Gutmann Acceptor Number Research Articles

Al(III) and Ga(III) triflate complexes as solvate ionic liquids: speciation and application as soluble and recyclable Lewis acidic catalysts.

This work reports on the first solvate ionic liquids (SILs) based on aluminium(III) and gallium(III) triflates, M(OTf)3, and triglyme (G3). Liquid-phase speciation of these new SILs was studied by multinuclear NMR spectroscopy. Across the compositional range of G3 : M(OTf)3 mixtures, both metals were found to be in a hexacoordinate environment, with both G3 and [OTf]- ligands present in the first coordination sphere, and apparently exchanging through a dynamic equilibrium. The Lewis acidity was quantified by the Gutmann acceptor number (AN) and compared to the performance of SILs as Lewis acidic catalysts in model [3 + 3] cycloadditions. Despite saturated coordination, AN values were relatively high, reaching AN = ca. 71-83 for Al-SILs and ca. 80-93 for Ga-SILs, corroborating the labile nature of the metal-ligand bonding. In a model catalytic reaction, SILs were fully soluble in the reaction mixtures, in contrast to the corresponding triflate salts. The catalytic performance of SILs exceeded that of the corresponding triflate salts, and Ga-SILs were more active than Al-SILs, in agreement with AN measurements. In conclusion, the new Group 13 SILs can be considered as soluble and catalytically active forms of their corresponding metal triflates, with potential uses in catalysis.

A ternary eutectic solvent for cellulose nanocrystal production: exploring the recyclability and pre-pilot scale-up.

Deep eutectic solvents (DES) formed using choline chloride (ChCl), p-toluenesulfonic acid (pTSA) of stoichiometry ChCl: pTSA (1:1) and (1:2), and its ternary eutectic mixtures with phosphoric acid (PA) 85% as an additive (ChCl: pTSA: PA) were evaluated for cellulose nanocrystal (CNC) isolation. Initially, the hydrolytic efficiency to produce CNC of each DES was compared before and after adding phosphoric acid by Hammett acidity parameters and the Gutmann acceptor number. Moreover, different DES molar ratios and reaction time were studied at 80°C for CNC optimization. The nanomaterial characteristics were analyzed by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The ternary eutectic mixture ChCl: pTSA: PA molar ratio (1:1:1.35) was chosen as a suitable recyclable ternary system at the laboratory scale. A CNC yield of about 80% was obtained from the hydrolysis of commercial cellulose in five cycles of recovery, but it dropped to 35% in pre-pilot scaling. However, no variation in the average size of the resulting CNC was observed (132 ± 50nm x 23 ± 4nm), which presented high thermal stability (Tmax 362°C) and high crystallinity of about 80% after 3h of reaction time.

Empirical Hydrogen Bonding Donor (HBD) Parameters of Organic Solvents Using Solvatochromic Probes - A Critical Evaluation.

The solvatochromicity of established solvatochromic UV/Vis probes, which appear to be sensitive to the so-called hydrogen bond donor (HBD) property of the solvent, is analysed using the hydroxyl group density of alcoholic solvents DHBD as a physical parameter in comparison to the pKa, the chemical benchmark for acidity. Reichardt's dye B30, Kosowers Z-indicator 1-ethyl-4-(methoxycarbonyl) pyridinium iodide (K), Kamlet-Tafts α, Dragos S parameter, Catalans SA scale, the cis-dicyano-bis (1,10-phenanthroline) iron II complex (Schilt's Ferrocyphen dye, Fe) and Gutmann's acceptor number (AN) have been investigated. The observed dependencies of the empirical polarity parameters as a function of DHBD for several alcoholic solvent families requires a ompletely new physicochemical understanding of these established HBD parameters. Only the AN scale (or Fe) is able to bridge the gap between global polarity and acidity, provided the values are interpreted correctly and applied accordingly.

Inverse gas chromatography as a tool for screening materials: The relation between Lewis acid–base constants and triboelectric charge density of polymers

Since Saint-Flour and Papirer first introduced Gutmann's acceptor number and donor number parameters into the inverse gas chromatography (IGC) field in 1982, IGC has become an important technology for the measurement of surface Lewis acid–base properties of solid materials. However, introducing new roles of Lewis acid–base parameters, especially using them to predict material properties rather than just explain material properties, is an important aspect in developing IGC technology. In this paper, we first introduce the Schultz and Abraham methods for measurement of acid–base properties and discuss the traditional role of acid–base parameters. Then, we present a relation between the ratio of acid–base constants, Ka/Kb, and triboelectric charge density of some polymers to prove the possible new application field of IGC.

