Green Engineering Research Articles

A review on the green metal nanotechnology in monogastric animal health: current trends and future prospects.

Green nanotechnology is the emerging field of research in recent decades with growing interest rapidly. This integrates green chemistry with green engineering to avoid using toxic chemicals in the synthesis of organic nanomaterials. Green nanotechnology would create a huge potential for the use of nanoparticles for more sustainable utilization in improving animal health. Nanoparticles can be synthesised by physical, chemical and biological processes. Traditional methods for physical and chemical synthesis of nanoparticles are toxic to humans, animals and environmental health, which limits their usefulness. Green synthesis of nanoparticles via biological processes and their application in animal health could maximize the benefits of nanotechnology in terms of enhancing food animal health and production as well as minimize the undesirable impacts on Planetary Health. Recent advances in nanotechnology have meant different nanomaterials, especially those from metal sources, are now available for use in nanomedicine. Metal nanoparticles are one of the most widely researched in green nanotechnology, and the number of articles on this subject in food animal production is growing nowadays. Therefore, research on metal nanoparticles using green technologies have utmost importance. In this review, we report the recent advancement of green synthesized metal nanoparticles in terms of their utilization in monogastric animal health, elucidate the research gap in this field and provide recommendations for future prospects.

Numerical simulation of GTAW for ZW61 magnesium alloy thin plates: Coupling the finite element method with the cellular automata method

ZW61 magnesium alloy has a wide range of application prospects as a lightweight green engineering material. In this paper, the temperature field and microstructure of gas tungsten arc welding (GTAW) for ZW61 magnesium alloy are simulated by the finite element method and the cellular automata (CA) method. The results show that the microstructure in the center of the fusion zone (FZ) is all equiaxed grains affected by compositional supercooling. While at the edge of the molten pool, the crystals produced by associative crystallization evolve into columnar grains after undergoing competitive growth. Furthermore, the temperature field of the molten pool alters as the welding heat input increases. Especially, the temperature gradient behind the molten pool slows down. Thus, the cooling rate during solidification of the molten pool decreases, increasing the size of the weld microstructure. Meanwhile, solute concentration plays an essential role in the weld microstructure evolution. The rise in Zn content both refines the size of the equiaxed grains and inhibits the growth of the columnar crystals. Moreover, the experimental results of the thermal cycling curves and the FZ microstructure exhibit minimal error with the simulation results, verifying the reliability of the model.

Green engineering of NiO nanoparticles decorated with Arachis hypogaea shell extract for biomedical applications

Abstract We attempted to synthesize nickel oxide nanoparticles (NiO-NPs) utilizing waste Arachis hypogaea (peanut) shell extract and studied their structural, morphological, and biological performance for biomedical applications. The green engineered NiO-NPs possessed a face-centered cubic structure with an average particle size of 20 nm in highly crystalline form. NiO-NPs were shown to have an optical resonance peak at 327 nm with 3 eV as the optical band gap according to the UV–visible spectra, and the stretching band between Ni–O were evidenced from the FTIR and Raman spectrum. Utilizing green approach the stable nanoparticles were obtained with average particle size of 31 nm from SEM analysis; zeta potential value of −17.6 mV, and PDI as 0.68, revealed the formation of spherical nanoparticles with distinct morphologies without aggregation. XPS analysis confirmed the oxidation states of the elements Ni (2p) and O (1s). This approach may help to increase the surface area, increasing the possibility of nanoparticles interacting with bacterial cells. Furthermore, the presence of nickel and the oxygen oxidation state were confirmed by XPS. Proteus vulgaris, Streptococcus oralis, Bacillus subtilis, and Escherichia coli were found to be susceptible to the antibacterial action of the produced NiO-NPs, with a maximal zone of inhibition of 10.25 mm at 500 μg/ml for P. vulgaris. For P. vulgaris and E. coli, the minimum inhibitory concentrations of NiO were 5.36 and 12.55 %, respectively, at 31.25 μg mL−1. We hereby claim that green engineered NiO NPs decorated with A. hypogaea shell extract have great potential for pharmaceutical and biomedical applications.

Green Quality Management and Green Target Costing and Their Role in Achieving Competitive Advantage

This study mainly aims at the extent of the possibility of achieving integration between green cost management techniques, including green quality management and green target costing, and the extent of the possibility of achieving many benefits from this integration, including environmental benefits as well as economic benefits for the company and achieving competitive advantage. We have concluded that companies can achieve competitive advantage by adopting the proposed model of integration between green quality management and green target costing, with the use of green value engineering in excluding non-value-adding activities and enhancing value-adding activities, which contributes to enhancing customer value and reducing costs, as well as providing environmentally friendly and differentiated green products.

