Generation Of Greenhouse Gases Research Articles

Empirical assessment of fuel-wood induced carbon footprint in Udu Local Government Area of Delta State, Nigeria

Most studies of carbon footprint (CFP) in relation to climate change focus on the generation of greenhouse gases (GHG) by human activities such as electricity, industrialization and transportation in urban areas with little attention on rural areas. Against this background, this study aims to identify sources of Carbon dioxide (CO2) emission, and estimate the amount of CFP generated through fuel-wood consumption in Udu LGA of Delta State, Nigeria. Data for the study were obtained from a sample of 200 households in four (4) rural settlements chosen randomly from 32 villages. Mixed survey technique which involved questionnaires, field observations and measurement were employed to collect data for the study. Data obtained were analysed using descriptive statistics, Pearson Correlation Analysis and calculation of CFP. The study reveals that the major source of CO2 emission was fuel wood (82.0%), which is used for various domestic and production activities with an average of 39.58kg consumed by each sampled household; thus, generating between 7.24314 MT daily. The amount of CFP also varies directly with the sizes of the sampled households. The study recommends that alternative sources of clean energy should be developed and utilized for sustainable development of the environment and mitigation of climate change phenomenon.

Embodied Energy Coefficient Quantification and Implementation for an Energy-Conservative House in Thailand

Embodied Energy Coefficient Quantification and Implementation for an Energy-Conservative House in Thailand

Comparative Life Cycle Assessment of a centrifugal compressor impeller: Hybrid technology production versus welding production

Sustainable development is one of the main objectives in the turbomachinery sector to achieve the climate neutrality targets set by 2050 protocols. The manufacturing industry consumes an average of 23% of global energy, significantly contributing to the generation of greenhouse gases and other pollutants. Therefore, it is crucial to research technological solutions aimed at reducing consumption for the benefit of the environmental sustainability of the products manufactured. This study presents a comparative environmental impact assessment using the Life Cycle Assessment (LCA) methodology to evaluate the sustainability of two technological alternatives used to produce centrifugal impellers in the industrial sector. The first process analyzed deals with making an impeller by welding the shroud to the impeller body. The second process involves producing the component from a semi-finished product, machined through milling and Electrical Discharge Machining (hybrid solution). The study has been conducted at Nuovo Pignone company. It is based on primary inventory data collected through specific measurement campaigns and modeled using the environmental database Ecoinvent v3.9. The results were produced using the ILCD Midpoint method, and four different impact categories were investigated: Climate Change, Human Toxicity, Cancer Effects, and Freshwater Ecotoxicity. The results demonstrate that the solution produced through hybrid manufacturing is generally less impactful compared to the welded one. The insight implemented in the work is functional in drafting suggestions for manufacturers and customers to reduce the environmental burdens of the examined product.

From sustainable macro debris chemical recycling to microplastic reclamation: Overview, research challenges, and outlook

The current surge in plastic waste generation from human activities has led to environmental hazards associated with Sustainable Development Goal (SDG) 6 (Clean Water and Sanitation), from mismanaged polymeric waste and its derived free plastic debris. Chemical recycling enables the effective end-of-life (EoL) of plastic wastes and debris by transforming them into value-added chemicals, reducing their offsite manufacturing's environmental and social risks related to SDG 13 (Climate Action) while mitigating plastic pollution associated with SDG 6, SDG 14 (Life Below Water), and SDG 15 (Life on Land). Herein, this work examines the recent research progress, technological advancements, and policy implications on the chemical recycling of plastic waste and derived debris from macro to micro levels and implications for achieving SDGs. We identify three primary research challenges related to plastic pollution mitigation: 1. Understanding the extent of plastic pollution and consequences by sources originating from human activities; 2. Exploring the sustainable material life cycle of plastics with minimum waste generation, free debris exposure and pollution related to SDGs 14 and 15, and carbon emissions aligned with SDG 13; 3. Indicating the necessary local and global efforts to deploy plastic production, use, and waste management as per sustainable plastic life cycle concepts associated with SDG 12 (Responsible Production and Consumption). Future perspective directions lie in mitigating plastic pollution on both the sources identified by plastic waste and derived debris generation from individual human activity and the sinks associated with free debris exposure to natural environments. Reducing plastic use, waste reuse, repurposing, and recycling can fully mitigate these negative externalities but also generate greenhouse gas emissions, which requires decarbonization under climate commitments.

