Global Precipitation Measurement Core Research Articles

Precipitation Characteristics at Different Developmental Stages of the Tibetan Plateau Vortex in July 2021 Based on GPM-DPR Data

The Tibetan Plateau vortex (TPV), as an α-scale mesoscale weather system, often brings severe weather conditions like torrential rain and severe convective storms. Based on the detections from the Global Precipitation Measurement (GPM) Core Observatory’s Dual-frequency Precipitation Radar (DPR) and the FY-4A satellite’s Advanced Geostationary Radiation Imager (AGRI), combined with ERA5 reanalysis data, the precipitation characteristics of a TPV moving eastward during 8–13 July 2021 at different developmental stages are explored in this study. It was clear that the near-surface precipitation rate of the TPV during the initial stage at the eastern Tibetan Plateau (TP) was below 1 mm·h−1, implying overall weak precipitation dominated by stratiform clouds. After moving out of the TP, the radar reflectivity factor (Ze), precipitation rate, and normalized intercept parameter (dBNw) significantly increased, while the proportion of convective clouds gradually rose. Following the TPV movement, the distribution range and vertical thickness of Ze, mass-weighted mean diameter (Dm), and dBNw tended to increase. The high-frequency region of Ze appeared at 15–20 dBZ, while Dm and dBNw occurred at around 1 mm and 33 mm−1·m−3, respectively. Near the melting layer, Ze was characterized by a significant increase due to the aggregation and melting of ice crystals. The precipitation rate of convective clouds was generally greater than that of stratiform clouds, whilst both of them increased during the movement of the TPV. Particularly, at 01:00 on 12 July, there was a significant increase in the precipitation rate and Dm of convective clouds, while dBNw noticeably decreased. These findings could provide valuable insights into the three-dimensional structure and microphysical characteristics of the precipitation during the movement of the TPV, contributing to a better understanding of cloud precipitation mechanisms.

Reconstruction of 3D DPR Observations Using GMI Radiances

AbstractThree‐dimensional global precipitation observation is crucial for understanding climate and weather dynamics. While spaceborne precipitation radars provide precise but limited observations, passive microwave imagers are available much more frequently. In this study, we propose a deep learning approach to reconstruct active radar observations using passive microwave radiances. We introduce the Hybrid Deep Neural Network (HDNN) model, which utilizes reflectivity profiles from the Dual‐frequency Precipitation Radar (DPR) onboard the Global Precipitation Measurement (GPM) Core Observatory Satellite as the “target” and combines radiances from the GPM Microwave Imager (GMI) with supplementary reanalysis data to serve as the “features.” Results underscore the HDNN's exemplary performance, with a root mean square error below 4 dBZ across all altitude levels, and a consistent accuracy across different precipitation types. Its efficacy is further illustrated when applied to typhoon cases of Haishen and Khanun, emerging as a superior tool for capturing 3D structures of expansive precipitation systems.

Comparative Analysis of the Latest Global Oceanic Precipitation Estimates from GPM V07 and GPCP V3.2 Products

Abstract Satellites bring opportunities to quantify precipitation amount and distribution over the globe, critical to understanding how the Earth system works. The amount and spatial distribution of oceanic precipitation from the latest versions (V07 and the previous version) of the Global Precipitation Measurement (GPM) Core Observatory instruments and selected members of the constellation of passive microwave sensors are quantified and compared with other products such as the Global Precipitation Climatology Project (GPCP V3.2); the Merged CloudSat, TRMM, and GPM (MCTG) climatology; and ERA5. Results show that GPM V07 products have a higher precipitation rate than the previous version, except for the radar-only product. Within ∼65°S–65°N, covered by all of the instruments, this increase ranges from about 9% for the combined radar–radiometer product to about 16% for radiometer-only products. While GPM precipitation products still show lower mean precipitation rate than MCTG (except over the tropics and Arctic Ocean), the V07 products (except radar-only) are generally more consistent with MCTG and GPCP V3.2 than V05. Over the tropics (25°S–25°N), passive microwave sounders show the highest precipitation rate among all of the precipitation products studied and the highest increase (∼19%) compared to their previous version. Precipitation products are least consistent in midlatitude oceans in the Southern Hemisphere, displaying the largest spread in mean precipitation rate and location of latitudinal peak precipitation. Precipitation products tend to show larger spread over regions with low and high values of sea surface temperature and total precipitable water. The analysis highlights major discrepancies among the products and areas for future research.

