Grazing Incidence Wide-angle X-ray Scattering Research Articles

Rapid Prototyping for Accelerated Establishment of Film Processing‐Performance Relationships in Silicon Phthalocyanine OFETs

AbstractUnderstanding the complex relationships underlying the performance of organic electronic devices, such as organic field‐effect transistors (OFETs), requires researchers to navigate a multi‐dimensional parameter space that includes material design, solution formulation, fabrication parameters, and device geometry. Herein, a recently developed materials acceleration platform is demonstrated, named the RoboMapper, to perform direct on‐chip fabrication of OFETs by ultrasonic meniscus printing using silicon phthalocyanine (SiPc) derivatives as the semiconductor. OFETs using bis(tri‐n‐butylsilyl oxide) SiPc ((3BS)2‐SiPc) exhibited the best device performance characterized by the highest electron field‐effect mobility (µe). Through optical microscopy and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS), the favorable performance of (3BS)2‐SiPc is attributed to the specific film morphology and molecular packing achieved with optimal print conditions. Investigating the impact of deposition parameters reveals the crucial role of solvent evaporation rate and print speed in achieving high‐quality film formation. Overall, optimal fabrication conditions for (3BS)2‐SiPc devices include slow print speeds and fast evaporating solutions achieved by using a mixture of co‐solvents and an elevated substrate temperature. The results of this work reveal distinct relationships between deposition conditions, film properties, and device performance for each SiPc derivative and emphasize the necessity of high throughput experimentation to comprehensively understand process‐performance relationships in organic semiconductors.

Crystallization dynamics of MAPbI3 perovskite solar cells via solvent engineering methods

Perovskite materials have attracted interest in solar cells due to ease of processing from salts. However, the complex crystal formation of perovskite from solvents is poorly understood. Solvent engineering approach to determine the crystallization dynamics and orientation of MAPbI3 films using grazing incidence wide angle x-ray scattering (GIWAXS) and micro diffraction measurements were studied. The study further probes the effect of moisture, PTAA and PEDOTS: PSS hole transport layers on the stability of MAPbI3 films. Precursor solutions were prepared by dissolving MAI and PbI2 in pure DMF and mixture of DMF: DMSO in 4:1 v/v. Chlorobenzene and Ethyl acetate were used as antisolvent. Films prepared from DMF: DMSO mixture showed no PbI2 signature while those prepared from DMF only, showed PbI2 signature at q= 0.9 A-1. This was attributed to solvent engineering of DMF/DMSO that leads to the formation of MAI/PbI2/DMSO intermediate that delays the crystallization and promotes vertical growth of films. q= 0.9 A-1 signal was associated with high volatility of DMF which led to faster but discrepant nucleation and crystallization rate. Microdiffraction results showed insignificant influence of antisolvent on the perovskite structure. Humidity has a strong influence on the stability of MAPbI3 films. PbI2 intensity in the GIWAXS maps increased with increasing humidity while MAPbI3 intensity decreased. This implied increased degradation of MAPbI3 film with humidity due to recombination of charge carriers. A band gap of 1.57 eV, efficiency of 8.5% and Et of 26 meV were obtained. Films with good crystallization are desirable in solar cells.

Interdependence of Support Wettability ‐ Electrodeposition Rate‐ Sodium Metal Anode and SEI Microstructure

AbstractThis study examines how current collector support chemistry (sodiophilic intermetallic Na2Te vs. sodiophobic baseline Cu) and electrodeposition rate affect microstructure of sodium metal and its solid electrolyte interphase (SEI). Capacity and current (6 mAh cm−2, 0.5–3 mA cm−2) representative of commercially relevant mass loading in anode‐free sodium metal battery (AF‐SMBs) are analyzed. Synchrotron X‐ray nanotomography and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) are combined with cryogenic ion beam (cryo‐FIB) microscopy. Highlighted are major differences in film morphology, internal porosity, and crystallographic preferred orientation e.g. (110) vs. (100) and (211) with support and deposition rate. Within the SEI, sodium fluoride (NaF) is more prevalent with Te−Cu versus sodium hydride (NaH) and sodium hydroxide (NaOH) with baseline Cu. Due to competitive grain growth the preferred orientation of sodium crystallites depends on film thickness. Mesoscale modeling delineates the role of SEI (ionic conductivity, morphology) on electrodeposit growth and onset of electrochemical instability.

