Ester Groups Research Articles

Improving the behavior of thermoplastic starch with the addition of gum Arabic: Antibacterial, mechanical properties and biodegradability

The incorporation of different amounts of Gum Arabic (GA) in thermoplastic starch (TPS) obtained by extrusion and subsequent thermocompression has been studied. The sheets have been characterized by means of XRD, FTIR, TGA, moisture content, SEM, mechanical properties, antimicrobial activity and biodegradability via composting. The FTIR analysis of the sheets shows the presence of ester groups, while the TGA shows the presence of new processes and a residue much higher than expected is obtained. No changes in crystallinity are observed by XRD. The inclusion of GA confers antimicrobial properties to thermoplastic starch against the Gram + and Gram – bacteria studied even at the smaller concentrations. For a low GA content (0.5 and 1 g GA/100 g TPS) a homogeneous material is observed by SEM, as well as an important increase in tensile strength, modulus and deformation at break, which are very interesting properties facing the applicability of this material in single use plastics which are in contact with food or other consumable goods. At higher contents of GA, hollows and cracks appear in the material, compromising the mechanical properties. In all cases, the inclusion of GA delays the biodegradation process in soil, which can be related to its antibacterial capacity and especially in case of GA concentrations of 2 and 5 g/100 g of TPS with lower humidity of these TPS sheets.

Research on quality marker based on the processing from Aconiti lateralis radix praeparata to Heishunpian.

Aconiti lateralis radix praeparata (ALRP), the sub root of Aconitum carmichaelii Debx., is a traditional Chinese medicine with good pharmacological effects. Heishunpian (HSP), prepared through the process of brine immersing, boiling, rinsing, dyeing, and steaming ALRP is one of the most widely used forms of decoction pieces in clinical practice. This study aims to investigate the mechanisms of component changes and transformations during the processing from ALRP to HSP, and to screen for their quality markers through UHPLC-QTOF-MS analysis. Samples from ALRP to HSP during processing were prepared and analyzed by UHPLC-QTOF-MS. By comparing the differences between before and after each processing step, the purpose of processing and the transformation of components during processing were studied. In addition, multiple batches of ALRP and HSP were determined, and potential quality markers were screened. Through the analysis of ALRP and five key processing samples, 55 components were identified. Immersing in brine, rinsing, and dyeing were the main factors of component loss, and boiling caused a slight loss of components. Some components were enhanced during the steaming process. Combining the screened differences components between multiple ALRP and HSP, 10 components were considered as potential quality biomarkers. This study found that the adjacent hydroxyl groups of the ester group may have a positive impact on the hydrolysis of the ester group, and 10 quality markers were preliminarily screened. It provides a reference for quality control and clinical application of ALRP and HSP.

4-Vinyl Guaiacol: A Key Intermediate for Biobased Polymers.

In order to contribute to the shift from petro-based chemistry to biobased chemistry, necessary to minimize the environmental impacts of the chemical industry, 2-methoxy-4-vinylphenol (4-vinyl guaiacol, 4VG) was used to synthesize a platform of biobased monomers. Thus, nine biobased monomers were successfully prepared. The synthesis procedures were investigated through the green metrics calculations in order to quantify the sustainability of our approaches. Their radical homopolymerization in toluene solution initiated by 2,2'-azobis(2-methylpropionitrile) (AIBN) was studied and the effect of residual 4VG as a radical inhibitor on the kinetics of polymerization was also explored. The new homopolymers were characterized by proton nuclear magnetic resonance (1H-NMR) spectroscopy, size exclusion chromatography and thermal analyses (dynamical scanning calorimetry DSC, thermal gravimetric analysis TGA). By varying the length of the alkyl ester or ether group of the 4VG derivatives, homopolymers with Tg ranging from 117 °C down to 5 °C were obtained. These new biobased monomers could be implemented in radical copolymerization as substitutes to petro-based monomers to decrease the carbon footprint of the resulting copolymers for various applications.

Integration of Functional Groups to Enhance the Solubility and Stability of Viologen in Aqueous Organic Redox Flow Batteries.

