Gram-positive Bacterium Lactococcus Lactis Research Articles

Special features of microbial cake under high pressure conditions in microfiltration

Here, cell separation from microbial suspensions (gram-negative bacterium Escherichia coli, gram-positive bacterium Lactococcus lactis, and yeast Saccharomyces cerevisiae) was performed by dead-end microfiltration. From the results of three types of experiments, namely constant-rate and constant-pressure filtration, and constant-pressure consolidation, it was revealed that the microfiltration behaviors of microbial suspensions can be described on the basis of the pressure dependences of the average void ratio and specific resistance of the microbial cake. However, under high-pressure conditions, we found that the cake structure of Escherichia coli was changed, and the calculations were inconsistent with constant-rate filtration data. The data, such as constant-rate filtration behaviors, spectra of filtrate, electron micrographs of filter cake, and constant-pressure consolidation behaviors, indicated the possibility of cellular destruction of Escherichia coli under pressures above 700 kPa. In contrast, this phenomenon was not observed at pressures of up to 1000 kPa in yeast with different cell envelope compositions. Cellular destruction affected the filtration performance, and since intracellular water was discharged, the dehydration characteristics of the cake changed significantly. The findings on the properties of microbial cakes under high pressure obtained in this study are useful for improving the efficiency of filtration operations for microbial suspensions and dehydration operations for biological sludge.

Method for Production of Cysteine-Rich Proteins in Lactococcus lactis Expression System.

The Gram-positive bacterium Lactococcus lactis is an ideal expression host for the overproduction of heterologous proteins in a functional form. L. lactis has recently been identified as an efficient Gram-positive cell factory for the production of recombinant proteins and the safety of this production system has been confirmed in multiple clinical trials. Key desirable features of L. lactis include its generally recognized as safe (GRAS) status, long history of safe use in food production, probiotic properties, absence of endotoxins, capacity to secrete stable recombinant protein to the growth medium, the presence of few proteases, and a diverse selection of cloning and inducible expression vectors. Growth of lactococci is rapid, proceeds to high cell densities, and does not require aeration, which facilitates large-scale fermentation. We have previously described the production of several Plasmodium falciparum antigens with varying degrees of predicted structural complexities, those which are considered difficult-to-produce proteins by using L. lactis pH-dependent inducible promoter (P170). The purpose of this chapter is to provide a detailed protocol for the expression of difficult-to-produce proteins, mainly high cysteine-rich proteins, in the soluble form in L. lactis from cloning of the target gene to the determination of expression levels and purification.

Importance of the leader peptide sequence on the lanthipeptide secretion level.

Lanthipeptides are ribosomally synthesized and posttranslationally modified peptides. Their precursor peptide comprises of an N-terminal leader peptide and a C-terminal core peptide. Here, the leader peptide is crucial for enzyme recognition especially for the modification enzymes and acts furthermore as a secretion signal for the lanthipeptide exporter. The core peptide is the target site for the posttranslational modifications and contains dehydrated amino acids and lanthionine rings. Nisin produced by the Gram-positive bacterium Lactococcus lactis is one of the best-studied lanthipeptides and used as a model system to study their modification and secretion processes. Nisin is secreted as a precursor peptide. Here, we present an in vivo secretion analysis of NisT in the absence of the modification machinery allowing the secretion of leader peptide mutants and their impact solely on the secretion activity of NisT. Additionally, we created leader peptide hybrids to provide new insights, how the secretion is effected by unnatural leader peptides. The focus on the secretion activity of the transporter alone enabled us to determine the recognition site of NisT within the leader peptide of nisin.

Conjugation as a Highly Sensitive Assay to Study Group II Intron Splicing In Vivo.

Group II introns are noncoding sequences that interrupt genes, and that must be removed or spliced-out at the RNA level during gene expression. Following the transcription of interrupted genes, group II introns self-splice while concurrently ligating their flanking exons to generate mature mRNAs ready for translation. Ll.LtrB, the model group II intron from the gram-positive bacterium Lactococcus lactis, interrupts the gene coding for a relaxase enzyme that initiates the transfer of mobile elements by conjugation. This functional link between group II intron splicing and conjugative transfer enabled us to engineer highly sensitive splicing assays using the native biological context of Ll.LtrB. The splicing efficiency/conjugation assay was developed to determine the splicing competence of various Ll.LtrB mutants, whereas the splicing selection/conjugation assay was established to isolate splicing-proficient variants from a randomly generated bank of mutated introns.

