An equalizer architecture based on asynchronous sampling is described. The circuit implementation is a hybrid feed-forward equalizer (FFE) using three digital postcursor taps realized via level-crossing samplers (LCSs) and inverter-based delays. Utilizing a current mode logic (CML)-based summer stage, an analog main tap and digital postcursor taps are combined into an inductively tuned resistor load. With a 0.67-mV-rms simulated output-referred noise, the FFE has better noise performance than a conventional continuous-time linear equalizer (CTLE) and a slicer/latch-based decision feedback equalizer (DFE) circuit. Moreover, it exhibits very good linearity and group delay performance suitable for an equalizer. Using inverter-based delays enables area efficiency as well as the capability to tune the delay across process voltage and temperature (PVT) variations. Since the FFE is an event-driven combinational logic based on the incoming data, it does not require synchronous sampling coming from a high-speed clock and data recovery (CDR), and it is advantageous for high-speed and multirate operation as its power consumption scales with the data rate. Fabricated in 40-nm CMOS technology, the hybrid FFE achieves energy per bit of 2.7 pJ/bit with a 20-dB Nyquist insertion loss link at the 28.57-Gb/s nonreturn to zero (NRZ) data rate.