Ground State Absorption Research Articles

Unveiling the mechanism of reverse saturable absorption in zinc tetrapyridyl porphyrins

Reverse saturable absorption (RSA) is one of the important mechanism for a molecule showing optical-limiting property. The experiment found that zinc tetrapyridyl porphyrins (ZnTPyP) exhibit distinct RSA characteristics at both 470 nm and 532 nm wavelengths. To understand the origin of the RSA in ZnTPyP, a theoretical analysis based on the linear-response time-dependent density functional theory(LR-TDDFT) for the ground state absorption (GSA) and the pseudo-wavefunction formulation of LR-TDDFT(PWF-TDDFT) for excited states absorption (ESA) were conducted. Experimentally observed RSA in ZnTPyP are well predicted. It is shown that the transitions of S1→S13,14,15,18 are the origin of the observed RSA feature in ZnTPyP. We found that these excited states transitions exhibit intramolecular charge transfer character and the pyridyl groups play an important role in the charge transfer process. It is also noticed that the pyridyl groups results in a red shift for both the GSA and ESA of porphyrin. In addition, the central zinc atom causes the energy gap between the positions with prominent absorption in GSA and ESA increased. These observations indicate that pyridyl groups and central zinc atom play an important role in tuning the spectral window and strength of RSA in the porphyrin complexes. These observations provide guidance for designing novel optical-limiting materials based on the porphyrin derivatives.

Spectral broadening and vibronic dynamics of the S2 state of canthaxanthin in the orange carotenoid protein

We have performed a series of broadband multidimensional electronic spectroscopy experiments to probe the electronic and vibrational dynamics of the canthaxanthin chromophore of the Orange Carotenoid Protein (OCP) from Synechocystis sp. PCC 6803 in its photoactivated red state, OCPR. Cross-peaks observed below the diagonal of the two-dimensional electronic spectrum indicate that absorption transitions prepare the bright S2 state of the ketocarotenoid canthaxanthin near to a sequence of conical intersections, allowing passage to the dark S1 state via the Sx intermediate in <50 fs. Rapid damping of excited-state coherent wavepacket motions suggests that the branching coordinates of the conical intersections include out-of-plane deformation and C=C stretching coordinates of the π-conjugated isoprenoid backbone. The unusual proximity of the Franck–Condon S2 state structure to the conical intersections with Sx and S1 suggests that the protein surroundings of canthaxanthin prepare it to function as an excitation energy trap in the OCPR–phycobilisome complex. Numerical simulations using the multimode Brownian oscillator model demonstrate that the ground-state absorption spectrum of OCPR overlaps with the fluorescence emission spectrum of allophycocyanin due to spectral broadening derived especially from the intramolecular motions of the canthaxanthin chromophore in its binding site.

Advanced AIE Materials for Environmental Monitoring: Selective Sensing of Thorium(IV) in Aquatic Systems.

Thorium (Th) is commonly used in various applications, but its long-term exposure poses health risks, necessitating its detection in aqueous environments. Traditional methods such as inductively coupled plasma mass spectrometry are sensitive but require complex instrumentation. Optical sensors, particularly fluorometry-based methods, are simpler, cost-effective, and selective. However, developing effective aggregation-induced emission (AIE) turn-on sensors for Th(IV) requires water-soluble fluorophores with a low background fluorescence. In the present work, we report a turn-on detection method for Th(IV) based on the AIE of the fluorophore tetra(4-sulfophenyl) ethylene (SuTPE). Th(IV)-induced aggregation of SuTPE and the simultaneous drastic enhancement of the emission property of SuTPE have been utilized for the selective sensing of Th(IV) in 100% aqueous media. The sensing mechanism was explored using ground-state absorption, steady-state and time-resolved emission, FTIR, DLS, SEM, AFM and quantum chemical studies of the SuTPE-Th(IV) complex. The selectivity of the present probe toward Th(IV) ions has been established by studying the interference of several metal ions, including lanthanides and uranyl ions. The LOD for Th(IV) was estimated to be 240 nM (56 ppb). The performance of the probe was demonstrated in tap water and diluted seawater matrixes. This work provides a significant advance for Th(IV) detection in aqueous environments, with implications for environmental monitoring and health safety.

