Guided-mode Resonance Research Articles

Highly-efficient (>70%) and Wide-spectral (400-1700 nm) sub-micron-thick InGaAs photodiodes for future high-resolution image sensors.

This paper demonstrates the novel approach of sub-micron-thick InGaAs broadband photodetectors (PDs) designed for high-resolution imaging from the visible to short-wavelength infrared (SWIR) spectrum. Conventional approaches encounter challenges such as low resolution and crosstalk issues caused by a thick absorption layer (AL). Therefore, we propose a guided-mode resonance (GMR) structure to enhance the quantum efficiency (QE) of the InGaAs PDs in the SWIR region with only sub-micron-thick AL. The TiOx/Au-based GMR structure compensates for the reduced AL thickness, achieving a remarkably high QE (>70%) from 400 to 1700 nm with only a 0.98 μm AL InGaAs PD (defined as 1 μm AL PD). This represents a reduction in thickness by at least 2.5 times compared to previous results while maintaining a high QE. Furthermore, the rapid transit time is highly expected to result in decreased electrical crosstalk. The effectiveness of the GMR structure is evident in its ability to sustain QE even with a reduced AL thickness, simultaneously enhancing the transit time. This breakthrough offers a viable solution for high-resolution and low-noise broadband image sensors.

Sensitivity enhancement of guided mode resonance sensors under oblique incidence

The sensitivity of guided mode resonance (GMR) sensors is significantly enhanced under oblique incidence. Here in this work, we developed a simplified theoretical model to provide analytical solutions and reveal the mechanism of sensitivity enhancement. We found that the sensitivity under oblique incidence consists of two contributions, the grating sensitivity and waveguide sensitivity, while under normal incidence, only waveguide sensitivity exists. When the two contributions are constructively superposed, as in the case of positive first order diffraction of the grating, the total sensitivity is enhanced. On the other hand, when the two parts are destructively superposed, as in the case of negative first order diffraction, the total sensitivity decreases. The findings are further supported by FDTD numerical calculations and proof-of-concept experiments.

Room temperature mid-wave infrared guided mode resonance InAsSb photodetectors

We demonstrate room temperature operation of mid-wave infrared photodetectors leveraging a guided mode resonance architecture and bulk alloy InAsSb absorbers. Room temperature operation with low dark current is achieved by using detector structures with ultra-thin (150, 250 nm) absorbers leveraging the strong confinement enabled by the guided mode architecture. Devices with 1D and 2D grating arrays are fabricated and characterized, and compared to unpatterned detector devices. We see enhancement in the detectors’ optical response associated with coupling to both TE- and TM-polarized guided modes and good agreement between experimental and theoretically-predicted behavior. We show strong enhancement for unpolarized light incident on 2D grating arrays, with a broader spectral response than observed for polarized light incident upon 1D grating GMR detectors. The bulk InAsSb detectors presented in this work offer enhanced performance at room temperature for a range of imaging and sensing applications.

Blood Biomarker Detection Using Integrated Microfluidics with Optical Label-Free Biosensor.

In this study, we developed an optofluidic chip consisting of a guided-mode resonance (GMR) sensor incorporated into a microfluidic chip to achieve simultaneous blood plasma separation and label-free albumin detection. A sedimentation chamber is integrated into the microfluidic chip to achieve plasma separation through differences in density. After a blood sample is loaded into the optofluidic chip in two stages with controlled flow rates, the blood cells are kept in the sedimentation chamber, enabling only the plasma to reach the GMR sensor for albumin detection. This GMR sensor, fabricated using plastic replica molding, achieved a bulk sensitivity of 175.66 nm/RIU. With surface-bound antibodies, the GMR sensor exhibited a limit of detection of 0.16 μg/mL for recombinant albumin in buffer solution. Overall, our findings demonstrate the potential of our integrated chip for use in clinical samples for biomarker detection in point-of-care applications.

Genetic algorithm driven optimization of a guided mode resonator coupled to an infrared nanocrystal film

Genetic algorithm driven optimization of a guided mode resonator coupled to an infrared nanocrystal film

Design and Theoretical Analysis of a Low Demodulation Deviation PhC Dual-Parameter Sensor Based on Quasi-BIC and Guided Mode Resonance

Design and Theoretical Analysis of a Low Demodulation Deviation PhC Dual-Parameter Sensor Based on Quasi-BIC and Guided Mode Resonance

Multi-mode hybridization in the MXene tetramer metasurface for ultra-broadband solar energy utilization

MXene is promising in photothermal or photovoltaic conversion, while high-performance MXene metasurface solar absorbers based on simple and feasible structures are still lacking. This study aims to design a solar absorber with ultra-broadband absorption capability in the visible and near-infrared wavelength ranges based on the MXene nanoblock tetramer/silica film/MXene substrate structure. The average absorptivity of this proposed metasurface absorber is 96.9% in the wavelength range of 300–2500 nm covering the whole solar spectrum. The physics behind the high absorption results from multiple-mode hybridization in different resonant bands, including the coupling between the surface plasmons, cavity resonances, and guided-mode resonances. The broadband and high-absorption performance remains stable under large-angle incidence and structural parameter variations with the average absorption above 90% in the whole wavelength region of interest. The calculated energy absorption ratio of the AM1.5 solar radiation spectrum can reach up to 96.3%, indicating low solar energy loss and efficient solar energy capture. In summary, these results provide great application prospects in the fields of photothermal and photovoltaic conversion.

