Optical Frequency Comb Generation Research Articles

An approach to generate cross-polarization modulation-enabled optical frequency comb with enhanced spectral flatness in traveling-wave semiconductor optical amplifiers

Abstract This paper proposes a method for generating an optical frequency comb (OFC) using the cross-polarization modulation (XPolM) effect in a traveling-wave semiconductor optical amplifier (TW-SOA). The TW-SOA acted as a lumped amplifier, enabling pulse generation within the comb. The proposed method of OFC generation achieved a comb spectrum with 51 lines and a maximum power deviation of 1.8 dB, indicating excellent spectral flatness. The proposed approach effectively utilized XPolM in a TW-SOA to create broad flat OFCs. The effectiveness of XPolM depends on various SOA parameters, such as pump and signal powers, and the confinement factor. To understand the XPolM-enabled OFC behavior, various parameters, such as input polarization, bias current, SOA confinement factor, and carrier density, have been optimized. These parameters significantly influenced the generated comb spectrum. This study also provides valuable insights into optimizing comb characteristics through theoretical analysis. The proposed OFC generation was simulated using an OptiSystem simulator. This has paved the way for the potential use of the comb as a multichannel source in various optical devices.

Giant Kerr nonlinearity of terahertz waves mediated by stimulated phonon polaritons in a microcavity chip

Optical Kerr effect, in which input light intensity linearly alters the refractive index, has enabled the generation of optical solitons, supercontinuum spectra, and frequency combs, playing vital roles in the on-chip devices, fiber communications, and quantum manipulations. Especially, terahertz Kerr effect, featuring fascinating prospects in future high-rate computing, artificial intelligence, and cloud-based technologies, encounters a great challenge due to the rather low power density and feeble Kerr response. Here, we demonstrate a giant terahertz frequency Kerr nonlinearity mediated by stimulated phonon polaritons. Under the influences of the giant Kerr nonlinearity, the power-dependent refractive index change would result in a frequency shift in the microcavity, which was experimentally demonstrated via the measurement of the resonant mode of a chip-scale lithium niobate Fabry-Pérot microcavity. Attributed to the existence of stimulated phonon polaritons, the nonlinear coefficient extracted from the frequency shifts is orders of magnitude larger than that of visible and infrared light, which is also theoretically demonstrated by nonlinear Huang equations. This work opens an avenue for many rich and fruitful terahertz Kerr effect based physical, chemical, and biological systems that have terahertz fingerprints.

Direct-modulation optoelectronic oscillator for optical pulse and frequency comb generation

We report the generation of an optical pulse train with a 10 GHz repetition rate in a dual loop direct-modulation optoelectronic oscillator (OEO). Pulse generation is achieved using nonlinear compression in the OEO 5-km-long optical delay line. 3 ps pulses with a timing jitter of 13 fs are reported, while the OEO maintains a phase noise of −133dBc/Hz at 10 kHz from the carrier. Two architectures are compared experimentally and theoretically. A frequency comb with a 1.2 THz linewidth at −30dB is generated.

Observation of topological frequency combs.

On-chip generation of optical frequency combs using nonlinear ring resonators has enabled numerous applications of combs that were otherwise limited to mode-locked lasers. Nevertheless, on-chip frequency combs have relied predominantly on single-ring resonators. In this study, we experimentally demonstrate the generation of a novel class of frequency combs, the topological frequency combs, in a two-dimensional lattice of hundreds of ring resonators that hosts fabrication-robust topological edge states with linear dispersion. By pumping these edge states, we demonstrate the generation of a nested frequency comb that shows oscillation of multiple edge state resonances across ≈40 longitudinal modes and is spatially confined at the lattice edge. Our results provide an opportunity to explore the interplay between topological physics and nonlinear frequency comb generation in a commercially available nanophotonic platform.

Active offset-frequency control of optical frequency comb via sum-frequency mixing of passively mode-locked laser and continuous-wave laser

We propose a method for actively controlling the frequency of an optical frequency comb (OFC) using sum-frequency generation (SFG) with a nonlinear crystal. For the first time, OFC generation was experimentally demonstrated via sum-frequency mixing of a narrowband continuous wave (CW) laser and a passively mode-locked fiber laser. By adjusting the optical frequency of the CW laser, we successfully controlled the offset-frequency of the SFG-OFC, which was mapped from the OFC of the pulse pump laser. Furthermore, by comparing the spectral widths of the SFG-OFC modes generated from two CW lasers with different spectral widths, we confirmed that the spectral characteristics of the SFG-OFC modes depended on the spectral features of the CW laser.