Interferometric excitation fluorescence lifetime imaging microscopy

Fluorescence lifetime imaging microscopy (FLIM) is a well-established technique with numerous imaging applications. Yet, one of the limitations of FLIM is that it only provides information about the emitting state. Here, we present an extension of FLIM by interferometric measurement of fluorescence excitation spectra. Interferometric Excitation Fluorescence Lifetime Imaging Microscopy (ixFLIM) reports on the correlation of the excitation spectra and emission lifetime, providing the correlation between the ground-state absorption and excited-state emission. As such, it extends the applicability of FLIM and removes some of its limitations. We introduce ixFLIM on progressively more complex systems, directly compare it to standard FLIM, and apply it to quantitative resonance energy transfer imaging from a single measurement.

High-efficiency 2.3 µm Tm:YLF laser based on 0.79 µm and 1.05 µm dual-wavelength pumping scheme.

A high-efficiency Tm:YLF laser at 2.3 µm is demonstrated based on a dual-wavelength pumping scheme with 790 nm LD and a tunable Yb:CALGO laser at around 1.05 µm. When employing single-wavelength pumping at 790 nm, a maximum output power of 3.1 W is obtained, while the maximum output powers of 0.35 W and 0.25 W are achieved for single-wavelength up-conversion pumping at 1055 nm and 1041 nm, respectively. By using 790 nm and 1055 nm dual-wavelength pumping regime, the maximum output power is enhanced to be 3.52 W, which is the highest output power ever achieved from the 2.3 µm Tm:YLF lasers, to the best of our knowledge. The output power of 3.52 W achieved by dual-wavelength pumping exceeds the sum of output powers obtained with the separate single-wavelength pumping at 790 nm and 1055 nm, which well shows that the ground state absorption process 3H6→3H4 under intense 790 nm pumping would induce a significant accumulation of Tm3+ ions on metastable level 3F4 via cross-relaxation process, greatly promoting the excited-state absorption process 3F4→3F2,3 and enhancing the 2.3 µm radiation.

Single-Band Ratiometric Thermometry Strategy Based on the Completely Reversed Thermal Excitation of O2- → Eu3+ CTB Edge and Eu3+ 4f → 4f Transition.

Single-band ratiometric (SBR) strategies present huge potential in the field of luminescence intensity ratio thermometry owing to their excellent signal discrepancy and appealing simplicity. Herein, we employ the approach of Na replacing Li in the LiYGeO4:Eu3+ phosphor to regulate the thermal stability of the O2- → Eu3+ charge-transfer band (CTB) and obtain significant thermal enhancement of luminescence under CTB edge excitation. Combined with the obvious thermal quenching of luminescence under ground-state absorption excitation, the ratio of the single emission band increases by 18 times when the temperature increases from 300 to 570 K. Therefore, such excitation-wavelength-dependent diametrically opposite thermal luminescence behaviors enabled SBR thermometry, whose maximum relative sensitivity can reach up to 3.6% K-1. We demonstrate that the O2- → Eu3+ CTB thermal red-shifts and enhancements are particularly attractive for SBR thermometry with high sensitivity by utilizing the diametrically reversed thermal excitation between the O2- → Eu3+ CTB edge and the 4f → 4f transition of Eu3+. These advances have opened up a novel horizon for the development of high relative sensitivity and performance of the SBR thermometry strategy.

Regulating thermometric properties of single-band ratiometric luminescent thermometers based on Eu3+-activated Y2W3O12·3H2O nanoparticles via controlling doping content and excitation model

