Concern For Genotoxicity Research Articles

In vivo micronucleus assay on sodium molybdate in rats and its impact on the overall assessment of the genotoxicity of molybdenum substances

In this paper we present methodological and experimental details and results from an OECD Test Guideline 474 and GLP-compliant in vivo micronucleus study on sodium molybdate dihydrate in Sprague Dawley rats. Prior to the conduct of this study, there was a data-gap for reliable in vivo genotoxicity data for molybdenum substances. The presentation of the new study is complemented by a review of other available in vitro and in vivo data on the genotoxicity of molybdenum substances, focussing on substances where the contained or released molybdate ion, MoO42−, is considered the responsible moiety for any toxicological effect (grouping/category approach). After consideration of the relevance and reliability of all available data, the absence of a concern for genotoxicity of molybdate in vitro and in vivo is concluded.

Assessment of the feed additive consisting of a preparation containing a smoke flavouring extract for cats and dogs for the renewal of the authorisation (Azelis Denmark A/S)

Abstract Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the assessment of the application for the renewal of authorisation of a preparation containing a smoke flavouring extract for cats and dogs. The applicant provided data demonstrating that the additive currently on the market does not fully comply with the conditions of authorisation, but with newly proposed specifications based on different analytical methods. Considering that the additive under assessment contains benzofuran and styrene, for which a potential concern for genotoxicity has been identified, and that the whole mixture raises a potential concern for genotoxicity, additional data would be needed to complete the assessment. Therefore, the FEEDAP Panel is not in the position to conclude on the safety for cats and dogs. The additive is authorised for use in feed for cats and dogs, and therefore, there is no need to perform an assessment of the safety for the consumer and the environment. Regarding user safety, the additive should be considered as irritant to skin and eyes, and as a dermal and respiratory sensitiser. When handling the additive, exposure of unprotected users to potential genotoxic substances may occur. Therefore, to reduce the risk, the exposure of the users should be minimised. There was no need for assessing the efficacy of the additive in the context of the renewal of the authorisation.

Re-evaluation of silicon dioxide (E 551) as a food additive in foods for infants below 16 weeks of age and follow-up of its re-evaluation as a food additive for uses in foods for all population groups.

The present opinion is the follow-up of the conclusions and recommendations of the Scientific Opinion on the re-evaluation of silicon dioxide (E 551) as a food additive relevant to the safety assessment for all age groups. In addition, the risk assessment of silicon dioxide (E 551) for its use in food for infants below 16 weeks of age is performed. Based on the newly available information on the characterisation of the SAS used as E 551 and following the principles of the 2021 EFSA Guidance on Particle-TR, the conventional safety assessment has been complemented with nano-specific considerations. Given the uncertainties resulting from the limitations of the database and in the absence of genotoxicity concern, the Panel considered that it is not appropriate to derive an acceptable daily intake (ADI) but applied the margin of exposure (MOE) approach for the risk assessment. The Panel concluded that the MOE should be at least 36 for not raising a safety concern. The calculated MOEs considering the dietary exposure estimates for all population groups using the refined non-brand loyal scenario, estimated at the time of the 2018 re-evaluation, were all above 36. The Panel concluded that E 551 does not raise a safety concern in all population groups at the reported uses and use levels. The use of E 551 in food for infants below 16 weeks of age in FC 13.1.1 and FC 13.1.5.1 does not raise a safety concern at the current exposure levels. The Panel also concluded that the technical data provided support an amendment of the specifications for E 551 laid down in Commission Regulation (EU) No 231/2012. The paucity of toxicological studies with proper dispersion protocol (with the exception of the genotoxicity studies) creates uncertainty in the present assessment of the potential toxicological effects related to the exposure to E 551 nanosize aggregates.

Safety assessment of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt' for use in food contact materials.

