Gln Side Chain Research Articles

Conserved loop residues−Tyr270 and Asn372 near the catalytic site of the lysostaphin endopeptidase are essential for staphylolytic activity toward pentaglycine binding and catalysis

Lysostaphin endopeptidase cleaves pentaglycine cross-bridges found in staphylococcal cell-wall peptidoglycans and proves very effective in combatting methicillin-resistant Staphylococcus aureus. Here, we revealed the functional importance of two loop residues, Tyr270 in loop 1 and Asn372 in loop 4, which are highly conserved among the M23 endopeptidase family and are found close to the Zn2+-coordinating active site. Detailed analyses of the binding groove architecture together with protein-ligand docking showed that these two loop residues potentially interact with the docked ligand–pentaglycine. Ala-substituted mutants (Y270A and N372A) were generated and over-expressed in Escherichia coli as a soluble form at levels comparable to the wild type. A drastic decrease in staphylolytic activity against S. aureus was observed for both mutants, suggesting an essential role of the two loop residues in lysostaphin function. Further substitutions with an uncharged polar Gln side-chain revealed that only the Y270Q mutation caused a dramatic reduction in bioactivity. In silico predicting the effect of binding site mutations revealed that all mutations displayed a large ΔΔGbind value, signifying requirements of the two loop residues for efficient binding to pentaglycine. Additionally, MD simulations revealed that Y270A and Y270Q mutations induced large flexibility of the loop 1 region, showing markedly increased RMSF values. Further structural analysis suggested that Tyr270 conceivably participated in the oxyanion stabilization of the enzyme catalysis. Altogether, our present study disclosed that two highly conserved loop residues, loop 1-Tyr270 and loop 4-Asn372, located near the lysostaphin active site are crucially involved in staphylolytic activity toward binding and catalysis of pentaglycine cross-links.

Hindered Rotations of Protein Asparagine/Glutamine Side-Chain NH2 Groups: Impact of Hydrogen Bonding with DNA

Hindered rotation about an sp2 C-N bond is known to occur in arginine (Arg), asparagine (Asn), and glutamine (Gln) side chains of proteins. However, very little is known about the rotational dynamics of Asn and Gln side-chain NH2 groups. Here, using a unique NMR method, we quantitatively characterized the hindered rotations of protein Asn/Gln side-chain NH2 groups. This NMR method yields simple NH2-selective spectra that allow for an accurate determination of the kinetic rate constants for the hindered rotations. Through the NMR measurements at different temperatures, we investigated the energy barriers that restrict the C-N bond rotations of protein side-chain NH2 groups. Through a comparison of the kinetic data for the free and DNA-bound states of the Antp homeodomain, we also examined the impact of hydrogen bonding on the hindered rotations of the side-chain NH2 groups. Our data suggest that the hydrogen bonding increases the energy barriers by 1-6 kJ/mol.

De Novo Design, Solution Characterization, and Crystallographic Structure of an Abiological Mn-Porphyrin-Binding Protein Capable of Stabilizing a Mn(V) Species.

De novo protein design offers the opportunity to test our understanding of how metalloproteins perform difficult transformations. Attaining high-resolution structural information is critical to understanding how such designs function. There have been many successes in the design of porphyrin-binding proteins; however, crystallographic characterization has been elusive, limiting what can be learned from such studies as well as the extension to new functions. Moreover, formation of highly oxidizing high-valent intermediates poses design challenges that have not been previously implemented: (1) purposeful design of substrate/oxidant access to the binding site and (2) limiting deleterious oxidation of the protein scaffold. Here we report the first crystallographically characterized porphyrin-binding protein that was programmed to not only bind a synthetic Mn-porphyrin but also maintain binding site access to form high-valent oxidation states. We explicitly designed a binding site with accessibility to dioxygen units in the open coordination site of the Mn center. In solution, the protein is capable of accessing a high-valent Mn(V)-oxo species which can transfer an O atom to a thioether substrate. The crystallographic structure is within 0.6 Å of the design and indeed contained an aquo ligand with a second water molecule stabilized by hydrogen bonding to a Gln side chain in the active site, offering a structural explanation for the observed reactivity.