Series of Eu3+-activated Y2W3O12·3H2O nanoparticles were designed to realize high-sensitive optical thermometry. The resultant nanoparticles can emit bright visible emission from Eu3+ upon the excitation of 296 nm (charge-transfer state (CTS) of O2- → W6+), 394 nm (ground state absorption (GSA)) and 536 nm (excitation state absorption (ESA)), of which the fluorescence intensities were influenced by dopant content. The negative thermal expansion properties of studied nanoparticles were clarified via temperature-dependent X-ray diffraction patterns. Moreover, the thermal quenching behaviors of final products were also investigated through temperature-related emission spectra. Specifically, upon the CTS and GSA processes, the developed nanoparticles underwent significant thermal quenching effect, whereas the thermally enhanced luminescence was observed under ESA process. Herein, through using the single-band ratiometric (SBR) method to investigate the fluorescence intensity ratio of the red emission from 5D0 → 7F2 transition of Eu3+ at high temperature, the thermometric properties of prepared nanoparticles were studied. It was found that maximum absolute and relative sensitivities of Eu3+-activated Y2W3O12·3H2O nanoparticles reached up to 0.061 and 4.944 % K−1, respectively, and they can be regulated by changing Eu3+ dopant and SBR models (i.e., ESA+CTS and ESA+GSA combinations), realizing high-sensitive optical thermometry. Our findings may provide some guidelines for manipulating the thermometric properties of rare-earth ions activated materials and developing new SBR luminescence thermometers.

Modeling of a Single-Band-Ratiometric Sensor Based on Lattice Positive Thermal Expansion in Eu3+-Activated Halide Perovskite Cs2NaEuCl6.

Recently, single-band ratiometric (SBR) thermometry has emerged as an innovative approach to traditional fluorescence thermometry, overcoming uncertainties associated with emission spectrum overlap or scattering while maintaining high spatial resolution and remote monitoring. This paper presents a novel Cs2NaEuCl6 perovskite prepared through a slow-cooling solution method. Additionally, it proposes a temperature sensor model that relies on the thermal quenching of charge-transfer state absorption. Mechanical studies highlight the role of lattice positive thermal expansion in affecting Eu3+ emission. Conversely, a significant emission enhancement is observed upon excitation corresponding to both the ground state and excited state absorption. The distinct luminescent behavior of this Eu3+-activated halide perovskite model makes it suitable for developing a highly sensitive SBR-type sensor with a relative sensitivity (Sr) exceeding 1.5% K-1 and temperature resolution (𝛿T) below 1 K at room temperature. Furthermore, it demonstrates the thermal stability during multiple heating-cooling cycles. Finally, the practical applicability of the proposed SBR model is demonstrated by employing a self-manufactured film sensor that enables precise real-time temperature detection for electronic components. The work is regarded as a significant stride toward the development of cutting-edge and exquisitely sensitive thermometers based on lanthanide-based halide double perovskites.

(Invited) Electronic Doping in Two-Dimensional Semiconductors

Quantum-confined semiconductors provide highly tunable optical and electrical properties for a wide variety of emerging applications. Two-dimensional semiconductors possess tunable bandgaps, high charge carrier mobilities, and strong light-matter interactions that can enable applications in photovoltaics, quantum information processing, and spintronics. Electronic doping, the intentional introduction of controlled charge carrier density and type (electrons or holes) is a fundamental enabler for many emerging applications of two-dimensional semiconductors. While electrostatic doping in transistor geometries is useful for certain applications, it is important to develop additional methods based on e.g. molecular redox doping and substitutional atomic doping that can provide tunable Fermi level control in the absence of an applied bias. In this presentation, I will discuss our efforts to develop such doping strategies for a variety of two-dimensional semiconductors. I will discuss how electronic doping modulates opto-electronic properties, including ground-state absorbance, charge transport, and excited-state dynamics in these 2D semiconductors. These studies provide fundamental insights into the degree to which molecular and substitutional doping strategies can modulate Fermi level, charge transport, and excitonic optical transitions in 2D semiconductors.

Broadband terahertz absorption and Q-switching behavior of 5-chloro-2-nitroaniline (5C2NA) crystals

Abstract Growth of transparent 5-chloro-2-nitroaniline (5C2NA) crystals was achieved through the slow evaporation technique. Analysis via X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy confirmed the crystalline nature of the organic crystals and revealing distinct molecular fingerprints of 5C2NA respectively. UV-VIS and Photoluminescence (PL) spectroscopy were employed to study the material's band gap and ground state absorption respectively. Thermogravimetric analysis (TGA) analysis indicated the stability of the grown crystals up to 211ºC. Dielectric measurements and Urbach plot suggested the presence of fewer defects in 5C2NA crystals. Time domain terahertz spectroscopy was utilized to observe the variation of absorption coefficient and refractive index in the terahertz frequency regime. Nonlinear optical effects such as saturable absorption (SA) and reverse saturable absorption (RSA), are pivotal in the development of all-optical logic gates. The transition between SA and RSA possesses a significant importance in optoelectronic applications. In this study, we investigate the 5C2NA crystal, revealing its ability to exhibit both SA and RSA under Z scan technique with varying pump intensities. The switching properties observed in 5C2NA can be harnessed for applications such as all-optical logic gates, rapid optical switching, optical limiting, mode storage, and more.

