Greater Physical Stability Research Articles

Recent Update on Applications of Nanostructured Lipid and Solid Lipid Nanocarriers Carriers in Drug Delivery Systems: a Narrative Review

Objective: The review article highlights the development of nano-formulations like solid lipid nanocarriers and nanostructured lipid carriers and their applicability in different drug delivery systems. Significance: In order to get around some of the drawbacks of traditional formulations, lipid base delivery save received increased interest in recent years. These lipidic carriers are created to get around the drawbacks of other colloidal carriers, including polymeric nanoparticles, emulsions, and liposomes, which have the advantages of great physical stability, a favorable release profile, and tailored drug delivery. Conclusion: Nanostructured lipid carriers are an up-and-coming type of nano-carrier that can be used to develop highly effective and customized treatments for cancer chemotherapy. Changing their surface can help target specific areas and make them work better while lowering the side effects of high doses, which is essential for dealing with drug resistance in cancer chemotherapy.

Solid lipid Nanoparticles and Nanostructured Lipid Carrier: A Novel Approach for Lipid-Based Drug Delivery System

Lipid nanoparticles, or LNPs, including nanostructured lipid carriers (NLCs) and solid lipid nanoparticles (SLNs), attracted a lot of attention lately. SLNs were formed to circumvent the confines of the most common colloidal carriers because of their benefits, which include a favorable profile of release and precise administration of the drug with great physical stability. NLCs are the succeeding group of lipid nanoparticles with better capacity loading and durability. There are three possible NLC structural models. These LNPs may find usage in clinical medicine, research, cosmetics, and drug delivery.

Production of Stable Electrically Conductive PVDF Membranes Based on Polydopamine-Polyethyleneimine-Assisted Deposition of Carbon Nanotubes.

Electrically conductive membranes (ECMs) have emerged as a multifunctional separation technology that integrates membrane filtration with electrochemical reactions. Physical stability remains a critical challenge for ECMs synthesized by coating polymer membranes with conductive materials. In this article, polydopamine (PDA) and polyethyleneimine (PEI) were used to facilitate the synthesis of significantly more stable ECMs using poly(vinylidene fluoride) (PVDF) ultrafiltration membranes and carbon nanotubes (CNTs). Four different synthesis methods were compared in terms of the final surface stability and separation properties: (1) CNTs deposited on PEI-crosslinked PDA-coated PVDF membranes, (2) PEI-crosslinked CNTs deposited on PDA-coated PVDF, (3) PDA, PEI and CNTs sequentially deposited layer-by-layer on PVDF, and (4) PEI-crosslinked PDA deposited on CNT-coated PVDF. The results revealed that method 1 generated ECMs with the greatest physical stability, highest electrical conductivity (18,518 S/m), and sufficient permeability (395.2 L/(m2·h·bar). In comparison, method 2 resulted in membranes with the highest permeability (2128.5 L/(m2·h·bar), but with low surface conductivity (502 S/m) and poor physical stability (i.e., 53-75% lower peel-off forces compared to other methods). Overall, methods 1, 3, and 4 can be used to make highly conductive membranes with a 97-99% removal of methyl orange by electrochemical degradation at -3 V.

Molecularly imprinted polymer-based electrochemical sensors for monitoring the persistent organic pollutants chlorophenols.

Because of the serious risks they pose to the environment and public health, chlorophenols (CPs), a typical class of the most persistent organic pollutants, have drawn increasing attention. Monitoring CPs effectively has become a pressing and difficult problem. The rapidly increasing need for onsite and real-time CP detection has led to the consideration of electrochemical sensing as a workable solution. Molecularly imprinted polymer (MIP)-based electrochemical sensing has emerged as a promising area for environmental monitoring in response to this analytical problem. MIPs, in conjunction with miniature electrochemical transducers, provide the opportunity to detect target analytes in situ. These devices have the advantages of great chemical and physical stability, cheap production costs, good selectivity, and quick response times. Most studies suggest that these sensors use nanoparticles to improve their analytical properties, especially sensitivity. Furthermore, these sensors have successfully used real water samples without the need for time-consuming pretreatment procedures. This article provides an overview of electrochemical MIP-based sensors reported to detect CPs in water samples. To obtain the highest sensitivity, special consideration is given to the fabrication of the sensors, which includes the use of various functional monomers, sensing platforms, and materials. Several other parameters are also discussed, including the linear concentration range, limit of detection, and the types of water samples that were examined.

