Geometry Configuration Research Articles

Conformational Geometry Matters: The Case of the Low-Melting-Point Systems of Tetrabutylammonium Triflate with Fumaric or Maleic Acid.

For this article, the interaction of tetrabutylammonium trifluoromethanesulfonate (TBATFO) with either fumaric (FUM) or maleic (MAL) acid has been investigated. These acids are isomers and can be considered the trans and cis configurations of the same molecular geometry. When TBATFO is mixed with FUM, an eutectic point is obtained for a relative composition of 90-10 (molar ratio), with a melting point of ≈90 °C. If maleic acid is mixed with TBATFO, one obtains an inhomogeneous phase with the retention of a solid portion immersed in a liquid phase, even above 90 °C. DFT calculations helped to model the interaction between the components. It is suggested herein that TBATFO interacts more strongly with FUM than with MAL, due to possible interactions in two different sites for hydrogen bonding (HB) in FUM. In MAL, one of the HB sites is instead retained in the intramolecular interactions; therefore, fewer sites are available for intermolecular interactions. Infrared spectroscopy measurements have confirmed this scenario, in which the hydrogen bonds of the acid molecules are replaced by HB between the acid and the ionic couple: for both kinds of mixtures, the vibration region of the OH bonds is strongly affected by mixing. However, in the case of FUM, the vibrations of the SO3 group of the TFO anion are displaced, while they remain in practically the same frequency position in the case of MAL.

Thermal Fluid Modeling Approaches in SAM for High Temperature Gas-Cooled Reactor Applications

This paper provides an overview of the unique modeling and simulation challenges and needs in the system and safety analysis of two common types of High Temperature Gas-cooled Reactor (HTGR) designs. The challenges are associated with the complex core geometry configurations and the change of the dominant heat removal mechanisms between normal operating conditions and decay heat removal transients. This requires that simulation tools utilize models with reasonable length scales and capture both the localized heat transfer and the core-scale heat transfer at the same time. To meet such analysis needs, different methodologies were developed. This includes adopting existing methods and further developing/improving them, as well as proposing innovative methods that leverage advanced computational frameworks such as the Multiphysics Object Oriented Simulation Environment (MOOSE).

Numerical Investigation of Two-Phase Shock Waves in CO2 Flows Using a Modified Hertz–Knudsen Model

Abstract Understanding the complex behavior of two-phase shocks in CO2 flows is essential for a variety of applications, including carbon capture and storage () and transcritical refrigeration cycles. This study presents a comprehensive numerical investigation of two-phase shock waves using the multispecies user-defined real gas model in Ansys Fluent. The simulations are performed for de-Laval nozzles, exploring the two-phase shock features for three-dimensional (3D), two-dimensional (2D), and two-dimensional axisymmetric geometries. The nonequilibrium condensation, subsequent evaporation, and denucleation occurring across the shock are modeled through a set of user-defined scalar transport equations implemented within Ansys Fluent. The two-phase computational fluid dynamics (CFD) simulations are carried out in proximity to the critical point where real gas effects are relevant. The CO2 real gas properties are computed using an in-house Python code and integrated into the solver via user-defined functions as external look-up tables. This study provides valuable insights into the physical processes underlying two-phase shocks in CO2 flows and their sensitivity to geometric variations and thermodynamic conditions. The findings contribute to the development and modification of predictive models and optimized designs for systems involving two-phase CO2 flows. The results highlight the influence of geometry configurations and thermodynamic conditions on shock location and intensity, providing comparisons for shock waves occurring in two-phase flows and supercritical single-phase flows.

Identification of prospective oil-bearing areas in the peripheral parts of productive horizons U-12 and U-13 of the Zhetybai field