The chemical stability and energy density of redox couples are crucial factors in enhancing the durability and cost competitiveness of aqueous flow batteries. This study proposed integrating functional groups to viologen anolyte to increase its solubility and, consequently, energy density and stability for prolonged performance. Specifically, sulfonate and ester groups were selectively incorporated at the nitrogen sites of viologen to enhance solubility, leveraging their asymmetry and double hydrophilicity. Furthermore, an alpha-methyl group was introduced between the bipyridine and ester groups to enhance the chemical stability by preventing stacking and dimerization that can lead to irreversible degradation. The modified viologen demonstrated a remarkable solubility of 3.0 M in deionized water, corresponding to a volumetric capacity of 80.404 Ah L-1. Additionally, the designed viologen exhibits outstanding retention of 92.4% after 200 cycles with a minimal capacity fading rate of 0.055% per cycle in a 0.1 M flow cell test.

Disazo disperse dyes crosslinked with varied characteristic groups: Their synthesis, characterization, and application on polyester fabrics

We previously synthesized a group of carbamate-linked disazo disperse dyes that showed excellent fastness properties on polyester fabric by using the thermosol dyeing process. However, the color yield of the dyed fabric was not sufficiently high to be accepted by users, especially when using a high-temperature dyeing process. To further optimize the structures of disazo disperse dyes and observe the effect of the linking groups on the dyeing properties, in this work, we used p-phenylene diisocyanate or terephthaloyl chloride as crosslinking agents and aniline derivatives containing hydroxyl or amino groups as reactants to synthesize four disazo disperse dyes containing various characteristic groups, including ester, carbamate, amide, and urea groups. The structures of these new dyes were characterized by nuclear magnetic resonance, mass spectrometry, and Fourier-transform infrared spectroscopy analyses. The spectral properties in an N,N-dimethylformamide solvent were measured, the structural parameters of the dyes were calculated using the density functional theory method, and the dyeing properties were investigated by using high-temperature and thermosol dyeing processes, and also compared with these for the commercial dye, C·I.Disperse Red 153. The results showed that there were slight differences in the molar extinction coefficients and maximum absorbance wavelengths between the new dyes, but the effects of characteristic groups on the structural features and the dyeing properties of the new dyes were significant. The ester-linked dye (D1) had the highest color depth when a high-temperature process was used in the presence of 50 mL/L of methyl salicylate because of its highest ClogP (N-octanol/water partition coefficient) value, corresponding to its more hydrophobic nature, while all the other dyes produced lower color yields. When used in the thermosol dyeing process, the carbamate-linked dye (D2) yielded the highest color depth, followed by the ester-linked dye (D1) and amide-linked dye (D3), and the urea-linked dye (D4) produced the lowest color depth due to its highest hydrophilic properties. Finally, it was demonstrated that the new dyes had excellent color fastnesses except for the urea-linked dye (D4), which exhibited a slightly lower light fastness, While the commercial dye used as the control showed a relatively poor sublimation and light fastness although its color depth and chroma value performed slightly better than the new dyes as used by the thermosol dyeing process.

Low-κ, low CTE, high-temperature epoxy resin with high storage modulus based on spirobisindane for high-frequency electronic circuit field