Facile fabrication of 3D-printed cellulosic fiber/polylactic acid composites as low-cost and sustainable acoustic panels

This work presents a green, cost-effective and eco-friendly strategy to reduce noise pollution by developing biopolymer-based 3D-printed acoustic panels. We successfully fabricated two series of composites by varying the weight percentage (wt%) of cellulose fibers of water hyacinth (WH) and pineapple leaf (PAL), with polylactic acid (PLA) as the matrix via the heat-press method. All samples were characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Physico-mechanical properties, including hardness, tensile, and impact strength, were improved with increasing fiber loading. Filaments of 1 wt% water hyacinth fibers (WHFs) in PLA (1 WHF/PLA) and 1 wt% pineapple leaf fibers (PALFs) in PLA (1 PALF/PLA) were prepared and tested for 3D printability. The sound absorption coefficients (α) of the 3D-printed panels were investigated from 500 to 5000 Hz sound frequency range. The 3D-printed 1 WHF/PLA and 1 PALF/PLA acoustic panels achieve a maximum α (α-max) of 0.55 and 0.83 at 5000 and 4000 Hz, respectively, featuring the first work to report α-max > 0.5 at low fiber loadings in the high-frequency sound range. The tensile strength of the 3D-printed versions is significantly higher than non-3D-printed counterparts and commercial acoustic absorbers. Our data suggest the prepared 3D-printed panels are excellent candidates for acoustic applications at high-frequency noises. This study exhibits a facile, environmentally benign and sustainable approach to construct highly efficient and mechanically robust biopolymer-based 3D-printed sound-proof panels, which have promising potential as green engineering materials. Interestingly, this research also proposes a mitigation technology for the freshwater invader, Eichhornia crassipes (water hyacinths).

Advancements in Green Chemical Engineering: Developing Sustainable Catalysts for Carbon Capture and Utilization

The development of sustainable catalysts for carbon capture and utilization (CCU) represents a pivotal advancement in green chemical engineering, addressing both climate change and resource scarcity. This study utilizes a qualitative approach, specifically employing literature review and library research methods, to analyze recent advancements in catalyst development for CCU technologies. The analysis highlights the growing emphasis on designing catalysts that are not only efficient but also eco-friendly, with a focus on minimizing environmental impact. By examining various catalytic processes, including chemical absorption, photocatalysis, and electrochemical reduction, this research identifies key strategies for enhancing the effectiveness and sustainability of CCU systems. The findings reveal that while significant progress has been made in improving catalyst performance, challenges remain in scaling up these technologies for industrial applications. Moreover, this study underscores the role of green chemical engineering in fostering a circular economy by converting captured carbon dioxide into valuable products such as fuels and chemicals. Future research should focus on overcoming existing limitations, including catalyst stability and cost-effectiveness, to ensure broader adoption of sustainable CCU technologies. This review contributes to the growing body of knowledge on sustainable chemical processes and offers a roadmap for advancing green engineering practices.

Equal–Additive–Subtractive Remanufacturing Integrated Laser Directed Energy Deposition with Shot Peening and Machining Induced High Performance of Plunger Rod

The number of easily destroyed parts with high value is increasing in industry, and green remanufacture engineering is now mainstream in this new and expanding industrial field. Equal–additive–subtractive manufacturing, as a new technology that combines strengthening technology, additive manufacturing, and machining technology has great potential for development in the area of remanufacturing. Aiming at the damage characteristics of a plunger rod, this paper carries out a study about the repair technology by equal–additive–subtractive manufacturing of laser-directed energy deposition and shot peening. It was found that the microstructure of the materials repaired by equal–additive–subtractive technology is finer and the tensile strength can reach 100.4% of the base material. The surface residual stress of cladding materials changes from tensile stress to compressive stress, which reduces forming defects. Equal–additive–subtractive manufacturing has great significance in expanding the application of hybrid manufacturing and promoting green remanufacturing of parts with high value.

Recent advances in applications of animal biowaste-based activated carbon as biosorbents of water pollutants: a mini-review.