Background: To date, a comprehensive range of scientific, geological exploration, and appraisal work has been conducted at the Zhetybai field. The overall structural map of the field has been relatively well established. However, several critical issues remain insufficiently studied or entirely unexplored. Based on the results of seismic exploration (3D common depth point method) and additional appraisal work, peripheral (edge) zones of the field structure have been identified, including its cross-faults, as well as transverse flexures and longitudinal faults on the southern wing of the structure, which require further investigation. Aim: To further study the field structure, identify new potential hydrocarbon areas in the peripheral parts of the field, and assess the oil potential of the U-12 and U-13 horizons in the Zhetybai field. Materials and methods: This study involved a qualitative assessment of the informativeness of seismic attributes, analysis of reflection geometry (configuration), dynamic amplitude parameters, continuity of frequency, and other indicators. The analysis of reflection characteristics, in conjunction with all available data, primarily geophysical survey data, allowed for hypothesizing sedimentary conditions and obtaining acceptable lithological assessments. Results: The evaluation wells J-1, J-2, and J-3, drilled in 2023-2024 in the peripheral parts beyond the approved boundary of hydrocarbon-bearing horizons U-12 and U-13, yielded positive results. The productivity of the new reservoir was also confirmed by newly drilled production wells 5333, 5652, and 5367. Conclusion: To further study the structure of the Zhetybai field and identify new potential hydrocarbon-bearing areas in the peripheral parts, as well as structural uplifts and sandstone bodies of horizons U-12 and U-13, evaluation wells J-1, J-2, and J-3 were drilled. The detailed identification of sandstone bodies allows for the prediction of prospective areas not covered by drilling. The positive results from drilling evaluation wells have refined the geological structure of horizons U-12 and U-13 and confirmed the productivity of the peripheral parts of the reservoirs.

First experimental confirmation of island SOL geometry effects in a high radiation regime on W7-X

Abstract This work characterizes the detachment behavior and radiation characteristics of the low
iota configuration in the Wendelstein 7-X (W7-X) stellarator. The island scrape-off layer (SOL) of the
low iota has a poloidal mode number of 6 islands surrounding the last closed flux surface (LCFS).
The island geometry of the low iota configuration is significantly different to that of the standard
magnetic field configuration, whose detachment characteristics have already been described in previous
work[2, 3, 4]. Experimental results show that the radiation pattern in the low iota configuration
is starkly different to that of the standard magnetic field configuration, with radiation concentrated
at the island SOL O-points, rather than the X-points. Additionally, this O-point localized radiation
pattern is associated with unstable detachment, with both radiation oscillations in experiments and the
lack of a self-consistent plasma solution at high radiated power fraction in EMC3-Eirene simulations.
EMC3-Eirene simulations are used to understand the radiation distribution. It was found that the O-
point localized radiation arises first from local impurity accumulation near the parallel flow stagnation,
which is located close to the geometrical center of the island (”O-point”). The local cooling in this
region leads to plasma condensation in the islands in closest magnetic connection to the divertor target
plates. The heat source to this region of the island, which is thermally isolated from the upstream heat
source in terms of parallel transport, must arise via perpendicular heat transport. This heat source is
expected to be large for the low iota configuration due to its very small internal island field line pitch.
This work highlights the importance (complementary to previous work, e. g. [5, 6]) of the internal
island field line pitch not only on the radiation pattern, but also the detachment performance of the
island divertor.

Mirror-coupled plasmonic nanostructures for enhanced in-plane magnetic dipole emission

Abstract Self-assembling of plasmonic nanoparticles into an oligomer can produce optical nanoantennas with resonant magnetic responses, which constitutes a promising platform to study magnetic light-matter interactions at the nanoscale. However, these self-assembled magnetic nanostructures typically feature a flat-lying geometric configuration, giving rise to out-of-plane magnetic dipole (MD) moments that cannot couple to the far-field light efficiently. Herein, we propose a new geometric configuration of plasmonic nanoantennas to realize in-plane MD responses. This is achieved by elegantly coupling a plasmonic nanoparticle oligomer to one or more adjacent metal mirrors, virtually forming a vertically standing nanoparticle tetramer or trimer, yet with in-plane MD moments. We verified this design strategy by numerically simulating the resonance responses of three typical mirror-coupled nanostructures, all exhibiting pronounced resonant MD characters. Furthermore, optical magnetic emitters can be readily coupled to these plasmonic nanoantennas and gain an emission enhancement of two orders of magnitude while simultaneously featuring a high emission directionality (collection efficiency up to ∼ 70 % evaluated with common microscopy optics). We believe these mirror-enabled magnetic nanoantennas could lead to novel nanophotonic devices fully exploiting the magnetic nature of light.