Vertical structure of tropical cyclone precipitation over the North Indian Ocean: a spaceborne precipitation radar perspective

ABSTRACT Spaceborne precipitation radars provide an unprecedented opportunity to study three-dimensional structure of precipitation, particularly over the open ocean where in-situ observations are rather meagre. In this study, instantaneous surface precipitation characteristics and their vertical structures during the tropical cyclones (TCs) over the North Indian Ocean (NIO) between 2014 and 2022 have been analysed using the dual-frequency precipitation radar onboard the Global Precipitation Measurement Core Observatory. Although stratiform precipitation accounts for more than 70% of total TC surface precipitation area, convective precipitation contributes about half of the total TC surface precipitation amount over the NIO. About 90% of stratiform TC precipitation area yields surface precipitation of less than 10 mm/hour. The vertical structures of stratiform and convective TC precipitation vary with surface precipitation intensity and have nearly similar characteristics over both basins of the NIO. This preliminary quantitative TC precipitation analysis would be useful for better understanding of precipitation processes during TCs over the NIO, and for further advancement in numerical models through improved parameterization schemes for TC precipitation forecasting.

Espresso: A Global Deep Learning Model to Estimate Precipitation from Satellite Observations

Estimating precipitation is of critical importance to climate systems and decision-making processes. This paper presents Espresso, a deep learning model designed for estimating precipitation from satellite observations on a global scale. Conventional methods, like ground-based radars, are limited in terms of spatial coverage. Satellite observations, on the other hand, allow global coverage. Combined with deep learning methods, these observations offer the opportunity to address the challenge of estimating precipitation on a global scale. This research paper presents the development of a deep learning model using geostationary satellite data as input and generating instantaneous rainfall rates, calibrated using data from the Global Precipitation Measurement Core Observatory (GPMCO). The performance impact of various input data configurations on Espresso was investigated. These configurations include a sequence of four images from geostationary satellites and the optimal selection of channels. Additional descriptive features were explored to enhance the model’s robustness for global applications. When evaluated against the GPMCO test set, Espresso demonstrated highly accurate precipitation estimation, especially within equatorial regions. A comparison against six other operational products using multiple metrics indicated its competitive performance. The model’s superior storm localization and intensity estimation were further confirmed through visual comparisons in case studies. Espresso has been incorporated as an operational product at Météo-France, delivering high-quality, real-time global precipitation estimates every 30 min.

Removing Interfering Signals in Spaceborne Radar Data for Precipitation Detection at Very High Altitudes

