Gravity Gliding Research Articles

Coupling of supra-to sub-salt structures during gravity gliding: A physical analogue modelling investigation

Viscous salt layers can introduce significant structural complexity to the basins in which they are deposited. Along basin margins, salt typically flows basinward due to regional tilting of the margin, and can be influenced by the geometry of the surface that it flows over (e.g. fault scarps on the base-salt surface). This interaction can lead to coupling of sub- and supra-salt structures, with the orientation and distribution of base-salt structures reflected in the structure of the overburden. However, the controls on the degree of strain coupling during salt-detached translation are relatively poorly understood, in particular the roles played by the thickness and mechanical heterogeneity of the salt unit. This is, in part, caused by difficultly in deconvolving the relative contribution of variables such as salt thickness, the magnitude of base-salt relief, sediment supply, and regional tectonic regime. In addition, seismic reflection data provide only the present structure of the basin, from which its evolution must be inferred.To evaluate the influence of salt thickness and heterogeneity on sub-to supra-salt strain coupling during salt-detached translation in the extensional domain, we present a series of physical analogue models with controlled boundary conditions. We use a model apparatus with a simple geometry comprising three oblique basal steps, and vary the thickness and composition of the salt analogue in each experiment to evaluate the proposed variables. X-ray tomography allows us to image the internal structure during model evolution and therefore gain a 4D view of its structural development. Results show that supra-salt structures associated with thicker and more homogeneous salt units are characterised by symmetric extensional structures and large diapirs, with significant vertical and lateral displacements and only weak coupling to the underlying base-salt relief. Conversely, thinner and more heterogeneous salt units are characterised by asymmetric extensional structures and primary welds, with restricted vertical displacement, such that the resultant overburden structure is strongly coupled to the geometry of the base-salt surface. These results document the important role of base-salt relief in the structural evolution of salt basins and provide model analogues that are valuable assets in seismic interpretation efforts on salt-influenced basin margins.

Salt-related gravity-driven processes in the Levant Basin, Eastern Mediterranean: Insights from physical modeling

The characterization of salt tectonics and its gravity-driven deformation processes are the key to a better understanding of the structural evolution of salt-bearing rifted margins. Unlike most salt basins that have experienced long-lasting deformation, the Messinian evaporites in the Levant Basin have been moderately deformed, offering the opportunity to study the early stage of salt tectonic deformation. Despite the availability of seismic reflection, borehole and bathymetrical data, some uncertainties still exist about the mechanisms responsible for the deformation and structural features observed in the deep-water Levant Basin. Our study includes physical experiments based on published seismic and structural interpretations conducted in the Levant Basin. Our physical experiments take into consideration the main driving parameters that controlled the development of the deep-water Levant Basin, testing the interplay and impact of gravity gliding and spreading from the Levant Margin, gravity spreading from the Nile Deep Sea Fan, and the influence of the passive buttress of the Eratosthenes Seamount. Deformation was imposed by depositing successive sand lobes and/or by tilting the experimental table. The physical models included a thick viscous silicone layer, analogue of the Messinian evaporitic sequence, overlain by a granular overburden, simulating the brittle clastic post-Messinian succession. Results show that the prominent gravity-driven force affecting the deformation pattern of the deep-water Levant Basin is the gravity spreading from the Nile Deep Sea Fan, whereas gravity spreading and gliding from the Levant Margin affect only the proximal to the margin areas. Additionally, the buttressing effect of the Eratosthenes Seamount and the location of the salt basin pinch-out played an important role in the final deformation pattern of this region of the Eastern Mediterranean.

Interplay of positive structural inversion and salt tectonics: The case study of the central Algerian margin, Western Mediterranean

Convergence between African and European plates generates compressional strain, primarily concentrated along the northern African margin. This is testified on the Algerian margin by numerous earthquakes (e.g. Bougrine et al., 2019) and by the presence of active folds and thrusts. Multi-channel seismic reflection profiles from the MARADJA I survey reveal north-verging thrusts rooted below the Messinian units, and the geometries of the Messinian salt structures. This study examines the characteristics of salt tectonics offshore Algiers and Dellys, focusing on the effect of the positive structural inversion of the former passive margin on geometries, timing, and mechanisms of salt deformation. The interpretation of seismic reflection and multi-beam bathymetric data of the MARADJA I survey, along with its comparison with analogue models, allowed us to reconstruct the salt tectonics processes on the margin and to identify the predominant role of a plateau uplift on salt deformation. Early and ubiquitous salt deformation by downbuilding was followed by a major phase of plateau uplift (end of Messinian Crisis), leading to westward gravity gliding and a slowdown of the salt deformation above the plateau. Km-tall salt structures were developed and thick minibasins deposited. Salt tectonics is nowadays active only where the relationship between salt and overburden thickness is favorable.