Structural transitions in Orb2 prion-like domain relevant for functional aggregation in memory consolidation

The recent structural elucidation of ex vivo Drosophila Orb2 fibrils revealed a novel amyloid formed by interdigitated Gln and His residue side chains belonging to the prion-like domain. However, atomic-level details on the conformational transitions associated with memory consolidation remain unknown. Here, we have characterized the nascent conformation and dynamics of the prion-like domain (PLD) of Orb2A using a nonconventional liquid-state NMR spectroscopy strategy based on 13C detection to afford an essentially complete set of 13Cα, 13Cβ, 1Hα, and backbone 13CO and 15N assignments. At pH 4, where His residues are protonated, the PLD is disordered and flexible, except for a partially populated α-helix spanning residues 55–60, and binds RNA oligos, but not divalent cations. At pH 7, in contrast, His residues are predominantly neutral, and the Q/H segments adopt minor populations of helical structure, show decreased mobility and start to self-associate. At pH 7, the His residues do not bind RNA or Ca2+, but do bind Zn2+, which promotes further association. These findings represent a remarkable case of structural plasticity, based on which an updated model for Orb2A functional amyloidogenesis is suggested.

Molecular structure and interactions within amyloid-like fibrils formed by a low-complexity protein sequence from FUS

Protein domains without the usual distribution of amino acids, called low complexity (LC) domains, can be prone to self-assembly into amyloid-like fibrils. Self-assembly of LC domains that are nearly devoid of hydrophobic residues, such as the 214-residue LC domain of the RNA-binding protein FUS, is particularly intriguing from the biophysical perspective and is biomedically relevant due to its occurrence within neurons in amyotrophic lateral sclerosis, frontotemporal dementia, and other neurodegenerative diseases. We report a high-resolution molecular structural model for fibrils formed by the C-terminal half of the FUS LC domain (FUS-LC-C, residues 111-214), based on a density map with 2.62 Å resolution from cryo-electron microscopy (cryo-EM). In the FUS-LC-C fibril core, residues 112-150 adopt U-shaped conformations and form two subunits with in-register, parallel cross-β structures, arranged with quasi-21 symmetry. All-atom molecular dynamics simulations indicate that the FUS-LC-C fibril core is stabilized by a plethora of hydrogen bonds involving sidechains of Gln, Asn, Ser, and Tyr residues, both along and transverse to the fibril growth direction, including diverse sidechain-to-backbone, sidechain-to-sidechain, and sidechain-to-water interactions. Nuclear magnetic resonance measurements additionally show that portions of disordered residues 151-214 remain highly dynamic in FUS-LC-C fibrils and that fibrils formed by the N-terminal half of the FUS LC domain (FUS-LC-N, residues 2-108) have the same core structure as fibrils formed by the full-length LC domain. These results contribute to our understanding of the molecular structural basis for amyloid formation by FUS and by LC domains in general.

Rational design of cell-permeable cyclic peptides containing a d-Pro-l-Pro motif

Cyclic peptides are capable of binding to challenging targets (e.g., proteins involved in protein-protein interactions) with high affinity and specificity, but generally cannot gain access to intracellular targets because of poor membrane permeability. In this work, we discovered a conformationally constrained cyclic cell-penetrating peptide (CPP) containing a d-Pro-l-Pro motif, cyclo(AFΦrpPRRFQ) (where Φ is l-naphthylalanine, r is d-arginine, and p is d-proline). The structural constraints provided by cyclization and the d-Pro-l-Pro motif permitted the rational design of cell-permeable cyclic peptides of large ring sizes (up to 16 amino acids). This strategy was applied to design a potent, cell-permeable, and biologically active cyclic peptidyl inhibitor, cyclo(YpVNFΦrpPRR) (where Yp is l-phosphotyrosine), against the Grb2 SH2 domain. Multidimensional NMR spectroscopic and circular dichroism analyses revealed that the cyclic CPP as well as the Grb2 SH2 inhibitor assume a predominantly random coil structure but have significant β-hairpin character surrounding the d-Pro-l-Pro motif. These results demonstrate cyclo(AFΦrpPRRFQ) as an effective CPP for endocyclic (insertion of cargo into the CPP ring) or exocyclic delivery of biological cargos (attachment of cargo to the Gln side chain).

Dedicated to a peptide chemist of few words and immense impact: Louis A. Carpino

Dedicated to a peptide chemist of few words and immense impact: Louis A. Carpino

Conformation-Specific Spectroscopy of Asparagine-Containing Peptides: Influence of Single and Adjacent Asn Residues on Inherent Conformational Preferences.