Abstract This study investigated the effects of interfering signals on high-altitude precipitation extraction from spaceborne precipitation radar data. Data analyses were performed on the products of the Tropical Rainfall Measuring Mission Precipitation Radar (TRMM PR) and the Global Precipitation Measurement Core Observatory Dual-Frequency Precipitation Radar (GPM DPR) to clarify the effects of removing radio interferences and mirror images, particularly focusing on deep precipitation detection. The TRMM PR acquired precipitation data up to an altitude of approximately 20 km and occasionally captured interferences from artificial radio transmissions in specific areas. Artifacts could be distinguished as isolated profiles exhibiting almost constant radar reflectivity. The number of interferences affecting the TRMM PR gradually increased during the operation period of 1998–2013. A filter was introduced to separate the observed profiles into deep storms that reach the upper observation altitude and contamination caused by radio interference. The former frequently appeared over the Sahel area, where the observation upper limits are lowest. The removal of the latter, radio interference, improved the detection accuracy of the mean precipitation at high altitudes and considerably influenced specific low-precipitation areas such as the Middle East. This spatial feature–based filter allowed us to evaluate the results of screening based on noise limits that are implemented in standard algorithms. The GPM DPR Ku-band radar product contained other unwanted echoes due to the mirror images appearing as second-trip echoes contaminating the high-altitude statistics. Such second-trip echoes constitute a major portion of the echoes observed near the highest altitudes of deep storms. Significance Statement Understanding the current state of separation of naturally occurring precipitation signals from artificial interference signals in spaceborne radar data at altitudes of approximately 20 km is critical for gaining a comprehensive picture of the intensity and structure of precipitation systems. In the case of the TRMM PR data, artifacts could be distinguished as isolated profiles with an almost constant radar reflectivity, and interferences gradually increased during the operation period. The removal of radio interference considerably affects the statistics of extremely deep storms. Improved algorithms and observation techniques have expanded the observation coverage associated with the GPM DPR KuPR data, but there are interferences (mirror images) that should be removed for a thorough discussion of very high-altitude precipitation.

Quantification of Precipitation and Latent Heating Associated with Northern Hemisphere Winter Extratropical Cyclones Using the GPM KuPR

Abstract The four-dimensional characteristics of precipitation and latent heating associated with Northern Hemisphere winter extratropical cyclones (ETCs) are quantitatively analyzed using over 1000 ETCs observed by the Ku-band radar on board the Global Precipitation Measurement (GPM) Core Observatory. We find that the maximum precipitation amount is observed before the minimum central pressure of ETCs (developing stage), independent of the deepening ratio. A key finding is that a cyclone in the developing stage has two large precipitation areas with contrasting precipitation characteristics. One is observed on the forward-left side of ETCs, collocating with warm fronts (Area X). The other is identified on the right-hand side of the ETC center in association with the warm sector and cold fronts (Area Y). These areas become unclear in the mature stage and disappear in the decaying stage. Many stratiform precipitation pixels weaker than 5 mm h−1 compose the large precipitation amount in Area X, with a stratiform-to-total precipitation ratio of more than 90%. In contrast, intense convective precipitation pixels of over 20 mm h−1 are observed about 3 times more in Area Y than in Area X, resulting in a stratiform-to-total precipitation ratio of 65%–80%. The most intense precipitation around ETCs is observed in this area. A larger latent heating maximum at 3.5-km altitude and a higher near-surface cooling rate in Area X result in a higher vertical heating gradient compared to Area Y. The contrasting characteristics between the two areas are more pronounced in the rapidly developing ETCs. Significance Statement Statistical analyses are conducted to elucidate the four-dimensional structures of precipitation and latent heating associated with more than 1000 Northern Hemisphere winter extratropical cyclones using data observed by the Ku-band radar on board the Global Precipitation Measurement (GPM) Core Observatory. The horizontal precipitation composite at the developing stage of the cyclones shows two areas with large precipitation amounts. One is characterized by a large amount of weak stratiform precipitation, and a higher vertical heating gradient, collocating with warm fronts. The other is characterized by intense convective precipitation in association with the warm sector and cold fronts. The quantitative information on precipitation and latent heating obtained from the observation of many cyclones is valuable for the validation of numerical simulation results.

