Glycol Methyl Ether Methacrylate Research Articles

Surface-Grafted Biocompatible Polymer Conductors for Stable and Compliant Electrodes for Brain Interfaces.

Durable and conductive interfaces that enable chronic and high-resolution recording of neural activity are essential for understanding and treating neurodegenerative disorders. These chronic implants require long-term stability and small contact areas. Consequently, they are often coated with a blend of conductive polymers and are crosslinked to enhance durability despite the potentially deleterious effect of crosslinking on the mechanical and electrical properties. Here the grafting of the poly(3,4 ethylenedioxythiophene) scaffold, poly(styrenesulfonate)-b-poly(poly(ethylene glycol) methyl ether methacrylate block copolymer brush to gold, in a controlled and tunable manner, by surface-initiated atom-transfer radical polymerization (SI-ATRP) is described. This "block-brush" provides high volumetric capacitance (120 F cm─3), strong adhesion to the metal (4h ultrasonication), improved surface hydrophilicity, and stability against 10000 charge-discharge voltage sweeps on a multiarray neural electrode. In addition, the block-brush film showed 33% improved stability against current pulsing. This approach can open numerous avenues for exploring specialized polymer brushes for bioelectronics research and application.

Supramolecularly-Cross-Linked Nanogel Assemblies for On-Demand, Ultrasound-Triggered Chemotherapy.

Stimulating the release of small nanoparticles (NPs) from a larger NP via the application of an exogenous stimulus offers the potential to address the different size requirements for circulation versus penetration that hinder chemotherapeutic drug delivery. Herein, we report a size-switching nanoassembly-based drug delivery system comprised of ultrasmall starch nanoparticles (SNPs, ∼20-50 nm major size fraction) encapsulated in a poly(oligo(ethylene glycol) methyl ether methacrylate) nanogel (POEGMA, ∼150 nm major size fraction) cross-linked via supramolecular PEG/α-cyclodextrin (α-CD) interactions. Upon heating the nanogel using a non-invasive, high-intensity focused ultrasound (HIFU) trigger, the thermoresponsive POEGMA-CD nanoassemblies are locally de-cross-linked, inducing in situ release of the highly penetrative drug-loaded SNPs. HIFU triggering increased the release of nanoassembly-loaded DOX from 17 to 37% after 3 h, a result correlated with significantly more effective tumor killing relative to nanoassemblies in the absence of HIFU or drug alone. Furthermore, 1.5× more total fluorescence was observed inside a tumor spheroid when nanoassemblies prepared with fluorophore-labeled SNPs were triggered with HIFU relative to the absence of HIFU. We anticipate this strategy holds promise for delivering tunable doses of chemotherapeutic drugs both at and within a tumor site using a non-invasive triggering approach.

Biocompatibility of mussel-inspired water-soluble tissue adhesives.

Wound closure in surgeries is traditionally achieved using invasive methods such as sutures and staples. Adhesion-based wound closure methods such as tissue adhesives, sealants, and hemostats are slowly replacing these methods due to their ease of application. Although several chemistries have been developed and used commercially for wound closure, there is still a need for better tissue adhesives from the point of view of toxicity, wet-adhesion strength, and long-term bonding. Catechol chemistry has shown great promise in developing wet-set adhesives that meet these criteria. Herein, we have studied the biocompatibility of a catechol-based copolymer adhesive, poly([dopamine methacrylamide]-co-[methyl methacrylate]-co-[poly(ethylene glycol) methyl ether methacrylate]) or poly(catechol-MMA-OEG), which is soluble in water. The adhesive was injected subcutaneously in a mouse model on its own and in combination with a sodium periodate crosslinker. After 72 h, 4 weeks, and 12 weeks, the mice were euthanized and subjected to histopathological analysis. Both adhesives were present and still palpable at the end of 12 weeks. The moderate inflammation observed for the poly(catechol-MMA-OEG) cohort at 72 h had reduced to mild inflammation at the end of 12 weeks. However, the moderate inflammatory response observed for the poly(catechol-MMA-OEG) + crosslinker cohort at 72 h had not subsided at 12 weeks.