The effects of subsalt relief on gravity-driven salt tectonics: Results from analogue modelling

Gravity-driven salt-related deformation on passive margins is commonly interpreted as kinematically-linked domains of updip extension and downdip contraction with an intermediate, undeformed zone of translation. Our study uses analogue models to show how salt flow is affected by the subsalt geometry resulting in complex deformation and the alternation of extensional and contractional domains in space and time in translational salt provinces. In our work, the analogue models incorporate subsalt relief associated with half-graben and graben that are realistic geometries along passive margins and combine the effects of gravity spreading in which deformation is driven by differential sedimentary loading, and an early-stage of gravity gliding induced by basin tilt. This approach allows for analysis of how salt flow and overburden deformation are affected by: (1) smoothly dipping subsalt relief; (2) subsalt relief characterized by half-graben with a gently landward dipping extensional fault; (3) subsalt half-graben connected laterally with a distal symmetric graben. For each of these models, we evaluate: 1) the interplay between slipping deformation corresponding to gravity gliding, gravity spreading mechanisms, and subsalt geometry; 2) the spatial and temporal distribution of salt-related structural domains; and 3) the contrasting styles of salt tectonics for different subsalt geometries. In addition, some of the experiments have been repeated considering thicker salt and pre-kinematic overburden and different sedimentation rates. We show that the structures of the subsalt relief variably resist salt flow producing flow mismatch. This variable resistance controls the orientation of the extension and contraction supra-salt structures. Salt surplus and contraction occur over landward dipping base-salt ramps, and a zone of salt depletion and subsidence limited by extensional and contractional hinges occurs over the basinward dipping base-salt ramp. Variations in width and the dip of these base-salt ramps result in stronger flow mismatches and deformation complexity. We also discuss variations in salt flow profile in response to the gravitational forces that drive deformation, allowing a good first-order approximation of viscous salt flow at a regional scale that can be directly compared to examples from various salt-bearing continental margins, particularly the relatively less understood but extremely economically important distal domains of Brazil's Campos and Santos basins.

Salt tectonics in intracontinental sedimentary basins: Triassic–Jurassic salt movement in the Baltic sector of the North German Basin and its relation to post‐Permian regional tectonics

AbstractThe formation and structural evolution of complex intracontinental basins, like the North German Basin, mark fundamental earth processes. Understanding these is not only essential to basic research but also of socioeconomic importance because of the multitude of resources, potential hazards, and subsurface use capability in such basins. As part of the Central European Basin System, major subsidence and structural differentiation affected the Baltic sector of the North German Basin in Permian‐to‐Jurassic times. A dense network of high‐resolution 2D seismic data together with nearby wells allow the creation of regional maps with refined stratigraphic subdivision of unprecedented spatial resolution covering the bays of Kiel and Mecklenburg (Baltic Sea). Cross sections along the basin margin allow reconstruction of the structural evolution of the Zechstein salt and its overburden. At the northern basin margin, near the Kegnaes Diapir, thinning of the Buntsandstein and divergent reflectors indicate Early Triassic faulting and salt movement. In the Late Triassic, tectonic activity increased as expressed by the onset of salt movement in the north‐eastern Glückstadt Graben, major growth of the Kegnaes Diapir and faulting at the north‐eastern basin margin during deposition of the Keuper (Erfurt, Grabfeld, Stuttgart and Weser formations). At the north‐eastern basin margin, we interpret the accumulation of Keuper and Jurassic deposits as an infill of a local sub‐basin bordered by the Werre Fault Zone and Agricola Fault System. Between the Glückstadt Graben and the north‐eastern basin margin, the Eastholstein–Mecklenburg Block formed a more stable area, where salt movement first began during the latest Triassic. In the peripheral part of the basin, salt movement was triggered by thin‐skinned extension associated with thick‐skinned faulting within the axial parts of major graben systems. Indications for gravity gliding are absent. Reactive diapirism is restricted to the basin margin, where reduced overburden thickness and Late Triassic erosion allowed diapiric breakthrough.