Efficient second-harmonic generation in a lithium niobate metasurface governed by high-Q magnetic toroidal dipole resonances.

Lithium niobate (LN) is an excellent nonlinear optical material due to its large nonlinear coefficient, low loss, and broad optical transparency window. So, it is widely used in the generation of nonlinear harmonics. Magnetic toroidal dipole (MTD) resonance is a special optical resonance mode, which can effectively localize the light field inside the device, thus enhancing the nonlinear effects of the materials. In this work, we numerically study the second-harmonic generation (SHG) effect of the LN metasurface based on the MTD mode with a high quality factor (Q-factor). The designed LN nanorod dimer metasurface supports high Q-factor MTD guided mode resonances (GMRs), which are excited by varying the center spacing of the two nanorods, and the Q-factor can be controlled by the offset distance. The excited MTD can effectively confine the electric field within the device, which enables the LN metasurface SHG conversion efficiency to reach 1.15 × 10-2. In addition, by adjusting the structural parameters, it is possible to effectively modulate the wavelength and conversion efficiency of the SHG. Our results provide a new route for high-quality nonlinear light sources.

Enhanced four-band absorption in a tunable graphene subwavelength grating structure for photodetection

This paper investigates a sub-wavelength multilayer dielectric grating structure based on a simple metasurface, achieving dynamically switchable four-band absorption enhancement. This enhancement spans the visible to near-infrared (NIR) range, with absorption exceeding 90%, representing nearly a 40-fold increase over the intrinsic absorption of a single graphene layer. The contributions of guided-mode resonance (GMR), optical Tamm state (OTS), and photonic crystal defect cavity resonance to the absorption spectra are analyzed separately, offering a method for independent multi-channel signal extraction. Additionally, we explore the impact of structural parameters on the absorption response and examine the broad-spectrum multiband detection mechanism. This mechanism, explained through the integration of resonant cavity perturbation theory and the dynamic tuning of absorption efficiency via graphene's Fermi energy levels, results in an independently tunable optical system for four key operating bands. These properties make the structure suitable for applications such as multiband biomedical photodetectors or components in optoelectronic devices with multiple operating bands.

Broadband infrared imaging governed by guided-mode resonance in dielectric metasurfaces

Nonlinear metasurfaces have experienced rapid growth recently due to their potential in various applications, including infrared imaging and spectroscopy. However, due to the low conversion efficiencies of metasurfaces, several strategies have been adopted to enhance their performances, including employing resonances at signal or nonlinear emission wavelengths. This strategy results in a narrow operational band of the nonlinear metasurfaces, which has bottlenecked many applications, including nonlinear holography, image encoding, and nonlinear metalenses. Here, we overcome this issue by introducing a new nonlinear imaging platform utilizing a pump beam to enhance signal conversion through four-wave mixing (FWM), whereby the metasurface is resonant at the pump wavelength rather than the signal or nonlinear emissions. As a result, we demonstrate broadband nonlinear imaging for arbitrary objects using metasurfaces. A silicon disk-on-slab metasurface is introduced with an excitable guided-mode resonance at the pump wavelength. This enabled direct conversion of a broad IR image ranging from >1000 to 4000 nm into visible. Importantly, adopting FWM substantially reduces the dependence on high-power signal inputs or resonant features at the signal beam of nonlinear imaging by utilizing the quadratic relationship between the pump beam intensity and the signal conversion efficiency. Our results, therefore, unlock the potential for broadband infrared imaging capabilities with metasurfaces, making a promising advancement for next-generation all-optical infrared imaging techniques with chip-scale photonic devices.