The characteristics and biological activity enhancements of melatonin encapsulations for skin care product applications

Melatonin (MLT) exhibits antioxidant, ultraviolet protection, anti-inflammatory, and anti-aging properties. However, its effectiveness is limited by instability, a short half-life, and incompatible absorption. In this research, we encapsulated melatonin (MLT) in transfersomes (MT) and niosomes (MN) to enhance their properties and investigate their effects through in vitro cell assays using murine macrophages cells and human foreskin fibroblasts cells. The vesicle morphology, vesicle size, polydispersity index, zeta potential, entrapment efficiency (EE%), attenuated total reflectance-Fourier transform spectroscopy (ATR-FTIR) spectra, along with in vitro release, permeation profiles, and stability study were also evaluated. The results showed that both encapsulations displayed spherical morphology at the nanometric scale, their great physical stability and provided an EE% range of 58–78%. The MLT incorporation into the vesicle was confirmed by the ATR-FTIR spectra. Additionally, the encapsulation’ release profiles fitted with the Higuchi model, indicating controlled release of melatonin. Furthermore, MT showed greater permeability than MN and MS including melatonin deposition. In cell assays, MT exhibited significantly higher nitric oxide inhibition and stimulation of collagen compared to MN and MS. Therefore, MT demonstrated the highest possibility for anti-inflammatory and collagen-stimulating activities that could be applied in pharmaceutical or anti-aging cosmetic products.

Optimisation of the physicochemical stability of extra virgin olive oil-in-water nanoemulsion: processing parameters and stabiliser type

Extra virgin olive oil-in-water nanoemulsions stabilised with synthetic or clean label surfactants (Tween 20 or soy lecithin) was prepared using high-pressure homogenisation (HPH). The effect of HPH pressure and the number of cycles were assessed through response surface methodology to optimise homogenisation processing parameter. Mean droplet diameter (MDD), polydispersity index (PDI), thermal stability and oxidation stability of the resulting emulsions were evaluated. The results showed that the formation and stability of nanoemulsions can be affected by the homogenisation processing parameters (pressure and cycles) and the properties of surfactants (interfacial tension, viscoelasticity and molecule structure). Although MDD and PDI of Tween 20 stabilised nanoemulsions were influenced by homogenisation pressure and cycles, there was not a significant effect on lecithin-stabilised nanoemulsions. A homogenisation pressure of at least 400 bars produced Tween 20 stabilised nanoemulsion (MDD < 200 nm), whereas lecithin-stabilised nanoemulsion were obtained after high-speed homogenisation without using HPH. HPH at 400 bars for 1 cycle produced nanoemulsions with greater physical stability when using either Tween 20 or lecithin. Tween 20 stabilised nanoemulsion showed significantly higher (p < 0.05) thermal stability and lipid oxidative stability than lecithin-stabilised nanoemulsion. Following an optimisation study using regression modelling, the optimal homogenisation parameter for MDD of Tween 20 stabilised emulsion was found at pressure of 764 bars with 1 cycle, while lecithin-stabilised emulsion was found at pressure of 3 bars with 2 cycles. Overall, this study has important implications for optimising nanoemulsion production for potential application in the food industry.

Microencapsulation of astaxanthin based on emulsion solvent evaporation and subsequent spray drying.

Astaxanthin (AXT) is widely used in the food, drug, and cosmetics fields, but its applications are extremely limited by its intrinsic properties. Herein, a novel encapsulation system had been performed to fabricate AXT-loaded microcapsules through emulsion solvent evaporation and spray-dried methodologies. The influence of polylactic acid (PLA) concentrations on the characteristics of AXT-loaded dispersions and resultant microcapsules were investigated. The results showed that the sizes and zeta potentials of dispersions and microcapsules increased with increasing PLA content (9.8 to 24.6wt%). The encapsulation efficiency (EE) of the microcapsules increased with increasing PLA concentration up to 21.4wt%. The moisture content values, flowability, and bulk density of the obtained microcapsules decreased with increasing PLA content (9.8 to 24.6wt%). Furthermore, the cell culture experiment indicated that the obtained microcapsules had no cytotoxicity and possessed excellent antioxidant activity. This work provides a new strategy for fabricating AXT-enriched microcapsules and expands their application in nutritional products. PRACTICAL APPLICATION: This work fabricated a novel encapsulation system for AXT through emulsion solvent evaporation and spray drying methodologies. The obtained AXT-loaded microcapsules possessed great physical stability and could expand potential applications of AXT.