Signal Peptide Optimization, Cloning, Expression and Characterization of Ce16B Cellobiohydrolase in Lactococcus lactis

Cellobiose is one of the most abundant carbohydrates available in nature which can be used as biofuel in various applications such as food industry, energy production, paper production, etc. with no harm to the environment. One way for a safe decomposition the cellobiose is enzymatic hydrolysis. Cellobiohydrolase enzyme, which is naturally present in some yeasts and bacteria, is capable of decomposing carbohydrates. Because of its low production in its original organism and also high volumes of requirements to this enzyme for industrial usage, there is strong desired to mass-produce of this enzyme using biotechnological approaches. In this study, several signal peptide sequences with Lactococcus originality, with the aim of binding to the cellobiohydrolase gene, were evaluated. In this regard, signalP server, a valid and accurate online tool, was used to determine the most important details including N-terminal (n), hydrophobic (h) and carboxy-terminal (c) regions of signal peptides and their probability. Thereafter, Portparam and Solpro online tools were used to investigate the physico-chemical properties of each signal peptide. Finally, the best peptide signal with the best specificity and the highest D-score was selected for binding to the cellobiohydrolase gene sequence aimed at expression in the Gram-positive bacterium Lactococcus lactis. Final frame of target gen was synthetized and ligated in pBU003 expression vector using double digestion by SalI and XhoI restriction enzymes. Recombinant expression vector was transferred to MC1061 for replication and then transferred into the MG1363 as expressing strain of Lacticoccus lactis. Recombinant proteins were purified from M17 medium using the Ni-NTA Agarose column. Their quantification and qualification examined through Bradford assay and 12% SDS-PAGE respectively. Phosphoric acid-treated cotton as a substrate was used to determine the Ce16B cellobiohydrolase activity at 450 nm absorbance. In silico investigating the signal peptides have led to the choice of the USP45 signal peptide as a powerful secretory signal. Recombinant proteins were successfully expressed in Lactococcus lactis. The concentration of each recombinant protein was determined 0.7 g/l (R2 = 0.989). In vitro assessment of enzymatic activity or recombinant proteins on PC showed 1.89 U (R2: 9941).

Membrane Protein Production in Lactococcus lactis for Structural Studies.

The expression and downstream purification of membrane proteins is the prerequisite for biophysical and structural studies of this major source of therapeutic targets. The gram-positive bacterium Lactococcus lactis is an attractive option for heterologous membrane protein expression and purification thanks to advantageous characteristics such as mild proteolytic activity and small genome size. Vectors designed for gene transcription under the control of inducible promoters are readily available. Specifically, the tightly regulated nisin-inducible gene expression system (NICE) allows to fine-tune the overexpression of different gene products. The expressed protein engineered with a suitable tag can be readily detected and purified from crude membrane extracts. The purpose of this protocol chapter is to detail the procedures of cloning, expression, isolation of the membrane vesicles, and affinity purification of a membrane protein of interest in L. lactis.

Detection of Group II Intron-Generated Chimeric mRNAs in Bacterial Cells.

Chimeric RNAs are the transcripts composed of exons from two separate genes or transcripts. Although the presence of these joined RNA molecules have mainly been documented in a variety of eukaryotes, we recently demonstrated that the Ll.LtrB group II intron, from the gram-positive bacterium Lactococcus lactis, can generate chimeric mRNAs through a novel intergenic trans-splicing pathway. Here we describe the detailed experimental procedures to detect group II intron-generated mRNA-mRNA chimeras from total RNA extracts using stringent reverse transcription conditions along with a reverse splicing-deficient group II intron as a negative control.

Mass-Spectrometry-Based Identification of Cross-Links in Proteins Exposed to Photo-Oxidation and Peroxyl Radicals Using 18O Labeling and Optimized Tandem Mass Spectrometry Fragmentation.