The EFSA Panel on Food Contact Materials (FCM) assessed the safety of the substances 'wax, rice bran, oxidised' and 'wax, rice bran, oxidised, calcium salt', used as additives up to 0.3% in polyethylene terephthalate (PET), polyamide (PA), thermoplastic polyurethane (TPU), polylactic acid (PLA) and poly(vinyl chloride) (PVC) in contact with all food types for long-term storage at room temperature and below, after hot-fill and/or heating. The substances consist of the chemical classes wax esters, carboxylic acids, alcohols and calcium salts of acids, along with an unidentified organic fraction up to ■■■■■ w/w. Migration into 10% ethanol and 4% acetic acid was below 0.012 mg/kg for each chemical class, and about 0.001 mg/kg for the unidentified fraction. In isooctane, migration was up to 0.297 mg/kg food for wax esters, below 0.01 mg/kg food for the other chemical classes and about 0.02 mg/kg food for the unidentified fraction. The contact with dry food and food simulated by 20% ethanol were considered covered by the migration tests with aqueous simulants. Based on genotoxicity assays and compositional analyses, the constituents of the chemical classes did not raise a concern for genotoxicity. The potential migration of individual constituents or groups of chemically-related compounds of the unidentified fraction would result in exposures below (for aqueous food) and above (for fatty food) the threshold of toxicological concern for genotoxic carcinogens. Therefore, the FCM Panel concluded that the substances are not of safety concern for the consumer, if used as additives up to 0.3% w/w in PET, PLA and rigid PVC materials and articles intended for contact with all food types except for fatty foods, for long-term storage at room temperature and below, including hot-fill and/or heating up to 100°C for up to 2 h.

Safety of soy leghemoglobin from genetically modified Komagataella phaffii as a food additive.

The EFSA Panel on Food Additive and Flavourings (FAF Panel) provides a scientific opinion on the safety of soy leghemoglobin from genetically modified Komagataella phaffii as a food additive in accordance with Regulation (EC) No 1331/2008. The proposed food additive, LegH Prep, is intended to be used as a colour in meat analogue products. The yeast Komagataella phaffii strain MXY0541 has been genetically modified to produce soy leghemoglobin; the safety of the genetic modification is under assessment by the EFSA GMO Panel (EFSA-GMO-NL-2019-162). The amount of haem iron provided by soy leghemoglobin from its proposed uses in meat analogue products is comparable to that provided by similar amounts of different types of meat. The exposure to iron from the proposed food additive, both at the mean and 95th percentile exposure, will be below the 'safe levels of intake' established by the NDA Panel for all population groups. Considering that the components of the proposed food additive will be digested to small peptide, amino acids and haem B; the recipient (non GM) strain qualifies for qualified presumption of safety status; no genotoxicity concern has been identified and no adverse effects have been identified at the highest dose tested in the available toxicological studies, the Panel concluded that there was no need to set a numerical acceptable daily intake (ADI) and that the food additive does not raise a safety concern at the proposed use in food category 12.9 and maximum use level. The Panel concluded that the use of soy leghemoglobin from genetically modified Komagataella phaffii MXY0541 as a new food additive does not raise a safety concern at the proposed use and use level. This safety evaluation of the proposed food additive remains provisional subject to the ongoing safety assessment of the genetic modification of the production strain by the GMO Panel (EFSA-GMO-NL-2019-162).

Safety and efficacy of a feed additive consisting of Macleaya cordata (Willd.) R. Br. extract and leaves (Sangrovit® Extra) for suckling and weaned piglets and other growing Suidae (Phytobiotics Futterzusatzstoffe GmbH).

Following a request from the European Commission, EFSA was asked to deliver a scientific opinion on the safety and efficacy of Macleaya cordata (Willd.) R. Br. extract and leaves (Sangrovit® Extra) as a zootechnical feed additive for suckling and weaned piglets and other growing Suidae. The additive is standardised to contain a concentration of the sum of the four alkaloids sanguinarine, chelerythrine, protopine and allocryptopine of 1.25%, with 0.5% sanguinarine. Owing to the presence of the DNA intercalators sanguinarine and chelerythrine, a concern for genotoxicity was identified. The EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP) had no safety concerns for the target species when the additive is used at the recommended level of 0.750 mg sanguinarine/kg complete feed for suckling and weaned piglets and other growing Suidae. Since in all consumer categories the exposure to sanguinarine and chelerythrine via the use of Sangrovit® Extra exceeds the threshold of toxicological concern of 0.0025 μg/kg bw per day for DNA reactive mutagens and/or carcinogens, the FEEDAP Panel could not conclude on the safety for the consumers. The additive was shown to be irritant to the eyes but not irritant to skin or a skin sensitiser. The FEEDAP Panel could not exclude the potential of the additive to be a respiratory sensitiser. When handling the additive, exposure of unprotected users to sanguinarine and chelerythrine may occur. Therefore, to reduce the risk, the exposure of users should be reduced. The use of Sangrovit® Extra as a feed additive under the proposed conditions of use was considered safe for the environment. The additive Sangrovit® Extra had the potential to be efficacious in improving performance of weaned piglets at 0.600 mg sanguinarine/kg complete feed. This conclusion was extended to suckling piglets and extrapolated to other growing Suidae.