Optimization of TIG welding process parameters using Taguchi technique for the joining of dissimilar metals of AA5083 and AA7075

This research paper aims to optimize the TIG welding parameters to join dissimilar metals of AA5083 and AA7075 using the Taguchi technique. The TIG welding current and root gap of butt geometry configuration are considered input parameters, and welding characteristics such as tensile strength, 0.2% of yield strength, hardness, and impact energy are output responses. The base metals are joined according to the Taguchi L-09 design of experiments. The welded samples were inspected using the X-ray radiography method for internal defects. Tensile properties, hardness number, and impact energy of different welding coupons were evaluated by conducting the uni-axial testing, a Brinell hardness test, and an Izod impact test, respectively. A better weld strength of 224 MPa was observed at 210 A welding current, and the root gap of 1.5 mm was maintained. Better hardness and impact energy values were observed when the root gap of 1.5 mm and welding current of 220 A were maintained. The root gap is the primary factor influencing tensile strength enhancement, which accounts for 44.78% of the effect, followed by 40.5% welding current. Root gap is the parameter that affects the tensile properties, hardness number, and impact toughness the most. The findings of this paper suggest the optimal parameters for welding AA5083 and AA7075 dissimilar base metals, which are suitable for complex structures requiring both durability and resistance to harsh environments.

Improving dynamic energy absorption performance and stability loss prediction of an all-PET sandwich structure through artificial neural networks

Abstract One key characteristic that is frequently studied in composite sandwich structure mechanics is low-velocity impact performance. Single polymer composites present higher ductility when compared to traditional glass fibre and carbon fibre reinforced plastic composites (GFRP, CFRP), which makes them strong candidates for impact energy absorption. These lightweight structures are also fully recyclable due to their all-PET constituents, an important aspect when considering possible applications. In this paper an existing second order composite SrPET and PET foam sandwich structure (self-reinforced poly-ethylene terephthalate matrix and fibre) is numerically investigated for optimal structural design configuration under out-ofplane, low velocity, dynamic loading. The study explores the parametric geometry interdependencies of the structure’s configuration with respect to its energy absorption potential. The results are then compared to the quasi-static loading performance behaviour studied by M.N. Velea et all [1]. This work provides a deeper understanding of how geometry configurations can influence energy absorption capabilities highlighting structural strengths and weaknesses while exploring non-equilateral triangle configurations. The Design Space Exploration (DSE) is carried out by using an optimization algorithm for a dynamic out of plane 3D impact simulation based on the finite element (FE) method software. The synergy between DSE and FE generates a guided simulation loop that can successfully be used to train a neural network to predict the dynamic behaviour of different geometric configurations from the exploration space. Based on the data samples obtained, an artificial neural network (ANN) is built to predict the energy absorption capacity for a given set of structural design parameters, useful in experimental validation test cases.

Periodic Single-Metal Site Catalysts: Creating Homogeneous and Ordered Atomic-Precision Structures.

Heterogeneous single-metal-site catalysts (SMSCs), often referred to as single-atom catalysts (SACs), demonstrate promising catalytic activity, selectivity, and stability across a wide spectrum of reactions due to their rationally designed microenvironments encompassing coordination geometry, binding ligands, and electronic configurations. However, the inherent disorderliness of SMSCs at both atomic scale and nanoscale poses challenges in deciphering working principles and establishing the correlations between microenvironments and the catalytic performances of SMSCs. The rearrangement of randomly dispersed single metals into homogeneous and atomic-precisely structured periodic single-metal site catalysts (PSMSCs) not only simplifies the chaos in SMSCs systems but also unveils new opportunities for manipulating catalytic performance and gaining profound insights into reaction mechanisms. Moreover, the synergistic effects of adjacent single metals and the integration effects of periodic single-metal arrangement further broaden the industrial application scope of SMSCs. This perspective offers a comprehensive overview of recent advancements and outlines prospective avenues for research in the design and characterizations of PSMSCs, while also acknowledging the formidable challenges encountered and the promising prospects that lie ahead.

Influence of pin fins and channel geometry on the hydrothermal performance of hexagonal mini-channel heat sink for cooling cylindrical batteries

This study numerically and experimentally examined the effects of pin fin configuration and channel geometry on the performance of a hexagonal mini-channel heat sink (HMCHS) to cool cylindrical lithium-ion battery cells. Various configurations of HMCHS with circular pin fins are studied, including circular fins centrally positioned within flat channels, circular fins positioned within grooved channels, circular fins situated within hybrid channels transitioning between wavy and straight channels and circular fins placed within hybrid channels that incorporate secondary flow channels between the primary flow channels. This numerical study utilized the finite volume method to investigate the laminar water flow at Reynolds numbers below 800. Findings showed that the HMCHS exhibited superior thermal performance compared with the conventional cylindrical mini-channel heat sink design. Moreover, the incorporation of pin fins into the HMCHS design was more effective in enhancing the Nusselt number than simply increasing the Reynolds number across various configurations. Meanwhile, the hybrid channel design with secondary channels, combined with the addition of pin fins, achieved the optimal overall performance of the HMCHS, resulting in the highest performance index of 1.88.