Inverse Temperature Crystallization of Formamidinium Tin Iodide: Indirect Transition State and Restriction of Cation Motion

Inverse temperature crystallization (ITC) growth of formamidinium tin iodide (FASnI3) is realized using γ-valerolactone (GVL) solvent, which possesses a low Gutmann acceptor number. The high-crysta...

A Review of Solvate Ionic Liquids: Physical Parameters and Synthetic Applications.

Solvate Ionic Liquids (SILs) are a relatively new class of ionic liquids consisting of a coordinating solvent and salt, that give rise to a chelate complex with very similar properties to ionic liquids. Herein is the exploration of the reported Kamlet-Taft parameters, Gutmann Acceptor numbers and the investigation of chelating effects through NMR spectroscopy of multiple atomic nuclei. These properties are related to the application of SILs as reaction media for organic reactions. This area is also reviewed here, including the implication in catalysis for the Aldol and Kabachnik-Fields reactions and electrocyclization reactions such as Diels-Alder and [2+2] cycloaddition. Solvate ILs exhibit many interesting properties and hold great potential as a solvent for organic transformations.

Mixed Chlorometallate Ionic Liquids as C4 Alkylation Catalysts: A Quantitative Study of Acceptor Properties

The acceptor properties of mixed chlorometallate ionic liquids for isobutane-butene alkylation (C4 alkylation) reaction were studied. These ionic liquids were prepared by mixing metal chlorides with either triethylamine hydrochloride or 1-butyl-3-methylimidazolium chloride in various molar ratios. Using triethylphosphine oxide as a probe, Gutmann Acceptor Numbers (AN) of the catalysts were determined, and the Lewis acidity of mixed chlorometallate ionic liquids was quantitatively measured. Additionally, AN value was developed to determine the relationship between Lewis acidity and catalytic selectivity. The favorite AN value for the C4 alkylation reaction should be around 93.0. The [(C2H5)3NH]Cl–AlCl3−CuCl appears to be more Lewis acidity than that of [(C2H5)3NH]Cl–AlCl3. The correlation of the acceptor numbers to speciation of the mixed chlorometallate ionic liquids has also been investigated. [AlCl4]−, [Al2Cl7]−, and [MAlCl5]− (M = Cu, Ag) are the main anionic species of the mixed chlorometallate ILs. While the presence of [(C2H5)3N·M]+ cation always decreases the acidity of the [(C2H5)3NH]Cl−AlCl3−MCl ionic liquids.

Altering the Coordination of Iron Porphyrins by Ionic Liquid Nanodomains in Mixed Solvent Systems

The solvent environment around iron porphyrin complexes was examined using mixed molecular/RTIL (room temperature ionic liquid) solutions. The formation of nanodomains in these solutions provides different solvation environments for substrates that could have significant impact on their chemical reactivity. Iron porphyrins (Fe(P)), whose properties are sensitive to solvent and ligation changes, were used to probe the molecular/RTIL environment. The addition of RTILs to molecular solvents shifted the redox potentials to more positive values. When there was no ligation change upon reduction, the shift in the E° values were correlated to the Gutmann acceptor number, as was observed for other porphyrins with similar charge changes. As %RTIL approached 100 %, there was insufficient THF to maintain coordination and the E° values were much more dependent upon the %RTIL. In the case of FeIII (P)(Cl), the shifts in the E° values were driven by the release of the chloride ion and its strong attraction to the ionic liquid environment. The spectroscopic properties and distribution of the FeII and FeI species into the RTIL nanodomains were monitored with visible spectroelectrochemistry, 19 F NMR and EPR spectroscopy. This investigation shows that coordination and charge delocalization (metal versus ligand) in the metalloporphyrins redox products can be altered by the RTIL fraction in the solvent system, allowing an easy tuning of their chemical reactivity.

Liquid coordination complexes of Lewis acidic metal chlorides: Lewis acidity and insights into speciation.