Protein cross-links are formed in regulated biochemical processes in many biological systems, but they are also generated inadvertently via the reactions of exogenous or endogenous oxidants. Site-specific identification and characterization of such cross-links is challenging, and the goal was, therefore, to develop mass-spectrometry-based approaches tailored for proteins subjected to oxidative challenges that also are applicable for the analysis of complex samples. Using trypsin-mediated 18O isotopic labeling, different types of data acquisition workflows, and designated database software tools, we successfully identified tyrosine-tyrosine, tyrosine-tryptophan, tyrosine-lysine, and histidine-lysine cross-links in proteins subjected to sensitizer-mediated photo-oxidation with rose bengal or chemical oxidation with peroxyl radicals generated from the water-soluble compound 2,2'-azobis(2-amidinopropane) dihydrochloride (AAPH). Subsequently, AAPH was also applied to a protein extract from the Gram-positive bacterium Lactococcus lactis, demonstrating the feasibility to identify tyrosine-tyrosine, tyrosine-tryptophan, and tryptophan-tryptophan cross-linked peptides in a complex system. Different fragmentation techniques were evaluated, and it was observed that higher-energy collisional dissociation (HCD) resulted in a higher number of identified cross-link peptides, while electron-transfer dissociation supplemented with HCD (EThcD) generally provides higher fragment ion coverage of the cross-linked peptides.

Expanding the Genetic Code of Lactococcus lactis and Escherichia coli to Incorporate Non-canonical Amino Acids for Production of Modified Lantibiotics.

The incorporation of non-canonical amino acids (ncAAs) into ribosomally synthesized and post-translationally modified peptides, e.g., nisin from the Gram-positive bacterium Lactococcus lactis, bears great potential to expand the chemical space of various antimicrobials. The ncAA Nε-Boc-L-lysine (BocK) was chosen for incorporation into nisin using the archaeal pyrrolysyl-tRNA synthetase–tRNAPyl pair to establish orthogonal translation in L. lactis for read-through of in-frame amber stop codons. In parallel, recombinant nisin production and orthogonal translation were combined in Escherichia coli cells. Both organisms synthesized bioactive nisin(BocK) variants. Screening of a nisin amber codon library revealed suitable sites for ncAA incorporation and two variants displayed high antimicrobial activity. Orthogonal translation in E. coli and L. lactis presents a promising tool to create new-to-nature nisin derivatives.

A Lactococcus lactis expression vector set with multiple affinity tags to facilitate isolation and direct labeling of heterologous secreted proteins

The gram-positive bacterium Lactococcus lactis is a useful host for extracellular protein production. A main advantage of L. lactis over other bacterial expression systems is that lactococcal cells display low levels of autolysis and proteolysis. Previously, we developed a set of vectors for nisin-inducible extracellular production of N- or C-terminally hexa-histidine (His6)-tagged proteins. The present study was aimed at expanding our portfolio of L. lactis expression vectors for protein purification and site-specific labeling. Specifically, we present two new groups of vectors allowing N- or C-terminal provision of proteins with a Strep-tag II or AVI-tag. Vectors for AVI-tagging encode an additional His6-tag for protein purification. Another set of vectors allows removal of N-terminal Strep- or His6-tags from expressed proteins with the tobacco etch virus protease. Two possible applications of the developed vectors are presented. First, we show that Strep-tagged LytM of Staphylococcus aureus in the growth medium of L. lactis can be directly bound to microtiter plates coated with an affinity reagent and used for enzyme-linked immunosorbent assays. Second, we show that the AVI-tagged Sle1 protein from S. aureus produced in L. lactis can be directly biotinylated and fluorescently labeled. The fluorescently labeled Sle1 was successfully applied for S. aureus re-binding studies, allowing subcellular localization by fluorescence microscopy. In conclusion, we have developed a set of expression vectors that enhances the versatility of L. lactis as a system for production of proteins with tags that can be used for affinity purification and site-specific protein labeling.

