GREGOR Fabry-Perot Interferometer Research Articles

Measuring the etalon quality of the GREGOR Fabry–Pérot interferometer

Imaging spectropolarimetry is an important observational tool in solar physics because of fast-cadence spectral scans with high-spectral resolution, large field-of-view, and its inherent suitability for post-facto image restoration. Fabry-P\'erot etalons are the key optical elements of these instruments. Their optical quality critically defines the instrument's performance. The two etalons of the GREGOR Fabry-P\'erot Interferometer (GFPI) were used for more than 10~years, raising questions about the potential deterioration of etalons coatings. We present an assessment of the etalons optical quality, describe the inspection method based on Zernike polynomials, discuss the field dependence of the finesse and its consequences for instrument design, and investigate the impact of the measurement technique to achieve plate parallelism. We find that extended exposure to sunlight affects the etalon coatings, i.e., lowering the peak transmission and leaving an imprint of the pupil of the GREGOR solar telescope on the etalon that is directly exposed to sunlight. The finesse of both etalons, however, remains high so that the impact on imaging spectropolarimetry is negligible.

High-cadence Imaging and Imaging Spectroscopy at the GREGOR Solar Telescope—A Collaborative Research Environment for High-resolution Solar Physics

Abstract In high-resolution solar physics, the volume and complexity of photometric, spectroscopic, and polarimetric ground-based data significantly increased in the last decade, reaching data acquisition rates of terabytes per hour. This is driven by the desire to capture fast processes on the Sun and the necessity for short exposure times “freezing” the atmospheric seeing, thus enabling ex post facto image restoration. Consequently, large-format and high-cadence detectors are nowadays used in solar observations to facilitate image restoration. Based on our experience during the “early science” phase with the 1.5 m GREGOR solar telescope (2014–2015) and the subsequent transition to routine observations in 2016, we describe data collection and data management tailored toward image restoration and imaging spectroscopy. We outline our approaches regarding data processing, analysis, and archiving for two of GREGOR’s post-focus instruments (see http://gregor.aip.de), i.e., the GREGOR Fabry–Pérot Interferometer (GFPI) and the newly installed High-Resolution Fast Imager (HiFI). The heterogeneous and complex nature of multidimensional data arising from high-resolution solar observations provides an intriguing but also a challenging example for “big data” in astronomy. The big data challenge has two aspects: (1) establishing a workflow for publishing the data for the whole community and beyond and (2) creating a collaborative research environment (CRE), where computationally intense data and postprocessing tools are colocated and collaborative work is enabled for scientists of multiple institutes. This requires either collaboration with a data center or frameworks and databases capable of dealing with huge data sets based on virtual observatory (VO) and other community standards and procedures.

Signatures of the impact of flare-ejected plasma on the photosphere of a sunspot light bridge

We investigate the properties of a sunspot light-bridge, focusing on the changes produced by the impact of a plasma blob ejected from a C-class flare. We observed a sunspot in active region NOAA 12544 using spectropolarimetric raster maps of the four Fe I lines around 15655 \AA\ with the GREGOR Infrared Spectrograph (GRIS), narrow-band intensity images sampling the Fe I 6173 \AA\ line with the GREGOR Fabry-P\'erot Interferometer (GFPI), and intensity broad band images in G-band and Ca II H band with the High-resolution Fast Imager (HiFI). All these instruments are located at the GREGOR telescope at the Observatorio del Teide, Tenerife, Spain. The data cover the time before, during, and after the flare event. The analysis is complemented with Atmospheric Imaging Assembly (AIA) and Helioseismic and Magnetic Imager (HMI) data from the Solar Dynamics Observatory (SDO). The physical parameters of the atmosphere at differents heights were inferred using spectral-line inversion techniques. We identify photospheric and chromospheric brightenings, heating events, and changes in the Stokes profiles associated to the flare eruption and the subsequent arrival of the plasma blob to the light bridge, after traveling along an active region loop. The measurements suggest that these phenomena are the result of reconnection events driven by the interaction of the plasma blob with the magnetic field topology of the light bridge.