Self-assembled magnetic polymeric micelles for delivery of quercetin: Toxicity evaluation on isolated rat liver mitochondria

Multifunctional nanocarriers as a promising platform could provide numerous opportunities in the field of drug delivery. Drug carriers loaded with both magnetic nanoparticles (MNPs) and therapeutic agents would allow the combination of chemotherapy with the possibility of monitoring or controlling the distribution of the nano vehicles in the body which may improve the effectiveness of the therapy. Furthermore, by applying these strategies, triggering drug release and/or synergistic hyperthermia treatment are also reachable. This study aimed to explore the potential of the quercetin (QUR) loaded magnetic nano-micelles for improving drug bioavailability while reducing the drug adverse effects. The bio-safety of developed QUR loaded magnetic nano-micelles (QMNMs) were conducted via mitochondrial toxicity using isolated rat liver mitochondria including glutathione (GSH), malondialdehyde (MDA), and the ferric reducing ability of plasma (FRAP). QMNMs with a mean particle size of 85 nm (PDI value of 0.269) and great physical stability were produced. Also, TEM images indicated that the prepared QMNMs were semi-spherical in shape. These findings also showed that the constructed QMNMs, as a pH-sensitive drug delivery system, exhibited a stable and high rate of QUR release under mildly acidic conditions pH (5.3) compared to neutral pH (7.4). The most striking result to emerge from the data is that an investigation of various mitochondrial functional parameters revealed that both QMNMs and QUR have no specific mitochondrial toxicity. Altogether, these results offer overwhelming evidence for the bio-safety of QMNMs and might be used as an effective drug delivery system for targeting and stimuli-responsive QUR delivery.

In2O3/oxygen doped g-C3N4 towards photocatalytic BPA degradation: Balance of oxygen between metal oxides and doped g-C3N4

Hybrid semi-conductor heterojunction appears to be a promising technology for pollutant removal and wastewater treatment. However, the interface modification of the heterojunction and the working mechanisms remain elusive, thus impeding the development of highly efficient photocatalysis. In this work, we highlighted the key role played by the 3D/2D In2O3/oxygen doped graphitic carbon nitrides (g-C3N4) heterojunction, named In2O3/OGCN, on the photocatalytic performance. The characteristic results showed a balance of oxygen between In2O3 and OGCN, which enabled a stable interaction in the heterojunction to specifically tune the oxidation power, and this strategy can be applied to rationally control the photocatalytic activity of organic pollutants. The optimized In2O3/OGCN heterojunction demonstrated a notable photocatalytic degradation capability for bisphenol A (BPA), which was better than that of pristine In2O3 and OGCN, respectively. This photocatalyst had a great physical stability and can be recycled for further use. Meanwhile, the exceptional photodegradation capacity was attributed to spatially separated charge carriers, fast-charge transportation characteristics, and the special band gap structure of In2O3/OGCN heterojunction. In addition, the covalent bond between In-O significantly improved oxygen stability in the lattice, thereby increasing the reliability of the material. This research presents a new opportunity to fabricate metal oxides/OGCN heterojunction photocatalysts which have potential application in wastewater treatment by adjusting the oxygen between the two compounds in heterojunction.

Synthesis of bio-inspired cellulose nanocrystals-soy protein isolate nanoconjugate for stabilization of oil-in-water Pickering emulsions

The development of hybrid polysaccharide-protein complexes as Pickering emulsion stabilizers has attracted increasing research interest in recent years. This work presents an eco-friendly surface modification strategy to functionalize hydrophilic cellulose nanocrystals (CNC) using hydrophobic soy protein isolate (SPI) via mussel adhesive-inspired poly (l-dopa) (PLD) to develop improved nanoconjugates as stabilizers for oil-in-water Pickering emulsion. The physicochemical properties of the CNC-PLD-SPI nanoconjugate were evaluated by solid-state 13C NMR, FT-IR, TGA, XRD, contact angle analysis, and TEM. The modified CNC (conjugation content of 38.22 ± 1.21%) had lowered crystallinity index, higher thermal stability, and more hydrophobic than unmodified CNC, with an average particle size of 309.9 ± 8.0 nm. Use of amphiphilic CNC-PLD-SPI nanoconjugate with greater conformational flexibility as Pickering stabilizer produced oil-in-water emulsions with greater physical stability.