A new look at old debates about the Corbières (NE-Pyrenees) geology: salt tectonics and gravity gliding

In the Corbières area, a large-scale nappe has been identified at the beginning of the 20th century: the “Nappe des Corbières Orientales” (NCO) resting over a thick Triassic sole. This geological object is located at the NE of the Pyrenees, close to the Gulf of Lions. At this place, the chain changes in orientation from E-W to NE-SW and presents in detail, a great complexity. The existence of the nappe itself has never been contested. However, due to its overall complexity, several controversies exist regarding the style and chronology of deformation of its substratum in the so-called the “Pinède de Durban” in particular. We show that the new concepts of salt tectonics can clarify these old debates. Indeed, the rise of the Triassic salt during Mesozoic rifting episodes results in the development of characteristic sedimentary sequences (halokinetic sequences) on top of salt walls. It is along one of these, coinciding with the prolongation of the Cévenole Fault System, that the NCO has been individualized. During its Cenozoic emplacement, a gravity-gliding component, explaining the importance of the observed translation, could result from an uplift preceding the rifting at the origin of the Gulf of Lions.

Syn‐depositional halokinesis in the Zechstein Supergroup (Lopingian) controls Triassic minibasin genesis and location

AbstractSalt tectonics is typically caused by the flow of mobile evaporites in response to post‐depositional gravity gliding and/or differential loading by overburden sediments. This situation is considerably more complex near the margins of salt basins, where carbonate and clastic rocks may be deposited at the same time as and be interbedded with more mobile, evaporitic strata. In these cases, syn‐depositional salt flow may occur due to density differences in the deposited lithologies, although our understanding of this and related processes is relatively poor. We here use 3D seismic reflection and borehole data from the Devil's Hole Horst, West Central Shelf, offshore UK to understand the genesis, geometry, and kinematic evolution of intra‐Zechstein Supergroup (Lopingian) minibasins and their effect on post‐depositional salt deformation. We show that immobile, pinnacle‐to‐barrier‐like, carbonate build‐ups and anhydrite are largely restricted to intra‐basin highs, whereas mobile halite, which flowed to form large diapirs, dominates in the deep basin. At the transition between the intra‐basin highs and the deep basin, a belt of intra‐Zechstein minibasins occurs, forming due to the subsidence of relatively dense anhydrite into underlying halite. Depending on primary halite thickness, these intra‐Zechstein minibasins created topographic lows, dictating where Triassic minibasins subsequently nucleated and down‐built. Our study refines the original depositional model for the Zechstein Supergroup in the Central North Sea, with the results also helping us better understand the style and distribution of syn‐depositional salt flow within other layered evaporitic sequences and the role intra‐salt heterogeneity and related deformation may have in the associated petroleum plays.

Physical modelling of the interplay between salt‐detached gravity gliding and spreading across complex rift topography, Santos Basin, offshore Brazil

AbstractThe Santos Basin, offshore Brazil contains a complex set of salt‐tectonic structures, the origins of which are debated, that is, the Albian Gap and the São Paulo Plateau (SPP). The Albian Gap is a ca. 450 km long, 60 km wide feature characterized by a post‐Albian, counter‐regional rollover overlying depleted Aptian salt, and in which the Albian is largely absent. The SPP, located immediately downdip, is defined by a pre‐salt structural high overlain by ca. 2.5 km thick salt. Another prominent feature is the Merluza Graben, a rift‐related depocentre that underlies the southern portion of the Albian Gap and displays significant (3–4 km) base‐salt relief along its main faults. Two competing hypotheses have been proposed to explain the kinematics of these provinces. One invokes post‐Albian extension in the Albian Gap and kinematically‐linked contraction in the SPP. The other invokes post‐Albian salt expulsion in the Albian Gap and salt inflation in the SPP. Recent studies, however, suggest these processes likely alternate in time and space, contributing nearly equally to the evolution of these domains. We apply 3D physical modelling to (i) test this hypothesis; and (ii) to more generally understand how gravity gliding and spreading over three‐dimensionally variable base‐salt relief control regional salt tectonics. The results show a similar salt‐related evolution and structural styles to those proposed in the most recent studies. They also (i) explain the origin of the ca. 25 km wide diapir precursor of the Albian Gap by early salt inflation against base‐salt steps; (ii) show that normal faults with different polarities and rollover types form due to the interplay between gliding and spreading over different base‐salt domains and (iii) provide a mechanism for the origin of strata encased within salt structures. This improves our understanding of the distribution and origin of salt‐related structural styles in worldwide salt basins.