Interdependence of Support Wettability - Electrodeposition Rate- Sodium Metal Anode and SEI Microstructure.

This study examines how current collector support chemistry (sodiophilic intermetallic Na2Te vs. sodiophobic baseline Cu) and electrodeposition rate affect microstructure of sodium metal and its solid electrolyte interphase (SEI). Capacity and current (6 mAh cm-2, 0.5-3 mA cm-2) representative of commercially relevant mass loading in anode-free sodium metal battery (AF-SMBs) are analyzed. Synchrotron X-ray nanotomography and grazing-incidence wide-angle X-ray scattering (GIWAXS) are combined with cryogenic ion beam (cryo-FIB) microscopy. Highlighted are major differences in film morphology, internal porosity, and crystallographic preferred orientation e.g. (110) vs. (100) and (211) with support and deposition rate. Within the SEI, sodium fluoride (NaF) is more prevalent with Te-Cu versus sodium hydride (NaH) and sodium hydroxide (NaOH) with baseline Cu. Due to competitive grain growth the preferred orientation of sodium crystallites depends on film thickness. Mesoscale modeling delineates the role of SEI (ionic conductivity, morphology) on electrodeposit growth and onset of electrochemical instability.

A‐Site Cation Incorporation Into the Hole Transport Layer for Efficient Quasi‐2D Perovskite Solar Cells

AbstractThe buried interface of perovskite plays a crucial role in attaining superior performance, partly due to its influence on the structure of the overlying perovskite. Here, a novel buried‐interface strategy is proposed that incorporates A‐site cations (FA+ or Rb+) into the hole transport layer (HTL) to optimize perovskite crystallization. The introduction of A‐site cations results in the formation of perovskite as seed at the interface, which effectively promotes the growth of the overlying perovskite with improved orientation, crystallinity, and rearranged phase distribution. Furthermore, an in‐depth understanding of the influence of the crystallization process is tracked by in situ grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) techniques. Meanwhile, it is found that that FA+, due to the black phase α‐FAPbI3, is more suitable for optimizing the upper perovskite compared with Rb+ (δ‐RbPbI3), and their incorporation can alter the structure of the PEDOT chains, thereby enhancing the carrier transport efficiency. With this approach, the 2D perovskite devices (n = 4) based on FACl‐PEDOT:PSS achieve a remarkable power conversion efficiency (PCE) of 18.37%. The optimized device without encapsulation retains 87% of its initial efficiency after 1440 h of exposure in ambient.

Carbon nanotube intermediate layer intercalation and its influence on surface charge of thin film composite membrane

The surface charge of a separation membrane is a critical factor affecting its performance in ion separation and fouling resistance. Thin-film composite (TFC) polyamide (PA) membrane, commonly used in water treatment, often suffer from excessive surface negative charges, which significantly limits their application and fouling resistance. To address this issue, this work introduces a carbon nanotubes (CNT) intermediate layer to adjust the surface charge of TFC PA membranes, aiming to achieve a PA layer with neutral properties. Novel grazing-incidence wide-angle x-ray scattering (GIWAXS) measurements were employed to elucidate the effect of CNT on the molecular chain stacking of PA. The CNT intermediate layer was found to influence the PA cross-linking, which is related to surface negative charge, by controlling the storage and release of the m-phenylenediamine monomer during interfacial polymerization. The neutral CNT-TFC membrane demonstrated improved NH4+ retention and increased resistance to fouling by protein, surfactant, and E. coli. However, other surface properties, such as roughness and hydrophilicity, could counteract the antifouling benefits of a neutral surface. This work provides insights into additional advantages of CNT intermediate layer intercalation in TFC PA membranes, such as enhanced cross-linking and surface charge control.