Horizontal flow fields in and around a small active region

Aims. Combining high-resolution and synoptic observations aims to provide a comprehensive description of flux emergence at photospheric level and of the growth process that eventually leads to a mature active region. Methods. Small active region NOAA 12118 was observed on 2014 July 18 with the 1.5-meter GREGOR solar telescope on 2014 July 18. High-resolution time-series of blue continuum and G-band images acquired in the blue imaging channel (BIC) of the GREGOR Fabry-P\'erot Interferometer (GFPI) were complemented by LOS magnetograms and continuum images obtained with the HMI onboard the SDO. Horizontal proper motions and horizontal plasma velocities were computed with local correlation tracking (LCT) and the differential affine velocity estimator, respectively. Morphological image processing was employed to measure the photometric/magnetic area, magnetic flux, and the separation profile of the EFR during its evolution. Results. The computed growth rates for photometric area, magnetic area, and magnetic flux are about twice as high as the respective decay rates. The space-time diagram using HMI magnetograms of five days traces a leaf-like structure, which is determined by the initial separation of the two polarities, a rapid expansion phase, a time when the spread stalls, and a period when the region slowly shrinks again. The separation rate of 0.26 km\s is highest in the initial stage, and it decreases when the separation comes to a halt. Horizontal plasma velocities computed at four evolutionary stages indicate a changing pattern of inflows. In LCT maps we find persistent flow patterns such as outward motions in the outer part of the two major pores, a diverging feature near the trailing pore marking the site of upwelling plasma and flux emergence, and low velocities in the interior of pores. We detected many elongated rapidly expanding granules between the two major polarities.

The GREGOR Fabry‐Pérot Interferometer

AbstractThe GREGOR Fabry‐Pérot Interferometer (GFPI) is one of three first‐light instruments of the German 1.5‐meter GREGOR solar telescope at the Observatorio del Teide, Tenerife, Spain. The GFPI uses two tunable etalons in collimated mounting. Thanks to its large‐format, high‐cadence CCD detectors with sophisticated computer hard‐ and software it is capable of scanning spectral lines with a cadence that is sufficient to capture the dynamic evolution of the solar atmosphere. The field‐of‐view (FOV) of 50″×38″is well suited for quiet Sun and sunspot observations. However, in the vector spectropolarimetric mode the FOV reduces to 25″×38″. The spectral coverage in the spectroscopic mode extends from 530–860 nm with a theoretical spectral resolution of R ≈250 000, whereas in the vector spectropolarimetric mode the wavelength range is at present limited to 580–660 nm. The combination of fast narrow‐band imaging and post‐factum image restoration has the potential for discovery science concerning the dynamic Sun and its magnetic field at spatial scales down to ∼50 km on the solar surface (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

The 1.5 meter solar telescope GREGOR

AbstractThe 1.5 m telescope GREGOR opens a new window to the understanding of solar small‐scale magnetism. The first light instrumentation includes the Gregor Fabry Pérot Interferometer (GFPI), a filter spectro‐polarimeter for the visible wavelength range, the GRating Infrared Spectro‐polarimeter (GRIS) and the Broad‐Band Imager (BBI). The excellent performance of the first two instruments has already been demonstrated at the Vacuum Tower Telescope. GREGOR is Europe’s largest solar telescope and number 3 in the world. Its all‐reflective Gregory design provides a large wavelength coverage from the near UV up to at least 5 microns. The field of view has a diameter of 150″. GREGOR is equipped with a high‐order adaptive optics system, with a subaperture size of 10 cm, and a deformable mirror with 256 actuators. The science goals are focused on, but not limited to, solar magnetism. GREGOR allows us to measure the emergence and disappearance of magnetic flux at the solar surface at spatial scales well below 100 km. Thanks to its spectro‐polarimetric capabilities, GREGOR will measure the interaction between the plasma flows, different kinds of waves, and the magnetic field. This will foster our understanding of the processes that heat the chromosphere and the outer layers of the solar atmosphere. Observations of the surface magnetic field at very small spatial scales will shed light on the variability of the solar brightness (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)