Salt tectonics of the offshore Tarfaya Basin, Moroccan Atlantic margin

Salt tectonics play a critical role on passive margins evolution controlling aspects like structural style, subsidence patterns and thermal history, amongst others. The salt-bearing Atlantic passive margin of Morocco hosts one of the oldest stratigraphic records documenting the opening history of the Central Atlantic. However, the available seismic data is scarce and some offshore basins are still poorly studied, particularly in southern Morocco. Through the interpretation of an unpublished 2D/3D seismic dataset from the offshore Tarfaya Basin (SW Morocco), this study aims to highlight the key events that conditioned the evolution of this salt-bearing basin. From proximal to distal regions, the structural style of the basin is characterized by expulsion rollovers and salt-cored anticlines delimited by primary welded surfaces, evolving to buried salt sheets surrounded by thick minibasins and finally, diapirs actively deforming the modern seabed. From Late Triassic to Early Jurassic times, salt was deposited with a basinward thickening wedge-shaped geometry on a narrow trough developed over thinned continental crust. During the Jurassic, sedimentation and associated salt withdrawal triggered early salt deformation. Gravity gliding is a common process in salt-bearing passive margins that requires an originally continuous autochthonous salt layer with a minimum slope angle and longitude to thickness ratio of the overburden. However, in the Tarfaya Basin, the narrow geometry of the salt-bearing depocenter hampered this process. Early salt tectonics was probably triggered by slope progradation during the Early Jurassic. During the Early Cretaceous, the progradation of the Tan-Tan Delta promoted a continued basinward expulsion of salt, the development of a local salt-detached gravitational system and the proximal extrusion of salt sheets. Finally, from Late Cretaceous to the Present-day, shortening related to the convergence between Africa and Eurasia resulted in thick-skin inversion and the rejuvenation of precursor salt structures.

Thin-skinned extensional salt tectonics, counterregional faults, and the Albian Gap of Brazil

Thin-skinned extension detached on salt is mostly well understood. Faults may dip basinward or landward (counterregional) and intersect the top salt or equivalent weld at cusps/rollers. The polarity of faulting may switch over time, and with sufficient extension, the oldest suprasalt strata separate into rafts with intervening younger depocenters. Salt may break through extensionally thinned overburden to grow as passive diapirs, which can widen during ongoing extension but collapse if the salt supply cannot keep pace with extension. Counterregional normal faults are the most debated structures as they may form by: extension, with the footwall moving basinward relative to the hanging wall; or progressive basinward salt expulsion but only vertical movement of the overburden. Extensional counterregional structures are characterized by: (i) strata that predominantly thicken into the bounding structures, but with areas of basinward thinning due to fault/salt geometry and displacement transfer; (ii) highly elongate plan-view geometries; and (iii) the presence of coeval distal translation and contraction. The most controversial counterregional system is the Albian Gap of the Santos Basin, Brazil. We use the criteria above to argue that it formed by post-Albian thin-skinned extension, with little/no extension during the Albian. This contrasts with the Campos Basin along strike to the NE, where Albian and later extension were accommodated on basinward-dipping faults, and is explained by the rift architecture and consequent base-salt dip. The Aptian salt dipped basinward in the Campos Basin and extension was therefore triggered by Albian gravity gliding. However, the base salt dipped landward over a large area of the northern and central Santos Basin, so that Albian gravity gliding was minimal and Late Cretaceous progradational loading drove gravity spreading and the development of the counterregional system. Accommodation for sediment within the Albian Gap was provided in part by stretching and consequent thinning of the underlying salt.