Safety assessment of the substance amines, di-C14-C20-alkyl, oxidised, from hydrogenated vegetable oil, for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of amines, di-C14-C18-alkyl, oxidised, renamed by the Panel as amines, di-C14-C20-alkyl, oxidised, from hydrogenated vegetable oil. The substance amines, bis(hydrogenated tallow alkyl) oxidised, consisting of the same components, but originating from tallow, is currently authorised as FCM substance No 768. The vegetable-sourced substance is intended to be used at up to 0.1% w/w as antioxidant and/or stabiliser in the manufacture of polyolefin food contact materials (FCM) and articles intended for contact with dry, aqueous and acidic foods. The substance is a mixture consisting of linear N,N-dialkyl hydroxylamines and their corresponding amine, nitrone and oxime derivatives, as well as further components: tert-N-oxides, secondary amides and carboxylic acids. Specific migration was tested from polyethylene samples in 10% ethanol and 3% acetic acid for 2 h at 100°C followed by 10 days at 60°C. None of the non-authorised components were detected to migrate at detection limits (LoD) in the range 0.003-0.029 mg/kg. The LoD of authorised carboxylic acids was 0.35 mg/kg. The Panel reassessed the genotoxicity studies carried out on FCM No 768 and evaluated two new bacterial reverse mutation tests on the nitrone and oxime derivatives as well as new (qualitative/quantitative) structure-activity relationship (Q)SAR analyses on other components. The Panel concluded that the substance did not raise a concern for genotoxicity. The Panel concluded that the substance is not of safety concern for the consumers if it is used as an additive at 0.1% w/w in the manufacture of polyolefin FCM intended to be in contact with foods simulated by food simulants A, B, C and E, except for infant formula and human milk, for storage above 6 months at room temperature and below, including hot-fill conditions and heating up to 100°C for 2 h.

Scientific Opinion on additional scientific data related to the safety of preparations of Rheum palmatum L., Rheum officinale Baill. and their hybrids, Rhamnus purshianaDC., Rhamnus frangula L. and Cassia senna L., submitted pursuant to Article 8(4) of Regulation (EC) No 1925/2006.

The Panel on Nutrition, Novel Foods and Food Allergens (NDA) was asked to deliver a scientific opinion on the safety of plant preparations from the root or rhizome of Rheum palmatum L., Rheum officinale Baill. and their hybrids, from the bark of Rhamnus frangula L. and Rhamnus purshiana DC. and from the leaf or fruit of Cassia senna L., which have been placed under Union scrutiny in Part C of Annex III in accordance with Article 8(4) of Regulation (EC) No 1925/2006. The NDA Panel reviewed the additional scientific data submitted during the period of scrutiny and the public consultation by interested parties. The pertinent scientific data were invitro and invivo genotoxicity studies on the plant preparations under consideration. All the results of the genotoxicity studies on plant preparations were negative. However, the plant preparations that were tested in the submitted studies were not sufficiently characterised with respect to the content of total and individual hydroxyanthracene derivatives (HADs) and components other than HADs. The studies confirmed the presence of ■■■■■, known to be genotoxic invivo, and ■■■■■, shown to be genotoxic invitro. In line with the EFSA Scientific Committee statement on genotoxicity assessment of chemical mixtures, considering the presence of an invivo genotoxic compound, the plant preparations used in these studies have to be considered of concern for genotoxicity. Thus, the safety of preparations containing HADs from the root or rhizome of Rheum palmatum L., Rheum officinale Baill. and their hybrids, from the leaf or fruit of Cassia senna L. and from the bark of Rhamnus frangula L. and Rhamnus purshiana DC. cannot be established based on the submitted studies.