Probing Nanoscale Charge Transport Mechanisms in Quasi-2D Halide Perovskites for Photovoltaic Applications.

Quasi-2D layered halide perovskites (quasi-2DLPs) have emerged as promising materials for photovoltaic (PV) applications owing to their advantageous bandgap for absorbing visible light and the improved stability they enable. Their charge transport mechanism is heavily influenced by the grain orientation of their crystals as well as their nanostructures, such as grain boundaries (GBs) and edge states─the formation of which is inevitable in polycrystalline quasi-2DLP thin films. Despite their importance, the impact of these features on charge transport remains unexplored. In this study, we conduct a detailed investigation on polycrystalline quasi-2DLP thin films and devices, carefully analyzing how grain orientation and nanostructures influence charge transport. Employing nondestructive atomic force microscopy (AFM) topography, along with transient absorption spectroscopy (TAS) and grazing-incidence wide-angle X-ray scattering (GIWAXS), we obtained significant insights regarding the phase purity, crystallographic information, and morphologies of these films. Moreover, our systematic investigation using AFM-based techniques, including Kelvin probe force microscopy (KPFM) and conductive AFM (c-AFM), elucidates the roles played by GBs and edge states in shaping charge transport behavior. In particular, the local band structure along the GBs and edge states within both vertical and parallel grains was found to selectively repel electrons and holes, thus facilitating charge carrier separation. These findings provide perspectives for the development of high-performance quasi-2DLP PV devices and highlight potential approaches that can leverage the intrinsic properties of quasi-2DLPs to advance the performance of perovskite solar cells.

Morphology Optimization by Non-Halogenated and Twisted Volatile Solid Additive for High-Efficiency Organic Solar Cells.

Recently, volatile solid additives have attracted tremendous interest in the field of organic solar cells (OSCs), which can effectively improve device efficiency without sacrificing the reproducibility and stability of the device. However, the structure of reported solid additives is onefold and its working mechanism needs to be further investigated. Herein, a novel non-halogenated and twisted solid additive 1,4-diphenoxybenzene (DPB) is employed to optimize the morphology of the active layer in OSCs. The properties of additive DPB, morphology of active layer, and carrier dynamics behaviors have been systematically investigated through theoretical calculations, in situ and ex situ spectroscopy, grazing-incidence wide-angle X-ray scattering (GIWAXS), and grazing-incidence small-angle X-ray scattering (GISAXS) measurement, as well as ultrafast spectroscopy technology. The results reveal that the twisted additive DPB selectively interacts with acceptor Y6, and thus forms optimized morphology of active layer with increased molecular crystallinity, tight molecular packing, and favorable phase separation. As a result, the optimized devices deliver a remarkable power conversion efficiency (PCE) of 19.04%, which is the highest value for the D18-Cl:N3 system to date. These results demonstrate that non-halogenated and twisted solid additive DPB has broad prospects in the preparation of highly efficient OSCs, providing theoretical and experimental guidance for the development of high-performance solid additives.

Nitrogen-Bridged Fused-Ring Nonacyclic and Heptacyclic A-D-A Acceptors for Organic Photovoltaics.

In this work, we designed two nitrogen-bridged fluorene-based heptacyclic FNT and nonacyclic FNTT ladder-type structures, which were constructed by one-pot palladium-catalyzed Buchwald-Hartwig amination. FNT and FNTT were further end-capped by FIC acceptors to form two FNT-FIC and FNTT-FIC non-fullerene acceptors (NFAs), respectively. The two NFAs exhibit more red-shifted absorption and higher crystallinity compared to those of the corresponding carbon-bridged FCT-FIC and FCTT-FIC counterparts. Grazing incidence wide-angle X-ray scattering (GIWAXS) measurements reveal that the 2-butyloctyl groups on the nitrogen in the convex region of FNT-FIC interdigitate with the dioctyl groups on the fluorene in the concave region of another FNT-FIC, resulting in a lamellar packing structure with a d spacing of 13.27 Å. As a consequence, the PM6:FNT-FIC (1:1 wt %) device achieved a power conversion efficiency (PCE) of only 6.60%, primarily due to the highly crystalline nature of FNT-FIC, which induced significant phase separation between PM6 and FNT-FIC in the blended film. However, FNTT-FIC, featuring 2-butyloctyl groups positioned on the nitrogen within the concave region of its curved skeleton, exhibits improved donor-acceptor miscibility, thereby promoting a more favorable morphology. As a result, the PM6:FNTT-FIC (1:1.2 wt %) device exhibited a higher PCE of 12.15% with an exceptional Voc of 0.96 V. This research demonstrates that placing alkylamino moieties within the concave region of curved A-D-A NFAs leads to a better molecular design.