Tectono‐stratigraphic development of a salt‐influenced rift margin: Halten Terrace, offshore Mid‐Norway

AbstractPre‐rift salt controls structural style variability within rifts by decoupling sub‐ and supra‐salt faults. However, the way in which this variability controls sediment erosion and dispersal, and facies distributions within the coeval syn‐rift stratigraphic succession, remains poorly known. We here use 3D seismic reflection and borehole data to study the tectono‐stratigraphic development of the Halten Terrace, offshore Mid‐Norway, a salt‐influenced rifted margin formed during Middle to Late Jurassic extension. On the eastern basin margin, the rift structural style passes southwards from an unbreached extensional growth fold dissected by numerous horst and graben (Bremstein Fault Complex [BFC]), into a single, through‐going normal fault (Vingleia Fault Complex [VFC]). This southwards change in structural style is likely related to the pinch‐out of or a change in the dominant lithology (and thus rheology) within a pre‐rift (Triassic) evaporite layer, which was thick and/or mobile enough in the north to decouple basement‐ and cover‐involved faulting, and to permit extensional forced folding. As a result, the salt‐influenced BFC underwent limited footwall uplift, with minor erosion of relatively small horsts supplying only limited volumes of sediment to the main downdip depocentre. In contrast, the VFC, which was directly coupled to basement, experienced significant uplift and extensive footwall erosion. The footwall of this structure also locally underwent salt‐detached gravity gliding and collapse as the pre‐rift detachment was tilted. Our results show that where through‐going normal faults develop along the rift flanks, the presence of a pre‐rift salt layer will suppress the topographic expression of the footwall. The pre‐rift salt layer may however facilitate footwall collapse and limit the volume of sediment supplied to downdip basins. Our results also show that variable topography along the rift flanks facilitated the development of relatively small, localised, intra‐rift flank accommodation that trapped flank‐derived sediment, and which meant basins nearer the rift axis were starved of sediment.

Deciphering salt tectonic deformation patterns in the Eastern Mediterranean: Insights from the Messinian evaporite in the Herodotus Basin

Salt-bearing basins are commonly deformed in response to gravity mechanisms (gliding and spreading) and regional tectonics. However, these processes often overlap both in time and space that challenges the understanding of the main causes for salt flow and overburden deformation. In this study, salt-related deformation is investigated at the eastern part of the Herodotus Basin in the Eastern Mediterranean. Deformation in this area is associated with the flow of Messinian salt (evaporite) that was deposited during the Messinian Salinity Crisis (MSC). The MSC sequence is relatively young and is characterized by a thin overburden, and as such provides a unique opportunity to explore key controls of salt-related deformation. High-quality 2D seismic reflection data from the broader area of the carbonate platform of the Eratosthenes Continental Block, which constitutes the natural boundary between the Herodotus Basin to the west and the Levantine Basin to the east, reveal significant thickness variations of the MSC sequence and the overlying Plio-Quaternary clastic sediments. Five distinct salt-tectonic structural provinces characterize the study area that depicts different salt-related deformation styles. Furthermore, the morphology of the Eratosthenes Continental Block plays a critical role in controlling salt flow. Finally, the compressional thickening of the Messinian salt driven by the combination of gravity gliding and spreading results in the absence of a bathymetric step on the seafloor at the western side of the Eratosthenes Continental Block.

Contribution of gravity gliding in salt-bearing rift basins – a new experimental setup for simulating salt tectonics under the influence of sub-salt extension and tilting

Abstract. Basin-scale salt flow and the evolution of salt structures in rift basins is mainly driven by sub- and supra-salt faulting and sedimentary loading. Crustal extension is often accompanied and followed by thermal subsidence leading to tilting of the graben flanks, which might induce an additional basinward-directed driver for salt tectonics. We designed a new experimental analogue apparatus capable of integrating the processes of sub-salt graben extension and tilting of the flanks, such that the overlapping effects on the deformation of a viscous substratum and the brittle overburden can be simulated. The presented experimental study was performed to demonstrate the main functionality of the experimental procedure and setup, demonstrating the main differences in structural evolution between conditions of pure extension, pure tilting, and extension combined with tilting. Digital image correlation of top-view stereoscopic images was applied to reveal the 3D displacement and strain patterns. The results of these experiments suggest that in salt basins affected by sub-salt extension and flank inclination, the salt flow and downward movement of overburden affects the entire flanks of the basin. Supra-salt extension occurring close to the graben centre is overprinted by the downward movement; i.e. the amount of extension is reduced or extensional faults zones are shortened. At the basin margins, thin-skinned extensional faults developed as a result of gravity gliding. A comparison with natural examples reveals that such fault zones can also be observed at the margins of many salt-bearing rift basins indicating that gravity gliding played a role in these basins.