Ultraviolet photon upconversion in Er–SiAlON under 1550 nm excitation

SiAlON ceramics are well known for their exceptional mechanical, thermal, and chemical stability, making them ideal for demanding industrial applications such as cutting tools, equipment for molten metal handling, extrusion molds, gas turbine engines, etc. Despite these applications, the potential for photonic applications such as photon upconversion (UC) in SiAlON ceramics remains less explored. This report demonstrates broad spectral photon UC properties in Er-doped SiAlON (Er–SiAlON) ceramics, covering the ultraviolet (UV) to near-infrared (NIR) range upon 1550 nm excitation. The Er–SiAlON ceramic was synthesized by hot press sintering. X-ray diffraction (XRD), transmission electron microscopy (TEM) and elemental mapping results confirmed the stabilization of the α-SiAlON phase by Er3+ ions. Optical spectra showed distinct transitions of Er³⁺ ions and high transparency of over 70 % in the mid-IR range for the sample thickness of 0.49 mm. Under 1550 nm excitation, UC emission spectra revealed UV, violet, blue, green, red, and NIR emissions. The Er³⁺ ions exhibited self-sensitization, acting both as sensitizers and activators for the UC luminescence. Decay curve analysis showed long excited state lifetimes, with ground state absorption (GSA), excited state absorption (ESA), and energy transfer UC (ETU) processes facilitating multi-photon absorption and diverse spectral emissions. Given the inherent mechanical properties of SiAlON ceramics, these findings highlight the potential of Er–SiAlON ceramics for advanced UC photonic devices operating in high-temperature and harsh environments.

Investigations on saturable absorption characteristic of PdS2 and its application to high-peak-power sub-nanosecond intracavity OPO

In this work, a unique pentagonal TMD material, palladium disulfide (PdS2) nanosheets were fabricated by the liquid-phase exfoliation (LPE) process, and the physical characteristics were also investigated. The nonlinear transmittance is measured by the power scanning method and the modulation depth is fitted to be 15.3%. Based on the transmittance curve, the saturable absorption parameters of PdS2 are calculated, including 5.85 × 10−19 cm2 ground-state absorption cross-section, 1.63 × 10−19 cm2 excited-state absorption cross-section, and 683.5 μs excited-state lifetime. By employing both PdS2 as a saturable absorber (SA) and an acousto-optic modulator (AOM), a doubly Q-switched and mode-locked (QML) laser-pumped intracavity KTiOPO4 (KTP) optical parametric oscillator (OPO) was realized. The pulse energy and the pulse width of the Q-switched envelope for signal wave have been measured. At higher pump power, the high-peak-power low-repetition-rate sub-nanosecond mode-locking pulse of signal wave is generated, in which there is only one mode-locked pulse underneath a Q-switched envelope. The measured shortest signal pulse duration is 530 ps, corresponding to a peak power of 337 kW, at an incident pump power of 9.81 W and an acousto-optic modulator (AOM) repetition rate of 1 kHz. In addition, by considering the Gauss distribution of intracavity photon density, a set of coupled rate equations for a doubly QML laser-pumped intracavity OPO was given and the numerical simulations agreed with the experimental results. These results indicate that PdS2 is a promising nonlinear optical material for optical applications in the near-infrared (NIR) region.