Dynamics of N-elastically longitudinal coupled rotating pendulums with smooth and discontinuous nonlinearities: Generation of chaotic bursting with many orbits as a solution

The dynamics of a mechanical network, consisting of a certain number (N) of cells, in which each unit cell consists of the irrational coupling of a simple pendulum and inclined mass-spring oscillator, is investigated. The single cell was recently introduced by Ning Han and Qingjie Cao, and it has strong irrational nonlinearity, exhibiting smooth and discontinuous characteristics due to the geometry configuration. The obtained network has a large degree of freedom and consequently has richer dynamics as compared to a single one. The set of discrete equations of this network is found, while the first equation is driven by an external sinusoidal force; the variables here are the angles between the vertical direction and the directions of mass in each unit cell. By using the non-driven version of this set of equations, the equilibrium points are found as well as their stability using the Jacobian matrix. Then, by using the multiple time scale method, the solutions of the set of the network equations are found for weak amplitude oscillations of the system, while the large amplitude solutions are found numerically, showing the ability of the network to transform the shape of some solutions at the input to other forms as the signals evolve in the network. One notices the generation of simple chaotic signals as well as the train of impulse signals. What is important here is the generation of the chaotic bursting with many orbits by the system, which are the simultaneous oscillations around several fixed points. For the case of numerous cells, the system can be used as a waveguide; this is why the set of the equation of the network is reduced to the extended complex Ginzburg Landau (ECGL) equation, with complex nonlinear dispersion and nonlocality terms, using the Tanuiti's reduction perturbation methods. The dissipative dark compacton and peakon as solutions for the ECGL equation are then found. The input-output matching of the network is next investigated via the transfer function of the system near the equilibrium points. The inverse Fourier transform of the transfer function multiplied by the Fourier transform of the input sinusoidal force gives the solution of the network equation for low amplitude oscillations. Finally, the supratransmission condition is studied, leading to the fact that the input sinusoidal signal with frequency nearly inside the forbidden gap zone gradually transforms into the train of chaotic bursting.

Insights Into Turbocharger Centrifugal Compressor Stability Using High-Fidelity CFD and a Novel Impeller Diffusion Factor

Abstract Turbocharger technologies are widely applied in the modern automotive industry to meet increasingly stringent carbon emission standards. To support the continuous enhancement of these tactics, delivering improvement to the performance and stability of turbocharger compressors at low mass flow rate regimes is of paramount importance. The present paper investigated the stability of a turbocharger compressor stage equipped with a ported shroud, using high-fidelity CFD simulations. It was found that the recirculated flow passing through the ported shroud device had primary influence on the flow condition in the vicinity of the impeller tip region (80% to 100% span). This discovery facilitated the definition of a modified impeller diffusion factor (DF), which was applied to the CFD results for three different compressor geometry configurations to lead to the provision of quantitative metrics for impeller stability. Furthermore, the observed change in the limiting impeller DF along the compressor surge line indicated that the dominant components governing the instability of the entire stage had switched, i.e., the stalling behavior of the compressor stage had transitioned from impeller dominated stall to vaneless diffuser dominated stall. Additionally, the limiting impeller DF clearly showed that one of the compressor configurations with a change in the hub endwall recess around the rear of the impeller improved the impeller stability by 3%. By comparison, another configuration with a change to strut geometry in the ported shroud recirculation channel reduced the impeller stability by 10%.

Numerical investigation of micropropulsion systems for CubeSats: Gas species and geometrical effects on nozzle performance

In the present investigation, a numerical investigation is conducted to investigate cold-gas micropropulsion devices for CubeSat orbital control. Different micronozzle geometry configurations and gas species are analyzed to assess their influence on the flowfield structure, surface properties, and microthruster performance parameters. Due to the small length scales, the Direct Simulation Monte Carlo (DSMC) method is used to simulate rarefied argon and nitrogen in rectangular and curved micronozzles. The results indicate that nitrogen gas leads to a 23% increase in specific impulse at a relatively insignificant thrust cost. On the other hand, the use of a curved geometry increases the specific impulse and thrust generated by 23% and 35%, respectively. The results indicate that using lighter gases for cold gas microthrusters increases the micropropulsion efficiency. In addition, curved geometries significantly improve the overall performance of such devices, in contrast to rectangular geometries.