The infrared and ultraviolet spectra of a series of capped asparagine-containing peptides, Ac-Asn-NHBn, Ac-Ala-Asn-NHBn, and Ac-Asn-Asn-NHBn, have been recorded under jet-cooled conditions in the gas phase in order to probe the influence of the Asn residue, with its -CH2-C(═O)-NH2 side chain, on the local conformational preferences of a peptide backbone. The double-resonance methods of resonant ion-dip infrared (RIDIR) spectroscopy and infrared-ultraviolet hole-burning (IR-UV HB) spectroscopy were used to record single-conformation spectra in the infrared and ultraviolet, respectively, free from interference from other conformations present in the molecular beam. Ac-Asn-NHBn spreads its population over two conformations, both of which are stabilized by a pair of H-bonds that form a bridge between the Asn carboxamide group and the NH and C═O groups on the peptide backbone. In one the peptide backbone engages in a 7-membered H-bonded ring (labeled C7eq), thereby forming an inverse γ-turn, stabilized by a C6/C7 Asn bridge. In the other the Asn carboxamide group forms a C8/C7 H-bonded bridge with the carboxamide group facing in the opposite direction across an extended peptide backbone involving a C5 interaction. Both Ac-Ala-Asn-NHBn and Ac-Asn-Asn-NHBn are found exclusively in a single conformation in which the peptide backbone engages in a type I β-turn with its C10 H-bond. The Asn residue(s) stabilize this β-turn via C6 H-bond(s) between the carboxamide C═O group and the same residue's amide NH. These structures are closely analogous to the corresponding structures in Gln-containing peptides studied previously [Walsh, P. S. et al. PCCP 2016, 18, 11306-11322; Walsh, P. S. et al. Angew. Chem. Int. Ed. 2016, 55, 14618-14622], indicating that the Asn and Gln side chains can each configure so as to stabilize the same backbone conformations. Spectroscopic and computational evidence suggest that glutamine is more predisposed than asparagine to β-turn formation via unusually strong side-chain-backbone hydrogen-bond formation. Further spectral and structural similarities and differences due to the side-chain length difference of these similar amino acids are presented and discussed.

Hydrogen Bonding Environments in the Photocycle Process around the Flavin Chromophore of the AppA-BLUF domain

Three kinds of photochemical reactions are known in flavins as chromophores of photosensor proteins, reflecting the various catalytic reactions of the flavin in flavoenzymes. Sensor of blue light using the flavin FAD (BLUF) domains exhibit a unique photoreaction compared with other flavin-binding photoreceptors in that the chromophore does not change its chemical structure between unphotolyzed and intermediate states. Rather, the hydrogen bonding environment is altered, whereby the conserved Gln and Tyr residues near FAD play a crucial role. One proposal for this behavior is that the conserved Gln changes its chemical structure from a keto to an enol. We applied light-induced difference Fourier transform infrared (FTIR) spectroscopy to AppA-BLUF. The spectra of AppA-BLUF exhibited a different feature upon 15N-Gln labeling compared with the previously reported spectra from BlrB, a different BLUF domain. The FTIR signals were interpreted from quantum mechanics/molecular mechanics (QM/MM) calculation as the keto-enol tautomerization and rotation of the Gln63 side chain in the AppA-BLUF domain. The former was consistent with the result from BlrB, but the latter was not uniquely determined by the previous study. QM/MM calculation also indicated that the infrared signal shape is influenced depending on whether a Trp side chain forms a hydrogen bond with the Gln side chain. FTIR spectra and QM/MM simulations concluded that Trp104 does not flip out but is maintained in the intermediate state. In contrast, our data revealed that the Trp residue at the corresponding position in BlrB faces outward in both states.

Inherent Conformational Preferences of Ac‐Gln‐Gln‐NHBn: Sidechain Hydrogen Bonding Supports a β‐Turn in the Gas Phase

AbstractGas‐phase single‐conformation spectroscopy is used to study Ac‐Gln‐Gln‐NHBn in order to probe the interplay between sidechain hydrogen bonding and backbone conformational preferences. This small, amide‐rich peptide offers many possibilities for backbone–backbone, sidechain–backbone, and sidechain–sidechain interactions. The major conformer observed experimentally features a type‐I β‐turn with a canonical 10‐membered ring C=O—H−N hydrogen bond between backbone amide groups. In addition, the C=O group of each Gln sidechain participates in a seven‐membered ring hydrogen bond with the backbone NH of the same residue. Thus, sidechain hydrogen‐bonding potential is satisfied in a manner that is consistent with and stabilizes the β‐turn secondary structure. This turn‐forming propensity may be relevant to pathogenic amyloid formation by polyglutamine segments in human proteins.

