transposable elements are omnipresent in eukaryotic genomes and have a profound impact on chromosome structure, function and evolution. Their structural and functional diversity is thought to be reasonably well-understood, especially in retroelements, which transpose via an RNA intermediate copied into cDNA by the element-encoded reverse transcriptase, and are characterized by a compact structure. Here, we report a novel type of expandable eukaryotic retroelements, which we call Terminons. These elements can attach to G-rich telomeric repeat overhangs at the chromosome ends, in a process apparently facilitated by complementary C-rich repeats at the 3′-end of the RNA template immediately adjacent to a hammerhead ribozyme motif. Terminon units, which can exceed 40 kb in length, display an unusually complex and diverse structure, and can form very long chains, with host genes often captured between units. As the principal polymerizing component, Terminons contain Athena reverse transcriptases previously described in bdelloid rotifers and belonging to the enigmatic group of Penelope-like elements, but can additionally accumulate multiple cooriented ORFs, including DEDDy 3′-exonucleases, GDSL esterases/lipases, GIY-YIG-like endonucleases, rolling-circle replication initiator (Rep) proteins, and putatively structural ORFs with coiled-coil motifs and transmembrane domains. The extraordinary length and complexity of Terminons and the high degree of interfamily variability in their ORF content challenge the current views on the structural organization of eukaryotic retroelements, and highlight their possible connections with the viral world and the implications for the elevated frequency of gene transfer.

Retrozymes are a unique family of non-autonomous retrotransposons with hammerhead ribozymes that propagate in plants through circular RNAs.

BackgroundCatalytic RNAs, or ribozymes, are regarded as fossils of a prebiotic RNA world that have remained in the genomes of modern organisms. The simplest ribozymes are the small self-cleaving RNAs, like the hammerhead ribozyme, which have been historically considered biological oddities restricted to some RNA pathogens. Recent data, however, indicate that small self-cleaving ribozymes are widespread in genomes, although their functions are still unknown.ResultsWe reveal that hammerhead ribozyme sequences in plant genomes form part of a new family of small non-autonomous retrotransposons with hammerhead ribozymes, referred to as retrozymes. These elements contain two long terminal repeats of approximately 350 bp, each harbouring a hammerhead ribozyme that delimitates a variable region of 600–1000 bp with no coding capacity. Retrozymes are actively transcribed, which gives rise to heterogeneous linear and circular RNAs that accumulate differentially depending on the tissue or developmental stage of the plant. Genomic and transcriptomic retrozyme sequences are highly heterogeneous and share almost no sequence homology among species except the hammerhead ribozyme motif and two small conserved domains typical of Ty3-gypsy long terminal repeat retrotransposons. Moreover, we detected the presence of RNAs of both retrozyme polarities, which suggests events of independent RNA-RNA rolling-circle replication and evolution, similarly to that of infectious circular RNAs like viroids and viral satellite RNAs.ConclusionsOur work reveals that circular RNAs with hammerhead ribozymes are frequently occurring molecules in plant and, most likely, metazoan transcriptomes, which explains the ubiquity of these genomic ribozymes and suggests a feasible source for the emergence of circular RNA plant pathogens.Electronic supplementary materialThe online version of this article (doi:10.1186/s13059-016-1002-4) contains supplementary material, which is available to authorized users.

Ubiquitous presence of the hammerhead ribozyme motif along the tree of life

Examples of small self-cleaving RNAs embedded in noncoding regions already have been found to be involved in the control of gene expression, although their origin remains uncertain. In this work, we show the widespread occurrence of the hammerhead ribozyme (HHR) motif among genomes from the Bacteria, Chromalveolata, Plantae, and Metazoa kingdoms. Intergenic HHRs were detected in three different bacterial genomes, whereas metagenomic data from Galapagos Islands showed the occurrence of similar ribozymes that could be regarded as direct relics from the RNA world. Among eukaryotes, HHRs were detected in the genomes of three water molds as well as 20 plant species, ranging from unicellular algae to vascular plants. These HHRs were very similar to those previously described in small RNA plant pathogens and, in some cases, appeared as close tandem repetitions. A parallel situation of tandemly repeated HHR motifs was also detected in the genomes of lower metazoans from cnidarians to invertebrates, with special emphasis among hematophagous and parasitic organisms. Altogether, these findings unveil the HHR as a widespread motif in DNA genomes, which would be involved in new forms of retrotransposable elements.