High-temperature thermosetting resin with low dielectric constant (κ), low thermal expansion coefficient (CTE), and high modulus are drawing more and more attention from scientists and engineers in the field of the high-frequency circuit, 5G and 6G communication networks to improve the signal transmission speed. Epoxy resin, as one of the important thermosetting resin members, possesses excellent properties such as heat resistance, cohesiveness, and reactivity. However, Epoxy resin was usually mixed with different inorganic fillers to meet the above requirements, especially to decrease the κ and CTE. In this work, a new class of spirobisindane epoxy resin monomer (TSDEP) was synthesized by a classic two-step method based on 3,3,3′,3′-tetramethyl-1,1′-spirobisindane-6,6′-diol (TSD). Due to the highly distorted rigid structure of TSD, the movement of the TSDEP molecular segment is subject to more restrictions after being cured, and the free volume will increase. After cured by 4,4′-diamino diphenyl sulfone (DDS), the TSDEP/DDS resin exhibited many desirable physical properties, e.g., low dielectric constant (∼3.45, 1 MHz), low dielectric loss (∼0.025, 1 MHz), low coefficient of thermal expansion (CTE, 72 ppm/ °C, 35–150 °C), high glass transition temperature (Tg > 241 °C) and high thermal stability (Td5%∼400 °C). Furthermore, TSDEP/DDS exhibited excellent mechanical rigidity with a storage modulus of ∼ 3.1 GPa. Compared with TSDEP/DDS, 4-methylhexahydrophthalic anhydride (MHHPA) cured TSDEP system showed lower κ (∼3.09) and dielectric loss (0.015) due to weaker polar ester groups instead of more polar hydroxy groups.

Detoxification of Mycotoxin Patulin by the Yeast Kluyveromyces marxianus YG-4 in Apple Juice.

Patulin (PAT) is a mycotoxin produced by Penicillium species, which often contaminates fruit and fruit-derived products, posing a threat to human health and food safety. This work aims to investigate the detoxification of PAT by Kluyveromyces marxianus YG-4 (K. marxianus YG-4) and its application in apple juice. The results revealed that the detoxification effect of K. marxianus YG-4 on PAT includes adsorption and degradation. The adsorption binding sites were polysaccharides, proteins, and some lipids on the cell wall of K. marxianus YG-4, and the adsorption groups were hydroxyl groups, amino acid side chains, carboxyl groups, and ester groups, which were combined through strong forces (ion interactions, electrostatic interactions, and hydrogen bonding) and not easily eluted. The degradation active substance was an intracellular enzyme, and the degradation product was desoxypatulinic acid (DPA) without cytotoxicity. K. marxianus YG-4 can also effectively adsorb and degrade PAT in apple juice. The contents of organic acids and polyphenols significantly increased after detoxification, significantly improving the quality of apple juice. The detoxification ability of K. marxianus YG-4 toward PAT would be a novel approach for the elimination of PAT contamination.

Discovery of Potent DAG-Lactone Derivatives as HIV Latency Reversing Agents.

Toward human immunodeficiency virus type-1 (HIV-1) cure, cells latently infected with HIV-1 must be eliminated from people living with HIV-1. We previously developed a protein kinase C (PKC) activator, diacylglycerol (DAG)-lactone derivative 3, with high HIV-1 latency-reversing activity, based on YSE028 (2) as a lead compound and found that the activity was correlated with binding affinity for PKC and stability against esterase-mediated hydrolysis. Here, we synthesized new DAG-lactone derivatives not only containing a tertiary ester group or an isoxazole surrogate but also several symmetric alkylidene moieties to improve HIV-1 latency reversing activity. Compound 9a, with a dimethyl group at the α-position of the ester group, exerted twice higher HIV-1 latency reversing activity than compound 3, and compound 26, with the isoxazole moiety, was significantly active. In addition, DAG-lactone derivatives with moderate hydrophobicity and potent biostability showed high biological activity.

Bleomycin‐dependent DNA damage, erythrocyte hemolysis, antitumor MTT assay, and antimicrobial activity studies for Cd (II), Mn (II), Zn (II), Cr (III), and Fe (III) complexes of a multidentate carbohydrazone ligand