A Preliminary Analysis of Typical Structures and Microphysical Characteristics of Precipitation in Northeastern China Cold Vortexes

The northeastern China cold vortex (NCCV) is the main weather system affecting Northeast China. Based on the precipitation products from the dual-frequency precipitation radar (DPR) onboard the Global Precipitation Measurement core observatory (GPM) satellite, the precipitation structures and microphysical properties for different rain types in 6432 NCCVs from 2014 to 2019 were studied using dynamic composite analysis. Our results show that the precipitation in NCCVs is dominated by stratiform precipitation. Regions with high stratiform and convective precipitation frequency have a comma shape. The growth mechanism of precipitation particles changes at ~4 km in altitude, the lower particles grow through collision (more pronounced in convective precipitation), and the upper hydrometeors grow through the Bergeron process. Additionally, the precipitation structures and microphysical properties exhibit great regional variations in NCCVs. The rainfall for all rain types is the strongest in the southeast region within an NCCV, mainly characterized by higher near-surface droplet concentration, while precipitation events occur more frequently in the southeast region for all rain types. There are active rimming growth processes above the melting layer for convective precipitation in the western region of an NCCV. In the southeast region of an NCCV, the collision growth of droplets in both types of precipitation is the most obvious.

Ensemble‐Based Data Assimilation of GPM DPR Reflectivity: Cloud Microphysics Parameter Estimation With the Nonhydrostatic Icosahedral Atmospheric Model (NICAM)

AbstractDirect assimilation of Dual‐frequency Precipitation Radar (DPR) data of the Global Precipitation Measurement (GPM) core satellite is challenging mainly due to its long revisiting intervals relative to the time scale of precipitation, and precipitation location errors. This study explores a method for improving precipitation forecasts using GPM DPR through model parameter estimation. We developed a 28 km mesh global atmospheric data assimilation system that integrates the Nonhydrostatic ICosahedral Atmospheric Model (NICAM) and Local Ensemble Transform Kalman Filter (LETKF) coupled with a satellite radar simulator. Using the NICAM‐LETKF and GPM DPR observations, this study estimates a model cloud physics parameter corresponding to snowfall terminal velocity. To overcome the difficulties of long revisiting intervals and precipitation location errors, we propose a parameter estimation method based on a two‐dimensional histogram known as the contoured frequency by temperature diagram (CFTD). Parameter estimation effectively mitigated the gap between simulated and observed CFTD, resulting in improved 6 hr precipitation forecasts.

How Accurately Can Warm Rain Realistically Be Retrieved with Satellite Sensors? Part II: Horizontal and Vertical Heterogeneities

Abstract There are many sources of uncertainty in satellite precipitation retrievals of warm rain. In this paper, the second of a two-part study, we focus on uncertainties related to spatial heterogeneity and surface clutter. A cloud-resolving model simulation of warm, shallow clouds is used to simulate satellite observations from three theoretical satellite architectures—one similar to the Global Precipitation Measurement Core Observatory, one similar to CloudSat, and one similar to the planned Atmosphere Observing System (AOS). Rain rates are then retrieved using a common optimal estimation framework. For this case, retrieval biases due to nonuniform beamfilling are very large, with retrieved rain rates negatively (low) biased by as much as 40%–50% (depending on satellite architecture) at 5 km horizontal resolution. Surface clutter also acts to negatively bias retrieved rain rates. Combining all sources of uncertainty, the theoretical AOS satellite is found to outperform CloudSat in terms of retrieved surface rain rate, with a bias of −19% as compared with −28%, a reduced spread of retrieval errors, and an additional 17.5% of cases falling within desired uncertainty limits. The results speak to the need for additional high-resolution modeling simulations of warm rain so as to better characterize the uncertainties in satellite precipitation retrievals.

FY-3G Satellite Instruments and Precipitation Products: First Report of China’s Fengyun Rainfall Mission In-Orbit