Advances in green engineering and technology have revealed a number of environmentally acceptable alternatives for water purification. In line with this, recent advances in biosorption of pollutants from aqueous solutions using animal biowaste-based activated carbon (AC) are reported herein. Apart from the fish scale-derived AC which is extensively documented, animal bones, among the rest others, have been studied most widely, followed by hair and feathers. Out of the various target water pollutants, removal of heavy metals has been mostly studied. Majority of the reports showed the Freundlich isotherm and pseudo second order as the best fit. Few investigations on the thermodynamics of the adsorption studies and reports on the Gibbs free energy change (ΔG°), enthalpy change (ΔH°), and entropy change (ΔS°) have also been discussed in this report. It has been concluded that while plant-based AC has gained wide interest, the same is not true for the animal-based counterpart albeit the latter's potential for high sorption efficiency as seen in the present report.

SiO2 decorated wood nanocomposite with enhanced mechanical performance, flame and water resistance

Development of lightweight and strong structural material using fast-growing poplar wood is promising for green and sustainable engineering. Herein, the overall performances of fast-growing natural poplar wood (NPW) are significantly enhanced via delignification, in situ growth of SiO2 followed by densification. The SiO2/compressed-delignified-wood (SiO2/CDW) nanocomposite obtained exhibits outstanding mechanical properties including a bending strength of 395.6 ​MPa, a tensile strength of 253.4 ​MPa, and a toughness of 7.1 ​MJ/m3, which is improved by 1548 ​%, 240 ​% and 590 ​%, respectively compared with NPW. In addition, the ignition time and burning time of SiO2/CDW nanocomposite are prolonged by 700 ​% and 112 ​% compared to those of NPW. Moreover, the specific wear rate of SiO2/CDW is 18 ​× ​10−6 mm3/Nm, which is 72.6 ​% lower than that of NPW. Moreover, the spring-back ratios of SiO2/CDW in 95 ​% and in water are 45.2 ​% and 66.7 ​%, which are lower than those of CDW (64.6 ​% and 92.4 ​%). The SiO2/CDW nanocomposite with enhanced mechanical, flame/water retardant and wear performances are promising to meet the needs of modern engineering as green and sustainable materials.

Valorization of tomato processing by-products: Predictive modeling and optimization for ultrasound-assisted lycopene extraction

Lycopene is a carotenoid highly valuable to the food, pharmaceutical, dye, and cosmetic industries, present in ripe tomatoes and other fruits with a distinctive red color. The main source of lycopene is tomato crops. This bioactive component can be successfully isolated from tomato processing waste, commonly called tomato pomace, mostly made from tomato skins, seeds, and some residual tomato tissue. The main investigative focus in this work was the application of green engineering principles in each stage of the optimized ultrasound-assisted extraction (UAE) of enzymatically treated tomato skins to obtain functional extracts rich in lycopene. The experimental plan was designed to determine the influence of studied operating parameters: enzymatic reaction time (60, 120, and 180 min), extraction time (0, 5, 10, 15, 30, 60, and 120 min), and temperature (25, 35 and 45 ℃) on lycopene yield. Process optimization was performed based on the yield of lycopene [1018, 1067, and 1120 mg/kg] achieved at optimal operating conditions. An artificial neural network (ANN) model was developed and trained for predictive modeling of the closed extraction system, with operating parameters used as input neurons and experimentally obtained values for lycopene content defined as the output neural layer. Applied ANN architecture provided a high correlation of experimental output with ANN-generated data (R=0.99914) with a model deviation error for the entire data set of RMSE=5.3 mg/kg. The k-Nearest Neighbor algorithm was introduced to predict lycopene yield using experimental key features: operating temperature, extraction time, and time of enzymatic treatment, split into training and testing sets with an 85/15 ratio. The model interpretation was conducted through the SHAP (SHapley Additive exPlanations) methodology.

Living estuarine shorelines as nature-based green engineering for coastal stabilization: A scientometric analysis