Effect of Embedded g-C3N4 Nanosheets on the Hydration and Thermal Response Behavior of Cross-Linked Thermoresponsive Copolymer Films.

The effect of embedded graphitic carbon nitride (g-C3N4) nanosheets on hydration and thermal response behavior of cross-linked thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate), abbreviated as P(MA-co-MA300), thin films is probed by white light interferometry. Compared with that of the cross-linked pure P(MA-co-MA300) films, the surface roughness of the cross-linked hybrid films is slightly increased, which is caused by the minor aggregation of g-C3N4 nanosheets during the spin-coating process. After exposure to a water vapor atmosphere, both cross-linked pure and hybrid films can absorb water and swell. However, the introduction of g-C3N4 not only induces a larger hydration extent but also triggers a nonlinear transition behavior upon heating. This prominent difference might be related to the residual hydrophilic groups (-NH2 and N-H) on the surface of g-C3N4 nanosheets, which enhance the interaction and absorption capability for water molecules in the hybrid films. Upon further increasing the amount of embedded g-C3N4 nanosheets in films, more hydrogen bonds are formed and a larger hydration extent of films is observed. To break all of the hydrogen bonds in films, a higher transition temperature (TT) is required. The observed hydration and transition behaviors of hybrid films can be used to design hydrogel-based films for hydrogen evolution or wastewater treatment.

A New Class of Polyion Complex Vesicles (PIC-somes) to Improve Antimicrobial Activity of Tobramycin in Pseudomonas Aeruginosa Biofilms.

Pseudomonas aeruginosa (PA) is a major healthcare concern due to its tolerance to antibiotics when enclosed in biofilms. Tobramycin (Tob), an effective cationic aminoglycoside antibiotic against planktonic PA, loses potency within PA biofilms due to hindered diffusion caused by interactions with anionic biofilm components. Loading Tob into nano-carriers can enhance its biofilm efficacy by shielding its charge. Polyion complex vesicles (PIC-somes) are promising nano-carriers for charged drugs, allowing higher drug loadings than liposomes and polymersomes. In this study, a new class of nano-sized PIC-somes, formed by Tob-diblock copolymer complexation is presented. This approach replaces conventional linear PEG with brush-like poly[ethylene glycol (methyl ether methacrylate)] (PEGMA) in the shell-forming block, distinguishing it from past methods. Tob paired with a block copolymer containing hydrophilic PEGMA induces micelle formation (PIC-micelles), while incorporating hydrophobic pyridyldisulfide ethyl methacrylate (PDSMA) monomer into PEGMA chains reduces shell hydrophilicity, leads to the formation of vesicles (PIC-somes). PDSMA unit incorporation enables unprecedented dynamic disulfide bond-based shell cross-linking, significantly enhancing stability under saline conditions. Neither PIC-somes nor PIC-micelles show any relevant cytotoxicity on A549, Calu-3, and dTHP-1 cells. Tob's antimicrobial efficacy against planktonic PA remains unaffected after encapsulation into PIC-somes and PIC-micelles, but its potency within PA biofilms significantly increases.

Photo-controlled organocatalyzed radical polymerization synthesis of well-defined azlactone-functionalized polymers and its (bio)conjugated application

Well-defined azlactone-functionalized polymers have emerged as highly valuable precursors for the synthesis of (bio)molecules-conjugated materials. The development of polymerization process working at moderate temperature or ambient temperature and without use of metal catalysts or odorous agents for the synthesis of azlactone-functionalized polymers would be attractive, particularly in biomedical applications. In the present study, we have successfully copolymerized 2-vinyl-4,4-dimethylazlactone (VDM) and methacrylate monomers such as methyl methacrylate and poly(ethylene glycol) methyl ether methacrylate (mPEGMA) by photoinduced reversible complexed mediated polymerization (photo-RCMP). The polymerization was conducted at a wavelength of 365 nm and was well controlled with an initial ratio of VDM as high as of 20 mol%. The copolymer molecular weight and its dispersity (Ð < 1.3) was well controlled during the whole process and the system was perfectly a photo-switchable “on/off” system with no polymerization took place when the system was not irradiated. In addition, the ability of the resulting amine-reactive copolymer to be engaged in post-polymerization modifications was demonstrated using furfurylamine and l-carnosine.