Coordination complexes of Lewis acidic metal chlorides AlCl3, GaCl3, InCl3, SbCl3, SnCl4, SnCl2, ZnCl2 and TiCl4 with trioctylphosphine (P888) and trioctylphosphine oxide (P888O) were synthesised. All compounds formed liquid coordination complexes (LCCs) at ambient temperature, although decomposition via a redox mechanism was detected in some cases. The Lewis acidity of the metal chlorides (measured in 1,2-dichloroethane solutions) and the LCCs (measured neat) was quantified by using the Gutmann acceptor number (AN) approach. In general, LCCs were equally or more Lewis acidic than the corresponding metal chlorides. The AN values were compared with the catalytic activity of selected LCCs in a model Diels-Alder reaction. Insight into speciation of LCCs was gained using multinuclear NMR spectroscopy, revealing that most LCCs comprised charge-neutral complexes rather than ionic ones. The relationship between the speciation, Lewis acidity (AN scale) and catalytic activity is discussed in detail. This approach reveals several new, promising catalytic systems, such as P888O-InCl3, with Lewis acidity enhanced compared to chloroindate ionic liquids, and P888O-TiCl4, with hydrolytic stability enhanced with respect to neat TiCl4.

Borenium ionic liquids as catalysts for Diels–Alder reaction: tuneable Lewis superacids for catalytic applications

Ionic liquids with Lewis superacidic borenium cations were used as catalysts in solvent-less Diels–Alder cycloaddition. The extremely high catalytic activity correlated with the Lewis acidity, expressed as the Gutmann acceptor number.

Phosphorescent platinum(ii) alkynyls end-capped with benzothiazole units.

Symmetric trans-bis(alkynyl)bis(phosphine) PtII complexes based on the 2-phenylbenzothiazole (pbt) unit [trans-Pt(C[triple bond, length as m-dash]C-pbt)2L2] [L = PPh31, PEt32, 1,3,5-triaza-7-phosphaadamantane (PTA) 3] and the mixed alkynyl-cyanide anionic complex (NBu4)2[trans-Pt(C[triple bond, length as m-dash]C-pbt)2(CN)2] (4) were synthesized. The complexes have been fully characterized including X-ray crystallography for 2 and 4. All complexes display long-lived emission with moderate quantum yields (ϕ 6.8-22.6%) in doped PMMA films at 298 K and complex 4 is also emissive in DMSO fluid and in rigid media (solid, glass at 77 K). Complex 4 displays a negative solvatochromic behavior. Absorption and emission energies have been analyzed by means of linear solvation energy based on Kamlet-Taft solvatochromism parameters and the Gutmann's acceptor numbers. The study indicates that solvatochromism is due to the contribution of solvent-to-cyanide hydrogen bonding and increased solvent dipolarity-polarizability. TD and TD-DFT calculations were performed on the ground and excited states of two different conformers of 2 and 4 to provide insight into the structural, electronic and optical properties of these systems.

Solvate Ionic Liquids as Reaction Media for Electrocyclic Transformations

AbstractSolvate ionic liquids (SILs) consisting of lithium bis(trifluoromethylsulfonyl)imide dissolved in tri‐ or tetraglyme have recently emerged as a novel class of ionic liquids. Herein, the first use of solvate ionic liquids as a replacement for molecular solvents in electrocyclization reactions is reported. The SILs promoted both Diels–Alder and [2+2] cycloaddition reactions, compared to an appropriate molecular solvent, and 5 M lithium perchlorate in diethyl ether. The Gutmann acceptor number (AN) of these solvate ionic liquids has also been determined by 31P NMR spectroscopy to be 26.5, thus being modest Lewis acids.

Spectroscopic Evidence of Nanodomains in THF/RTIL Mixtures: Spectroelectrochemical and Voltammetric Study of Nickel Porphyrins.

The presence and effect of RTIL nanodomains in molecular solvent/RTIL mixture were investigated by studying the spectroelectrochemistry and voltammetry of nickel octaethylporphyrin (Ni(OEP)) and nickel octaethylporphinone (Ni(OEPone)). Two oxidation and 2-3 reduction redox couples were observed, and the UV-visible spectra of all stable products in THF and RTIL mixtures were obtained. The E° values for the reduction couples that were studied were linearly correlated with the Gutmann acceptor number, as well as the difference in the E° values between the first two waves (ΔE12° = |E1° - E2°|). The ΔE12° for the reduction was much more sensitive to the %RTIL in the mixture than the oxidation, indicating a strong interaction between the RTIL and the anion or dianion. The shifts in the E° values were significantly different between Ni(OEP) and Ni(OEPone). For Ni(OEP), the E1° values were less sensitive to the %RTIL than were observed for Ni(OEPone). Variations in the diffusion coefficients of Ni(OEP) and Ni(OEPone) as a function of %RTIL were also investigated, and the results were interpreted in terms of RTIL nanodomains. To observe the effect of solvation on the metalloporphyrin, Ni(OEPone) was chosen because it contains a carbonyl group that can be easily observed in infrared spectroelectrochemistry. It was found that the νCO band was very sensitive to the solvent environment, and two carbonyl bands were observed for Ni(OEPone)(-) in mixed THF/RTIL solutions. The higher energy band was attributed to the reduced product in THF, and the lower energy band attributed to the reduced product in the RTIL nanophase. The second band could be observed with as little as 5% of the RTIL. No partitioning of Ni(OEPone)(+) into the RTIL nanodomain was observed. DFT calculations were carried out to characterize the product of the first reduction. These results provide strong direct evidence of the presence of nanodomains in molecular solvent/RTIL mixtures.