The structure of Lactococcus lactis thioredoxin reductase reveals molecular features of photo-oxidative damage

The NADPH-dependent homodimeric flavoenzyme thioredoxin reductase (TrxR) provides reducing equivalents to thioredoxin, a key regulator of various cellular redox processes. Crystal structures of photo-inactivated thioredoxin reductase (TrxR) from the Gram-positive bacterium Lactococcus lactis have been determined. These structures reveal novel molecular features that provide further insight into the mechanisms behind the sensitivity of this enzyme toward visible light. We propose that a pocket on the si-face of the isoalloxazine ring accommodates oxygen that reacts with photo-excited FAD generating superoxide and a flavin radical that oxidize the isoalloxazine ring C7α methyl group and a nearby tyrosine residue. This tyrosine and key residues surrounding the oxygen pocket are conserved in enzymes from related bacteria, including pathogens such as Staphylococcus aureus. Photo-sensitivity may thus be a widespread feature among bacterial TrxR with the described characteristics, which affords applications in clinical photo-therapy of drug-resistant bacteria.

The Atomic Structure of the Phage Tuc2009 Baseplate Tripod Suggests that Host Recognition Involves Two Different Carbohydrate Binding Modules.

ABSTRACTThe Gram-positive bacterium Lactococcus lactis, used for the production of cheeses and other fermented dairy products, falls victim frequently to fortuitous infection by tailed phages. The accompanying risk of dairy fermentation failures in industrial facilities has prompted in-depth investigations of these phages. Lactococcal phage Tuc2009 possesses extensive genomic homology to phage TP901-1. However, striking differences in the baseplate-encoding genes stimulated our interest in solving the structure of this host’s adhesion device. We report here the X-ray structures of phage Tuc2009 receptor binding protein (RBP) and of a “tripod” assembly of three baseplate components, BppU, BppA, and BppL (the RBP). These structures made it possible to generate a realistic atomic model of the complete Tuc2009 baseplate that consists of an 84-protein complex: 18 BppU, 12 BppA, and 54 BppL proteins. The RBP head domain possesses a different fold than those of phages p2, TP901-1, and 1358, while the so-called “stem” and “neck” domains share structural features with their equivalents in phage TP901-1. The BppA module interacts strongly with the BppU N-terminal domain. Unlike other characterized lactococcal phages, Tuc2009 baseplate harbors two different carbohydrate recognition sites: one in the bona fide RBP head domain and the other in BppA. These findings represent a major step forward in deciphering the molecular mechanism by which Tuc2009 recognizes its saccharidic receptor(s) on its host.

Statistical optimization of cell disruption techniques for releasing intracellular X-prolyl dipeptidyl aminopeptidase from Lactococcus lactis spp. lactis

X-prolyl dipeptidyl aminopeptidase (PepX) is an intracellular enzyme from the Gram-positive bacterium Lactococcus lactis spp. lactis NRRL B-1821, and it has commercial importance. The objective of this study was to compare the effects of several cell disruption methods on the activity of PepX. Statistical optimization methods were performed for two cavitation methods, hydrodynamic (high-pressure homogenization) and acoustic (sonication), to determine the more appropriate disruption method. Two level factorial design (2FI), with the parameters of number of cycles and pressure, and Box–Behnken design (BBD), with the parameters of cycle, sonication time, and power, were used for the optimization of the high-pressure homogenization and sonication methods, respectively. In addition, disruption methods, consisting of lysozyme, bead milling, heat treatment, freeze–thawing, liquid nitrogen, ethylenediaminetetraacetic acid (EDTA), Triton-X, sodium dodecyl sulfate (SDS), chloroform, and antibiotics, were performed and compared with the high-pressure homogenization and sonication methods. The optimized values of high-pressure homogenization were one cycle at 130MPa providing activity of 114.47mUml−1, while sonication afforded an activity of 145.09mUml−1 at 28min with 91% power and three cycles.In conclusion, sonication was the more effective disruption method, and its optimal operation parameters were manifested for the release of intracellular enzyme from a L. lactis spp. lactis strain, which is a Gram-positive bacterium.

Versatile vector suite for the extracytoplasmic production and purification of heterologous His-tagged proteins in Lactococcus lactis.