Inherent Conformational Preferences of Ac-Gln-Gln-NHBn: Sidechain Hydrogen Bonding Supports a β-Turn in the Gas Phase.

Gas-phase single-conformation spectroscopy is used to study Ac-Gln-Gln-NHBn in order to probe the interplay between sidechain hydrogen bonding and backbone conformational preferences. This small, amide-rich peptide offers many possibilities for backbone-backbone, sidechain-backbone, and sidechain-sidechain interactions. The major conformer observed experimentally features a type-I β-turn with a canonical 10-membered ring C=O-H-N hydrogen bond between backbone amide groups. In addition, the C=O group of each Gln sidechain participates in a seven-membered ring hydrogen bond with the backbone NH of the same residue. Thus, sidechain hydrogen-bonding potential is satisfied in a manner that is consistent with and stabilizes the β-turn secondary structure. This turn-forming propensity may be relevant to pathogenic amyloid formation by polyglutamine segments in human proteins.

Mass spectrometry profiling of non-enzymatic deamidation of articular cartilage components suggests slower protein turnover in deep regions and in hips compared with knees

Mass spectrometry profiling of non-enzymatic deamidation of articular cartilage components suggests slower protein turnover in deep regions and in hips compared with knees

Polyglutamine Fibrils: New Insights into Antiparallel β-Sheet Conformational Preference and Side Chain Structure.

Understanding the structure of polyglutamine (polyQ) amyloid-like fibril aggregates is crucial to gaining insights into the etiology of at least ten neurodegenerative disorders, including Huntington's disease. Here, we determine the structure of D2Q10K2 (Q10) fibrils using ultraviolet resonance Raman (UVRR) spectroscopy and molecular dynamics (MD). Using UVRR, we determine the fibril peptide backbone Ψ and glutamine (Gln) side chain χ3 dihedral angles. We find that most of the fibril peptide bonds adopt antiparallel β-sheet conformations; however, a small population of peptide bonds exist in parallel β-sheet structures. Using MD, we simulate three different potential fibril structural models that consist of either β-strands or β-hairpins. Comparing the experimentally measured Ψ and χ3 angle distributions to those obtained from the MD simulated models, we conclude that the basic structural motif of Q10 fibrils is an extended β-strand structure. Importantly, we determine from our MD simulations that Q10 fibril antiparallel β-sheets are thermodynamically more stable than parallel β-sheets. This accounts for why polyQ fibrils preferentially adopt antiparallel β-sheet conformations instead of in-register parallel β-sheets like most amyloidogenic peptides. In addition, we directly determine, for the first time, the structures of Gln side chains. Our structural data give new insights into the role that the Gln side chains play in the stabilization of polyQ fibrils. Finally, our work demonstrates the synergistic power and utility of combining UVRR measurements and MD modeling to determine the structure of amyloid-like fibrils.

Force Spectroscopy of a Bacterial Adhesin with an Internal Thioester Bond

Thioester bonds are ubiquitous in biology, often serving as reactive intermediates, for example in proteolysis and fatty acid synthesis. In addition, stable thioester bonds between Cys and Gln side chains are found internally within immune complement proteins and anti-proteases, which utilize these bonds as potent substrates for covalent attachment to ligand. In these instances, exposure of the bond is said to be ‘cryptic’, requiring a proteolytic cleavage to unmask the buried thioester. Recently, thioester bonds have been discovered in adhesin domains of Gram-positive bacteria. These adhesins mediate the covalent attachment of bacteria to hosts, microbial biofilms, and surfaces, and consequently must sustain high levels of mechanical stress. Here we report the first mechanical characterization of a thioester-containing protein from studying the Streptococcus pyogenes Spy0125 adhesin. We constructed a fusion protein of the three C-terminal domains of Spy0125 with an N-terminal HaloTag for bioorthogonal covalent anchoring, and further introduced two isopeptide knockout mutations into Spy0125 to provide an unambiguous fingerprint from mechanical polyprotein unfolding. Using AFM-based single-molecule force spectroscopy, we observe unfolding extensions of 15 nm within the adhesin's thioester domain (TED), consistent with a single thioester bond delimiting extension. This thioester domain is inserted within a separate “host” domain in the crystal structure. Uniquely, unfolding follows a reverse mechanical hierarchy as the more mechanically stable host domain unfolds first, at a force of 288 ± 25 pN, followed by the weaker TED, at a force of 121 ± 14 pN, thereby protecting the TED and thioester bond. Both domains are observed to refold on timescales of under 1 second. We propose that reactivity of the thioester bond may be mechanically ‘cryptic’, sequestered within the TED and unmasked for covalent attachment only when the host domain is under force.