Lewis Superacidic Ionic Liquids with Tricoordinate Borenium Cations.

The first examples of ionic liquids based on borenium cations, [BCl2 L](+), are reported. These compounds form highly Lewis acidic liquids under solvent-free conditions. Their acidity was quantified by determining the Gutmann acceptor number (AN). Extremely high ANs were recorded (up to AN = 182, δ31P = 120 ppm), demonstrating that these borenium ionic liquids are the strongest Lewis superacids reported to date, with the acidity enhanced by the ionic liquid environment.

Lewis Superacidic Ionic Liquids with Tricoordinate Borenium Cations

AbstractThe first examples of ionic liquids based on borenium cations, [BCl2L]+, are reported. These compounds form highly Lewis acidic liquids under solvent‐free conditions. Their acidity was quantified by determining the Gutmann acceptor number (AN). Extremely high ANs were recorded (up to AN=182, δ31P=120 ppm), demonstrating that these borenium ionic liquids are the strongest Lewis superacids reported to date, with the acidity enhanced by the ionic liquid environment.

Ethylammonium alkanoate-based ionic liquid + water mixtures

A systematic study of a series of room-temperature ionic liquids, belonging to the ethylammonium alkanoate family (EAX), was carried out at 298.15 K and 0.1 MPa with the aim of investigating the effect of the anionic chain length on some thermophysical properties and their behaviour in water (W), over the whole mole fraction range. The determination of Gutmann acceptor numbers for the pure EAX by using 31P NMR spectroscopy allowed us to obtain a quantitative measure of Lewis acidity. Experimental densities, ρ, were used to calculate molar volumes, Vm, and excess molar volumes, VE. Complementary information was obtained by isothermal titration calorimetry that provided the values of the heat of mixing, HE, and the excess partial molar enthalpies of each component, \( \bar{H}_{1}^{E} \) and \( \bar{H}_{2}^{E} \). The density values of pure EAX samples decrease as the alkyl chain length of the anion increases. Moderate negative VE and HE values were found for each EAX + W system, indicating the presence of attracting interactions between the constituents.

Solvent-induced frequency shifts of 5-hydroxymethylfurfural deduced via infrared spectroscopy and ab initio calculations.

Solvent-induced frequency shifts (SIFS) of the carbonyl stretching vibration ν(C═O) of 5-hydroxymethylfurfural were measured in protic, polar aprotic, and nonpolar solvents. The Gutmann acceptor number (AN) was found to correlate with the measured frequency shifts. The SIFS in six solvents were investigated using ab initio electronic structure calculations, treating the solvent implicitly and with an explicit solvent ligand interacting with the carbonyl. The conductor-polarizable continuum model (CPCM) of solvation predicted that ν(C═O) shifted according with the dielectric constant as (ε - 1)/(2ε + 1), in agreement with the analytical predictions of the Kirkwood-Bauer-Magat (KBM) theory for a dipole in a dielectric continuum, but in disagreement with the experimental trend. The experimental SIFS were best predicted using gas-phase complexes of HMF and explicit solvent-ligand. Natural bond orbital (NBO) analysis and Bader's atoms in molecules theory were used to investigate the electronic structure of these complexes. Strong SIFS were found to arise from stronger H-bonding interactions, as observed in delocalization of carbonyl lone-pair electrons by H-bonding solvent σ*(X-H) orbitals, and an increase in charge density and a decrease in local potential energy at the H-bond (3, -1) critical point. Consequently, by predicting the experimental SIFS and examining the electronic structure, we find the first theoretical evidence for treating Gutmann's solvent AN as a measure of solvent Lewis acidity.