Kinematic interaction between stratigraphically discrete salt layers; the structural evolution of the Corrib gas field, offshore NW Ireland

The kinematic interaction of thin salt layers during basin evolution has received little attention to date, despite there being several basins which contain multiple thin salt layers across NW Europe. This study utilises high-quality 3D seismic reflection data coupled with borehole data to investigate the evolution of the structure containing the Corrib gas field which is composed of two distinct salt structures. Located in the Slyne Basin offshore NW Ireland, the structure consists of a NE-SW oriented Permian salt anticline which folds the overlying Mesozoic stratigraphy. Upper Triassic salt acts as a second mechanical detachment and forms an elongate salt roller parallel to the crest of the Permian salt anticline. The Upper Triassic salt roller forms the footwall of a listric fault which downthrows the anticlinal crest of the folded Jurassic section to the SE. The Permian salt anticline began rising during the Late Triassic and Early Jurassic driven by low-strain regional extension. During the main phase of rifting, a combination of basement tilting, gravity gliding, and salt welding resulted in a steep increase in the amplitude of the Permian salt anticline. The relief on the salt-cored fold resulted in gravity gliding on the Triassic salt, forming the parallel salt roller and listric fault. The throw distribution on the listric fault is driven by the combined mechanisms of gravity sliding on the Triassic salt and by inflation of Triassic salt in the footwall of the fault. The listric fault is reactivated post-rift, suggesting modification of the Permian and Triassic salt structures. This study improves the understanding of the kinematic interaction of thin salt layers during syn-rift and post-rift deformation, with implications for hydrocarbon exploration on the Irish Atlantic margin and further afield.

Taking the Pulse of Salt‐Detached Gravity Gliding in the Eastern Mediterranean

AbstractDespite having a profound impact on the structural evolution of salt‐influenced basins, spatial and temporal variations in rates of salt flow, and their key controls, remain largely unconstrained. We investigate early stage salt‐detached gliding using a 3D seismic data set from the Levant Margin in the Eastern Mediterranean, where gravitational instability due to margin uplift has caused north‐westward translation of the Messinian salt sheet and its overburden. Large base‐salt anticlines mean that basinward translation is recorded by the development of supra‐salt ramp syncline basins (RSBs) and fluid escape pipes, the latter forming due to the leakage of fluid from the anticline crests. The trails of pipes provide kinematic vectors of transport direction, while the stratigraphic record of the RSBs not only constrains the relative ages of the pipes, but allows us to quantify the magnitude and approximate rate of translation. We correlate intra‐RSB horizons across the margin to analyze lateral variations in translation rate, and how these vary through time. We show that translation rates are broadly uniform on the length‐scale of individual anticlines (c. 10 km), but that there is significant margin‐scale (c. 100 km) lateral variability in both the direction and magnitude of translation. We attribute temporal variations in local rates of translation to cyclical “pulses” of salt flow due to volumetric flux imbalances across the anticlines, while the distribution of elastic strain in the overburden modulates the overall basin‐scale trend. These results demonstrate the importance of local stresses in controlling the local direction and rate of salt flow, and further our understanding of salt and overburden rheology.

Leaky salt: Pipe trails record the history of cross‐evaporite fluid escape in the northern Levant Basin, Eastern Mediterranean