Isolation and Characterization of Indigenous Bacteria with Purifying Potential in Solid Palm Oil Extraction Sludge Generated by SOCAPALM-Mbambou

The oil palm industry contributes significantly to the economic development of producing countries such as Cameroon. Unfortunately, the exploitation of palm oil constitutes a source of environmental pollution due to the production of enormous quantities of waste during its extraction process, including solid sludge generating greenhouse gases which contribute to global warming climatic. All this leads to the search for alternatives which consists of isolating and characterizing indigenous bacteria with biodegradation capacities in sludge from palm oil extraction. The pH and bacterial counts were determined by the potentiometric method and the decimal dilution technique, respectively. The isolated bacteria were identified by their cultural, cellular and biochemical characteristics. In addition, the identification of Gram- bacteria was further explored by the API 20 E gallery. The palm oil biodegradability test was carried out on M2 medium supplemented with 2% palm oil. The solid sludge biodegradability test was carried out on liquid MSM medium supplemented with 4% sludge stock solution. The results showed that the sludge sample had a slightly alkaline pH of 7.3. A bacterial load of around 10<sup>9</sup> CFU/g of soil was counted. Thirty-one bacterial strains were isolated and purified, including 12 <i>Bacillus sp</i>, 10 <i>Pseudomonas sp</i>, 8 <i>Proteus mirabilis</i> and 1 <i>Klebsiella pneumoniae</i>. All isolates tested for their ability to degrade palm oil or solid sludge grew in culture media with palm oil or solid sludge as the sole source of carbon and energy but with a difference in load. Thus, isolates BI2, BI5, BI31, BI10 and BI 9 showed the highest degradation capacities. These isolates could be used to constitute consortia of microorganisms that can be used in the treatment of waste generated by palm oil extraction.

Planetary Health and Radiology: Why We Should Care and What We Can Do.

Climate change adversely affects the well-being of humans and the entire planet. A planetary health framework recognizes that sustaining a healthy planet is essential to achieving individual, community, and global health. Radiology contributes to the climate crisis by generating greenhouse gas (GHG) emissions during the production and use of medical imaging equipment and supplies. To promote planetary health, strategies that mitigate and adapt to climate change in radiology are needed. Mitigation strategies to reduce GHG emissions include switching to renewable energy sources, refurbishing rather than replacing imaging scanners, and powering down unused scanners. Radiology departments must also build resiliency to the now unavoidable impacts of the climate crisis. Adaptation strategies include education, upgrading building infrastructure, and developing departmental sustainability dashboards to track progress in achieving sustainability goals. Shifting practices to catalyze these necessary changes in radiology requires a coordinated approach. This includes partnering with key stakeholders, providing effective communication, and prioritizing high-impact interventions. This article reviews the intersection of planetary health and radiology. Its goals are to emphasize why we should care about sustainability, showcase actions we can take to mitigate our impact, and prepare us to adapt to the effects of climate change. © RSNA, 2024 Supplemental material is available for this article. See also the article by Ibrahim et al in this issue. See also the article by Lenkinski and Rofsky in this issue.

Achieving adequate nutrition in a malnourished world: the role of sustainable diets and animal source foods

Malnutrition affects over half the world’s population, manifesting in myriad forms. Nearly 1 in 4 children never reach their full growth potential, while 1 in 2 lack key micronutrients essential for health and development.1 Furthermore, 1 in 3 women suffer from anemia, and 2 in 3 do not get enough vital micronutrients. At the same time, over 2 in 5 adults are overweight or obese, and 1 in 5 live with high blood pressure. These various forms of malnutrition lead to physical and cognitive impairments, increased susceptibility to infections and chronic diseases, and reduced quality and length of life. They also impose immense economic, social, and health burdens. In addition to harming human health, our food system damages the planet, generating greenhouse gas emissions that drive climate change and depleting freshwater reserves. It also causes deforestation and habitat destruction which drive species to extinction. These grave harms to both human and environmental wellbeing demand urgent action. Transforming our food systems is imperative to promote nutritious diets that deliver adequate nutrition and protect against noncommunicable diseases, while simultaneously protecting our planet, its biodiversity, and natural resources. As a response, many call for drastically limiting consumption of animal source foods like meat, eggs, and dairy. They argue that these foods jeopardize both human health and environmental sustainability. However, is it possible to meet the nutritional needs of the global population with few animal source foods? What are the full impacts, both positive and negative, of animal source foods on human health and the environment? In this presentation, I will review the latest scientific evidence surrounding these questions. I will examine whether mindfully produced and consumed animal source foods can be part of the solution. Join me to explore these critical issues concerning sustainable nutrition and the role of animal source foods in our food system transformation.