Sputter-deposited TiOx thin film as a buried interface modification layer for efficient and stable perovskite solar cells

Despite perovskite solar cells (PSCs) based on a SnO2 hole-blocking layer (HBL) are achieving excellent performance, the non-perfect buried interface between the SnO2 HBL and the perovskite layer is still an obstacle in achieving further improvement in power conversion efficiency (PCE) and stability. The poor morphology with numerous defects and the energy level mismatch at the buried interface constrain the open circuit voltage and cause instability. Herein, a sputter-deposited TiOx thin film is used as a buried interface modification layer to address the aforementioned issues. Utilizing in situ grazing-incidence small-angle X-ray scattering (GISAXS) during the sputter deposition, we monitor and unveil the growth process of the TiOx thin film, identifying a 10 nm thickness optimum. The defects at the buried interface are passivated through tuning the growth, leading to a suppressed non-radiative recombination and improved PCE (from 22.19 % to 23.93 %). The evolution of the device performance and the degradation process of PSCs using operando grazing-incidence wide-angle X-ray scattering (GIWAXS) under the protocol ISOS-L-1I explains the enhanced stability introduced by the buried interface modification via a sputter-deposited TiOx thin layer. The perovskite decomposition process and the detrimental formation of PbI2 are both slowed down by the TiOx thin layer.

Correlation of Processing and Structure in an Ethylene-Glycol Side-Chain Modified Polythiophene via Combined X-Ray Scattering and 4D Scanning Transmission Electron Microscopy.

The results of a combined grazing incidence wide-angle X-ray scattering (GIWAXS) and 4D scanning transmission microscopy (4D-STEM) analysis of the effects of thermal processing on poly(3[2-(2-methoxyethoxy)ethoxy]-methylthiophene-2,5-diyl) are reported, a conjugated semiconducting polymer used as the active layer in organic electrochemical transistor devices. GIWAXS provides a measure of overall crystallinity in the film, while 4D-STEM produces real-space maps of the morphology and orientation of individual crystallites along with their spatial extent and distribution. The sensitivity of the 4D-STEM detector allows for collection of electron diffraction patterns at each position in an image scan while limiting the imparted electron dose to below the damage threshold. The effects of heat treatment on the distribution and type of crystallites present in the films isdetermined.

Energy Level Tuning in Conjugated Donor Polymers by Chalcogen Exchange for Low Dark Current Organic Photodetectors.

The performance of organic photodetectors (OPDs) using conjugated polymer donors and molecular acceptors has improved rapidly, but many polymers are difficult to upscale due to their complex structures. This study examines two low-complexity thiophene copolymers with substituted benzooxadiazole (FO6-BO-T) or benzothiadiazole (FO6-T). Substituting sulfur with oxygen in FO6-BO-T increased its ionization energy without affecting the optical gap. When blended with the nonfullerene acceptor IDSe, FO6-BO-T showed a significantly lower dark current density (2.06·10-9 A cm-2 at -2 V) compared to FO6-T. Grazing incidence wide-angle X-ray scattering (GIWAXS) measurements demonstrated that pristine FO6-BO-T exhibited a more ordered morphology than FO6-T. However, blending resulted in a significant disruption to the ordered domains in both cases, with a loss of orientational order, suggesting that FO6-BO-T's improved performance is largely related to its increased ionization energy. This study demonstrates the potential of chalcogen atom engineering to enhance the performance of the OPD in scalable polymers.