Safety assessment of the substance 'phosphorous acid, triphenyl ester, polymer with 1,4-cyclohexanedimethanol and polypropylene glycol, C10-16 alkyl esters', for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the substance 'phosphorous acid, triphenyl ester, polymer with 1,4-cyclohexanedimethanol and polypropylene glycol, C10-16 alkyl esters', when used as an additive in all types of polyolefins. The substance is a polymer containing ≤ 13% w/w of a low molecular weight fraction (LMWF, < 1000 Da). A polyethylene sample with 0.15% w/w of the substance was used in a comprehensive set of migration tests with food simulants. The specific migration was up to 0.014 and 0.023 mg/kg in 4% acetic acid and 10% ethanol, respectively. Migration into olive oil was estimated by the Panel to be up to 5.3 mg/kg under worst-case conditions of use. The migrating LMWF species were comprehensively identified. Those without phosphorous were either without alerts for genotoxicity or listed in Regulation (EU) 10/2011 with worst-case migrations well below their respective specific migration limits. Toxicological studies were performed using phosphite and phosphate versions of the substance enriched in its LMWF. The substance does not raise a concern for genotoxicity. From a repeated dose 90-day oral toxicity study in rats with a 50:50 phosphite:phosphate blend, the Panel identified a NOAEL of 250 mg/kg bw per day for each component of the blend. No delayed neurotoxicity in hens was observed. The CEP Panel concluded that the substance does not raise a safety concern for the consumer if its LMWF is not higher than 13% w/w, if it is used at up to 0.15% w/w in polyolefin materials and articles intended for contact with all food types, except for infant formula and human milk, for long-term storage at room temperature and below, after hot-fill and/or heating up to 100°C for up to 2 h, and if its migration does not exceed 5 mg/kg food.

Safety assessment of the substance calcium tert-butylphosphonate for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids assessed the safety of calcium tert-butylphosphonate, which is intended to be used as a nucleating agent up to 0.15% w/w for the manufacture of polyolefin food contact materials (FCM) and articles for single and repeated use, in contact with all types of food, including infant formula and human milk. Specific migration was tested using polyethylene samples in 10% ethanol, 3% acetic acid and 95% ethanol for 2 h at 100°C, followed by 238 h at 40°C. Results for all three simulants were near or below the limit of detection of 10 μg/kg. As the solubility of the substance is far above the reported migration and above 60 mg/kg food, no assessment of the particle fraction was needed, and the conventional risk assessment was followed. The substance did not induce gene mutations in bacterial cells and structural chromosomal aberrations in mammalian cells, thus, did not raise concern for genotoxicity. The Panel considered that the use of the substance did not give rise to safety concern related to neurotoxicity for the general population, but this conclusion could not be applied to infants below 16 weeks of age, due to their specific sensitivity and the absence of dedicated data. The Panel concluded that calcium tert-butylphosphonate does not raise a safety concern for the consumer if it is used as a nucleating agent up to 0.15% w/w in the manufacture of polyolefin FCM that are intended to be in contact with all types of food for storage above 6 months at room temperature and below, including temperatures up to 100°C for maximum 2 h and up to 130°C for short durations. The Panel could not evaluate the safety of use to manufacture FCM for contact with infant formula and human milk.

Safety of titanium dioxide (E171) as a food additive for humans.