AbstractDespite salt being regarded as an extremely efficient, low‐permeability hydraulic seal, an increasing number of cross‐evaporite fluid escape features have been documented in salt‐bearing sedimentary basins. Because of this, it is clear that our understanding of how thick salt deposits impact fluid flow in sedimentary basins is incomplete. We here examine the causes and evolution of cross‐evaporite fluid escape in the northern Levant Basin, Eastern Mediterranean. High‐quality 3D seismic data offshore Lebanon image hundreds of supra‐salt fluid escape pipes distributed widely along the margin. The pipes consistently originate at the crest of prominent sub‐salt anticlines, where overlying salt is relatively thin. The fact the pipes crosscut the salt suggests that hydrofracturing occurred, permitting focused fluid flow. Sequential pipes from unique emission points are organized along trails that are several kilometres long, and which are progressively deformed due to basinward gravity gliding of salt and its overburden. Correlation of pipes in 12 trails suggests margin‐wide fluid escape started in the Late Pliocene/Early Pleistocene, coincident with a major phase of uplift of the Levant margin. We interpret that the consequent transfer of overpressure from the central basin area, in addition to gas exsolution from hydrocarbons already trapped in sub‐salt anticlines, triggered seal failure and cross‐evaporite fluid flow. We infer that other causes of fluid escape in the Eastern Mediterranean, such as subsurface pressure changes driven by sea‐level variations and salt deposition associated with the Messinian Salinity Crisis, played only a minor role in triggering cross‐evaporite fluid flow in the northern Levant Basin. Further phases of fluid escape are unique to each anticline and cannot be easily correlated across the margin. Therefore, despite a common initial cause, long‐term fluid escape proceeded according to structure‐specific characteristics, such as local dynamics of fluid migration and anticline geometry. Our work shows that the mechanisms triggering cross‐evaporite fluid flow in salt basins vary in time and space.

3D simulations of salt tectonics in the Kwanza Basin: Insights from analogue and Discrete-Element numerical modeling

The Kwanza Basin is located at the passive margin of West Africa in the Central Segment of the South Atlantic, and is an important area for oil and gas exploration. The distribution and deformation characteristics of thick Lower Cretaceous (Aptian) salt deposits in the basin have significant impacts on hydrocarbon accumulation. However, reports on their 3D interpretation, together with an understanding of the genesis and evolution of salt tectonics in this area, are scarce in the literature. In this paper, 3D analogue experiments and 3D Discrete-Element numerical simulations are carried out to analyze the zonal characteristics (extension-translation-contraction), the main control factors, and to develop a kinematic model of salt tectonics in the basin. According to our modeling, we make the following conclusions. (1) The zonal characteristics of salt tectonics formed in the basin reflect the superposition of gravity gliding and gravity spreading. The main control factor of basin-scale salt deformation is basement structural activity, which can be summarized into three points: early post-salt basement extension, initial presence of local variation of base of salt gradient and more recent differential subsidence between landward side and seaward side. (2) Salt deformation is episodic, having experienced one stage of regional deformation (Late Aptian to Albian) and two stages of inherited developmental deformation (Campanian, and Eocene to Miocene), mainly resulting in forward expansion towards the ocean. (3) During the early stage of salt deformation, faults developed in suprasalt layers in the extensional and translational zones of the basin, resulting in local high-velocity areas and a large vertical upward velocity component in the salt layer. Later, due to blocking by the outer high region and increasing overburden, salt in contact with the outer high developed a vertical upward velocity component, gradually forming thrust structures. (4) 3D analysis highlights the pervasive lateral deformation of the salt. The main factors governing it are the distribution of accommodation in the salt basin and the initial morphology of the salt layer. In the early stages, salt layer had a velocity component to the salt-scarce side (from north to south), whereas in the later stages, it developed a velocity component to the wide side of the basin (from south to north), leading to the gradual accumulation of salt in the north of the basin. We have shown that 3D simulations can complete the analysis of salt deformation both parallel and perpendicular to the slope in a passive-margin basin. This may provide guidance for the exploration of oil and gas reservoirs in the context of salt tectonics, especially in asymmetrical basins where seismic imaging is poor and has to be supplemented by strong geological concepts including understanding 3D movement of salt.

Structural Evolution at the Northeast North German Basin Margin: From Initial Triassic Salt Movement to Late Cretaceous‐Cenozoic Remobilization