Household food waste in Surakarta City, Indonesia: Quantity, global warming potential (GWP), and management

Households represent one of the main contributors to food waste in urban areas. Surakarta is one of the cities in Indonesia where a significant portion of household food waste is disposed of in landfill sites. The piles of food waste can become an environmental issue if left unmanaged, as they generate greenhouse gas emissions that contribute to global warming. The aim of this research is to determine the quantity, emission estimations, and management of household food waste in Surakarta City. A total of 151 household samples had their food waste collected over a period of 7 days. The method for measuring the quantity of food waste involved direct measurements using a scale, calculating food waste emissions using the GWP formula, and collecting management data through a questionnaire. The research results indicate that, on average, households dispose of 0.499 kg/week of food waste and estimate food waste emissions to be 0.789 kg CO2e/week. In addition to being discarded, some food waste is managed as animal feed and fertilizer. Implementing proper and sustainable management can lead to a reduction in the quantity of food waste sent to landfills.

A Projection Study of Gaseous Pollutants Formed, Potential Health Effects and Clinical Codification in Piyungan Landfill

The world is currently facing significant environmental challenges due to increasing urbanization and globalization. Human activities can produce greenhouse gases (GHGs) such as CO2 and CH4. One of the contributors to GHG generation is the open dumping of Municipal Solid Waste (MSW), particularly because much of the waste is organic. It undergoes anaerobic decomposition, leading to the formation of GHGs, particularly methane. However, CH4 has a high potential for energy generation, and if harnessed properly, it can be highly beneficial. This study aims to assess the total air pollutants emitted from the landfill gas (LFG), including methane (CH4), carbon dioxide (CO2), and nonmethane organic compounds (NMOC) at the Regional Piyungan landfill in D.I. Yogyakarta province. The study also projected the year when the production of these gaseous pollutants would peak and when they are expected to be exhausted. Additionally, the study aimed to identify the potential health problems and clinical codification caused by these gaseous pollutants. To achieve these objectives, the LandGEM 3.03 version of the model developed by USEPA was used for the period 2023-2071. Clinical coding used the 2019 version of the ICD-10 reference. The estimated values for total LFG were 1.648E+04 (2024) and 1.584E+04 (2025) Mg/year, while CH4 was estimated at 4.403E+03 (2024) and 4.230E+03 (2025) Mg/year. CO2 was estimated to be 1,208E+04 (2024) and 1,161E+04 (2025) Mg/year, and NMOC was projected at 2,839E+01 (2024) and 2,727E+01 (2025) Mg/year. Some of the toxic effects that can occur cause respiratory, visual, and mental disorders with a variety of clinical codes.

Biochar as Alternative Material for Heavy Metal Adsorption from Groundwaters: Lab-Scale (Column) Experiment Review.

The purpose of this manuscript is to present a review of laboratory experiments (including methodology and results) that use biochar, a specific carbon obtained by a pyrolysis process from different feedstocks, as an alternative material for heavy metal adsorption from groundwater. In recent years, many studies have been conducted regarding the application of innovative materials to water decontamination to develop a more sustainable approach to remediation processes. The use of biochar for groundwater remediation has particularly attracted the interest of researchers because it permits the reuse of materials that would be otherwise disposed of, in accordance with circular economy, and reduces the generation of greenhouse gases if compared to the use of virgin materials. A review of the different approaches and results reported in the current literature could be useful because when applying remediation technologies at the field scale, a preliminary phase in which the suitability of the adsorbent is evaluated at the lab scale is often necessary. This paper is therefore organised with a short description of the involved metals and of the biochar production and composition. A comprehensive analysis of the current knowledge related to the use of biochar in groundwater remediation at the laboratory scale to obtain the characteristic parameters of the process that are necessary for the upscaling of the technology at the field scale is also presented. An overview of the results achieved using different experimental conditions, such as the chemical properties and dosage of biochar as well as heavy metal concentrations with their different values of pH, is reported. At the end, numerical studies useful for the interpretation of the experiment results are introduced.