Conformation-specific spectroscopy of capped glutamine-containing peptides: role of a single glutamine residue on peptide backbone preferences.

The conformational preferences of a series of short, aromatic-capped, glutamine-containing peptides have been studied under jet-cooled conditions in the gas phase. This work seeks a bottom-up understanding of the role played by glutamine residues in directing peptide structures that lead to neurodegenerative diseases. Resonant ion-dip infrared (RIDIR) spectroscopy is used to record single-conformation infrared spectra in the NH stretch, amide I and amide II regions. Comparison of the experimental spectra with the predictions of calculations carried out at the DFT M05-2X/6-31+G(d) level of theory lead to firm assignments for the H-bonding architectures of a total of eight conformers of four molecules, including three in Z-Gln-OH, one in Z-Gln-NHMe, three in Ac-Gln-NHBn, and one in Ac-Ala-Gln-NHBn. The Gln side chain engages actively in forming H-bonds with nearest-neighbor amide groups, forming C8 H-bonds to the C-terminal side, C9 H-bonds to the N-terminal side, and an amide-stacked geometry, all with an extended (C5) peptide backbone about the Gln residue. The Gln side chain also stabilizes an inverse γ-turn in the peptide backbone by forming a pair of H-bonds that bridge the γ-turn and stabilize it. Finally, the entire conformer population of Ac-Ala-Gln-NHBn is funneled into a single structure that incorporates the peptide backbone in a type I β-turn, stabilized by the Gln side chain forming a C7 H-bond to the central amide group in the β-turn not otherwise involved in a hydrogen bond. This β-turn backbone structure is nearly identical to that observed in a series of X-(AQ)-Y β-turns in the protein data bank, demonstrating that the gas-phase structure is robust to perturbations imposed by the crystalline protein environment.

Improved and scalable synthesis of building blocks for the modular synthesis of teraryl-based alpha-helix mimetics

The modular synthesis of teraryl-based alpha-helix mimetics can be accomplished by sequential Suzuki-couplings of arylboronic acid building blocks with 4-iodophenyltriflate core-fragments. We report about new synthetic accesses to core fragments featuring the side chains of Leu, Lys, Cys, Glu, Gln, Ser, and Thr starting from simple phenol precursors.

Peptide Bond Cleavage through Asparagine Cyclization

Protein splicing is the post translational modification by which an internal peptide, or intein, separates itself from the surrounding residues, or exteins. In the third step of the mechanism, asparagine cyclization, coupled to peptide bond cleavage, cleaves the intein from the exteins. We have studied this cyclization both experimentally and computationally. In the lab, we use a model peptide assay in which the cyclization of Asn is coupled to fluorescence. Cleavage via Asn cyclization is much faster than via Gln cyclization. High temperature, low dielectric constant, and high pH promote cyclization. We also have observed cleavage after Asp, but only at low pH. Computationally, we used molecular dynamics simulations, which suggest that the Asn side chain more frequently samples optimal attack conformations than a Gln side chain. Density functional theory and nudged elastic band simulations confirm the side chain nitrogen, not the oxygen, is the nucleophile and that nitrogen deprotonation is likely necessary for the attack to occur. The activation barriers of both the deprotonation and cyclization are being calculated to determine the rate limiting step for the mechanism. Simulations of peptides containing Asp suggest that cyclization occurs via a different mechanism than that of the native Asn and Gln residues. This material is based upon work supported by the National Science Foundation under grant MCB-1244089 and by the Camille and Henry Dreyfus Foundation.