Deciphering the Lipid-Random Copolymer Interactions and Encoding Their Properties to Design a Hybrid System.

Lipid/copolymer colloidal systems are deemed hybrid materials with unique properties and functionalities. Their hybrid nature leads to complex interfacial phenomena, which have not been fully encoded yet, navigating their properties. Moving toward in-depth knowledge of such systems, a comprehensive investigation of them is imperative. In the present study, hybrid lipid/copolymer structures were fabricated and examined by a gamut of techniques, including dynamic light scattering, fluorescence spectroscopy, cryogenic transmission electron microscopy, microcalorimetry, and high-resolution ultrasound spectroscopy. The biomaterials that were mixed for this purpose at different ratios were 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine and four different linear, statistical (random) amphiphilic copolymers, consisting of oligo(ethylene glycol) methyl ether methacrylate as the hydrophilic comonomer and lauryl methacrylate as the hydrophobic one. The colloidal dispersions were studied for lipid/copolymer interactions regarding their physicochemical, morphological, and biophysical behavior. Their membrane properties and interactions with serum proteins were also studied. The aforementioned techniques confirmed the hybrid nature of the systems and the location of the copolymer in the structure. More importantly, the random architecture of the copolymers, the hydrophobic-to-hydrophilic balance of the nanoplatforms, and the lipid-to-polymer ratio are highlighted as the main design-influencing factors. Elucidating the lipid/copolymer interactions would contribute to the translation of hybrid nanoparticle performance and, thus, their rational design for multiple applications, including drug delivery.

Hybrid Nanoparticles from Random Polyelectrolytes and Carbon Dots.

The present study concerns the preparation of hybrid nanostructures composed of carbon dots (CDs) synthesized in our lab and a double-hydrophilic poly(2-dimethylaminoethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-OEGMA)) random copolymer through electrostatic interactions between the negatively charged CDs and the positively charged DMAEMA segments of the copolymer. The synthesis of P(DMAEMA-co-OEGMA) copolymer was conducted through RAFT polymerization. Furthermore, the copolymer was converted into a strong cationic random polyelectrolyte through quaternization of the amine groups of DMAEMA segments with methyl iodide (CH3I), and it was subsequently utilized for the complexation with the carbon dots. The molecular, physicochemical, and photophysical characterization of the aqueous solution of the copolymers and their hybrid nanoparticles was conducted using dynamic and electrophoretic light scattering (DLS, ELS) and spectroscopic techniques, such as UV-Vis, fluorescence (FS), and FT-IR spectroscopy. In addition, studies of their aqueous solution using DLS and ELS showed their responsiveness to external stimuli (pH, temperature, ionic strength). Finally, the interaction of selected hybrid nanoparticles with iron (III) ions was confirmed through FS spectroscopy, demonstrating their potential application for heavy metal ions sensing.

Rapid attainment of full wettability through surface PEGylation of hydrophobic polyvinylidene fluoride membranes via spray-coating for enhanced anti-biofouling performances

This manuscript explores the development of antifouling membranes fabricated by vapor-induced phase separation (VIPS) process and their spray-coating modification with an aqueous solution of a copolymer comprising butyl methacrylate and poly(ethylene glycol) methyl ether methacrylate, designated as poly(BMA-r-PEGMA). An initial optimization phase focused on improving the modification quality, with the aim of enhancing the wettability on both the top and bottom surfaces of the membranes, despite spraying on the top surface only. Our findings reveal that a sprayed solution concentration of 10 mg/mL, a pressure of 0.25 MPa, and a scan rate of 3000 mm/min achieved a decrease in water contact angle to 0 in less than 12 s for both membrane surfaces (the top surface directly exposed to the spray, and the bottom surface facing the instrument stage), suggesting that the spray-coating modifies the entire membrane’s bulk. The presence of the copolymer on both surfaces was also evidenced by FTIR and XPS tests. Further biofouling assessments demonstrated the performances of the optimized membrane (OM). In static attachment tests, the OM exhibited a high reduction in Escherichia coli adhesion, with less than 10 % adhering bacteria, compared to unmodified membranes. During the filtration of bacteria-containing wastewater, the OM boasted a flux recovery ratio approaching 60 % (against less than 40 % for a commercial hydrophilic membrane), a rejection rate of 99.3 %, and a water permeability of 2500 LMH/bar. Moreover, the OM was stable over a 4-week period, with a resistance to E. coli attachment remaining similar to prior immersion. These findings underscore the significant potential of spray-coating to develop stable and effective antifouling microfiltration membranes for the removal of microorganisms from wastewater.