Two-photon absorption induced optical limiting action of Ag-doped lanthanum molybdate decorated reduced graphene oxide nanocomposites

In this research, we aimed to investigate the linear and non-linear optical properties of Ag-La2(MoO4)3@RGO nanocomposites. For this purpose, Graphene Oxide (GO) was synthesized by Modified Hummer’s method after which GO was chemically reduced to Reduced graphene oxide (RGO). The nanocomposite Ag-doped La2(MoO4)3 is prepared by a simple and facile co-precipitation method. The prepared nanocomposite was characterized by Fourier transform infrared (FTIR), Ultraviolet-Visible (UV-Vis) absorption, X-ray diffraction (XRD), Scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDX). XRD and EDX analysis indicated the reduction of GO and successful synthesis of Ag-doped La2(MoO4)3 nanocomposite. FESEM images portray the presence of thin layers of graphene sheets and Ag-doped La2(MoO4)3 on the sheets of reduced graphene oxide. Ground state absorption studies show that the reduction of graphene oxide causes a hypsochromic shift in the absorption maxima of the graphene layers. The photoluminescence of Ag- La2(MoO4)3@RGO demonstrates the utmost emission in the UV range caused by the valence band and conduction band's direct transitions in the band gap region. Z-scan method using Nd: YAG laser exposes that both nanocomposite and specific counterparts hold reverse saturable absorption behaviour. The source of optical limiting action is attributed to the excited state absorption process, emerging from the influence of the plasmon resonance state of Ag nanoparticles. Strong nonlinear absorption and lower onset limiting threshold make the Ag-La2(MoO4)3@RGO nanocomposite desirable material for laser safety devices.

Improved near-resonant two photon absorption of α-MnO2 nanowires surface functionalized reduced graphene oxide sheets

The versatile study of graphene derivatives has resurgence of interest on understanding its nonlinear optical response at different nanoscales. Nanostructured manganese dioxide: reduced graphene oxide (MnO2: rGO) hybrids were synthesized by reduction method by varying the content of rGO (5, 10, 15 & 20 wt%). X-ray Photoelectron Spectroscopy studies confirmed the surface functionalization of MnO2 on rGO. Field Emission Scanning Electron Microscopy (FESEM) and High-Resolution Tunnelling Electron Microscopy (HRTEM) witness that with respect to the content of rGO, the morphology of MnO2 varies radically from clusters to nanorods to nanowires over the surface of rGO sheets. Ground state absorption spectra of the hybrids have absorption edge at 268 nm corresponding to combined metal oxide charge transfer between rGO (π-π* transition of CC and n-π transition of C-O bonds) and MnO2 (d-d transition). Moreover, hierarchical MnO2 nanowire network resided on 2D rGO sheets involves broad absorption at the visible spectral domain due to polaron transition as well the localization of π- π* transited electrons that facilitates the probability of occurrence of excited state absorption. Intensity dependent open aperture Z-scan technique of the prepared hybrids using Q-switched Nd: YAG 532 nm nanopulsed laser reveals unusual transitions and enhanced nonlinear absorption. MnO2:(5 wt%) rGO shows saturable absorption (SA) at low intensity and changeover dynamically to reverse saturable absorption (RSA) at higher intensity. MnO2:(10 & 15 wt%) rGO exposes coupled nonlinear absorption (SA + RSA) owing to the combined effect of graphene (π-states) and MnO2 (σ-states). MnO2:(20 wt%) rGO exhibits a stronger RSA ascribed to sequential two photon absorption. The third-order nonlinear absorption coefficient and limiting threshold of MnO2: rGO (20 wt%) are 4.04 ×10-10 m/W and 0.84 ×1012 W/m2, which shows five-fold increase compared to bare rGO and MnO2. The obtained results propose that the optical nonlinearity of MnO2 nanowires surface functionalized rGO sheets can significantly be tuned to meet the requirements for fabricating laser safety devices.

Tetracene Diacid Aggregates for Directing Energy Flow toward Triplet Pairs.