Early endosomal escape of a cyclic cell-penetrating peptide allows effective cytosolic cargo delivery.

Cyclic heptapeptide cyclo(FΦRRRRQ) (cFΦR4, where Φ is l-2-naphthylalanine) was recently found to be efficiently internalized by mammalian cells. In this study, its mechanism of internalization was investigated by perturbing various endocytic events through the introduction of pharmacologic agents and genetic mutations. The results show that cFΦR4 binds directly to membrane phospholipids, is internalized into human cancer cells through endocytosis, and escapes from early endosomes into the cytoplasm. Its cargo capacity was examined with a wide variety of molecules, including small-molecule dyes, linear and cyclic peptides of various charged states, and proteins. Depending on the nature of the cargos, they may be delivered by endocyclic (insertion of cargo into the cFΦR4 ring), exocyclic (attachment of cargo to the Gln side chain), or bicyclic approaches (fusion of cFΦR4 and cyclic cargo rings). The overall delivery efficiency (i.e., delivery of cargo into the cytoplasm and nucleus) of cFΦR4 was 4–12-fold higher than those of nonaarginine, HIV Tat-derived peptide, or penetratin. The higher delivery efficiency, coupled with superior serum stability, minimal toxicity, and synthetic accessibility, renders cFΦR4 a useful transporter for intracellular cargo delivery and a suitable system for investigating the mechanism of endosomal escape.

Autocatalytically generated Thr-Gln ester bond cross-links stabilize the repetitive Ig-domain shaft of a bacterial cell surface adhesin

Gram-positive bacteria are decorated by a variety of proteins that are anchored to the cell wall and project from it to mediate colonization, attachment to host cells, and pathogenesis. These proteins, and protein assemblies, such as pili, are typically long and thin yet must withstand high levels of mechanical stress and proteolytic attack. The recent discovery of intramolecular isopeptide bond cross-links, formed autocatalytically, in the pili from Streptococcus pyogenes has highlighted the role that such cross-links can play in stabilizing such structures. We have investigated a putative cell-surface adhesin from Clostridium perfringens comprising an N-terminal adhesin domain followed by 11 repeat domains. The crystal structure of a two-domain fragment shows that each domain has an IgG-like fold and contains an unprecedented ester bond joining Thr and Gln side chains. MS confirms the presence of these bonds. We show that the bonds form through an autocatalytic intramolecular reaction catalyzed by an adjacent His residue in a serine protease-like mechanism. Two buried acidic residues assist in the reaction. By mutagenesis, we show that loss of the ester bond reduces the thermal stability drastically and increases susceptibility to proteolysis. As in pilin domains, the bonds are placed at a strategic position joining the first and last strands, even though the Ig fold type differs. Bioinformatic analysis suggests that similar domains and ester bond cross-links are widespread in Gram-positive bacterial adhesins.

Spectroscopic Identification of Cyclic Imide b2-Ions from Peptides Containing Gln and Asn Residues

In mass-spectrometry based peptide sequencing, formation of b- and y-type fragments by cleavage of the amide C-N bond constitutes the main dissociation pathway of protonated peptides under low-energy collision induced dissociation (CID). The structure of the b2 fragment ion from peptides containing glutamine (Gln) and asparagine (Asn) residues is investigated here by infrared ion spectroscopy using the free electron laser FELIX. The spectra are compared with theoretical spectra calculated using density functional theory for different possible isomeric structures as well as to experimental spectra of synthesized model systems. The spectra unambiguously show that the b2-ions do not possess the common oxazolone structure, nor do they possess the alternative diketopiperazine structure. Instead, cyclic imide structures are formed through nucleophilic attack by the amide nitrogen atom of the Gln and Asn side chains. The alternative pathway involving nucleophilic attack from the side-chain amide oxygen atom leading to cyclic isoimide structures, which had been suggested by several authors, can clearly be excluded based on the present IR spectra. This mechanism is perhaps surprising as the amide oxygen atom is considered to be the better nucleophile; however, computations show that the products formed via attack by the amide nitrogen are considerably lower in energy. Hence, b2-ions with Asn or Gln in the second position form structures with a five-membered succinimide or a six-membered glutarimide ring, respectively. b2-Ions formed from peptides with Asn in the first position are spectroscopically shown to possess the classical oxazolone structure.