Asymmetric Aldol Reactions Catalyzed by Polymeric Self-Assembly with Side-Chain Dipeptide Pendants.

To explore the role of proline amide moieties in polymer-supported organocatalysts, side-chain l-proline-l-alanine (Pro-Ala) dipeptide-containing block copolymers were synthesized, and their catalytic potential for the aldol reaction was explored. The dipeptide monomer (Boc-Pro-Ala-HEMA) was polymerized to prepare block copolymers in the presence of hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA) and hydrophobic poly(methyl methacrylate) (PMMA) macro-chain transfer agents. Boc group expulsion from the block copolymers produced double hydrophilic PPEGMA-b-P(Pro-Ala-HEMA) (1b) and amphiphilic PMMA-b-P(Pro-Ala-HEMA) (1c) polymers. The solution behaviors of the polymers were studied by various physical techniques, which showed the formation of self-assembled aggregates of 1c in water and N,N-dimethylformamide (DMF)/water solvent mixtures. These polymers are used as organocatalysts during the aldol reaction of cyclohexanone and 4-nitrobenzaldehyde in different solvent polarities, catalyst loadings, temperatures, and reaction times. This work emphasizes superior catalytic activity of 1c at lower catalyst loadings (5%) while maintaining high conversion (95%) and enantioselectivity (94%) across multiple recycling cycles in DMF/water at a 3:1 ratio (v/v).

Four-Component Statistical Copolymers by RAFT Polymerization.

This manuscript serves as the starting point for in-depth research of multicomponent, statistical, methacrylate-based copolymers that potentially mimic the behavior of proteins in aqueous solutions. These synthetic macromolecules are composed of specially chosen comonomers: methacrylic acid (MAA), oligoethylene glycol methyl ether methacrylate (OEGMA475), 2-(dimethylamino)ethyl methacrylate (DMAEMA) and benzyl methacrylate (BzMA). Monomer choice was based on factors such as the chemical nature of pendant functional groups, the polyelectrolyte/polyampholyte and amphiphilic character and the overall hydrophobic-hydrophilic balance (HLB) of the obtained quaterpolymers. Their synthesis was achieved via a one-pot reversible addition fragmentation chain transfer (RAFT) polymerization in two distinct compositions and molecular architectures, linear and hyperbranched, respectively, in order to explore the effects of macromolecular topology. The resulting statistical quaterpolymers were characterized via 1H-NMR and ATR-FTIR spectroscopies. Their behavior in aqueous solutions was studied by dynamic (DLS) and electrophoretic light scattering (ELS) and fluorescence spectroscopy (FS), producing vital information concerning their self-assembly and the structure of the formed aggregates. The physicochemical studies were extended by tuning parameters such as the solution pH and ionic strength. Finally, the quaterpolymer behavior in FBS/PBS solutions was investigated to test their colloid stability and biocompatibility in an in vivo-mimicking, biological fluid environment.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with β-Cyclodextrin.

This study investigates unexpected competitive host-guest interactions of β-cyclodextrin (β-CD), which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) and poly(glycerol mono methacrylate). Systematic structural modifications of the polymer provide insight into the host-guest interaction with β-CD and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer polymerization or intentionally implemented molecular recognition units such as arylazopyrazole photoswitches.

Synergistic Drug-Loaded Shear-Thinning Star Polymer Hydrogel Facilitates Gastrointestinal Lesion Resection and Promotes Wound Healing.