Elucidation of the Mechanism of Greenhouse Gas Generation by Abiotic Transformation of Nutrient Ions Flowing into Closed Water Areas with Little Phytoplankton

Elucidation of the Mechanism of Greenhouse Gas Generation by Abiotic Transformation of Nutrient Ions Flowing into Closed Water Areas with Little Phytoplankton

Emissions Sufficientarianism

AbstractThis paper defends strong emissions sufficientarianism as an approach to assigning moral rights to generate greenhouse gas emissions. Strong emissions sufficientarianism holds that only subsistence emitting is morally permissible. This paper argues that, since it is uncertain how many subsistence emissions there will be, the present generation owes it to future generations to refrain from generating non-subsistence emissions, not to risk imposing on them a tragic choice between sacrificing themselves and contributing to very dangerous climate change. The paper also addresses the charge that emissions sufficientarianism, in general, is too permissive since it entails a right to contribute to very dangerous climate change. The overall message is that, given the moral urgency posed by climate change, there is little room for distributive principles besides emissions sufficientarianism. This casts doubt on the appropriateness of relying on carbon budgets in assigning rights to emit.

Omnidirectional Battery Electric Vehicle for Use in Oil Palm Plantation

Concerns on the low labour shortage and the need to reduce greenhouse gas (GHG) generation prompted the industrial player to increase mechanisationduring operation and adopting low carbon footprint mobile platforms. In this paper, a design and analysis study was conducted and reported on a conceptual battery electric vehicle (BEV) for use in the oil palm plantations. With a maximum operating road speed of 30km/hr and harvesting load of 320kg, the BEV will require a minimum operational power of 44.5kW. In accommodating the soggy ground with the demand to navigate narrow and undulating terrains, the proposed BEV was designed to be equipped with an omnidirectional functionality with continuous track, without the use of conventional wheels. Major components arrangement and design for the omnidirectional mechanism are presented in this paper. This preliminary work will also serve as the foundation towards refining the BEV design, especially on the vehicle functionality and manoeuvrability in the plantation sites. Further recommendations are also outlined that will focus on validating the conceptual design and analysis on the total energy generation and consumption of the BEV.

A NUMERICAL STUDY ON THE REDUCTION OF GREENHOUSE GASEOUS COMPONENT (CO2) DUE TO THE ADDITION OF H2 IN THE FUEL STREAM OF THE COUNTERFLOW CH4/AIR DIFFUSION FLAME

In this study, a series of 1-D and steady-state numerical simulations have been performed for the prediction of the effect of the addition of H2 on the characteristics of a non-sooting counterflow CH4/Air diffusion flame using detailed chemical reaction model, which is composed of 325 elementary chemical reactions and 53 chemical species. Under the steady-state assumption, a set of one-dimensional transport equations of mass, momentum, species, and energy along with the equation of state has been solved numerically at the atmospheric conditions over the counterflow configuration by exploiting an efficient numerical code, OPPDIF (a Fortran Program for Computing Opposed-Flow Diffusion Flames). The grid adaption technique has been used to achieve better convergence as well as to ensure the maximum accuracy of the simulated results. It is found that the flame temperature is increased due to the addition of H2 with CH4, which is injected into the fuel stream. The elevation in the temperature is caused by the augmentation of the integrated heat release rate of the elementary reactions supported by the active radicals (H, O, and OH), which are generated by the higher reactivity of H2. Besides, it is found that the mole fractions of H2O are increased as the percentage of H2 in the loading fuel (CH4) is increased and also, it is identified that the chain propagating reaction, OH + H2 => H2O + H is dominating one which produces highest amount of H2O. Furthermore, it is noticed that the indirect greenhouse gas or precursor, CO is reduced when H2 is added to CH4. Consequently, the mole fraction of the principle greenhouse gas, CO2 is decreased significantly when the fuel, CH4 percentage is modified by the higher percentage of H2. The sensitivity analysis of elementary reactions reveals the fact that the chemical reaction: OH + CO => H + CO2 is a dominating reaction in producing a lower amount of CO2 when the volume fraction of H2 is increased in the fuel (CH4) stream. In the presence of 75 % H2 in CH4, the pressure-dependent reaction, O + CO (+M) => CO2 (+M) appears as another chemical route that also generates greenhouse gas, CO2 but its contribution is negligibly small.