Cd (II), Mn (II), Zn (II), Cr (III), and Fe (III) complexes of a carbohydrazone ligand H4EBC, prepared by the reaction of ethyl acetate and carbohydrazide, have been prepared and fully characterized. The ligand H4EBC acted as a bidentate carbohydrazone with Cd (II) and coordinated through the nitrogen of both (‐NH) and (C=N)azomethine groups, while with Mn (II) and Zn (II), it acted as a neutral NN bidentate ligand. In complexes with Fe (III) and Cr (III), H4EBC acts a bi‐negative tetra‐dentate, coordinating through the oxygen atoms of both enolized (C=O)ester groups and the nitrogen of both (C=N)azomethine groups. To illustrate the proposed geometries and chemical reactivity of the compounds, we employed DFT calculations. Additionally, thermal studies provided insights into the stability of the isolated compounds. Interestingly, the prepared complexes demonstrated emission broad bands at various wavelengths, indicating ligand to metal charge transfer. Based on the inhibition of DNA destruction, the complexes can be ranked in the following order: [Cd(H4EBC)Cl2].2H2O] (1) > H4EBC > [Mn(H4EBC)Cl2)].(H2O)2] (2) > [Zn(H4EBC)Cl2].2H2O] (3) > [Fe(H2EBC)Cl(H2O)].H2O (5) > [Cr(H2EBC)Cl (H2O)].H2O (4). Regarding erythrocyte hemolysis, the order of effectiveness can be arranged as follows: (2) > (1) > H4EBC > (5) > (3) > (4). We further investigated the compounds for their potential in antitumor activity against two cell lines and antimicrobial behavior.

Hapten synthesis, monoclonal antibody production and immunoassay development for analyzing spiropidion residues

Spiropidion developed by Syngenta shows high insecticidal and acaricidal activity against a wide range of sucking pests. In this study, according to the structure of spiropidion, two haptens were synthesized by introducing carboxyl groups from the ester group. After cell fusion, a monoclonal antibody (mAb 8B5) of spiropidion was obtained. The IC50 of the established heterologous indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) was 7.36 ng/mL, and its working range was 1.75–34.92 ng/mL. The average recoveries were 76.05–124.78% in the Yangtze River and citrus samples. Moreover, the ic-ELISA results of 15 citrus samples agreed well with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Overall, the established ic-ELISA could be applied for the spiropidion residue monitor in food and agricultural samples.

A novel poly(2-hydroxyethyl acrylamide) copolymer for the fabrication of transparent antifogging coatings on polycarbonate substrates

Although polycarbonate (PC) is widely used in various applications, its inherent hydrophobicity limits its potential in applications that require high light transmittance due to surface fog caused by changes in temperature or humidity in the environment. This work presents a facile method to fabricate transparent antifogging coatings on PC substrates based on poly(2-hydroxyethyl acrylamide-co-2-aminoethyl methacrylate) (P(HEAA-co-AEMA)), in which the AEMA segments have an amino functional group that can react with the ester group on the surface of the PC substrate to form covalent urethane bonds during the heat curing process, avoiding the problems of coating susceptibility to mechanical damage, ease of peeling, etc. Moreover, HEAA units are employed as hydrophilic groups, providing antifogging performance. These antifogging coatings can be easily obtained by coating P(HEAA-co-AEMA) copolymers on PC substrates at room temperature and then curing them by thermal treatment. These transparent coatings exhibited excellent antifogging and self-cleaning performance. Furthermore, the coatings exhibited good adhesion in the cross-cut test and thermal stability in the hot water resistance test. Therefore, the present P(HEAA-co-AEMA) copolymer coatings are promising for practical antifogging applications.

Sugar-Based Surfactants: Effects of Structural Features on the Physicochemical Properties of Sugar Esters and Their Comparison to Commercial Octyl Glycosides.

Two series of sugar esters with alkyl chain lengths varying from 5 to 12 carbon atoms, and with a head group consisting of glucose or galactose moieties, were synthesized. Equilibrium surface tension isotherms were measured, yielding critical micellar concentration (CMC) surface tensions at CMC (γcmc) and minimum areas at the air-water interface (Amin). In addition, Krafft temperatures (Tks) were measured to characterize the ability of molecules to dissolve in water, which is essential in numerous applications. As a comparison to widely used commercial sugar-based surfactants, those measurements were also carried out for four octyl d-glycosides. Impacts of the linkages between polar and lipophilic moieties, alkyl chain lengths, and the nature of the sugar head group on the measured properties were highlighted. Higher Tk and, thus, lower dissolution ability, were found for methyl 6-O-acyl-d-glucopyranosides. CMC and γcmc decreased with the alkyl chain lengths in both cases, but Amin did not appear to be influenced. Both γcmc and Amin appeared independent of the ester group orientation. Notably, alkyl (methyl α-d-glucopyranosid)uronates were found to result in noticeably lower CMC, possibly due to a closer distance between the carbonyl function and the head group.