Prediction of simultaneous enhancement of Goos-Hänchen shift and reflectance in VO2 grating structure

Vanadium dioxide (VO2) material stands out in the family of the phase change materials due to its temperature-dependent phase transition properties, which make it a promising candidate for the temperature-dependent optoelectronic devices. Enhancement of the Goos-Hänchen (GH) shift is essential in VO2-based nanostructures for their applications, but it has been limited to the multilayered structures with VO2 materials so far. Here, we theoretically investigate the GH shift and corresponding reflectance in the VO2-based grating structure. We evidence that this structure has two GH peaks (3107λ and 2266λ) and high reflectance values (both up to 1) when VO2 is in the insulating phase as well as the maximum GH valley (−1061λ) and low reflectance (0.19) when VO2 is in the metallic phase. The electromagnetic field distributions in this hybrid structure suggest that the guided mode resonances (GMRs) can be excited no matter whether VO2 is in its insulating or metallic phases due to the couplings between the incident waves and the adjacent evanescent diffracted order waves, which produces their enhanced GH shifts. Different from the former case with the high reflectances and the large GH shifts, the latter has the low maximum magnetic field intensity due to the lossy property of the metallic VO2, which leads to the low reflectance and small GH valley value. Additionally, we have also found that by the alterations of the temperature-dependent conductivity of VO2 and the geometric parameters of the structure allows for the control the magnitude and position of the GH peak or valley. The simultaneously enhanced GH shifts and reflectances in the VO2-based grating structure, associated with its controllable features, enable it an effective configuration for establishing the temperature sensors and optoelectronic switches.

Strong coupling of double excitons with guided mode resonances and quasi-bound states in the continuum in heterogeneous metamaterials.

Heterogeneous metamaterials containing excitonic materials provide an ideal platform for strong exciton-photon coupling. In this Letter, we theoretically demonstrate four strong couplings in a heterogeneous metamaterial consisting of a TiO2 grating standing on a perovskite-WS2-perovskite waveguide layer by tuning the structural sizes. The quasi-bound state in the continuum (qBIC) and the guided mode resonance (GMR) both strongly coupled with the excitons of both perovskite and WS2 under oblique incident illumination, resulting in four large Rabi splittings of 177.32, 187.53, 406.25, and 435.09 meV via a reasonable combination of oscillator strengths of perovskite and WS2. Double strong coupling behaviors are also achieved when the grating period equals 222 nm with an incident light angle of 19.3°. Moreover, double ultrastrong coupling can even be realized by the GMR and qBIC respectively interacting with the exciton of WS2 when its oscillator strength reaches a certain value. Our work paves an effective avenue to realizing strong coupling and even ultrastrong coupling between multiple excitons and multiple optical modes.

Ultranarrow and multiband perfect absorbers based on dual quasi-bound states in the continuum in near infrared

High quality factor (Q-factor) and multiband perfect absorbers are highly desired in light-harvesting efficiency related optical devices, yet they are always limited by conventional mechanisms like electromagnetically induced transparency, Tamm or plasmonic resonance. In this paper, through constructing the strong coupling between two guided-mode resonances in subwavelength gratings, we propose an ultranarrow and multiband perfect absorber based the dual-band quasi-bound states in the continuum (quasi-BIC) design in near infrared. Benefiting from its angle-dependent characteristic, the device can be straightforwardly utilized for light-switched lamps and optical sensors. Q-factor 8337 and the modulation depth 98.1% are realized while the insertion loss is only 0.07 dB. Compared with its conventional counterparts, the quasi-BIC based absorber enables an excellent hexa-frequency and ultranarrow asynchronous switch function. The quatary-band perfect absorption below 1 nm bandwidth can be applied to the optical sensor to detect four light signals with weak signal strength. This work provides a theoretical basis for multifunctional absorbers with high Q-factor, high modulation depth, and low insertion loss.

Theoretical Study of Flexible Guided Mode Resonance Formed by Embedding Silver Nanoparticles in the Polymer Matrix for Strain Sensing Applications

Theoretical Study of Flexible Guided Mode Resonance Formed by Embedding Silver Nanoparticles in the Polymer Matrix for Strain Sensing Applications

A comparative study of the photonic crystals-based cavities and usage in all-optical-amplification phenomenon

Optical technology has seen a revival from the previous decade, in terms of innovations and research, especially relating to optical integrated circuits. Similarly, Photonic Crystals (PCs) are one of the main contenders for the purpose. Therefore, this research work implicates different arrangements of the 3-Dimensional PC units based on the employment of a varying radius PC-cavity and its position i.e., at the beginning and within the middle of the PC-lattice. The effects of these PC-cavities are studied, investigating higher shifting in resonant wavelength, a narrower linewidth around 0.0061 µm and a quality factor of 99.59, comprising of a PC-cavity of radius 0.300 µm using input signal only i.e., coupled into the optical structure using the phenomenon of the Guided-mode-resonances (GMR). The structures are computed using an open-source FDTD platform, employing a stripe-model-based structure utilizing the Periodic Boundary Condition to save time and computational resources and later the PML for the realization of the Finite models. Moreover, the concluded structures based on the position of the PC-cavity, are demonstrated for the design of the all-optical-amplification device, executing a control signal reporting an 8 % of the amplification in the output of the input signal.

Bloch-surface-wave resonance in a cavity resonator for focusing retroreflection.