Recent studies have shown that the Gram-positive bacterium Lactococcus lactis can be exploited for the expression of heterologous proteins; however, a versatile set of vectors suitable for inducible extracellular protein production and subsequent purification of the expressed proteins by immobilized metal affinity chromatography was so far lacking. Here we describe three novel vectors that, respectively, facilitate the nisin-inducible production of N- or C-terminally hexa-histidine (His6)-tagged proteins in L. lactis. One of these vectors also encodes a tobacco etch virus (TEV) protease cleavage site allowing removal of the N-terminal His6-tag from expressed proteins. Successful application of the developed vectors for protein expression, purification and/or functional studies is exemplified with six different cell wall-bound or secreted proteins from Staphylococcus aureus. The results show that secretory production of S. aureus proteins is affected by the position, N- or C-terminal, of the His6-tag. This seems to be due to an influence of the His6-tag on protein stability. Intriguingly, the S. aureus IsdB protein, which is phosphorylated in S. aureus, was also found to be phosphorylated when heterologously produced in L. lactis, albeit not on the same Tyr residue. This implies that this particular post-translational protein modification is to some extent conserved in S. aureus and L. lactis. Altogether, we are confident that the present vector set combined with the L. lactis expression host has the potential to become a very useful tool in optimization of the expression, purification and functional analysis of extracytoplasmic bacterial proteins.Electronic supplementary materialThe online version of this article (doi:10.1007/s00253-015-6778-8) contains supplementary material, which is available to authorized users.

The Ll.LtrB intron from Lactococcus lactis excises as circles in vivo: insights into the group II intron circularization pathway.

Group II introns are large ribozymes that require the assistance of intron-encoded or free-standing maturases to splice from their pre-mRNAs in vivo. They mainly splice through the classical branching pathway, being released as RNA lariats. However, group II introns can also splice through secondary pathways like hydrolysis and circularization leading to the release of linear and circular introns, respectively. Here, we assessed in vivo splicing of various constructs of the Ll.LtrB group II intron from the Gram-positive bacterium Lactococcus lactis. The study of excised intron junctions revealed, in addition to branched intron lariats, the presence of perfect end-to-end intron circles and alternatively circularized introns. Removal of the branch point A residue prevented Ll.LtrB excision through the branching pathway but did not hinder intron circle formation. Complete intron RNA circles were found associated with the intron-encoded protein LtrA forming nevertheless inactive RNPs. Traces of double-stranded head-to-tail intron DNA junctions were also detected in L. lactis RNA and nucleic acid extracts. Some intron circles and alternatively circularized introns harbored variable number of non-encoded nucleotides at their splice junction. The presence of mRNA fragments at the splice junction of some intron RNA circles provides insights into the group II intron circularization pathway in bacteria.

Membrane protein expression in Lactococcus lactis.

The Gram-positive bacterium Lactococcus lactis has many properties that are ideal for the overproduction of membrane proteins in a functional form. Growth of lactococci is rapid, proceeds to high cell densities, and does not require aeration, which facilitates large-scale fermentation. The available promoter systems are strong and tightly regulated, allowing expression of toxic gene products in a controlled manner. Expressed membrane proteins are targeted exclusively to the cytoplasmic membrane, allowing the use of ionophores, ligands, and inhibitors to study activity of the membrane protein in whole cells. Constructed plasmids are stable and expression levels are highly reproducible. The relatively small genome size of the organism causes little redundancy, which facilitates complementation studies and allows for easier purification. The produced membrane proteins are often stable, as the organism has limited proteolytic capability, and they are readily solubilized from the membrane with mild detergents. Lactococci are multiple amino acid auxotrophs, allowing the incorporation of labels, such as selenomethionine. Among the few disadvantages are the low transformation frequency, AT-rich codon usage, and resistance to lysis by mechanical means, but these problems can be overcome fairly easily. We will describe in detail the protocols used to express membrane proteins in L. lactis, from cloning of the target gene to the isolation of membrane vesicles for the determination of expression levels.