Stepwise Crystallization and Mass Transport Limitations in Annealed SPEEK Thin Films

Pt-supported SPEEK (sulfonated poly ether ether ketone) thin films, mimicking the ionomer-electrode interface in polymer electrolyte fuel cells (PEFCs), were synthesized with thicknesses from 12 to 105 nm. Their glass transition temperature (Tg) was analyzed via in-situ thermal ellipsometry, revealing a thickness-dependent Tg decrease, indicative of confinement effects. Particularly, a 30 nm film, typical of practical ionomer films, exhibited surface crystallization preceding that at the buried interface, a phenomenon linked to higher mobility at the free surface, as con-firmed by grazing incidence wide-angle X-ray scattering (GI-WAXS) at both sub-critical (0.09º) and supercritical (0.14º) angles. This study elucidates the dynamic interplay between the high-mobility free surface and the interaction-intensive buried interface in confined SPEEK thin films. It was observed that below 30 nm thickness, interfacial interactions become the primary factor influencing transition temperature. Additionally, spatially heterogeneous crystallization, more pronounced in the out-of-plane direction, correlates with reduced proton conduction.

N‐Type Molecular Thermoelectrics Based on Solution‐Doped Indenofluorene‐Dimalononitrile: Simultaneous Enhancement of Doping Level and Molecular Order

AbstractThe development of n‐type organic thermoelectric materials, especially π‐conjugated small molecules, lags far behind their p‐type counterparts, due primarily to the scarcity of efficient electron‐transporting molecules and the typically low electron affinities of n‐type conjugated molecules that leads to inefficient n‐doping. Herein, the n‐doping of two functionalized (carbonyl vs dicyanovinylene) indenofluorene‐based conjugated small molecules, 2,8‐bis(5‐(2‐octyldodecyl)thien‐2‐yl)indeno[1,2‐b]fluorene‐6,12‐dione (TIFDKT) and 2,2′‐(2,8‐bis(3‐alkylthiophen‐2‐yl)indeno[1,2‐b]fluorene‐6,12‐diylidene)dimalononitrile (TIFDMT) are demonstrated, with n‐type dopant N‐DMBI. While TIFDKT shows decent miscibility with N‐DMBI, it can be hardly n‐doped owing to its insufficiently low LUMO. On the other hand, TIFDMT, despite a poorer miscibility with N‐DMBI, can be efficiently n‐doped, reaching a respectable electrical conductivity of 0.16 S cm−1. Electron paramagnetic resonance measurements confirm the efficient n‐doping of TIFDMT. Based on density functional theory (DFT) calculations, the LUMO frontier orbital energy of TIFDMT is much lower, and its wave function is more delocalized compared to TIFDKT. Additionally, the polarons are more delocalized in the n‐doped TIFDMT. Remarkably, as indicated by the grazing‐incidence wide‐angle X‐ray scattering (GIWAXS), the molecular order for TIFDMT thin‐film is enhanced by n‐doping, leading to more favorable packing with edge‐on orientation and shorter π‐π stacking distances (from 3.61 to 3.36 Å). This induces more efficient charge transport in the doped state. Upon optimization, a decent thermoelectric power factor of 0.25 µWm−1K−2 is achieved for n‐doped TIFDMT. This work reveals the effect of carbonyl vs dicyanovinylene on the n‐doping efficiency, microstructure evolution upon doping and thermoelectric performance, offering a stepping stone for the future design of efficient n‐type thermoelectric molecules.

Synchrotron Radiation-Based In Situ GIWAXS for Metal Halide Perovskite Solution Spin-Coating Fabrication.

