Wavelength Tunable Femtosecond Pulse Generation Research Articles

Theoretical analysis of self-phase-modulation-enabled spectral selection in hollow-core fibers: effect of ionization

We propose the generation of wavelength-tunable femtosecond pulses with µJ energy based on spectral broadening in hollow-core fibers (HCFs) filled with noble gas. A proper combination of gas type, gas pressure, and the HCF core radius ensures that the broadened spectrum consists of isolated spectral lobes; the selection of the outermost spectral lobes produces nearly transform-limited pulses. We performed a detailed numerical investigation of this method based on an antiresonant HCF with a 20 µm core radius filled with 17.3 bar Xe gas. By using 1.03 µm, 200 fs pulses with up to 20 µJ energy as the excitation pulse, this method can produce 100 fs pulses tuned from 0.74 to 1.25 µm with up to 5 µJ pulse energy. Further energy scaling is limited by the onset of ionization, which reduces the wavelength tuning range and causes a significant spectral blue shift. Increasing the input pulse energy beyond 45 µJ creates a strong spectral lobe peaking in the wavelength range of 0.92–0.95 µm with >10µJ energy. These results represent a two orders of magnitude improvement in the pulse energy compared to current tunable femtosecond sources based on nonlinear wavelength conversion in solid-core optical fibers.

Fiber-laser-based femtosecond parametric generator in bulk periodically poled LiNbO_3

A diode-pumped system for optical parametric generation of wavelength-tunable femtosecond pulses is demonstrated. It comprises an Er-doped fiber mode-locked laser, a fiber chirped-pulse amplifier, and a bulk periodically poled LiNbO(3) (PPLN) optical parametric generator. The parametric generator is pumped at 777 nm with frequency-doubled microjoule pulses from the fiber amplifier and produces 300-fs pulses tunable from 1 to 3microm with output energies up to ~200 nJ. Use of a PPLN nonlinear crystal substantially reduces the pump energies required for efficient parametric generation. Saturated single-pass parametric energy conversion of 38% (internal) has been achieved with only 220 nJ of pump inside the crystal. A parametric generation threshold of 54 nJ is observed, and efficient parametric conversion is obtained with repetition rates up to 200 kHz.