Dipolarity versus Polarizability and Acidity versus Basicity of Ionic Liquids as a Function of Their Molecular Structures

The four empirical solvent polarity parameters according to the Catalán scale--solvent acidity (SA), solvent basicity (SB), solvent polarizability (SP), and solvent dipolarity (SdP)--of 64 ionic liquids (ILs) were determined by the solvatochromic method. The SA parameter was determined solely by using [Fe(II)(1,10-phenanthroline)2(CN)2] (Fe), the SB parameter by using the pair of structurally comparable dyes 3-(4-amino-3-methylphenyl)-7-phenylbenzo[1,2-b:4,5-b']difuran-2,6-dione (ABF) and 3-(4-N,N-dimethylaminophenyl)-7-phenylbenzo[1,2-b:4,5-b']-difuran-2,6-dione (DMe-ABF), and the SP and SdP parameters by using the homomorphic pair of 4-tert-butyl-2-(dicyanomethylene)-5-[4-(diethylamino)benzylidene]-Δ(3)-thiazoline (Th) and 2-[4-(N,N-dimethylamino)benzylidene]malononitrile (BMN). The separation of SP and SdP for a set of 64 various ILs was performed for the first time. Correlation analyses of SP with physicochemical data related to ionization potentials of anions of ILs as well as with theoretical data show the correctness of the applied method. The found correlations of the Catalán parameters with each other and with the alkyl-chain length of 1-alkyl-3-methylimidazolium-type ILs gives new information about interactions within ILs. An analytical comparison of the determined Catalán parameters with the established Kamlet-Taft parameters and the Gutmann acceptor and donor numbers is also presented.

Brønsted acids in ionic liquids: how acidity depends on the liquid structure.

Gutmann Acceptor Number (AN) values have been determined for Brønsted acid-ionic liquid mixtures, over a wide compositional range. Four systems of general formula [C2mim][A]-HA (A(-) = bistriflamide, [NTf2](-); triflate, [OTf](-); mesylate, [OMs](-); or acetate, [OAc](-), [C2mim](+) = 1-ethyl-3-methylimidazolium cation) were studied. A library of Brønsted acidic systems of varying acidity was constructed and the AN parameter was found to be a convenient approach for quantifying their acidity. HOAc, HOMs and HOTf, when dissolved in ionic liquids, were found to associate with the respective anions to form hydrogen-bonded anionic clusters, [A(HA)x](-). In contrast, HNTf2 was solubilised as a discrete, undissociated molecule. AN values were sensitive to the presence of anionic clusters; acidity could be buffered to a particular AN by binding the solubilised acid in the anionic cluster form. Overall, a simple way to manipulate and quantify the Brønsted acidity of acid-ionic liquid mixtures was demonstrated, and measured AN values were related to liquid speciation.

Chlorostannate(II) Ionic Liquids: Speciation, Lewis Acidity, and Oxidative Stability

The anionic speciation of chlorostannate(II) ionic liquids, prepared by mixing 1-alkyl-3-methylimidazolium chloride and tin(II) chloride in various molar ratios, χ(SnCl2), was investigated in both solid and liquid states. The room temperature ionic liquids were investigated by (119)Sn NMR spectroscopy, X-ray photoelectron spectroscopy, and viscometry. Crystalline samples were studied using Raman spectroscopy, single-crystal X-ray crystallography, and differential scanning calorimetry. Both liquid and solid systems (crystallized from the melt) contained [SnCl(3)](-) in equilibrium with Cl(-) when χ(SnCl(2)) < 0.50, [SnCl(3)](-) in equilibrium with [Sn(2)Cl(5)](-) when χ(SnCl(2)) > 0.50, and only [SnCl(3)](-) when χ(SnCl(2)) = 0.50. Tin(II) chloride was found to precipitate when χ(SnCl(2)) > 0.63. No evidence was detected for the existence of [SnCl(4)](2-) across the entire range of χ(SnCl(2)), although such anions have been reported in the literature for chlorostannate(II) organic salts crystallized from organic solvents. Furthermore, the Lewis acidity of the chlorostannate(II)-based systems, expressed by their Gutmann acceptor number, has been determined as a function of the composition, χ(SnCl(2)), to reveal Lewis acidity for χ(SnCl(2)) > 0.50 samples comparable to the analogous systems based on zinc(II). A change of the Lewis basicity of the anion was estimated using (1)H NMR spectroscopy, by comparison of the measured chemical shifts of the C-2 hydrogen in the imidazolium ring. Finally, compositions containing free chloride anions (χ(SnCl(2)) < 0.50) were found to oxidize slowly in air to form a chlorostannate(IV) ionic liquid containing the [SnCl(6)](2-) anion.