Differential binding of Mg2+, Zn2+, and Cd2+ at two sites in a hammerhead ribozyme motif, determined by 15N NMR.

A decamer duplex model of Domain II of the hammerhead ribozyme was synthesized with [8-13C-1,7,NH2-15N3]-guanosine at the known metal binding site, G10.1 and, for comparison, [2-13C-1,7,NH2-15N3]-guanosine at G16.2. The 15N NMR chemical shifts of the labeled N7s monitored during addition of Mg2+, Cd2+, and Zn2+ showed the same preference for binding at G10.1 over G16.2 for each metal. These results demonstrate that 15N labeling can be used to evaluate the binding of different metals, including Mg2+, to a given nitrogen, as well as to compare the binding potential of different sites.

The global conformation of the hammerhead ribozyme determined using residual dipolar couplings.

The global structure of the hammerhead ribozyme was determined in the absence of Mg(2+) by solution NMR experiments. The hammerhead ribozyme motif forms a branched structure consisting of three helical stems connected to a catalytic core. The (1)H-(15)N and (1)H-(13)C residual dipolar couplings were measured in a set of differentially (15)N/(13)C-labeled ribozymes complexed with an unlabeled noncleavable substrate. The residual dipolar couplings provide orientation information on both the local and the global structure of the molecule. Analysis of the residual dipolar couplings demonstrated that the local structure of the three helical stems in solution is well modeled by an A-form conformation. However, the global structure of the hammerhead in solution in the absence of Mg(2+) is not consistent with the Y-shaped conformation observed in crystal structures of the hammerhead. The residual dipolar couplings for the helical stems were combined with standard NOE and J coupling constant NMR data from the catalytic core. The NOE data show formation of sheared G-A base pairs in domain 2. These NMR data were used to determine the global orientation of the three helical stems in the hammerhead. The hammerhead forms a rather extended structure under these conditions with a large angle between stems I and II ( approximately 153 degrees ), a smaller angle between stems II and III ( approximately 100 degrees ), and the smallest angle between stems I and III ( approximately 77 degrees ). The residual dipolar coupling data also contain information on the dynamics of the molecule and were used here to provide qualitative information on the flexibility of the helical domains in the hammerhead ribozyme-substrate complex.

In vitro evolution suggests multiple origins for the hammerhead ribozyme

The hammerhead ribozyme was originally discovered in a group of RNAs associated with plant viruses, and has subsequently been identified in the genome of the newt (Notophthalamus viridescens), in schistosomes and in cave crickets (Dolichopoda species). The sporadic occurrence of this self-cleaving RNA motif in highly divergent organisms could be a consequence of the very early evolution of the hammerhead ribozyme, with all extant examples being descended from a single ancestral progenitor. Alternatively, the hammerhead ribozyme may have evolved independently many times. To better understand the observed distribution of hammerhead ribozymes, we used in vitro selection to search an unbiased sample of random sequences for comparably active self-cleaving motifs. Here we show that, under near-physiological conditions, the hammerhead ribozyme motif is the most common (and thus the simplest) RNA structure capable of self-cleavage at biologically observed rates. Our results suggest that the evolutionary process may have been channelled, in nature as in the laboratory, towards repeated selection of the simplest solution to a biochemical problem.