Soft yet secure: Exploring membrane buckling for achieving a versatile grasp with a rotation-driven squeezing gripper

Nowadays, there is a growing demand for versatile robotic grippers that facilitate adaptive grasping across a range of objects, characterized by diverse attributes such as shapes, sizes, and mechanical properties. This research introduces a new soft gripper, denoted as ROSE (ROtation-based Squeezing GrippEr), dedicated to the torsional buckling phenomenon to achieve its grasping capability. The inherent gripping pattern, formed through a single rotational actuation, enables ROSE to dynamically accommodate various objects (relatively smaller than the diameter of ROSE), even in challenging environments like an oil container, without a complicated controller. Experimental tests demonstrate that ROSE exhibits substantial gripping force, reaching up to more than 300 N in the specific setup, and a remarkable payload-to-weight ratio. Especially, ROSE can maintain mechanical integrity through long-term open-close operation cycles in a specific condition. In this paper, we also introduce non-linear simulations for the elaboration of behaviors of ROSE concerning different morphologies, encompassing geometry configurations and material properties. The findings highlight a significant correlation between morphological features and grasping performance, leading to the refinement of a dependable version of ROSE. This refined version was subsequently assessed through experimental trials in crop harvesting tasks, where ROSE demonstrated high success rates in picking both individual and clustered crops, regardless of their soft or stiff characteristics. Project’s website with videos: https://sites.google.com/view/rosesoftgripper .

Preparation, Characterization, In Vitro Biological Evaluation, DFT Calculations, and Molecular Docking Investigations of 1H-Imidazole-2-Carboxylic acid and Histidine-Based Mixed-Ligand Complexes.

Mixed-ligand complexes incorporating 1H-Imidazole-2-Carboxylic acid (IMCA) and Histidine (LHIS) show promise for biomedical and biotechnological applications. This study synthesizes and characterizes FeIMCALHIS, CoIMCALHIS, and NiIMCALHIS coordination compounds using metal chloride salts (FeCl3.6H2O, CoCl2.6H2O, NiCl2.6H2O) in ethanolic solutions. The complexes are characterized by spectroscopic methods (IR, UV-vis, and mass spectra), elemental analysis, conductivity, magnetic, and thermal analysis. Molar conductivity indicates their non-electrolytic nature. UV-vis spectra reveal absorption bands with pathochromic shifts, and electronic spectra show characteristic metal-ligand transitions, indicating their structural configuration and coordination geometry. 3D geometry optimization shows six-coordination around Fe(III) and Co(II) in FeIMCALHIS and CoIMCALHIS, and four-coordination around Ni(II) in NiIMCALHIS. Analysis of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) suggests decreased electron donation ability upon coordination. Electronic structure parameters (HOMO, LUMO, ionization potential, energy gap, electron affinity, chemical potentials, and electronegativity) provide further insights into stability and reactivity. The metal complexes exhibit enhanced antimicrobial, antioxidant, and anti-inflammatory activity compared to individual ligands, with FeIMCALHIS showing notable antimicrobial activity. Molecular docking analysis reveals strong binding interactions with target proteins, highlighting their potential therapeutic applications.

Oxygen-Binding Sites of Enriched Gold Nanoclusters for Capturing Mitochondrial Reverse Electrons.

Reverse electron transfer (RET), an abnormal backward flow of electrons from complexes III/IV to II/I of mitochondria, causes the overproduction of a reduced-type CoQ to boost downstream production of mitochondrial superoxide anions that leads to ischemia-reperfusion injury (IRI) to organs. Herein, we studied low-coordinated gold nanoclusters (AuNCs) with abundant oxygen-binding sites to form an electron-demanding trapper that allowed rapid capture of electrons to compensate for the CoQ/CoQH2 imbalance during RET. The AuNCs were composed of only eight gold atoms that formed a Cs-symmetrical configuration with all gold atoms exposed on the edge site. The geometry and atomic configuration enhance oxygen intercalation to attain a d-band electron deficiency in frontier orbitals, forming an unusually high oxidation state for rapid mitochondrial reverse electron capture under a transient imbalance of CoQ/CoQH2 redox cycles. Using hepatic IRI cells/animals, we corroborated that the CoQ-like AuNCs prevent inflammation and liver damage from IRI via recovery of the mitochondrial function.