An injectable and retrievable bioartificial pancreas fabricated by time-sequentially assembling islets-laden microgels for minimally invasive treatment of type 1 diabetes

Islets transplantation is a promising method to treat type 1 diabetes. Unfortunately, current islet encapsulation and transplantation strategies are difficult to simultaneously achieve the minimally invasive transplantation, rapid mass transportation, accurate positioning, long-term stability and easy retrieval. Herein, we present a novel strategy for islet encapsulation and transplantation that integrates the advantages of microencapsulation and macroencapsulation. Specifically, islets are first encapsulated in methacrylated carboxymethyl chitosan (CMCSMA) microgels by droplet microfluidic technology, and then oxidized sodium alginate-succinimide ester (OSA-NHS) as the assembling agent is added to time-sequentially assemble the islets-laden microgels. The as-formed microgel assembly (MA-CHO/NHS), or namely bioartificial pancreas, is injectable before transplantation due to the quick formation of dynamic Schiff base bonds, and becomes quite stable after transplantation with the slow formation of stable amide bonds. In addition, the interconnected micropores inside the microgel assembly is beneficial for mass transportation, and the abundant aldehyde and succinimide ester groups on assembling agent ensures good tissue adhesion. This injectable, tissue-adhesive, microporous, positionable and retrievable bioartificial pancreas can reverse the blood glucose levels of diabetic mice from hyperglycemia to normoglycemia for at least 90 days, and thus shows a broad application prospect in the field of diabetes treatment.

Cyсlopentadienone and Pyrone Derivatives as Precursors of Electron-Deficient Cycloheptatrienes: Quantum Chemical Investigation and Synthesis

AbstractUnstable tetra(methoxycarbonyl)cyclopentadienone was investigated in the synthesis of electron-deficient cycloheptatrienes via [4+2]-cycloaddition/cycloelimination reaction with cyclopropenes. The use of its stable dimer did not afford the product although similar reactions with alkynes have been reported. Quantum chemical calculation revealed that cyclopentadienone is not generated from the dimer and the reaction with alkynes proceeds via a more complicated cycloelimination/cycloaddition/cycloelimination cascade. However, the formation of cycloheptatrienes was found favorable over the formation of the dimer. Therefore, the trapping of tetra(methoxycarbonyl)cyclopentadienone upon formation was successful to give cycloheptatrienes with five ester groups. The use of methyl coumalate as a four-electron component was successful with cyclopropenes containing only one ester group to afford only two ester groups in the product.

Production of biodiesel from waste cooking oil using a novel surface-functionalized CaMoO4/ TiO2 solid catalyst

This study involves the synthesis of a mesoporous CaMoO4/TiO2 solid catalyst through the impregnation method. The catalyst, known for its novelty, efficiency, and recyclability, was thoroughly characterized using various techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX), Thermogravimetric Analysis (TGA), Brunauer-Emmett-Teller (BET), and Barrett-Joyner-Halenda (BJH) studies. Waste cooking oil is analysed using FTIR spectroscopy for its free fatty acid content. In addition, the specific catalytic activities are investigated under a variety of reaction conditions. A yield of 95.6 % is achieved under the standard trans esterification reaction operating parameters such as catalyst loading of 4 wt %, methanol to waste cooking oil molar ratio of 15:1 (v/v), reaction duration of 70 min, reaction temperature of 55 °C, stirring speed of 270 rpm, and temperature of calcination as 650 °C. The reaction kinetics (pseudo first order) is also studied. Solid catalysts can also be reused up to five successive times. Biodiesel is characterized by FTIR and 1H NMR studies to examine the presence of functional and methyl ester groups respectively, and the extracted biofuel met the specifications of ASTM D 6751 norms for standard diesel fuel.