Titanium dioxide (TiO2), also known as E171, is commonly used as a white colorant in food, pharmaceuticals, cosmetics, and toothpaste. However, in May 2021, the European Food Safety Authority (EFSA) expert panel, in evaluating the safety of titanium dioxide (E171) as a food additive, concluded that a concern for genotoxicity could not be ruled out. This occurred several years after EFSA had previously considered titanium dioxide to be safe as a food additive. EFSA based this new interpretation on the results of genotoxicity tests of TiO2 nanomaterials. EFSA noted that available data are insufficient to define threshold doses/concentrations of TiO2 particles below which genotoxicity will not occur in tissues containing these particles. Here, it is argued that EFSA made a manifest error regarding the safety of titanium dioxide (E171) particles as a food additive for humans. First, the notion of particle size distribution of TiO2 particles is explained. Second, the changing opinions from the various EFSA evaluations in 2016, 2018, 2019 vs. 2021 are discussed. Third, the low toxicity of TiO2 particles is described in rats exposed by oral gavage and feeding studies in rats and mice. Fourth, the importance of low absorption rates from the gastrointestinal tract vs. circulation in rats and humans but not in mice is identified. Fifth, other international health scientists have weighed in on the EFSA (EFSA J, 2021, 19 (5), 6585) decision and generally disagreed with EFSA's opinion on the safety of E171 TiO2. A common theme voiced by the United Kingdom, Canada, Australia, and New Zealand agencies is that it is inappropriate to compare nanoparticle toxicity studies of dispersed/sonicated nanoparticles with the content of E171 TiO2 in foods because the test materials used in key studies considered by EFSA (EFSA J, 2021, 19 (5), 6585) are not representative of E171 TiO2 particles. Finally, a group of experts recently considered the genotoxicity of TiO2 and could not find support for a direct DNA damaging mechanism of TiO2 (nano and other forms). For these reasons, it is suggested that EFSA made a manifest error on the safety of E171 as a food additive.

Scientific opinion on the renewal of the authorisation of Smoke Concentrate 809045 (SF-003) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Smoke Concentrate 809045 (SF-003), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Product Smoke Concentrate 809045 is obtained by pyrolysis of beech wood. The Panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.1 to 1.5 mg/kg body weight (bw) per day at the mean and from 0.2 to 5.2 mg/kg bw per day at the 95th percentile. The Panel concluded that eleven components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Zesti Smoke Code 10 (SF-002) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Zesti Smoke Code 10 (SF-002), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of thePrimary Product. Zesti Smoke Code 10 is obtained by pyrolysis of hickory and oak woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.02 to 4.6 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 13.0 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of SmokEz C-10 (SF-005) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmoKEz C-10 (SF-005), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmoKEz C-10 is obtained by pyrolysis of maple, oak, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 5.1 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 18.1 mg/kg bw per day at the 95th percentile. The Panel concluded that five components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of SmokEz Enviro-23 (SF-006) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product SmokEz Enviro-23 (SF-006), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. SmokEz Enviro-23 is obtained by pyrolysis of oak, maple, hickory, ash, birch, beech and cherry woods. Given the limitations of the quantification approach employed by the applicant, the Panel could not judge whether the applied methods meet the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.01 to 3.2 mg/kg body weight (bw) per day at the mean and from no dietary exposure to 9.5 mg/kg bw per day at the 95th percentile. The Panel concluded that four components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one and benzene-1,2-diol, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for these two components are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of Fumokomp (SF-009) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Fumokomp (SF-009), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003 (in the renewal application the Primary Product is reported as 'Fumokomp Conc.'). This opinion refers to an assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Fumokomp Conc. is produced by pyrolysis of beech and hornbeam woods. Gas chromatography-mass spectrometry (GC-MS) was applied for both identification and quantification of the volatile constituents of the Primary Product. Given the limitations of the method, the Panel cannot judge with confidence whether the applied method meets the legal quality criterion that at least 80% of the volatile fraction shall be identified and quantified. Moreover, the Panel concluded that the absence of furan-2(5H)-one from the Primary Product was not convincingly demonstrated. At the maximum proposed use levels, dietary exposure estimates calculated with FAIM ranged from 0.04 to 0.9 mg/kg body weight (bw) per day at the mean and from 0.1 to 1.5 mg/kg bw per day at the 95th percentile. The information available on the 32 identified components of the Primary Product, although limited, did not indicate a concern for genotoxicity for any of these substances. However, whole mixture testing in an in vitro mouse lymphoma assay gave positive results which would require an adequate in vivo follow-up study. In addition, the potential for aneugenicity of the Primary Product has not been adequately investigated. Accordingly, the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of Scansmoke SEF7525 (SF-004) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product Scansmoke SEF7525 (SF-004), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. Scansmoke SEF7525 is obtained from a tar produced from a mixture of red oak, white oak, maple, beech and hickory. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 32.6 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with Food Additive Intake Model (FAIM) ranged from 0.6 to 3.8 mg/kg body weight (bw) per day at the mean and from 1.1 to 10.1 mg/kg bw per day at the 95th percentile. Based on the available information on genotoxicity on 44 identified components, the Panel concluded that two substances in the Primary Product, styrene and benzofuran, raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. Considering that the exposure estimates for styrene and benzofuran are above the threshold of toxicological concern (TTC) value of 0.0025 kg/kg bw per day for DNA-reactive mutagens and/or carcinogens and since further data are needed to clarify their potential genotoxicity, the Panel concluded that the potential safety concern for genotoxicity of the Primary Product cannot be ruled out.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R714 (SF-001) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R714 (SF-001), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R714 is obtained by pyrolysis of beech and oak woods as main source materials. Based on the compositional data, the Panel noted that the identified and quantified proportion of the solvent-free fraction amounts to 39 weight (wt)%, thus the applied method does not meet the legal quality criterion that at least 50% of the solvent-free fraction shall be identified and quantified. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.7 to 10.9 mg/kg body weight (bw) per day at the mean and from 2.2 to 42.5 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the threshold of toxicological concern (TTC) of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the Panel concluded that the Primary Product raises concern with respect to genotoxicity.