A comprehensive investigation of the solution-phase photophysics of tetracene bis-carboxylic acid [5,12-tetracenepropiolic acid (Tc-DA)] and its related methyl ester [5,12-tetracenepropynoate (Tc-DE)], a non-hydrogen-bonding counterpart, reveals the role of the carboxylic acid moiety in driving molecular aggregation and concomitant excited-state behavior. Low-concentration solutions of Tc-DA exhibit similar properties to the popular 5,12-bis((triisopropylsilyl)ethynl)tetracene, but as the concentration increases, evidence for aggregates that form excimers and a new mixed-state species with charge-transfer (CT) and correlated triplet pair (TT) character is revealed by transient absorption and fluorescence experiments. Aggregates of Tc-DA evolve further with concentration toward an additional phase that is dominated by the mixed CT/TT state which is the only state present in Tc-DE aggregates and can be modulated with the solvent polarity. Computational modeling finds that cofacial arrangement of Tc-DA and Tc-DE subunits is the most stable aggregate structure and this agrees with results from 1H NMR spectroscopy. The calculated spectra of these cofacial dimers replicate the observed broadening in ground-state absorption as well as accurately predict the formation of a near-UV transition associated with a CT between molecular subunits that is unique to the specific aggregate structure. Taken together, the results suggest that the hydrogen bonding between Tc-DA molecules and the associated disruption of hydrogen bonding with solvent produce a regime of dimer-like behavior, absent in Tc-DE, that favors excimers rather than CT/TT mixed states. The control of aggregate size and structure using distinct functional groups, solute concentration, and solvent in tetracene promises new avenues for its use in light-harvesting schemes.

Photoinduced Magnetic Exchange-Jump Promotes Ground State Biradical Electron Spin Polarization.

Photoinduced electron spin polarization (ESP) is reported in the electronic ground states of three Pt(II) complexes comprised of two S = 1/2 nitronyl nitroxide (NN) radicals attached through different length para-phenylethynyl bridges to the 3,6 positions of a catecholate (CAT, donor) and 4,4'-di-tert-butyl-2,2'-bipyridine (bpy, acceptor). Complexes 1-3 have from 17 to 41 bonds separating NN radicals and display cw-EPR spectra consistent with |JNN-NN| ≫ |aN|, |JNN-NN| ≥ |aN|, and |JNN-NN| < |aN|, respectively, where JNN-NN is the magnetic exchange coupling between NN radicals in the electronic ground state, and aN is the isotropic 14N hyperfine coupling constant. Light-induced transient EPR spectra characterized as enhanced ground-state absorption were observed for all three complexes using 532 nm pulsed laser excitation into the ligand-to-ligand charge transfer (LL'CT) band of the (CAT)Pt(bpy) chromophore. The magnitude of the observed ESP increases in the order 1 < 2 < 3 and is inversely correlated with the magnitude of ground-state JNN-NN. In addition to the experimental observation of net absorptive polarization in 1-3, light excitation also produces multiplet polarization in 2. Since the weak dipolar coupling leads to a strong spectral overlap of the absorptive and emissive components, the multiplet polarization is not observed in 1 and 3 and is very weak in 2. The ability to spin-polarize multiple radical spins with a single photon is anticipated to advance new photoinduced multi qubit/qudit ESP protocols for quantum information science applications.

Intramolecular charge transfer enhanced optical limiting in novel hydrazone derivatives with a D1-D-Ai-π-A structure.

The present paper investigates one of the hydrazone derivatives (BTH with a D-π-A structure) based on density functional theory. With the computation results of ground state absorption (GSA), excited-state absorption (ESA) and multi-photon absorption (MPA), the optical limiting effect observed in the experiment for the BTH molecule can be well predicted and elucidated by the MPA-ESA mechanism. The analysis of the hole-electron and the electron density differences between two transition states reveal that the main transitions involved in the GSA and ESA of BTH could be recognized as local excitation. Based on these observations, four novel hydrazone derivatives based on the BTH unit with a D1-D-Ai-π-A structure were designed to promote intramolecular charge transfer (ICT). It shows that the ICT effect is well improved by adding the D1 and Ai units. Compared with the original BTH molecule, the main bands of GSA and ESA of D1-D-Ai-π-A molecules are both red-shifted. In addition, GSA, ESA and MPA probabilities are all improved because the obvious charge transfer character results in the transition dipole moment change from localized to delocalized. Accordingly, the optical limiting effect in these hydrazone derivatives is well enhanced. These observations provide guidance for designing novel optical limiting materials based on the hydrazone derivatives.

Investigation of the exact spin channels in laser-induced spin dynamics in two mononuclear Cu(II) complexes.