Preparation and Properties of Epoxy Adhesives with Fast Curing at Room Temperature and Low-Temperature Resistance.

Developing a highly efficient multifunctional epoxy adhesive is still an enormous challenge, which can rapidly cure at room temperature and has excellent low-temperature resistance performance and is crucial for the epoxy adhesive and electrical sealing fields during severe cold seasons. Herein, diglycidyl phthalate (DP) was synthesized with phthalic anhydride (PA) and epichlorohydrin (ECH) to enhance the curing rate and low-temperature resistance of bisphenol A diglycidyl ether (DGEBA) adhesive. The modified DP/DGEBA adhesives were systematically analyzed by gel time, mechanical properties, and aging resistance (time, temperature, and dry/wet treatment). The results showed that DP with highly active ester groups significantly accelerates the curing speed of DP/DGEBA. DP's rigid aromatic ring-benzene ring and flexible group-ester group gave the adhesive better low-temperature resistance. When the addition of DP was 10 wt % (based on the mass of DGEBA), the gel time of DP/DGEBA epoxy adhesives was reduced by 58 min compared to unmodified DGEBA epoxy adhesive, and after aging at low temperature (-20 °C) for 7 days, the tensile shear strengths of polyvinyl chloride (PVC) and aluminum plate increased by 76.2 and 80.6%, respectively. The results of non-isothermal curing kinetics and dynamic mechanical analysis suggested that when the amount of DP was 10 wt %, the reaction activation energy of DP/DGEBA epoxy adhesive decreased by 4.0%, and the cross-linking density increased by 8.9%. Moreover, the toughness of the modified adhesive was also improved. This study opens up a feasible way for the development of a low temperature-resistant epoxy adhesive cured rapidly at room temperature in practical application.

Turn-on Coumarin Precursor: From Hydrazine Sensor to Covalent Inhibition and Fluorescence Detection of Rabbit Muscle Aldolase.

Hydrazine, a highly toxic compound, demands sensitive and selective detection methods. Building upon our previous studies with pre-coumarin OFF-ON sensors for fluoride anions, we extended our strategy to hydrazine sensing by adapting phenol protecting groups (propionate, levulinate, and γ-bromobutanoate) to our pre-coumarin scaffold. These probes reacted with hydrazine, yielding a fluorescent signal with low micromolar limits of detection. Mechanistic studies revealed that hydrazine deprotection may be outperformed by a retro-Knoevenagel reaction, where hydrazine acts as a nucleophile and a base yielding a fluorescent diimide compound (6,6'-((1E,1'E)-hydrazine-1,2diylidenebis(methaneylylidene))bis(3(diethylamino)phenol, 7). Additionally, our pre-coumarins unexpectedly reacted with primary amines, generating a fluorescent signal corresponding to phenol deprotection followed by cyclization and coumarin formation. The potential of compound 3 as a theranostic Turn-On coumarin precursor was also explored. We propose that its reaction with ALDOA produced a γ-lactam, blocking the catalytic nucleophilic amine in the enzyme's binding site. The cleavage of the ester group in compound 3 induced the formation of fluorescent coumarin 4. This fluorescent signal was proportional to ALDOA concentration, demonstrating the potential of compound 3 for future theranostic studies in vivo.

Secondary degradation of bio-oil degraded crumb rubber and preparation of stable degraded crumb rubber modified asphalt