The ratio but not individual of fragile to refractory DOM affects greenhouse gases release in different trophic level lakes

Inland shallow lakes are recognized as an important source of greenhouse gases (GHGs), and their contribution is expected to increase due to global eutrophication. The generation and release of GHGs involved multiple variables, leading to many uncertain potential factors. This study examined the emission characteristics of GHGs at the water-air interface in 12 shallow lakes categorized into four eutrophic levels in the Yangtze River basin. The average emission rates of CH4, CO2 and N2O were 1.55, 3.43, 18.13 and 30.47 mg m−2 h−1, 4.12, 14.64, 25.11 and 69.84 mg m−2 h−1, and 0.2, 0.25, 0.43 and 0.79 mg m−2 day−1 in the oligotrophic, mesotrophic, eutrophic and hypereutrophic lakes, respectively. There were significant correlations between eutrophic levels and the emission rates of CH4 and CO2 (p < 0.05). Redundancy analysis and Mantel test were conducted to further examine the key factors influencing carbon emissions from eutrophic water. It was found that the presence of algae and nutrients in the overlying water played a crucial role in the release of GHGs, indicating the importance of ecosystem productivity in the carbon budget of the lake. In order to assess the bioavailability of organic matter, a new indicator called R(P/H) was proposed. This indicator represents the ratio of protein and humus-like components, which were obtained through EEMs-PARAFAC modeling. The relationship between R(P/H) and CH4 was found to be exponential (R2 = 0.90). Additionally, R(P/H) showed a linear relationship with CO2 and N2O (R2 = 0.68, R2 = 0.75). Therefore, it is crucial to consider R(P/H) as an important factor in accurately estimating global GHG emission fluxes in the future, especially with advancements in the database.

Asphalt pavement pothole repair with recycled material and preheating: Laboratory and field evaluation

Asphalt pavement pothole repair with hot-mix asphalt (HMA) is one of common maintenance activities for transportation agencies, which requires considerable energy use and generates greenhouse gas emission (GHG) for production of HMA. This study investigated mechanical performance and environmental impact of an innovative pothole repair method using recycled asphalt pavement (RAP) and preheating. According to the common failure modes of asphalt patch, comprehensive laboratory tests were conducted on the lab-made and field-cored specimens, including indirect (IDT) strength, interface bonding strength, and abrasion resistance at dry, freeze-thaw, and pore pressure conditions. Based on laboratory testing results of the HMA with 0%–50% RAP contents, HMA with 30% RAP was selected for pothole repair in the field test section because it can lead to satisfactory moisture resistance and comparable interface bonding and abrasion resistance with traditional HMA. After repair, field cores were collected for additional laboratory analysis. The results show that moisture resistance of the patching materials decreased with the increase of RAP content. The freezing thaw (FT) effect was found to cause more degradation in IDT and interface shear strength than dynamic pore water pressure simulated in moisture induced stress tester (MIST), while the pore water pressure caused more abrasion loss of patching material. On the other hand, preheating the pothole before repair was found to be effective in enhancing mechanical performance and durability of asphalt patch under various environmental conditions. With the application of preheating, asphalt patching repaired by HMA with 30% RAP can achieve comparable or better performance than that made with traditional HMA, while reducing energy consumption and carbon emission.

Sustainable valorizing high-protein feather waste utilization through solid-state fermentation by keratinase-enhanced Streptomyces sp. SCUT-3 using a novel promoter

Feather waste, a rich source of proteins, has traditionally been processed through high-temperature puffing and acid-base hydrolysis, contributing to generation of greenhouse gases and H2S. To address this issue, we employed circular economy techniques to recover the nutritional value of feather waste. Streptomyces sp. SCUT-3, an efficient proteolytic and chitinolytic bacterium, was isolated for feather degradation previously. This study aimed to valorize feather waste for feed purposes by enhancing its feather transformation ability through promoter optimization. Seven promoters were identified through omics analysis and compared to a common Streptomyces promoter ermE*p. The strongest promoter, p24880, effectively enhanced the expression of three candidate keratinases (Sep39, Sep40, and Sep53). The expression efficiency of double-, triple-p24880 and sandwich p24880-sep39-p24880 promoters were further verified. The co-overexpression strain SCUT-3-p24880-sep39-p24880-sep40 exhibited a 16.21-fold increase in keratinase activity compared to the wild-type. Using this strain, a solid-state fermentation process was established that increased the feather/water ratio (w/w) to 1:1.5, shortened the fermentation time to 2.5 days, and increased soluble peptide and free amino acid yields to 0.41 g/g and 0.14 g/g, respectively. The resulting has high protein content (90.49 %), with high in vitro digestibility (94.20 %). This method has the potential to revolutionize the feather waste processing industry.