A laboratory study to disentangle hydrological, mechanical and structural mechanisms of soil stabilization by plant mucilage between eroding and depositional zones of a slope

AbstractBiological exudates, such as plant mucilage, can greatly stabilize soils, but as the mechanical and hydrological drivers depend much on soil particle size composition, eroding and depositional areas of a slope may respond differently. Soils from an eroded midslope and a depositional footslope in an arable farm were amended with chia (Salvia hispanica) seed mucilage at concentrations of 0 g C kg−1, 0.46 g C kg−1 and 2.3 g C kg−1 mucilage, formed into cores, and then imparted with wetting and drying (WD) cycles. Mucilage increased the stability of these inherently stable soils from 80% to &gt;98% water‐stable macroaggregates at 0 WD cycles regardless of slope position. Aggregate stability was maintained after 5 WD cycles by mucilage, whereas the stability of unamended soil dropped by 66.7% in the footslope and 30.1% in the midslope compared with 0 WD. The underlying physical stability properties were measured by tensile strength and penetration resistance for mechanical properties, water sorptivity and repellency for hydrological properties, and micro‐, meso‐, macro‐ and total porosity for structural properties. Almost every soil physical property measured changed less with WD cycles if mucilage was present. Compared to unamended soil, 2.3 g C kg−1 mucilage amendment decreased water sorptivity from 0.289 mm s−1/2 to 0.122 mm s−1/2 in the midslope and 0.230 mm s−1/2 to 0.182 mm s−1/2 in the footslope after 5 WD cycles. Aggregate stability, total porosity and water sorptivity were correlated. In the midslope, hydrology and penetration resistance were affected the most, which was likely to be driven by mucilage deposition in the macropores of this more coarsely textured soil. In the footslope, the greater impact of mucilage on tensile strength was likely to be driven by buffering of macroporosity formation by WD cycles in this finer‐textured soil.Highlights We explored how slope position interacts with plant mucilage to drive soil physical stability. Changes in soil physical stability by plant mucilage have rarely been considered with slope position. Interactions between mucilage and soil particles caused greater physical stability in the midslope than footslope. Mucilage stabilized soil by easing changes in pore structure, DOC redistribution and water repellency, with particle bonding less important.

Impact of oil phase concentration on physical and oxidative stability of oil-in-water emulsions stabilized by sodium caseinate and ultra-high pressure homogenization

In the present study, oil-in-water emulsions were formulated using 5.0% (w/v) of sodium caseinate (SC) and different oil concentrations (10–30%, v/v) by conventional homogenization (CH) and ultra-high pressure homogenization (UHPH, 200–300 MPa). The effect of oil concentration and pressure of treatment on emulsions characteristics and stability was studied. Emulsions were characterized assessing their microstructure, droplet size distribution, rheological properties, emulsifying activity index (EAI), creaming stability by Turbiscan®, and photo-oxidation. UHPH emulsions, especially those treated at 200 MPa, showed smaller droplet size and greater physical stability than CH emulsions. In addition, emulsions containing higher oil volume fractions (20 and 30%) exhibited greater physical and oxidative stability. UHPH emulsions treated at 200 MPa and containing 20% oil content were the most stable emulsions against physical separation and photo-oxidation. These results show that UHPH is a potential technology to enhance the physical and oxidative stability of emulsions containing sodium caseinate as emulsifier for several applications.

Synergistic interaction of natamycin with carboxymethyl chitosan for controlling Alternata alternara, a cause of black spot rot in postharvest jujube fruit

Black spot rot of jujube, caused by Alternata alternara, is an important disease affecting jujube tree and fruit production. In this study, the mixtures of natamycin (NATA) and carboxymethyl chitosan (CMCS) were investigated for their combined and/or individual bioactivity against A. alternara and the quality maintenance of postharvest jujube fruit. The combined effectiveness between NATA and CMCS was calculated by Wadley’s method, and the results indicated synergistic interactions (SR ≥ 1.5) between NATA and CMCS up to the ratios of 1: 100 and 1: 500. Then, an emulsion was developed by mixing NATA and CMCS and was characterized by determining the particle size and the zeta potential. The results suggested that the emulsion has great physical stability after storage for 60 d at 25 °C. Furthermore, the emulsion was applied to the postharvest treatment of fresh jujube fruit. The results indicated that the treatment significantly decreased the fruit respiration rate and ethylene production, reduced postharvest natural decay, promoted fruit firmness, and delayed loss of titratable acidity and vitamin C during the storage 40 d at 10 °C, maintaining a better quality of the jujube fruit. Finally, high-throughput sequencing was used to determine the sequences of the ITS2 gene in ITS5-1737F variable regions between the treated and control jujube fruit. The results showed that the emulsion reduced the entire fungal counts and altered the absolute abundance of plant pathogens, including Alternaria species, in the jujube fruit. Taken together, these results suggested that the formulation incorporating NATA and CMCS represents an alternative to control postharvest diseases and to improve the shelf life quality of jujube fruit.