Easy injection, long-lasting barrier, and drug loading are the critical properties of submucosal injection materials for endoscopic surgery. However, conventional injectable polymers face challenges in simultaneously attaining these properties due to the inherent conflict between injectability and in situ stability. Here, a multi-arm star polymer hydrogel (denoted as βCP hydrogel) with long-lasting submucosal barrier (exceeding 120 min), rapid hemostasis, and sustained antibacterial properties is successfully developed by grafting poly(oligo(ethylene glycol) methyl ether methacrylate)(PEGMA) side-chains from β-CD via atom transfer radical polymerization (ATRP). During the onset of shearing, βCP hydrogel experiences the unwinding of polymer side-chains between neighboring star polymers, which facilitates the process of endoscopic injectability. After submucosal injection, βCP hydrogel undergoes the winding of polymer side-chains, thereby establishing a long-lasting barrier cushion. Meanwhile, owing to its distinctive structures with a hydrophobic inner cavity and an outer layer of hydrophilic polymer side-chains, βCP hydrogel enables simultaneous loading and on-demand release of diverse categories ofdrugs. This unique performance can adapt to the diverse demands during different stages of wound healing in a porcine endoscopic surgery model. These results indicate an appealing prospect for new application of star polymers as a good submucosal injection material in endoscopic treatments.

Theranostic Bottle-Brush Polymers Tailored for Universal Solid-Tumor Targeting.

Designing an efficient nanocarrier to target multiple types of cancer remains a major challenge in the development of cancer nanomedicines. The majority of systemically administered nanoparticles (NPs) are rapidly cleared by the liver, resulting in poor tumor-targeting efficiency and severe side effects. Here, we present a delicately tailored design and synthesis of fluorescent bottle-brush polymers and screen nine derived NPs, each varying in size and surface coatings, for tumor imaging and targeted delivery. Our optimized polymer bearing (oligo(ethylene glycol) methyl ether methacrylate) in the side chains shows reduced macrophage uptake, prolonged blood-circulation time (up to 27 h), and exceptionally high accumulation in the tumor compared to the liver, elucidating an immune-evasion-induced tumor-targeting mechanism. High tumor accumulation significantly improved the antitumor efficacy. The outstanding tumor-targeting ability has been further validated across five distinct tumor models, including orthotopic glioblastoma and pancreatic cancer, which demonstrate the universality of our polymeric nanocarrier for tumor-targeting delivery.

ABC block copolymer micelles driving the thermogelation: Scattering, imaging and spectroscopy

Thermoresponsive polymers have attracted much scientific attention due to their capacity for temperature-driven hydrogel formation. For biomedical applications, such as drug delivery, this transition should be tuned below body temperature to facilitate controlled and targeted drug release. We have recently developed a thermoresponsive polymer that forms gel at low concentrations (2 w/w%) in aqueous media and offers a cost-effective alternative to thermoresponsive systems currently being applied in clinics. This polymer is an ABC triblock terpolymer, where A, B, and C correspond to oligo(ethylene glycol) methyl ether methacrylate with average Mn 300 g mol−1 (OEGMA300), n-butyl methacrylate (BuMA), and di(ethylene glycol) methyl ether methacrylate (DEGMA). To investigate the self-assembly and the gelation mechanism in diluted solutions, we used small-angle neutron scattering (SANS) on 1 w/w% (below the gelation concentration) and 5 w/w% solutions (above the gelation concentration). As a comparison, we also investigated the solutions of the most studied thermoresponsive polymer, namely, Pluronic F127, an ABA triblock bipolymer made of ethylene glycol (A) and propylene glycol (B) blocks. SANS revealed that the in-house synthesised polymer forms elliptical cylinders, whose length increases significantly with temperature. In contrast, Pluronic F127 solutions form core-shell spherical micelles, which slightly elongate with temperature. Transmission electron microscopy images support the SANS findings, with tubular/worm structures being present. Variable-temperature circular dichroism (CD) and proton nuclear magnetic resonance (1H NMR) spectroscopy experiments reveal insights on the tacticity, structural changes, and molecular origin of the self-assembly.