Precipitation is one of the most important parameters in Earth system but is hard to measure. China began to develop satellites dedicated to precipitation measurements in the second generation of the FengYun polar-orbiting meteorological satellite program (FY-3). The first of total 2 rainfall missions scheduled, FY-3G, was successfully launched on 16 April 2023 and became the world’s third satellite to measure precipitation with space-borne radar after the tropical rainfall measuring mission in 1997 and global precipitation measurement core observatory in 2014. In this manuscript, we illustrate the platform of FY-3G and instruments mounted in great detail, with additional information about ground segments, designed sensor-based products, and retrieval of geophysical parameters. During the 4 months after launch, the specifications of the platform and instruments are under inspection as calibration and validation are carefully conducted. The first images captured by FY-3G are encouraging, and initial results show a strong capability for providing insights into all kinds of precipitation phenomena. The important work of data processing, such as data assimilation, data fusion between space-based and ground-based radar, and that between polar and geostationary satellites, as well as future applications in weather modification, has been prepared in advance. As a pioneer of China’s rainfall missions, FY-3G greatly improves our ability to provide global precipitation measurements, understand Earth’s water and energy cycle, and forecast extreme events for the benefit of society.

An improved near-real-time precipitation retrieval for Brazil

Abstract. Observations from geostationary satellites can provide spatially continuous coverage at continental scales with high spatial and temporal resolution. Because of this, they are commonly used to complement ground-based precipitation measurements, whose coverage is often more limited. We present Hydronn, a neural-network-based, near-real-time precipitation retrieval for Brazil based on visible and infrared (Vis–IR) observations from the Advanced Baseline Imager (ABI) on the Geostationary Operational Environmental Satellite 16 (GOES-16). The retrieval, which employs a convolutional neural network to perform Bayesian precipitation retrievals, was developed with the aims of (1) leveraging the full potential of latest-generation geostationary observations and (2) providing probabilistic precipitation estimates with well-calibrated uncertainties. The retrieval is trained using more than 3 years of collocations with combined radar and radiometer retrievals from the Global Precipitation Measurement (GPM) core observatory over South America. The accuracy of instantaneous precipitation estimates is assessed using a separate year of GPM combined retrievals and compared to retrievals from passive microwave (PMW) sensors and HYDRO, the Vis–IR retrieval that is currently in operational use at the Brazilian Institute for Space Research. Using all available channels of the ABI, Hydronn achieves accuracy close to that of state-of-the-art PMW precipitation retrievals in both precipitation estimation and detection despite the lower information content of the Vis–IR observations. Hourly, daily, and monthly precipitation accumulations are evaluated against gauge measurements for June and December 2020 and compared to HYDRO, the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN) Cloud Classification System (CCS), and the Integrated Multi-satellitE Retrievals for GPM (IMERG). Compared to HYDRO, Hydronn reduces the mean absolute error for hourly accumulations by 21 % (22 %) compared to HYDRO by 44 % (41 %) for the mean squared error (MSE) and increases the correlation by 138 % (312 %) for June (December) 2020. Compared to IMERG, the improvements correspond to 16 % (14 %), 12 % (12 %), and 20 % (56 %), respectively. Furthermore, we show that the probabilistic retrieval is well calibrated against gauge measurements when differences in the distributions of the training data and the gauge measurements are accounted for. Hydronn has the potential to significantly improve near-real-time precipitation retrievals over Brazil. Furthermore, our results show that precipitation retrievals based on convolutional neural networks (CNNs) that leverage the full range of available observations from latest-generation geostationary satellites can provide instantaneous precipitation estimates with accuracy close to that of state-of-the-art PMW retrievals. The high temporal resolution of the geostationary observation allows Hydronn to provide more accurate precipitation accumulations than any of the tested conventional precipitation retrievals. Hydronn thus clearly shows the potential of deep-learning-based precipitation retrievals to improve precipitation estimates from currently available satellite imagery.