Scientific opinion on the renewal of the authorisation of proFagus Smoke R709 (SF-008) as a smoke flavouring Primary Product.

The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the smoke flavouring Primary Product proFagus Smoke R709 (SF-008), for which a renewal application was submitted in accordance with Article 12(1) of Regulation (EC) No 2065/2003. This opinion refers to the assessment of data submitted on chemical characterisation, dietary exposure and genotoxicity of the Primary Product. ProFagus Smoke R709 is obtained by pyrolysis of beech and oak wood as main source materials. The panel concluded that the compositional data provided on the Primary Product are adequate. At the maximum proposed use levels, dietary exposure estimates calculated with DietEx ranged from 0.8 to 12.2 mg/kg body weight (bw) per day at the mean and from 2.3 to 51.4 mg/kg bw per day at the 95th percentile. The Panel concluded that three components in the Primary Product raise a potential concern for genotoxicity. In addition, a potential concern for genotoxicity was identified for the unidentified part of the mixture. The Primary Product contains furan-2(5H)-one, for which a concern for genotoxicity was identified in vivo upon oral administration. Considering that the exposure estimates for this component are above the TTC of 0.0025 μg/kg bw per day for DNA-reactive mutagens and/or carcinogens, the panel concluded that the Primary Product raises concern with respect to genotoxicity.

Safety assessment of the substance poly(2-hydroxypropanoic acid), n-octyl/n-decyl esters, for use in food contact materials.

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of poly(2-hydroxypropanoic acid), n-octyl/n-decyl esters (OLA8), which is intended to be used as a plasticiser into polylactic acid (PLA) in contact with non-fatty foods. OLA8 is intended to be used at up to 5% and 15% w/w with or without starch, respectively (or with other additives with similar function). The migration for 10 days at 40°C from the film without starch was 0.16 mg/kg in 10% ethanol and 0.01 mg/kg in 3% acetic acid, while from the film with the starch it was well above 0.05 mg/kg food in all simulants. Some of the testing conditions were inconsistently reported. The substance did not induce gene mutations in bacterial cells and did not induce structural chromosomal aberrations or polyploidy in mammalian cells, thus, does not raise concern for genotoxicity. Instead of providing a 90-day oral toxicity study, a hydrolysis study in ■■■■■ was submitted to read-across from the authorised starting substances, ■■■■■ and the ■■■■■. However, the data provided did not allow to perform the read-across, thus no appropriate toxicological data were provided to support migration above 0.05 mg/kg food (including for contact with 10% ethanol and use in combination with starch). The Panel concluded that OLA8 does not raise a safety concern for the consumer if it is used as an additive at up to 15% w/w in the manufacture of PLA articles that do not contain starch (and other additives with similar function), that are intended to be in contact for 10 days at 40°C with foods simulated by 3% acetic acid and from which the migration does not exceed 0.05 mg/kg food.