Assessing the efficacy of green walls versus street green lanes in mitigating air pollution: A critical evaluation

Urban green spaces, particularly street trees and greenways, are increasingly recognized as tools for mitigating air pollution. However, their effectiveness can vary depending on their configuration and urban canyon geometry. This study, aimed at providing practical solutions, assessed the impact of different green space configurations, including street trees, green lanes, green walls, and hedges, on particulate matter (PM) concentrations within urban canyons of varying aspect ratios by employing environmental simulations and wind tunnel tests performed in ENVI-met software.Results demonstrate that green walls significantly outperform street trees in reducing PM concentrations by up to 43%, attributing this to reduced air flow disruption. Green walls also create a more uniform PM distribution within canyons, decreasing concentration differences by 31% compared to green (tree) lanes. Conversely, dense tree lanes exacerbate PM deposition due to wind flow interference.These findings suggest that incorporating green walls into urban design can be a highly effective strategy for improving air quality within densely built environments.

Modeling of Flood Wave Propagation Due to Hemren Dam Failure

The occurrence of dam failures and the consequent floods pose substantial risks to submerged regions, and their unpredictability increases the hazard of their impact. This research simulates the flood event scenario due to the dam failure of the Hemrem dam in Diyala Governorate, Iraq. HEC-RAC model jas been used to modeling the Hemren dam failure. The generated flood waves are routed downstream until the confluence of the Diyala and Tigris rivers, covering a large study area of 5,378.5 km². The configuration of the model's geometry is formulated using the Digital Elevation Model (DEM) that encompasses the geographical extent of the Diyala River study area, from Hemren Dam to the confluence with the Tigris River south of Baghdad. The length of this reach is approximately 210 km. Based on the inundation maps, the region's geography is classified as having catastrophic constraints due to the water depth and flow rate. The results demonstrate how to predict the magnitude of floods and highlight the severity if Hemren Dam were to fail. This underscores the need for effective risk management. Furthermore, the maps created by this study can be utilized to develop long-term flood control plans.

Experimental behaviour of ductile diagonal connections for rack supported warehouses

Steel racking systems are widely adopted for storage purposes: they are thin-walled structures composed of consecutive trusses, connected with beams on which the palletized goods are stored. Their geometry and structural configuration strongly depend on market and operator necessities, and, in modern applications, racks can also function as the supporting structure of the warehouse itself in the form of Rack Supported or High-Bay Warehouses. With the increase of the overall geometric dimensions and the global weight of the stored material, the seismic action becomes more relevant for the design. Along these lines, the development and experimental testing of a dedicated seismic design approach for ductile steel racks is here presented, with particular attention to Rack Supported Warehouses. This approach exploits the ductility of trusses introduced via the plastic ovalization mechanism of the diagonal-to-upright connections while a tailored capacity design is used to assure the elastic behaviour of the rest of the structure and to keep the brittle failure mechanisms at bay.

Finite element analysis of Cu-water nanofluid flow and heat transfer in a dynamically bulging enclosure

PurposeThe main purpose of this study is to analyze the heat transfer phenomena in a dynamically bulging enclosure filled with Cu-water nanofluid. This study examines the convective heat transfer process induced by a bulging area considered a heat source, with the enclosure's side walls having a low temperature and top and bottom walls being treated as adiabatic. Various factors, such as the Rayleigh number (Ra), nanoparticle volume fraction, Darcy effects, Hartmann number (Ha) and effects of magnetic inclination, are analyzed for their impact on the flow behavior and temperature distribution.Design/methodology/approachThe finite element method (FEM) is employed for simulating variations in flow and temperature after validating the results. Solving the non-linear partial differential equations while incorporating the modified Darcy number (10−3 ≤ Da ≤ 10−1), Ra (103 ≤ Ra ≤ 105) and Ha (0 ≤ Ha ≤ 100) as the dimensionless operational parameters.FindingsThis study demonstrates that in enclosures with dynamically positioned bulges filled with Cu-water nanofluid, heat transfer is significantly influenced by the bulge location and nanoparticle volume fraction, which alter flow and heat patterns. The varying impact of magnetic fields on heat transfer depends on the Rayleigh and Has.Practical implicationsThe geometry configurations employed in this research have broad applications in various engineering disciplines, including heat exchangers, energy storage, biomedical systems and food processing.Originality/valueThis research provides insights into how different shapes of the heated bulging area impact the hydromagnetic convection of Cu-water nanofluid flow in a dynamically bulging-shaped porous system, encompassing curved surfaces and various multi-physical conditions.