Solution-processable perovskite-based devices are potentially very interesting because of their relatively cheap fabrication cost but outstanding optoelectronic performance. However, the solution spin-coating process involves complicated processes, including perovskite solution droplets, nucleation of perovskite, and formation of intermediate perovskite films, resulting in complicated crystallization pathways for perovskite films under annealing. Understanding and therefore controlling the fabrication process of perovskites is difficult. Recently, synchrotron radiation-based in situ grazing-incidence wide-angle X-ray scattering (GIWAXS) techniques, which possess the advantages of high collimation, high resolution, and high brightness, have enabled to bridge complicated perovskite structure information with device performance by revealing the real-time crystallization pathways of perovskites during the spin-coating process. Herein, the developments of synchrotron radiation-based in situ GIWAXS are discussed in the study of the crystallization process of perovskites, especially revealing the important crystallization mechanisms of state-of-the-art perovskite optoelectronic devices with high performance. At the end, several potential applications and challenges associated with in situ GIWAXS techniques for perovskite-based devices are highlighted.

Ultralow thermal conductivity of 2D Dion-Jacobson (PDA)(FA)n - 1PbnI3n + 1 perovskite films.

Two-dimensional (2D) perovskites exhibit enhanced thermal stability compared to three-dimensional perovskites, especially the emerging 2D Dion-Jacobson (DJ) phase perovskite. However, the heat transfer mechanisms in DJ phase perovskites are rarely reported. Herein, we determine thermal conductivities of (PDA)(FA)n - 1PbnI3n + 1 films with n = 1-6 by time-domain thermoreflectance. The measured results indicate that the thermal conductivities of these films are extremely low, showing a trend from decline to rise with increasing n values, and reaching to the lowest when n = 2. We measure the propagation of acoustic phonons in films with n = 1-3 by time-domain Brillouin scattering and find phonon velocity plays a key role in the thermal conductivity, which can be explained by the mismatch of spring constants between the inorganic layer and the organic layer using the bead-spring model. The gradually increasing thermal conductivity for larger n values is attributed to the gradual transformation of the grain orientation from horizontal to vertical, which is demonstrated by the grazing-incidence wide-angle x ray scattering (GIWAXS) results. Our work deepens the understanding of the thermal transport process in 2D DJ phase perovskite films and provides insights into thermal management solutions for their devices.

Electrochemical Doping Induced Crystallinity in Organic Mixed Ionic/Electronic Conductors

Organic mixed ionic-electronic conductors (OMIECs) are an exciting class of new materials with a range of potential applications including biosensors, electrochromics, thermoelectrics, and neuromorphic computing. These applications all require ionic transport from an electrolyte into the organic active layer during operation. Characterization of this electrolyte and ion swollen state is essential to understanding device operation on a fundamental level. However, this swollen state is particularly difficult to study because it requires development of in-situ techniques. Here, we utilize in-situ Grazing Incidence Wide Angle X-ray Scattering (GIWAXS) to study the crystallinity of the swollen state of OMIECS as a function of applied potential and processing conditions. We find doping induced crystallinity across a variety of different polymer backbones. Finally, we use organic electrochemical transistors (OECTs) to correlate the electronic conductivity with these doping induced morphological changes.

(Invited) In Situ and Operando Scattering Studies on Quantum Dot-Based Devices

Colloidal quantum dots (QDs) made e.g. of PbS are attractive for various optoelectronic applications due to their tunable band gap with a large absorption wavelength range from the visible to the near-infrared region. Moreover, due to the high intrinsic permittivity, the exciton binding energy of PbS is smaller than in cadmium chalcogenide QDs and polymer materials, which is beneficial for devices driven by charge carrier generation and transport, e.g. photovoltaics and photodetectors.In this work, we introduce wet chemical deposition methods beyond spin coating such as printing and spray deposition of QDs as a facile and potentially large-scale deposition method for high-performance photodetectors. The inner structures including the inter-dot distance of neighboring QDs and the structure, in the deposited QD solids, are studied by grazing-incidence small-angle X-ray scattering (GISAXS). In addition, the facet orientation of the QDs in the QD solids is characterized by grazing-incidence wide-angle X-ray scattering (GIWAXS). In particular, in situ GISAXS/GIWAXS studies during film formation are able to provide detailed information about the complex kinetic processes [1,2]. Operando GISAXS/GIWAXS studies on QD-based devices such as solar cells bring an in-depth understanding of the degradation mechanisms, which is key for improving the device stability and thereby bringing these novel materials into real-world applications [3]. Superlattice deformation in QD films on flexible substrates via uniaxial strain is followed in situ with GISAXS, providing a fundamental understanding of the impact of strain on the performance of flexible devices based on QD films, such as wearable electronics and next-generation solar cells on flexible substrates [4]. Nanoscale Horiz. 5, 880-885 (2020)Nano Energy 78, 105254 (2020)Energy Environ. Sci. 14, 3420-3429 (2021)Mater. Horizon 8, 383-395 (2023)