A wavelength-selective retroreflector for a diverging wave will be an attractive external mirror for compact wavelength-stabilized semiconductor lasers and consists of a focusing grating coupler and a cavity resonator. In this Letter, the retroreflector utilizing a Bloch surface wave (BSW) resonance was theoretically investigated for improving the retro-reflectance in comparison to a previously reported structure utilizing guided-mode resonance (GMR). A retroreflector with an aperture size of 31 µm and focal length of 67 µm was designed for an operation wavelength of 1550 nm. The maximum retro-reflectance is predicted by numerical simulation to be higher by 11% than that of the GMR-based retroreflector.

Even-order optical harmonics generated from centrosymmetric-material metasurfaces

Generation of even-order optical harmonics requires noncentrosymmetric structures being conventionally observed in crystals lacking the center of inversion. In centrosymmetric systems, even-order harmonics may arise, e.g., at surfaces but such effects are usually very weak. Here we observe optical harmonics up to fourth order generated under the normal incidence from centrosymmetric dielectric metasurfaces empowered by resonances. We design silicon metasurfaces supporting optical quasibound states in the continuum and guided-mode resonances, and demonstrate the enhancement of second-harmonic signals by over three orders of magnitude compared to nonresonant thin films. Under the optimal conditions, the brightness of the second harmonic approaches that of the third harmonic, and the fourth-order harmonic becomes detectable. Published by the American Physical Society 2024

Very-large-scale-integrated high quality factor nanoantenna pixels.

Metasurfaces precisely control the amplitude, polarization and phase of light, with applications spanning imaging, sensing, modulation and computing. Three crucial performance metrics of metasurfaces and their constituent resonators are the quality factor (Q factor), mode volume (Vm) and ability to control far-field radiation. Often, resonators face a trade-off between these parameters: a reduction in Vm leads to an equivalent reduction in Q, albeit with more control over radiation. Here we demonstrate that this perceived compromise is not inevitable: high quality factor, subwavelength Vm and controlled dipole-like radiation can be achieved simultaneously. We design high quality factor, very-large-scale-integrated silicon nanoantenna pixels (VINPix) that combine guided mode resonance waveguides with photonic crystal cavities. With optimized nanoantennas, we achieve Q factors exceeding 1,500 with Vm less than 0.1 . Each nanoantenna is individually addressable by free-space light and exhibits dipole-like scattering to the far-field. Resonator densities exceeding a million nanoantennas per cm2 can be achieved. As a proof-of-concept application, we show spectrometer-free, spatially localized, refractive-index sensing, and fabrication of an 8 mm × 8 mm VINPix array. Our platform provides a foundation for compact, densely multiplexed devices such as spatial light modulators, computational spectrometers and in situ environmental sensors.

Multi-colour reflective metagrating with neutral transparency for augmented reality.

This paper presents the design and experimental validation of an all-dielectric and transparent metagrating-based metalens. Leveraging multiple guided mode resonances simultaneously, the metagrating enables the generation of two or more spectrally narrow reflection peaks. These peaks are achieved through the precise engineering of guided mode resonances, allowing for the reflection of a comb of vibrant and saturated colours. In addition to the investigation of underlying mechanisms, we introduce an analytical numerical method that facilitates rapid engineering of the spectral positions of the reflection peak comb. Experimental validation is provided for a bichromatic sample. Such metagrating can be promising for augmented reality systems, supporting individuals with mild to moderate cognitive impairments by delivering visual and textual stimuli that can improve indoor navigation, home safety, communication, and decision-making.

High-Q magnetic toroidal dipole resonance in all-dielectric metasurfaces

High quality (Q) factor toroidal dipole (TD) resonances have played an increasingly important role in enhancing light–matter interactions. Interestingly, TDs share a similar far-field distribution as the conventional electric/magnetic dipoles but have distinct near-field profiles from them. While most reported works focused on the electric TD, magnetic TDs (MTDs), particularly high-Q MTD, have not been fully explored yet. Here, we successfully realized a high-Q MTD by effectively harnessing the ultrahigh Q-factor guided mode resonances supported in an all-dielectric metasurface, that is, changing the interspacing between silicon nanobar dimers. Other salient properties include the stable resonance wavelength but a precisely tailored Q-factor by interspacing distance. A multipole decomposition analysis indicates that this mode is dominated by the MTD, where the electric fields are mainly confined within the dielectric nanostructures, while the induced magnetic dipole loops are connected head-to-tail. Finally, we experimentally demonstrated such high-Q MTD resonance by fabricating a series of silicon metasurfaces and measuring their transmission spectra. The MTD resonance is characterized by a sharp Fano resonance in the transmission spectrum. The maximum measured Q-factor is up to 5079. Our results provide useful guidance for realizing high-Q MTD and may find exciting applications in boosting light–matter interactions.