Anthrapyrazolone functionalized Oligo(ethylene glycol)methyl ether methacrylates based fluorescent polymeric hydrogel for selective detection of Tetracycline drug

Tetracycline (TC) antibiotics are essential for treating bacterial infections; however, overuse and improper disposal place the environment in danger and promote the growth of drug-resistant microorganisms. Monitoring their impact on living organisms is vital. Polymeric-based hydrogels offer promise in antibiotic detection due to their versatility and biocompatibility, despite their uncommon use for this purpose. In this study, we have synthesized a fluorescent polymeric hydrogel, P(OEGMA-co-DIMA) utilizing oligo(ethylene glycol)methyl ether methacrylates (OEGMA) and laboratory-synthesized fluorescent anthrapyrazolone containing monomer, 2-(benzo[1,2,3-cd:4,5,6-c’d]bis(indazole)-2(7H)-yl)ethyl methacrylate (DIMA) for the fluorometric detection of TC in the aqueous medium. The P(OEGMA-co-DIMA) hydrogel exhibited exceptional affinity towards TC while exhibiting high selectivity. The chemosensing behavior of the hydrogel was also compared with the DIMA monomer. Upon adding TC, emission analysis revealed a notable quenching in the emission intensity of the P(OEGMA-co-DIMA) hydrogel as well as the DIMA monomer. The Stern Volmer rate constants (Ksv) of the hydrogel (Ksv = 9.99 x 103 M−1) in water and DIMA (Ksv = 25.63 x 103 M−1) in acetonitrile showed a higher quenching rate constant with a limit of detections (LODs) of 1.3 nM and 0.11 nM. Turn-off fluorescence behavior occurs via a static quenching mechanism through a photoinduced electron transfer process and intermolecular hydrogen bonding. To validate the selectivity, the interference analyses in an aqueous medium with different antibiotics are provided. To rationalize the real-time applicability of the hydrogel, studies were extended to water samples obtained from deionized water, tap water, lake water, and also in milk samples. The recovery rate and LOD for real samples ranged from 83.8% to 111% and 0.83 to 3.6 nM, respectively.

Closely Packed Core-Shell Micelle Structures of Double Hydrophilic Miktoarm Star Copolymers at the Air-Water Interface.

The aggregation behavior of amphiphilic block copolymers at the air-water interface has been extensively studied, but less attention was given to that of star copolymers. In this work, we studied the interfacial aggregation behavior of two double hydrophilic pH- and temperature-responsive miktoarm star copolymers of poly[di(ethylene glycol) methyl ether methacrylate]-poly[2-(dimethylamino)ethyl methacrylate] (PDEGMA3-PDMAEMA3 and PDEGMA4-PDMAEMA7, the subscripts denote arm numbers) with different molecular weights. The effects of subphase pH and temperature on the monolayer isotherms and hysteresis curves of the two star copolymers and the morphologies of their Langmuir-Blodgett (LB) films were studied by the Langmuir film balance technique and atomic force microscopy, respectively. At the air-water interface, the two star copolymers tend to form closely packed micelles. These micelles exhibit a core-shell structure, where the small hydrophobic core consists of cross-linker of ethylene glycol dimethacrylate (EGDMA) and the carbon backbones of PDEGMA and PDMAEMA arms and the short hydrophilic shell is composed of di(ethylene glycol) and tertiary amine side groups. With increasing subphase pH, the surface pressure versus molecular area isotherms shift toward larger mean molecular areas as a result of the enhanced interface adsorption of nonprotonated tertiary amine groups. The isotherm shift of PDEGMA3-PDMAEMA3 monolayers is primarily attributed to high density of tertiary amine groups in the shells, while that of PDEGMA4-PDMAEMA7 is mainly attributed to high density of di(ethylene glycol) groups in the shells. The hysteresis degrees in the monolayers of the two copolymers under alkaline and neutral conditions are greater than those under acidic conditions due to the decreased protonation degree of the tertiary amine groups. At 10 °C, the mobility of the shells is poor and the isotherms are located on the right. Above the lower critical solution temperature, di(ethylene glycol) groups contract, which causes a slight shift of the isotherms toward smaller mean molecular areas.