In the quest to harness the potential of nanospintronic applications, we analyze and investigate the spin channels for the ultrafast spin dynamics in mononuclear Cu2+(tdp)Cl2 (Cutdp) and Cu2+(tdp)Cl2·MeCN (Cutdp·MeCN) using a high-level ab initio many-body theory. In that spirit, we select two slightly different polymerizations arising from one parent complex. We establish the difference in magnetic behavior between the two complexes which arises solely from the geometrical differences. We calculate the static magnetic properties, such as the magnetic anisotropy of the complexes, which is analyzed by means of the magnetic moment of the ground state. The asymmetry of the core Cu-Cl-Cu-Cl axial plane unit is also reflected in the ground state absorption spectra of the two complexes. Comparisons with the experimental data are in good agreement with the exception of one peak in the theoretical calculations for each of the complexes, confirming the reliability of theoretical methods employed. A major finding in this work is the distinction between classical and coherent superpositions of Λ processes. We employ the selective blocking and retention (SBR) technique to find the unique path or paths for spin dynamic scenarios like spin flip and spin transfer. Additionally, we also present two different scenarios in which intermediate states are involved in spin dynamic processes, (i) classical superposition of Λ processes (i.e., there are many unique paths for transition, even with just one intermediate state the transition completes successfully), and (ii) collective coherent superposition of Λ processes (i.e., there is only one path for the transition, which requires more than one intermediate state to be in a specific coherent superposition). As a consequence, we gain insight into the type of correlations (static or dynamic) involved in a particular spin dynamic scenario.

The use of energy looping between Tm3+ and Er3+ ions to obtain an intense upconversion under the 1208 nm radiation and its use in temperature sensing.

The upconversion phenomenon allows for the emission of nanoparticles (NPs) under excitation with near-infrared (NIR) light. Such property is demanded in biology and medicine to detect or treat diseases such as tumours. The transparency of biological systems for NIR light is limited to three spectral ranges, called biological windows. However, the most frequently used excitation laser to obtain upconversion is out of these ranges, with a wavelength of around 975 nm. In this article, we show an alternative - Tm3+/Er3+-doped NPs that can convert 1208 nm excitation radiation, which is in the range of the 2nd biological window, to visible light within the 1st biological window. The spectroscopic properties of the core@shell NaYF4:Tm3+@NaYF4 and NaYF4:Er3+,Tm3+@NaYF4 NPs revealed a complex mechanism responsible for the observed upconversion. To explain emission in the studied NPs, we propose an energy looping mechanism: a sequence of ground state absorption, energy transfers and cross-relaxation (CR) processes between Tm3+ ions. Next, the excited Tm3+ ions transfer the absorbed energy to Er3+ ions, which results in green, red and NIR emission at 526, 546, 660, 698, 802 and 982 nm. The ratio between these bands is temperature-dependent and can be used in remote optical thermometers with high relative temperature sensitivity, up to 2.37%/°C at 57 °C. The excitation and emission properties of the studied NPs fall within 1st and 2nd biological windows, making them promising candidates for studies in biological systems.

Targeted synthesis of gold nanorods and characterization of their tailored surface properties using optical and X-ray spectroscopy.

In recent years, nanophotonics have had a transformative impact on harnessing energy, directing chemical reactions, and enabling novel molecular dynamics for thermodynamically intensive applications. Plasmonic nanoparticles have emerged as a tool for confining light on nanometer-length scales where regions of intense electromagnetic fields can be precisely tuned for controlled surface chemistry. We demonstrate a precision pH-driven synthesis of gold nanorods with optical resonance properties widely tunable across the near-infrared spectrum. Through controlled electrostatic interactions, we can perform selective adsorbate molecule attachment and monitor the surface transitions through spectroscopic techniques that include ground-state absorption spectrophotometry, two-dimensional X-ray absorption near-edge spectroscopy, Fourier-transform infrared spectroscopy, and surface-enhanced Raman spectroscopy. We elucidate the electronic, structural, and chemical factors that contribute to plasmon-molecule dynamics at the nanoscale with broad implications for the fields of energy, photonics, and bio-inspired materials.