A Comprehensive Machine Learning Study to Classify Precipitation Type over Land from Global Precipitation Measurement Microwave Imager (GPM-GMI) Measurements

Precipitation type is a key parameter used for better retrieval of precipitation characteristics as well as to understand the cloud–convection–precipitation coupling processes. Ice crystals and water droplets inherently exhibit different characteristics in different precipitation regimes (e.g., convection, stratiform), which reflect on satellite remote sensing measurements that help us distinguish them. The Global Precipitation Measurement (GPM) Core Observatory’s microwave imager (GMI) and dual-frequency precipitation radar (DPR) together provide ample information on global precipitation characteristics. As an active sensor, the DPR provides an accurate precipitation type assignment, while passive sensors such as the GMI are traditionally only used for empirical understanding of precipitation regimes. Using collocated precipitation type flags from the DPR as the “truth”, this paper employs machine learning (ML) models to train and test the predictability and accuracy of using passive GMI-only observations together with ancillary information from a reanalysis and GMI surface emissivity retrieval products. Out of six ML models, four simple ones (support vector machine, neural network, random forest, and gradient boosting) and the 1-D convolutional neural network (CNN) model are identified to produce 90–94% prediction accuracy globally for five types of precipitation (convective, stratiform, mixture, no precipitation, and other precipitation), which is much more robust than previous similar effort. One novelty of this work is to introduce data augmentation (subsampling and bootstrapping) to handle extremely unbalanced samples in each category. A careful evaluation of the impact matrices demonstrates that the polarization difference (PD), brightness temperature (Tc) and surface emissivity at high-frequency channels dominate the decision process, which is consistent with the physical understanding of polarized microwave radiative transfer over different surface types, as well as in snow and liquid clouds with different microphysical properties. Furthermore, the view-angle dependency artifact that the DPR’s precipitation flag bears with does not propagate into the conical-viewing GMI retrievals. This work provides a new and promising way for future physics-based ML retrieval algorithm development.

Ianos—A Hurricane in the Mediterranean

Abstract During 15–21 September 2020, an intense medicane, named Ianos, formed over the warm Mediterranean Sea. Following a path of approximately 1,900 km, Medicane Ianos affected Greece resulting in four casualties and devastating damage in the western and central parts of Greece. Persistent gale force 1-min winds up to 44 m s−1 and wind gusts up to 54 m s−1 were recorded in Cephalonia Island (Ionian Sea), while record-breaking amounts of accumulated rainfall have been recorded in several Ionian islands, as well as in parts of central Greece. Analysis of the available observations showed that Ianos was the most intense medicane ever recorded in the Mediterranean. This paper aims at investigating the genesis and evolution of the medicane, based on in situ observations, satellite measurements, and model analyses. Toward that objective, Meteosat Second Generation (MSG) SEVIRI imagery, combined with lightning data permitted to follow the evolution of convective activity during the various phases of Ianos. This investigation is complemented with upper-air model analyses in order to evaluate the synoptic environment within which Ianos had formed and was sustained over 7 days. Finally, the Global Precipitation Measurement Core Observatory (GPM CO) satellite overpasses over Medicane Ianos provided invaluable information about its 3D structure, especially during its most intense phase.

GPM-CO observations of Medicane Ianos: Comparative analysis of precipitation structure between development and mature phase

The present work exploits the satellite measurements from the NASA/JAXA Global Precipitation Measurement Core Observatory (GPM-CO) active and passive microwave sensors to analyze the precipitation structure of the most intense Mediterranean Hurricane (Medicane) on record, named Ianos, which swept across the Ionian Sea between 14 and 18 September 2020. Two GPM-CO overpasses, available during Ianos development and tropical-like cyclone (mature) phase, are analyzed in detail. GPM Microwave Imager measurements are used to carry out a comparative analysis of the medicane precipitation structure and microphysics processes between the two phases. The GPM-CO Dual-frequency Precipitation Radar overpass, available for the first time during a medicane mature phase, provides key measurements and products to analyze the 3D precipitation structure in the rainbands, offering further evidence of the main precipitation microphysics processes inferred from the passive microwave measurement analysis. Substantial difference in the rainband precipitation structure is observed, with deeper convection and stronger updraft features during development than at the mature phase, when also shallow precipitation/warm rain processes are observed in the inner region around the medicane eye. These features play a key role to explain the substantial drop in lightning activity during Ianos mature phase. Graupel-ice electrification process is inhibited due to the combined effect of strong horizontal wind and the observed limited growth of graupel. The study demonstrates the value of the GPM-CO not only to characterize Medicane Ianos precipitation structure and microphysics processes with unprecedented detail, but also to provide evidence of its exceptional intensity, tropical-like characteristics during its mature phase, and its similarities with tropical cyclones.