Judicious Fluorination of Perovskite Quantum Wells Enables Over 25% Efficiency in Inverted Solar Cells

AbstractThe photovoltaic performance of inverted perovskite solar cells (PSCs) is often hindered by trap‐induced non‐radiative recombination and photochemical degradation occurring at the upper interfaces and the grain boundaries of perovskite films. Herein, ortho‐, meta‐, and para‐isomers of fluorophenylethylammonium iodine (F‐PEAI) organic spacer molecules are evaluated for the construction of perovskite quantum wells (2D or quasi‐2D, PQWs) to encapsulate 3D perovskites. Among the three variants, p‐F‐PEAI leads to the most symmetric charge distribution and the weakest steric hindrance which resulting in reinforced interactions with PbI2 and perovskite, the enhanced out‐of‐plane orientation is confirmed by Grazing incidence wide‐angle X‐ray scattering (GIWAXS) results. Density functional theory and crystal orbital Hamilton population (COHP) calculations further confirm that p‐F‐PEAI engages most strongly with the perovskite structure. Moreover, transmission electron microscopy (TEM) characterization is used to illustrate that p‐F‐PEAI‐assisted 2D PQWs effectively passivate both the grain boundaries and surfaces of perovskites. This configuration facilitates effective surface passivation, improves charge carrier transport, and significantly suppresses non‐radiative recombination. The resultant inverted PSCs achieve an excellent power conversion efficiency (PCE) of 25.03% with a fill factor (FF) of 85.11%. The unencapsulated devices exhibit enhanced long‐term stability under ambient environments and continuous light illumination.

Ionic liquid engineering enables 1D/3D perovskite photovoltaics with > 25 % efficiency: A real-time study exploring formation mechanism of 1D perovskites

The advancements in low-dimensional/three-dimensional (LD/3D) perovskite devices represent a promising approach to enhancing both the efficiency and stability of of perovskite solar cells (PSCs). However, while significant efforts have been dedicated to understanding the role of already formed low-dimensional perovskites in passivating defects, refining the work function, little attention has been given to the crystallization process of LD perovskites, particularly when induced by ionic liquids (ILs) as green and stable additive. In this work, the formation process of IL Tetrabutylammonium Thiocyanate (TBASCN)-induced 1D perovskite onto the 3D perovskite under varying annealing conditions were explored by in-situ Grazing-Incidence Wide-Angle X-ray Scattering (GIWAXS) technology, providing a comprehensive investigation into the distinct impacts of 1D perovskite formed under diverse annealing processes on device performance. Owing to the robust interaction and favorable binding energy between the IL TBASCN and perovskite components, coupled with the low formation energy of 1D perovskites, 1D perovskites exhibit rapid formation on the surface of 3D perovskites and display markedly distinct crystallization processes under distinguished annealing conditions. Achieving full crystallization of 1D perovskites necessitates optimal temperature of 100 °C and adequate duration of 100 s. Once fully crystallized, the highly crystalline 1D perovskites and anions SCN- present in ILs can synergistically passivate defects in 3D perovskites, mitigate ion migration and impeding moisture infiltration. Benefiting from the optimized formation process of 1D perovskites, the champion device achieves a power conversion efficiencie (PCE) of 25.18 % and retains 91.0 % of its initial efficiency after 2000 h under RH=40 %. Our research provides new insights for optimizing the formation process of LD perovskites induced by different materials and their application in high-performance LD/3D PSCs.