Natural estuarine wetland shorelines play a crucial role in coastal stabilization and preserving ecological security patterns. The effectiveness of estuarine shoreline engineering in reducing coastal erosion and maintaining the stability of ecosystem structures and functions is tightly linked to their types and structures. Although the living estuarine shorelines have received increasing attention, there have been few systematic literature reviews on the development process, research hotspots and future trends in this field. Here we summarized the literatures, and analyzed them in terms of annual publications, subject categories, co-cited journals, countries, institutions, authors, references, and keywords based on OriginPro, VOSviewer, and CiteSpace softwares. Results showed that the studies on living estuarine shorelines have experienced a rapid development phase since 2004, which is mainly categorized into Environmental Sciences and Oceanography, and the research institutions and scholars are mainly from the USA and China. The effects of human activities and climate change on the structures and functions of estuarine ecosystems are the dominant topics. Furthermore, the nature-based management solutions have been proposed to improve the functions and services of estuarine ecosystems. Currently, the habitats of estuarine wetlands worldwide have undergone varying degrees of degradation, therefore, the ecological conservation and restoration of estuarine shorelines urgently require the active participation of the public. It is highly important to integrate multi-disciplinary and multi-technology approaches to construct nature-based, more resilient, multi-service synergistic, and composite living shorelines in coastal zones. The findings of this research can provide scientific guidelines for the adaptive management and conservation of estuarine wetlands.

Green engineering of MgO nanoparticles: Assessment of their antioxidant and antibacterial activity against dental pathogens

Green engineering antibacterial nanoparticles have been synthesized using environmentally friendly plant extracts as nucleation agents due to their sustainability, biocompatibility and cost-effectiveness compared to conventional chemical methods. In this study, magnesium oxide nanoparticles (MgO NPs) were synthesized using the marine plant Avicennia marina as a reducing agent. The green synthesized MgO NPs were characterized for their structural, optical, morphological, and thermal properties using XRD, UV–Vis, TGA-DTA, SEM, and TEM characterization techniques. Our biomedical studies revealed that MgO NPs hold significant promise, demonstrating potent antibacterial and antioxidant properties. In the DPPH assay, MgO NPs antioxidant activity effectively neutralized free radicals. Furthermore, their antimicrobial activity was tested against dental bacterial pathogens, showing strong inhibitory effects on Streptococcus mutans, Streptococcus mitis, Porphyromonas gingivalis, and Streptococcus salivarius microorganisms. These findings underscore the potential of MgO NPs for a range of applications, particularly in the fields of dentistry and antioxidant research.

Ceramics as potential materials in pollution prevention and control

AbstractThe social progress, economic growth, and meteoric urbanization prompt the exploitation of available resources triggering the contagion of the biological and physical elements of the atmosphere irrationally causing global environmental pollution. Environmental contamination monitoring is a dire necessity. Although a number of technologies find mention in the literature for environmental remediation, however, environmental catalysis is an advanced steadily growing technique for pollution abatement. In this dimension, ceramic materials have turned heads due to their wide‐scale application areas. Hitherto, research is being done on advanced ceramics to fabricate novel modules for energy storage applications, in designing green buildings, pollution rheostats, and environmental engineering. This article deals with the abatement of environmental contaminants by adopting various methodologies such as aerobic and anaerobic biological treatments, adsorption, chemical oxidation, membrane separation, photocatalysis, ozonation using the ceramic as precursor materials. The ceramic membranes are cost‐effective, ecofriendly, efficacious, and green approach to obliterate toxins and harmful gases released in environment. Even though, limited literature is available on the abolition of harmful contaminants from air and soil using ceramic materials, an attempt has been made to present currently available data with best of our knowledge. This article will sensitize researchers to refabricate novel materials for environment sustainability.

Green Wearable Sensors and Antennas for Bio-Medicine, Green Internet of Things, Energy Harvesting, and Communication Systems.

This paper presents innovations in green electronic and computing technologies. The importance and the status of the main subjects in green electronic and computing technologies are presented in this paper. In the last semicentennial, the planet suffered from rapid changes in climate. The planet is suffering from increasingly wild storms, hurricanes, typhoons, hard droughts, increases in seawater height, floods, seawater acidification, decreases in groundwater reserves, and increases in global temperatures. These climate changes may be irreversible if companies, organizations, governments, and individuals do not act daily and rapidly to save the planet. Unfortunately, the continuous growth in the number of computing devices, cellular devices, smartphones, and other smart devices over the last fifty years has resulted in a rapid increase in climate change. It is severely crucial to design energy-efficient "green" technologies and devices. Toxic waste from computing and cellular devices is rapidly filling up landfills and increasing air and water pollution. This electronic waste contains hazardous and toxic materials that pollute the environment and affect our health. Green computing and electronic engineering are employed to address this climate disaster. The development of green materials, green energy, waste, and recycling are the major objectives in innovation and research in green computing and electronics technologies. Energy-harvesting technologies can be used to produce and store green energy. Wearable active sensors and metamaterial antennas with circular split ring resonators (CSSRs) containing energy-harvesting units are presented in this paper. The measured bandwidth of the matched sensor is around 65% for VSWR, which is better than 3:1. The sensor gain is 14.1 dB at 2.62 GHz. A wideband 0.4 GHz to 6.4 GHz slot antenna with an RF energy-harvesting unit is presented in this paper. The Skyworks Schottky diode, SMS-7630, was used as the rectifier diode in the harvesting unit. If we transmit 20 dBm of RF power from a transmitting antenna that is located 0.2 m from the harvesting slot antenna at 2.4 GHz, the output voltage at the output port of the harvesting unit will be around 1 V. The power conversion efficiency of the metamaterial antenna dipole with metallic strips is around 75%. Wearable sensors with energy-harvesting units provide efficient, low-cost healthcare services that contribute to a green environment and minimize energy consumption. The measurement process and setups of wearable sensors are presented in this paper.