Fractal surface analysis and thermodynamic properties of moisture sorption of calcium–sucrose powders

ABSTRACTFractal analysis, using water adsorption and an image analysis technique, was applied to investigate the effect of surface irregularities on the thermodynamic properties of matrix calcium–sucrose powder moisture sorption. The sorption isotherms were evaluated at 15, 25, and 35°C for calcium–sucrose powders obtained by a cryogenic process (CP) and spray drying (SD). Solubilization of the powders was observed after 20 days of storage at 25°C, and the powder CP had greater physical stability than SD. There was good agreement among the fractal dimension computed by scanning electron microscopy analysis and water adsorption isotherm. The surface fractal dimensions were between 2.19 and 2.44 for CP and were larger than those obtained for SD, which were between 2.11 to 2.26. The differential and integral enthalpies increased as the surface geometry became more irregular, also increased the interactions between the powder surface and water molecules. These results suggested that the increase in the matrix irregularities for a product can displace the minimum integral entropy toward high water activity, thereby improving the storage stability.

Fermentation strategy to produce high gluconate vinegar

Gluconic acid is a non-volatile acid that has many applications in food, pharmaceutical and cleaning fields. Gluconic acid has been detected as main oxidation product of &lt;em&gt;Acetobacter&lt;/em&gt; and &lt;em&gt;Gluconobacter&lt;/em&gt; strains growing on grape must, and it plays an important role in Traditional Balsamic Vinegar. Commonly, high gluconate vinegars have a greater physical stability and a greater preference by consumers because are perceived less pungent. In fact, gluconic acid reduces the pH and increases fixed acidity of the vinegar without increasing the sensation of pungency typical of acetic acid. Its taste is acid but mild sweet and, therefore, gluconic acid has influence on the sensory complexity of the vinegar. The aim of this work is to set up a fermentation procedure that improves the quality of balsamic vinegar by using selected yeasts and acetic acid bacteria strains able to oxidize glucose in grape must-based media having a different sugars concentration. In particular, &lt;em&gt;Saccharomycodes&lt;/em&gt; &lt;em&gt;ludwigii&lt;/em&gt; UMCC 297 and &lt;em&gt;Acetobacter&lt;/em&gt; &lt;em&gt;pasteurianus&lt;/em&gt; UMCC 1754 strains were chosen as selected starter cultures for small-scale fermentation of cooked grape must, to evaluate the physical-chemical parameters affecting gluconic acid production in the obtained vinegar. The strains used and the control of all production process have been fundamental for obtaining the vinegar with the desired characteristics.

Stability of β-carotene loaded emulsions vary by viscosity of hydroxypropyl methylcellulose dispersions

The physical stability of oil-in-water emulsions containing β-carotene was investigated to assess the emulsification of three hydroxypropyl methylcellulose (HPMC) of varying substitution and viscosity and gum acacia (GA) control dispersions. Initially, emulsions stabilized with GA had particle sizes of 0.79 μm, whereas the HPMC stabilized emulsions possessed particle sizes of about 1.38–1.96 μm. Following storage at 25 °C or 37 °C for up to 12 days, no significant differences between the initial and final particle sizes for two of the three HPMC stabilized emulsions (P < 0.05) were observed and remained <2.0 μm. However, the particle size distributions changed with time of storage at 25 °C or 37 °C in all emulsions, but were minimal in the emulsion containing the highest initial viscosity HPMC (0.401 Pa s). Images from light microscopy demonstrated that variability in droplet sizes was more prominent in low viscosity, low M:HP HPMC stabilized emulsions. Small amplitude oscillatory shear measurements revealed that the HPMC that possessed a viscosity of 0.401 Pa s and high M:HP (4.45) displayed characteristics of a weak gel network, which likely provided additional resistance against particle size increase. The analysis of the data demonstrates that HPMC with high viscosity, high M:HP produce emulsions with greater physical stability.

Dye-Sensitized Solar Cells: Physically Stable Polymer-Membrane Electrolytes for Highly Efficient Solid-State Dye-Sensitized Solar Cells with Long-Term Stability (Adv. Energy Mater. 3/2014)

A highly stable, solid-state dye-sensitized solar cell with excellent power conversion efficiency is demonstrated using a novel 3D polymer network membrane (3D-PNM) electrolyte. As reported by Taiho Park and co-workers in article number 1300489, a one-pot, in situ cross-linking polymerization on the surface of TiO2 particles in the presence of redox species encapsulates with a thin porous membrane layer and leads to great physical stability for the 3D-PNM on the surface of the TiO2 electrode.