Sjα elements, short interspersed element-like retroposons bearing a hammerhead ribozyme motif from the genome of the Oriental blood fluke Schistosoma japonicum

Smα is a short interspersed element (SINE)-like retroposon that occurs in high copy number of the genome of the human blood fluke Schistosoma mansoni. The sequence of the consensus Smα element includes the hallmark features of SINE-like elements including a promoter region for RNA polymerase III, an AT-rich stretch at its 3′-terminus, a short length of 500 bp or less, and short direct repeat sequences flanking the insertion site. Interestingly, the sequence of Smα also encodes an active ribozyme bearing a hammerhead domain. Contrary to the recent findings of Ferbeyre et al. ( Mol. Cell. Biol. 18 (1998) 3880-8) that indicated that Smα-like elements were absent from the genome of the Oriental blood fluke Schistosoma japonicum, we report here that the genome of S. japonicum does contain a family of Smα-like retroposons, elements that we have named the Sjα family. Like Smα, Sjα elements are SINE-like in structure and sequence, are present at high copy number interspersed throughout the S. japonicum genome, and contain an ostensibly functional, hammerhead ribozyme motif. The presence of these elements in all species of Schistosoma so far examined suggests that the hammerhead domain was acquired by vertical transmission from a common schistosome ancestor.

Generation of circular RNAs and trans-cleaving catalytic RNAs by rolling transcription of circular DNA oligonucleotides encoding hairpin ribozymes.

A simple new strategy for the in vitro synthesis of circular RNAs and hairpin ribozymes is described. Circular single-strand DNA oligonucleotides 67-79 nt in length are constructed to encode both hairpin ribozyme sequences and ribozyme-cleavable sequences. In vitro transcription of these small circles by Escherichia coli RNA polymerase produces long repeating RNAs by a rolling circle mechanism. These repetitive RNAsundergo self-processing, eventually yielding unit length circular and linear RNAs as the chief products. The transcription is efficient despite the absence of promoter sequences, with RNA being produced in up to 400 times the amount of DNA circle used. It is shown that the linear monomeric hairpin ribozymes are active in cleaving RNA targets in trans , including one from HIV-1. Several new findings are established: (i) that rolling circle transcription can be extended to the synthesis of catalytic RNAs outside the hammerhead ribozyme motif; (ii) that rolling circle transcription is potentially a very simple and useful strategy for the generation of circular RNAs in preparative amounts; and (iii) that self-processed hairpin ribozymes can be catalytically active in trans despite the presence of self-binding domains.

Accessing rare activities from random RNA sequences: the importance of the length of molecules in the starting pool.

In the past few years numerous binding and catalytic motifs have been isolated from pools of random nucleic acid sequences. To extend the utility of this approach it is important to learn how to design random-sequence pools that provide maximal access to rare activities. In an effort to better define the relative merits of longer and shorter pools (i.e. pools with longer or shorter random-sequence segments), we have examined the inhibitory effect of excess arbitrary sequence on ribozyme activity and have evaluated whether this inhibition overshadows the calculated advantage of longer pools. The calculated advantage of longer sequences was highly dependent on the size and complexity of the desired motif. Small, simple motifs were not much more abundant in longer molecules. In contrast, larger motifs, particularly the most complex (highly modular) motifs, were much more likely to be present in longer molecules. The experimentally determined inhibition of activity by excess sequence was moderate, with bulk effects among four libraries ranging from no effect to 18-fold inhibition. The median effect among 60 clones was fivefold inhibition. For accessing simple motifs (e.g. motifs at least as small and simple as the hammerhead ribozyme motif), longer pools have little if any advantage. For more complex motifs, the inhibitory effect of excess sequence does not approach the calculated advantage of pools of longer molecules. Thus, when seeking to access rare activities, the length of typical random-sequence pools (< or = 70 random positions) is shorter than optimal. As this conclusion holds over a range of incubation conditions, it may also be relevant when considering the emergence of new functional motifs during early evolution.

PCR-based construction of long hammerhead ribozymes.

AbstractWith the advent of antisense technology, there has been much interest in the use of long RNAs expressed in vivo to inhibit the expression of target genes. More recently, there have been numerous reports that the incorporation of either hairpin or hammerhead ribozyme motifs (catalytic antisense) into such RNAs increases their effectiveness (1–3). This section will describe a generally applicable, simple, PCR-based method to construct catalytic antisense RNA containing the hammerhead catalytic core that will cleave the target of interest at a GUC sequence. All discussion will focus on the hammerhead motif, although, in principle, the hairpin motif could be incorporated instead.KeywordsMicrocentrifuge TubeHammerhead RibozymeHairpin MotifFinal InsertIncomplete DenaturationThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.