Fashioning the Future: Green chemistry and engineering innovations in biofashion

The fashion industry stands as a significant contributor to environmental degradation due to its massive production volumes and subsequent waste generation. In response to this pressing concern, this review was conducted following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) protocol, aiming to comprehensively address the environmental challenges inherent in the fashion sector. Focusing on the integration of green chemistry principles and engineering innovations within bio fashion, the study endeavors to explore viable solutions that mitigate the industry’s detrimental environmental impact. Central to this exploration is the pursuit of material sustainability and the creation of eco-friendly, biodegradable clothing alternatives that not only diminish environmental harm but also satisfy aesthetic and functional requisites. By delving into various facets, including biomaterial development, environmentally conscious production processes, biodegradable fashion products, customization, consumer awareness, industry collaboration, and standards, this review elucidates crucial pathways for innovation, pivotal for propelling sustainable practices in the fashion realm. This comprehensive analysis incorporates a rigorous examination highlighting the vast potential of innovation to reshape the fashion landscape, steering it towards a more sustainable and environmentally conscious future.

A scalable, chromatography-free, biocatalytic method to produce the xyloglucan heptasaccharide XXXG

Xyloglucan oligosaccharides (XyGOs) are highly branched, complex carbohydrates with a variety of chemical and biotechnological applications. Due to the regular repeating pattern of sidechain substitution of the xyloglucan backbone, well-defined XyGOs are readily accessed for analytical and preparative purposes by specific hydrolysis of the polysaccharide with endo-glucanases. To broaden the application potential of XyGOs, we present here an optimized, scalable method to access large quantities of galactosylated XyGOs by treatment of the bulk agricultural by-product, tamarind kernel powder (TKP), with a highly specific endo-xyloglucanase at high-solids content. Subsequent β-galactosidase treatment reduced XyGO complexity to produce exclusively the branched heptasaccharide XXXG (Xyl3Glc4: [α-D-Xylp-(1 → 6)]-β-D-Glcp-(1 → 4)-[α-D-Xylp-(1 → 6)]-β-D-Glcp-(1 → 4)-[α-D-Xylp-(1 → 6)]-β-D-Glcp-(1 → 4)-D-Glcp). The challenge of removing the co-product galactose was overcome by fermentation with baker’s yeast, thereby avoiding chromatography and other fractionation steps to yield highly pure XXXG. This simplified approach employs many of the core concepts of green chemistry and engineering, enables facile production of 100 g quantities of XyGOs and XXXG for laboratory use, and serves as a guide to further production scale-up for applications, including as prebiotics, plant growth effectors and elicitors, and building blocks for glycoconjugate synthesis.

Experimental investigations on the flexural behavior of compression-cast seawater sea-sand concrete beams reinforced with CFRP bars