Using bio-oil to desulfurize and degrade crumb rubber (CR) significantly enhances the compatibility between CR and asphalt, improving the workability of CR-modified asphalt and providing environmental and economic benefits. However, the secondary degradation of bio-oil degraded crumb rubber (ODR) in asphalt hinders the stability of ODR-modified asphalt. To optimize the mechanical performance of ODR-modified asphalt, the secondary degradation behaviors of ODR were investigated. The degree of CR degradation was determined by solubility testing, while the rheological properties and chemical structures of ODR-modified asphalt were characterized through rotational viscometer, dynamic shear rheometer, bending beam rheometer, and Fourier transform infrared spectrometer. The processes for preparing stable ODR modifier and ODR-modified asphalt were proposed to mitigate the damage caused by bio-oil and degraded CR to the high temperature mechanical properties of asphalt. The results show that at lower processing temperatures for ODR-modified asphalt, the volatilization of light components is predominant, while higher processing temperatures prompt secondary degradation of ODR. By stirring at 280°C for 2 hours to acquire moderately degraded CR, and then concentrating it at 220°C for 2 hours, a stable ODR less susceptible to secondary degradation can be obtained. The workability, temperature sensitivity, and low temperature cracking resistance of stable ODR-modified asphalt improve significantly. The reduction of ester group and increase in aromaticity restore the high temperature deformation resistance of ODR-modified asphalt. Further, the inclusion of composite SBS extends the range of rheological properties in ODR-modified asphalt, bolstering the application potential of ODR in asphalt pavement.

Probing the stability and quality of the cellulose-based Pickering emulsion containing sesamolin-enriched sesame oil by chemometrics-assisted ATR-FTIR spectroscopy

This study presents the employment of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection and principal component analysis (PCA) to analyze the stability of a Pickering emulsion stabilized by carboxylated-cellulose nanocrystal (cCNC) comprising sesame oil phases with or without sesamolin. FTIR measurements identified an intermolecular hydrogen bond between the ester group of the triglyceride and the carboxyl group of the cCNC to create the emulsion droplet. The spectral bands from the hydroxyl group vibration (3700–3050 cm−1), carbonyl (1744 cm−1), CO groups of the ester triglyceride and cCNC (1160–998 cm−1) markedly discriminated between stabilized and destabilized emulsions. The PCA of FTIR spectra detected the change of molecular interaction during storage according to creaming, aggregation, and coalescence and changes in physicochemical parameters such as droplet size, refractive index, and zeta potential. Hence, PCA enabled the observation of the destabilization of emulsion in real-time.

STUDYING THE INFLUENCE OF NEW COMBINED INHIBITORS ON THE PROCESSES OF CORROSION AND SALT DEPOSITION IN OIL-FIELD EQUIPMENT

Aggressive salts contained in formation waters accelerate the processes of corrosion and salt deposition in oilfield equipment, which leads to unforeseen accidents, contamination of soil and groundwater with harmful substances, as a result of which the ecological balance of the environment is disrupted. Corrosion and scaling that occur during oil production create difficulties during the operation of wells, and, consequently, increase the cost of produced oil.This article covers the results of studies concerning two compositions developed from technical phosphatide - an emulsion obtained by hydration of vegetable oils, as well as sodium hexametaphosphate, ammophos and polypropylene glycol bottoms. When vegetable oils are treated with water and steam (hydration process), the phospholipids contained in the oils combine with water and are released in the form of precipitates called phosphatide emulsions. Such emulsions consist of 45–75 % water, and the rest is phospholipids in the vegetable oil sediment.Technical phosphatides are a group of esters that contain a phosphoric acid residue associated with an amino alcohol. They are natural surfactants and are non-toxic.Preliminary studies have shown that each of the chemical compounds included in the developed reagents has certain inhibitory properties, but when formulated, these compounds provide a synergistic effect.Based on the results of laboratory studies, it was found that at an optimal concentration of reagents of 200 mg/l, the developed compositions provide protection of equipment from corrosion destruction by 94–95 %, and from scaling by 87–88 %. The developed mixed-type inhibitors at optimal concentrations equally effectively inhibit both cathodic and anodic processes on the electrode.The use of these inhibitors leads to the prevention of steel corrosion in the two-phase oil-electrolyte system, as well as to a significant reduction in the rate of scaling.The proposed new compositions can be used in oil wells and in-field transport systems, as well as in reservoir pressure maintenance systems to protect against corrosion and scale deposits.Field tests of the corrosion inhibitor were carried out in deep pumping wells at the Bibieybatneft oil and gas production department. Tests have shown that as a result of using the inhibitor, the protective effect at a concentration of 200 mg/l was 89–90 %, and the effect of salt deposition was 70 %.