Single and mixed poloxamine micelles as nanocarriers for solubilization and sustained release of ethoxzolamide for topical glaucoma therapy

Polymeric micelles of single and mixed poloxamines (Tetronic) were evaluated regarding their ability to host the antiglaucoma agent ethoxzolamide (ETOX) for topical ocular application. Three highly hydrophilic varieties of poloxamine (T908, T1107 and T1307) and a medium hydrophilic variety (T904), possessing a similar number of propylene oxide units but different contents in ethylene oxide, were chosen for the study. The critical micellar concentration and the cloud point of mixed micelles in 0.9 per cent NaCl were slightly greater than the values predicted from the additive rule, suggesting that the co-micellization is hindered. Micellar size ranged between 17 and 120 nm and it was not altered after the loading of ETOX (2.7-11.5 mg drug g(-1) poloxamine). Drug solubilization ability ranked in the order: T904 (50-fold increase in the apparent solubility) > T1107 is approximately equal to T1307 > T908. Mixed micelles showed an intermediate capability to host ETOX but a greater physical stability, maintaining almost 100 per cent drug solubilized after 28 days. Furthermore, the different structural features of poloxamines and their combination in mixed micelles enabled the tuning of drug release profiles, sustaining the release in the 1-5 days range. These findings together with promising hen's egg test-chorioallantoic membrane biocompatibility tests make poloxamine micelles promising nanocarriers for carbonic anhydrase inhibitors in the treatment of glaucoma.

Spray drying from organic solvents to prepare nanoporous/nanoparticulate microparticles of protein: excipient composites designed for oral inhalation

The aim of this study was to determine if spray-drying could successfully produce microparticles containing the model protein trypsin in a form suitable for inhalation. Trypsin was spray-dried with raffinose from a methanol : n-butyl acetate solvent system (MeOH : BA). The solvent system was then adjusted to include water, and trypsin was co-spray-dried with raffinose, trehalose or hydroxpropyl-β-cyclodextrin. The spray-dried products were characterised by SEM, XRD, DSC, TGA and FTIR. Protein biological activity and in-vitro deposition of trypsin : excipient nanoporous/nanoparticulate microparticles (NPMPs) was also assessed. The inclusion of water in a MeOH : BA solvent system allowed for the successful production of NPMPs of trypsin : excipient by spray-drying. Trypsin formulated as trypsin : excipient NPMPs retained biological activity on processing and showed no deterioration in activity or morphological characteristics when stored with desiccant at either 4 or 25°C. Hydroxpropyl-β-cyclodextrin showed advantages over the sugars in terms of producing powders with appropriate density and with greater physical stability under high-humidity conditions. Fine particle fractions of between 41 and 45% were determined for trypsin : excipient NPMPs. NPMPs of trypsin : excipient systems can be produced by spray-drying by adjustment of the solvent system to allow for adequate solubility of trypsin.

An Alternative Route Towards Metal–Polymer Hybrid Materials Prepared by Vapor‐Phase Processing

AbstractTransition metals incorporated into polymers lead to unusual or improved physical properties that significantly differ from those of purely organic polymers. A simple and practicable incorporation of diverse transition metals into any available polymer would make an important contribution to overcome some of the synthetic difficulties of metal‐polymer hybrid materials. Here, it is demonstrated that atomic layer deposition (ALD) can be a promising means to resolve some of those difficulties. It is found that even polytetrafluoroethylene (PTFE) with its great physical and chemical stability can be easily transformed into a transition metal–PTFE hybrid material simply by applying a metal‐oxide ALD process to PTFE. Upon metal incorporation into the PTFE, the molecular structure as well as mechanical properties (tensile behavior) of PTFE were observed to significantly change. For a better understanding of the changes to the material, experimental investigations using Raman spectroscopy, attenuated‐total‐reflection Fourier‐transform infrared spectroscopy, wide‐angle X‐ray diffraction, and energy‐dispersive X‐ray analysis were performed. In addition, with density functional theory calculations, potential bonding states of the incorporated metal into PTFE were modeled and predicted. The ALD‐based vapor‐phase approach for metal incorporation into a polymer could bring about rapid progress in the research area of metal–polymer hybrid materials.