To address the corrosion problems, environmental concerns, and achieve green and sustainable civil engineering practices, this study designed several compression-cast seawater sea-sand concrete (SSC) beams reinforced with corrosion-resistant carbon fiber-reinforced polymer (CFRP) bars (i.e., FRP-SSC beams) and their flexural behavior was experimentally investigated through four-point bending tests. Twelve FRP-SSC beams were designed, including three normal-cast and nine compression-cast ones. The critical parameters included the concrete casting forms, water-to-cement (w/c) ratios, and reinforcement ratios of CFRP bars (ρf). Effects of the concrete casting methods, w/c ratios, and ρf on the flexural responses of FRP-SSC beams were comprehensively studied. In addition, the flexural theorems were used to derive the prediction models of the equivalent stress block parameters (i.e., εcm, α1, and β1) and flexural strength (Mu) of compression-cast FRP-SSC beams. Moreover, based on the experimental results, effectiveness and accuracy of the proposed flexural strength design models were verified by using the existing design specifications. Finally, the results indicate that, (1) compression-cast FRP-SSC beams with the larger ρf (1.78 %) exhibited bending failure featured by compression concrete crushing, whereas that with the smaller ρf (0.75 %) shown splitting failure; (2) The cracking moments of compression-cast FRP-SSC beams increased significantly owing to the higher compressive strength and elastic modulus of compression-cast concrete (CCC); (3) Because of the pronounced brittleness of CCC, the improvement of the ultimate flexural capacity of compression-cast FRP-SSC beams was limited; (4) Under the same moment level, the maximum crack widths of compression-cast FRP-SSC beams were smaller than their normal-cast counterparts; and (5) the proposed flexural strength design models could yield more accurate, safer, and conservative predictions of flexural strength for both normal- and compression-cast FRP-SSC beams.

Dynamic tensile properties of straw fiber reinforced rubber concrete

Rubber concrete (RC) has received a great deal of attention in the field of construction materials, owing to its outstanding mechanical properties and potential for waste recycling. Despite extensive research on the mechanical behavior of RC, there remains a notable gap in understanding the dynamic characteristics of fiber reinforced rubber concrete. This study specifically focuses on the dynamic characteristics of RC with straw fibers as reinforcement. The investigative methodologies employed scanning electron microscope (SEM) analysis, computed tomography (CT) scans, and split Hopkinson pressure bar (SHPB) with a high-speed camera system for dynamic tension tests. The CT experimental findings reveal a uniform distribution of rubber particles and straw fibers within the concrete matrix. The dynamic tensile strength of straw fiber reinforced rubber concrete (SFRC) demonstrates a linear correlation with increasing loading rates. The results showed that SFRC-1.5 had 4.8 % lower static strength and 15 % lower dynamic strength than RC without straw fibers at the load rate of 110 GPa/s. In terms of energy, the dissipated energy density increased by 5.36 % at this loading rate. In addition, at a straw content of 2.5 %, the initial cracking time reached a maximum value of 220 μs. The highest level of shear resistance was observed at this content. This study emphasizes the heightened capability of SFRC under dynamic loading forces, thereby contributing to its potential application in green civil engineering and other related fields.

The effect of swirling shear blade on gas-liquid flow pattern and mass transfer performance in Venturi injector

To address the challenge of low mass transfer efficiency of gas-liquid reaction in traditional reactors, this study proposes a new method to improve the gas-liquid mass transfer efficiency by integrating swirl shear blades (SSB) into Venturi injectors. The gas-liquid flow patterns in the mixing and diffusion sections between the Swirl Venturi Injector (SVI) and the Traditional Venturi Injector (TVI) was compared, and it was found that the SSB significantly reduced the proportion of annular flow while increased the proportion of mist flow. The enhancement factor αE and the acceleration factor αA are applied to evaluate the mass transfer performance. Compared to TVI, the maximum αA of SVI was 29%, and the maximum αE was 43%. This work shows great potential in efficiently capturing gas components with low solubility in the liquid phase, thereby helping to achieve the goal of green chemical engineering.

Non-green ecological conservation: right-wing ecology in contemporary Germany

ABSTRACT After the rise and mainstreaming of the modern ecological movement, the right-wing ecological ideology has not gradually died out, and right-wing ecologists are still very active today. They not only actively participate in ecological debates and activities, but also combine their ideological concepts with practice, and focus on right-wing land grabbing in rural areas. As ecological issues tend to blur the boundaries between political camps, right-wing ecological conservation in ‘green’ garb is extremely misleading and harmful, and therefore needs to be studied in depth. Firstly, this article analyses the ideological basis of right-wing ecology in contemporary Germany from three aspects: historical view, human view and worldview. Secondly, by analyzing the basic positions of right-wing ecologists in the three main fields of ecological conservation, namely species protection, animal protection, green genetic engineering and organic agriculture, and their specific modes of action, this article identifies the motives of the right-wing ecologists’ participation in ecological conservation in terms of historical reasons and practical needs, and analyses the characteristics of their argumentation. Finally, on the basis of the above research, this article specifies the essential differences between right-wing ecological conservation and modern, civilized and scientific ecological conservation and its harms.