Green Energy Revolution and Substitution of Hydrocarbons with Hydrogen: Distribution Network Infrastructure Materials

Global warming is an accepted fact of life on Earth, posing grave consequences in the form of weather patterns with life-threatening outcomes for inhabitants and their cultures, especially those of island countries. These wild and unpredictable weather patterns have persuaded authorities, governments, and industrial leaders to adapt a range of solutions to combat the temperature rise on Earth. One such solution is to abandon fossil fuels (hydrocarbons) for energy generation and employ renewable energy sources, or at least use energy sources that do not generate greenhouse gases. One such energy carrier is hydrogen, which is expected to slowly replace natural gas and will soon be pumped into the energy distribution pipeline network. Since the current energy distribution network was designed for hydrocarbons, its use for hydrogen may pose some threat to the safety of urban society. This is the first time an overview article has examined the replacement of hydrocarbons by hydrogen from a totally different angle, by incorporating material science viewpoints. This article discusses hydrogen properties and warns about the issue of hydrogen embrittlement in the current pipeline network if hydrogen is to be pumped through the current energy distribution network, i.e., pipelines. It is recommended that sufficient study and research be planned and carried out to ensure the safety of using the current energy distribution network for hydrogen distribution and to set the necessary standards and procedures for future design and construction.

Regional economic impacts of the Los Angeles 100% renewable energy transition

ABSTRACT To help mitigate greenhouse gas (GHGs) generation from burning fossil fuels, many state and local governments are requiring utilities to dramatically increase the share of electricity generated from renewable sources. The City of Los Angeles has set a target of 100% renewable energy by 2045 and has formulated a plan that considers nine potential alternative scenarios that differ by technology, location, and timing. Each scenario has a unique set of local investments, operating and maintenance (O&M) costs, and concomitant rate structures. In this study we develop and apply a computable general equilibrium (CGE) model built specifically for LA to estimate and compare the economic impacts for each of the scenarios over time relative to a reference case. We find differences in economic impacts across scenarios, depending on the level and timing of investment and O&M expenditures, as well as differences in the relative rate changes across scenarios. Results show that employment and economic output are positively correlated with greater capital and O&M spending, while higher electricity rates can dampen economic activity. Several scenarios generate positive economic impacts relative to the reference case, showing that the transition need not have harmful economic impacts, and all scenarios generate a number of other positive co-benefits, such as reduced damage to health from the reduction of ordinary air pollutants. The net employment impacts from 2026 to 2045 across the scenarios range from a low of 3,600 job-year losses annually to 4,700 job-year gains, both around only 0.1% of the baseline average annual employment in the city over that period. The analysis also indicates that lower-income households are relatively more affected than others by the scenarios. Overall, even in the most negatively impactful case, the economic output and employment effects are quite small when taken in the context of the overall size of the regional economy and the large reduction in GHGs.

Application of laccase produced by marine actinomycetes in accelerating the rate of biodegradation of polyethylene

Although plastic is very useful in modern life, its widespread use could impair human sustainability. Improper plastic waste management generates greenhouse gases and harmful waste. Plastics and its associated by-products, such as microplastics, accumulate on land and in the oceans causing harm to human and ecological health. An environmentally friendly solution, such as enzymes-mediated biocatalytic depolymerization, is required for efficient management of the large amount of waste generated around the world. Actinomycetes are less explored for commercial biodegradation processes but have attracted attention since they constitute a significant proportion of the soil and aquatic flora and because of their ability to degrade complex materials. This study involves identification of laccase-producing marine actinomycetes and examining the possibility of accelerating the rate of biodegradation of polyethylene by treating with laccase enzyme. The polyethylene test material treated with laccase enzyme for 30 days shows 9.36 percent rate of biodegradation, which was six times higher than the rate of biodegradation of an untreated one. The change in the chemical structure of the polyethylene was studied using Fourier transform infrared spectroscopy. After treatment with laccase enzyme, the carbonyl index of the polyethylene test material increased to 1.25 indicating that the polymer was oxidized, and post biodegradation study showed that the carbonyl index decreased to 0.66 which confirms the concept that oxidized polymer was utilized by the microorganisms. The laccase-producing isolate A-09 showed 99 percent identity as Streptomyces rubiginosus based on molecular fingerprinting.