GPM DPR Retrievals: Algorithm, Evaluation, and Validation

The primary goal of the dual-frequency precipitation radar (DPR) aboard the Global Precipitation Measurement (GPM) Core Observatory satellite is to infer precipitation rate and raindrop/particle size distributions (DSD/PSD). The focus of this paper is threefold: (1) to describe the DPR retrieval algorithm that uses an adjustable relationship between rain rate (R) and the mass-weighted diameter (Dm) or an R-Dm relationship in solving for R and Dm simultaneously; (2) to evaluate the DPR algorithm based on the physical simulations that employ measured DSD/PSD to understand the mechanism and error characteristics of the retrieval method; (3) to review ground validation studies for DPR products as well as to analyze the strengths and weaknesses of ground radar and rain gauge/disdrometer validations. Overall, the DPR Version 6 algorithm provides reasonably accurate estimates of R and Dm in rain. Non-uniformity in the rain profile, however, tends to degrade the accuracy of the R and Dm estimates to some extent as the range-independent assumption of the adjustable parameter (ε) of the R-Dm relation is not able to fully account for natural variation of DSD in the vertical profile. The DPR snow rate is underestimated as compared with the independent dual-frequency ratio (DFR) technique. This is possibly the result of the constraint associated with the path integral attenuation (PIA)/differential PIA (δPIA) used in the DPR algorithm to find the best ε and range-independent ε assumption. A range-variable ε model, proposed in the DPR Version 7 algorithm, is expected to improve rain and snow retrieval.

Constrained Inversion of a Microwave Snowpack Emission Model Using Dictionary Matching: Applications for GPM Satellite

This article presents a new algorithmic framework for multilayer inversion of the dense media radiative transfer (DMRT) equations of snowpack emission, with particular emphasis on the role of high-frequency microwave channels above 60 GHz. The approach relies on dictionary matching and locally constrained least squares. The results demonstrate that the algorithm can invert the DMRT model and retrieve depth, density, and grain size of a single-layer snowpack when dependencies of density and grain size on depth are properly accounted for. However, as the number of layers increases, the sensitivity of the inversion to observation noise grows markedly. Using observations, over the Great Plains in the United States, from the microwave imager onboard the global precipitation measurement (GPM, 10-166 GHz) core satellite, the initial results demonstrate that under a clear-sky condition and no vegetation canopy, the algorithm is capable to retrieve the snow depth and water equivalent of seasonal snow with a mean absolute error (MAE) of less than 0.15 m--when compared to the high-resolution analysis data from the SNOw Data Assimilation System (SNODAS).

Vulnerability of Passive Microwave Snowfall Retrievals to Physical Properties of Snowpack: A Perspective From Dense Media Radiative Transfer Theory

The uncertainty of passive microwave retrievals of snowfall is notoriously high where the high-frequency surface emissivity is significantly reduced and varies markedly in response to changes of snowpack physical properties. Using the dense media radiative transfer theory, this article studies the potential effects of terrestrial snow-cover depth, density, and grain size on high-frequency channels 89 and 166 GHz of the radiometer onboard the Global Precipitation Measurement (GPM) core satellite, which are commonly used to capture the snowfall scattering signals. Integrating the inference across all feasible grain sizes, ranges of snowpack density and depth are identified over which the snowfall scattering signatures can be time varying and potentially obscured. Using 10 years of reanalysis data, the seasonal vulnerability of snowfall retrievals to changes of snowpack emissivity in the Northern Hemisphere is mapped in a probabilistic sense and connections are made with uncertainties of the GPM passive microwave snowfall retrievals. It is found that among different snow classes, relatively light Arctic tundra snow in fall, with a density below 260 kg m^-3, and shallow prairie snow during the winter, with a depth of less than 40 cm, can reduce the surface emissivity and obscure the snowfall passive microwave signatures. It is demonstrated that, during the winter, the highly vulnerable areas are over Kazakhstan, and Mongolia with taiga and prairie snow. In the fall, these areas are largely over tundra and taiga snow in north of Russia and the Arctic Archipelagos as well as prairies in Canada and the Great Plains in the United States.