Constructing the Polymer Molecules to Regulate the Electrode/Electrolyte Interface to Enhance Lithium-Metal Battery Performance.

Lithium-ion batteries, with high energy density and long cycle life, have become the battery of choice for most vehicles and portable electronic devices; however, energy density, safety and cycle life require further improvements. Single-functional group electrolyte additives are very limited in practical applications, a ternary polymer bifunctional electrolyte additive copolymer (acrylonitrile-butyl hexafluoro methacrylate- poly (ethylene glycol) methacrylate- methyl ether) (PMANHF) was synthesized by free radical polymerization of acrylonitrile, 2, 2, 3, 4, 4, 4-hexafluorobutyl methacrylate and poly (ethylene glycol) methyl ether methacrylate. A series of characterizations show that in Li metal anodes, the preferential reduction of PMANHF is conducive to the formation of a uniform and stable solid electrolyte interphase layer, and Li deposition is uniform and dense. At the NCM811 cathode, a film composed of LiF- and Li3N-rich is formed at the cathode-electrolyte interface, mitigating the side reaction at the interface. At 1.0 mA cm-2, the Li/Li cell can be stabilized for 1000 cycles. In addition, the Li/NCM811 cell can stabilize 200 cycles with a cathode capacity of 153.7 mAh g-1, with the capacity retention of 89.93 %, at a negative/positive capacity ratio of 2.5. This study brings to light essential ideas for the fabrication of additives for lithium-metal batteries.

Dendritic Polymer-Based Nanomedicines Remodel the Tumor Stroma: Improve Drug Penetration and Enhance Antitumor Immune Response.

The dense extracellular matrix (ECM)insolidtumors, contributed by cancer-associated fibroblasts (CAFs), hinders penetration of drugs and diminishes their therapeutic outcomes. A sequential treatment strategy of remodeling the ECM via a CAF modifier (dasatinib, DAS) is proposed to promote penetration of an immunogenic cell death (ICD) inducer (epirubicin, Epi) via apoptotic vesicles, ultimately enhancing the treatment efficacy against breast cancer. Dendritic poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA)-based nanomedicines (poly[OEGMA-Dendron(G2)-Gly-Phe-Leu-Gly-DAS] (P-DAS) and poly[OEGMA-Dendron(G2)-hydrazone-Epi] (P-Epi)) are developed for sequential delivery of DAS and Epi, respectively. P-DAS reprograms CAFs to reduce collagen by downregulating collagen anabolism and energy metabolism, thereby reducing the ECM deposition. The regulated ECM can enhance tumor penetration of P-Epi to strengthen its ICD effect, leading to an amplified antitumor immune response. In breast cancer-bearing mice, this approach alleviates the ECM barrier, resulting in reduced tumor burden and increased cytotoxic T lymphocyte infiltration, and more encouragingly, synergizes effectively with anti-programmed cell death 1 (PD-1) therapy, significantly inhibiting tumor growth and preventing lung metastasis. Furthermore, systemic toxicity is barely detectable after sequential treatment with P-DAS and P-Epi. This approach opens a new avenue for treating desmoplastic tumors by metabolically targeting CAFs to overcome the ECM barrier.

Flowmicro In-Line Analysis-Driven Design of Reactions Mediated by Unstable Intermediates: Flash Monitoring Approach.

The direct observation of reactive intermediates is an important issue for organic synthesis. However, intermediates with an extreme instability are hard to be monitored by common spectroscopic methods such as FTIR. We have developed synthetic method utilizing flow microreactors, which enables a generation and reactions of unstable intermediates. Herein we report that, based on our flowmicro techniques, we developed an in-line analysis method for reactive intermediates in increments of milliseconds. We demonstrated the direct observation of the living and dead species of the anionic polymerization of alkyl methacrylates. The direct information of the living species enabled the anionic polymerization and copolymerization of oligo(ethylene glycol) methyl ether methacrylates, which is the important but difficult reaction in the conventional method.