Impact of osmotic stress on protein diffusion in Lactococcus lactis

We measured translational diffusion of proteins in the cytoplasm and plasma membrane of the Gram-positive bacterium Lactococcus lactis and probed the effect of osmotic upshift. For cells in standard growth medium the diffusion coefficients for cytosolic proteins (27 and 582 kDa) and 12-transmembrane helix membrane proteins are similar to those in Escherichia coli. The translational diffusion of GFP in L. lactis drops by two orders of magnitude when the medium osmolality is increased by ∼ 1.9 Osm, and the decrease in mobility is partly reversed in the presence of osmoprotectants. We find a large spread in diffusion coefficients over the full population of cells but a smaller spread if only sister cells are compared. While in general the diffusion coefficients we measure under normal osmotic conditions in L. lactis are similar to those reported in E. coli, the decrease in translational diffusion upon osmotic challenge in L. lactis is smaller than in E. coli. An even more striking difference is that in L. lactis the GFP diffusion coefficient drops much more rapidly with volume than in E. coli. We discuss these findings in the light of differences in turgor, cell volume, crowding and cytoplasmic structure of Gram-positive and Gram-negative bacteria.

Structures and host-adhesion mechanisms of lactococcal siphophages

The Siphoviridae family of bacteriophages is the largest viral family on earth and comprises members infecting both bacteria and archaea. Lactococcal siphophages infect the Gram-positive bacterium Lactococcus lactis, which is widely used for industrial milk fermentation processes (e.g., cheese production). As a result, lactococcal phages have become one of the most thoroughly characterized class of phages from a genomic standpoint. They exhibit amazing and intriguing characteristics. First, each phage has a strict specificity toward a unique or a handful of L. lactis host strains. Second, most lactococcal phages possess a large organelle at their tail tip (termed the baseplate), bearing the receptor binding proteins (RBPs) and mediating host adsorption. The recent accumulation of structural and functional data revealed the modular structure of their building blocks, their different mechanisms of activation and the fine specificity of their RBPs. These results also illustrate similarities and differences between lactococcal Siphoviridae and Gram-negative infecting Myoviridae.

Recombinant protein expression inLactococcus lactisusing the P170 expression system

The use of the Gram-positive bacterium Lactococcus lactis in recombinant protein production has several advantages, including the organism's long history of safe use in food production and the fact that it does not produce endotoxins. Furthermore the current non-dairy L. lactis production strains contain few proteases and can secrete stable recombinant protein to the growth medium. The P170 expression system used for recombinant protein production in L. lactis utilizes an inducible promoter, P170, which is up-regulated as lactate accumulates in the growth medium. We have optimised the components of the expression system, including improved promoter strength, signal peptides and isolation of production strains with increased productivity. Recombinant proteins are produced in a growth medium with no animal-derived components as a simple batch fermentation requiring minimal process control. The accumulation of lactate in the growth medium does, however, inhibit growth and limits the yield from batch and fed-batch processes. We therefore combined the P170 expression system with the REED™ technology, which allows control of lactate concentration by electro-dialysis during fermentation. Using this combination, production of the Staphylococcus aureus nuclease reached 2.5 g L(-1).

Isolation and Characterization of Functional Tripartite Group II Introns Using a Tn5-Based Genetic Screen

BackgroundGroup II introns are RNA enzymes that splice themselves from pre-mRNA transcripts. Most bacterial group II introns harbour an open reading frame (ORF), coding for a protein with reverse transcriptase, maturase and occasionally DNA binding and endonuclease activities. Some ORF-containing group II introns were shown to be mobile retroelements that invade new DNA target sites. From an evolutionary perspective, group II introns are hypothesized to be the ancestors of the spliceosome-dependent nuclear introns and the small nuclear RNAs (snRNAs – U1, U2, U4, U5 and U6) that are important functional elements of the spliceosome machinery. The ability of some group II introns fragmented in two or three pieces to assemble and undergo splicing in trans supports the theory that spliceosomal snRNAs evolved from portions of group II introns.Methodology/Principal FindingsWe used a transposon-based genetic screen to explore the ability of the Ll.LtrB group II intron from the Gram-positive bacterium Lactococcus lactis to be fragmented into three pieces in vivo. Trans-splicing tripartite variants of Ll.LtrB were selected using a highly efficient and sensitive trans-splicing/conjugation screen. We report that numerous fragmentation sites located throughout Ll.LtrB support tripartite trans-splicing, showing that this intron is remarkably tolerant to fragmentation.Conclusions/SignificanceThis work unveils the great versatility of group II intron fragments to assemble and accurately trans-splice their flanking exons in vivo. The selected introns represent the first evidence of functional tripartite group II introns in bacteria and provide experimental support for the proposed evolutionary relationship between group II introns and snRNAs.