Improvement of the Cloud Microphysics Scheme of the Mesoscale Model at the Japan Meteorological Agency Using Spaceborne Radar and Microwave Imager of the Global Precipitation Measurement as Reference

Abstract In this study, the single-moment 6-class bulk cloud microphysics scheme used in the operational numerical weather prediction system at the Japan Meteorological Agency was improved using the observations of the Global Precipitation Measurement (GPM) core satellite as reference values. The original cloud microphysics scheme has the following biases: underestimation of cloud ice compared to the brightness temperature of the GPM Microwave Imager (GMI) and underestimation of the lower-troposphere rain compared to the reflectivity of GPM Dual-frequency Precipitation Radar (DPR). Furthermore, validation of the dual-frequency rate of reflectivity revealed that the dominant particles in the solid phase of simulation were graupel and deviated from DPR observation. The causes of these issues were investigated using a single-column kinematic model. The underestimation of cloud ice was caused by a high ice-to-snow conversion rate, and the underestimation of precipitation in the lower layers was caused by an excessive number of small-diameter rain particles. The parameterization of microphysics scheme is improved to eliminate the biases in the single-column model. In the forecast obtained using the improved scheme, the underestimation of cloud ice and rain is reduced. Consequently, the prediction errors of hydrometeors were reduced against the GPM satellite observations, and the atmospheric profiles and precipitation forecasts were improved.

A Comprehensive Evaluation of Near-Real-Time and Research Products of IMERG Precipitation over India for the Southwest Monsoon Period

Precipitation is one of the integral components of the global hydrological cycle. Accurate estimation of precipitation is vital for numerous applications ranging from hydrology to climatology. Following the launch of the Global Precipitation Measurement (GPM) Core Observatory, the Integrated Multi-satellite Retrievals for GPM (IMERG) precipitation product was released. The IMERG provides global precipitation estimates at finer spatiotemporal resolution (e.g., 0.1°/half-hourly) and has shown to be better than other contemporary multi-satellite precipitation products over most parts of the globe. In this study, near-real-time and research products of IMERG have been extensively evaluated against a daily rain-gauge-based precipitation dataset over India for the southwest monsoon period. In addition, the current version 6 of the IMERG research product or Final Run (IMERG-F V6) has been compared with its predecessor, version 5, and error characteristics of IMERG-F V6 for pre-GPM and GPM periods have been assessed. The spatial distributions of different error metrics over the country show that both near-real-time IMERG products (e.g., Early and Late Runs) have similar error characteristics in precipitation estimation. However, near-real-time products have larger errors than IMERG-F V6, as expected. Bias in all-India daily mean rainfall in the near-real-time IMERG products is about 3–4 times larger than research product. Both V5 and V6 IMERG-F estimates show similar error characteristics in daily precipitation estimation over the country. Similarly, both near-real-time and research products show similar characteristics in the detection of rainy days. However, IMERG-F V6 exhibits better performance in precipitation estimation and detection of rainy days during the GPM period (2014–2017) than the pre-GPM period (2010–2013). The contribution of different rainfall intensity intervals to total monsoon rainfall is captured well by the IMERG estimates. Furthermore, results reveal that IMERG estimates under-detect and overestimate light rainfall intensity of 2.5–7.5 mm day−1, which needs to be improved in the next release. The results of this study would be beneficial for end-users to integrate this multi-satellite product in any specific application.