AbstractIn this study, we investigate the regional tectonic impact on salt movement at the northeastern margin of the intracontinental North German Basin. We discuss the evolution of salt pillows in the Bay of Mecklenburg in the light of thick‐ and thin‐skinned tectonics, including gravity gliding, and differential loading using seismic imaging. Stratigraphic and structural interpretation of a 170 km long, multichannel seismic line, extending from the Bay of Mecklenburg to northeast of Rügen Island, incorporates well information of nearby onshore wells. This new high‐resolution seismic line completely images the stratigraphic and tectonic pattern of the subsurface, from the base of the Zechstein to the seafloor. Our analysis reveals that subsidence during Late Triassic to Early Cretaceous at the northeastern basin margin was associated with transtensional dextral strike slip movement within the Trans‐European Suture Zone. We reinterpret the Werre and Prerow Fault Zones west of Rügen Island as an inverted, thin‐skinned normal fault system associated with the formation of the Western Pomeranian Fault System. Salt movement in the Bay of Mecklenburg was initiated in the Late Triassic and lasted until the Early Jurassic. A second phase of salt pillow growth occurred during the Coniacian until Cenozoic and correlates with compression‐related regional basin inversion due to the onset of the Africa‐Iberia‐Europe convergence. Thin‐skinned extensional initialization of salt pillow growth and compressional salt remobilization explains salt pillow evolution in the Bay of Mecklenburg. Additionally, we discuss an impact of gravity gliding on salt pillow evolution induced by basin margin tilt.

Eastern Boulder-Weld fault zone, Colorado: A gravity slide with pop-up structures

The Boulder-Weld fault zone, located southeast of Boulder, Colorado, is about 10 km (6 mi) wide, 34 km (21 mi) long, and involves at least 335 m (1100 ft) of upper Cretaceous sedimentary rocks. It affects the Cretaceous upper Pierre Shale, Fox Hills Sandstone, and the coal–bearing lower Laramie Formation. This study is a detailed examination of the eastern portion of the fault zone which consists of undisturbed areas separated by three long, narrow, fault-bounded uplifts that have received a variety of interpretations over the years. The fault zone geometry is determined from 21 closely spaced cross sections that use more subsurface data than previous studies, incorporate the elevations of the major economic coal seam derived from a published composite structure-contour map, and are area balanced using area-depth-strain (ADS) analysis. The most common structural style is a pop-up structure in which the uplifts are bounded on both sides by reverse faults. At larger-displacement the pop-ups are at the tip of the ramp and a second fault has formed close to the base of the ramp. A few sections show simple ramp anticlines developed above listric thrusts. The lower detachment for all structures is the distinctive Kp2 marker in the upper Pierre Shale. ADS analysis of the best-controlled uplifts shows that the uplifts are area balanced and confirms the lower detachment to be near Kp2. The structures are interpreted to have formed as a gravity slide because they formed in a break-back sequence, a characteristic of gravity gliding, and because the transport direction is approximately down the current southeast dip of the Kp2 detachment.

Tectonics and foreland basin development at the leading edge of the Humber Arm Allochthon, western Newfoundland, Canadian Appalachians

The thrust front of the Northern Appalachians involves Ediacaran rift-related structures of the Laurentian margin that were re-worked in Taconic (Ordovician), Salinic (mainly Silurian) and Acadian (mainly Devonian) deformation events. Much of the thrust front is concealed under the Gulf of St. Lawrence, but Port au Port Peninsula, in western Newfoundland provides a cross-section through the Laurentian passive margin, overlying foreland basins, and the Humber Arm Allochthon. A large area of foreland basin strata is present in areas formerly mapped as Humber Arm Allochthon. Abrupt thickness changes and an abundance of fault-scarp-derived limestone conglomerate indicate that deposition was influenced by block faulting and differential subsidence in a basin undergoing active flexural extension. A coarsening upward trend in the Goose Tickle Group represents a transition from a distal to a proximal sediment source as the Humber Arm Allochthon was emplaced westwards. Goose Tickle Group separates two packages of allochthonous rocks. The West Bay Thrust Sheet, the lower package, represents the leading edge of the Taconic allochthon. Its timing of emplacement is constrained by Darriwilian 3 graptolites both above and below the thrust sheet. Its present-day configuration results from a combination of processes including thrusting, extension by gravity spreading, gravity gliding, and subsequent erosion of material that was deposited in the Goose Tickle Group. The structurally higher Lourdes Thrust Sheet is an out-of-sequence structure associated with Acadian (Devonian) orogenesis. High-angle faults show a protracted history of movement that includes early Taconic flexural extension, Acadian inversion, and later Carboniferous or Mesozoic strike-slip motion. The leading edge of the Humber Arm Allochthon was influenced by both thin-skinned and thick-skinned tectonics throughout the development of the Appalachian orogen.