Nonlinear Schrödinger equation for integrated photonics

The foundations of nonlinear optics are revisited, and the formalism is applied to waveguide modes. The effects of loss and dispersion are included rigorously along with the vectorial nature of the modes, and a full derivation of a new version of the nonlinear Schrödinger (NLS) equation is presented. This leads to more general expressions for the group index, for the group-index dispersion (GVD), and for the Kerr coefficient. These quantities are essential for the design of waveguides suitable for, e.g., the generation of optical frequency combs and all-optical switches. Examples are given using the silicon nitride material platform. Specifically, values are extracted for the coefficients of the chi-3 tensor based on measurements of Kerr coefficients and mode simulations.

Optical Frequency Comb Generation in Gain Switched Semiconductor Nanolasers With Optical Injection

Optical Frequency Comb Generation in Gain Switched Semiconductor Nanolasers With Optical Injection

Frequency comb generation via synchronous pumped χ(3) resonator on thin-film lithium niobate

Resonator-based optical frequency comb generation is an enabling technology for a myriad of applications ranging from communications to precision spectroscopy. These frequency combs can be generated in nonlinear resonators driven using either continuous-wave (CW) light, which requires alignment of the pump frequency with the cavity resonance, or pulsed light, which also mandates that the pulse repetition rate and cavity free spectral range (FSR) are carefully matched. Advancements in nanophotonics have ignited interest in chip-scale optical frequency combs. However, realizing pulse-driven on-chip Kerr combs remains challenging, as microresonator cavities have limited tuning range in their FSR and resonance frequency. Here, we take steps to overcome this limitation and demonstrate broadband frequency comb generation using a χ(3) resonator synchronously pumped by a tunable femtosecond pulse generator with on-chip amplitude and phase modulators. Notably, employing pulsed pumping overcomes limitations in Kerr comb generation typically seen in crystalline resonators from stimulated Raman scattering.

Enhanced ultra-wideband optical frequency comb generation based on cross-polarization modulation effect of semiconductor optical amplifier

Enhanced ultra-wideband optical frequency comb generation based on cross-polarization modulation effect of semiconductor optical amplifier

Channelized multi-frequency measurement system based on asymmetric double sideband detection

A channelized multi-frequency measurement system based on asymmetric double sideband detection is proposed. In this scheme, the sub-modulators of the dual-parallel Mach–Zehnder modulator are utilized for optical frequency comb (OFC) generation and under-test signal modulation. Subsequently, a sawtooth wave voltage is applied to the main modulator to introduce frequency shift to the modulated signals, breaking the symmetry between the RF signals and the OFC. The coupled signal is then divided into upper and lower sidebands for frequency down-conversion. By calibrating the measurement results of the two sidebands with each other, the frequency of the signal can be accurately measured. Simulation is preformed to realize multi-frequency measurement of microwave signals with measurement error less than 2 MHz in the range of 2.2–20 GHz. It is also found that the proposal can solve the problem of frequency ambiguity.

Damascene Process Development for Low-Loss Photonics Devices with Applications in Frequency Comb

Silicon nitride (SiN) is emerging as a material of choice for photonic integrated circuits (PICs) due to its ultralow optical losses, absence of two-photon absorption in telecommunication bands, strong Kerr nonlinearity and high-power handling capability. These properties make SiN particularly well-suited for applications such as delay lines, chip-scale frequency combs and narrow-linewidth lasers, especially when implemented with thick SiN waveguides, which is achieved through low-pressure chemical vapor deposition (LPCVD). However, a significant challenge arises when the LPCVD SiN film thickness exceeds 300 nm on an 8-inch wafer, as this can result in cracking due to high stress. In this work, we successfully develop a damascene process to fabricate 800 nm-thick SiN photonics devices on an 8-inch wafer in a pilot line, overcoming cracking challenges. The resulting 2 × 2 multimode interference (MMI) coupler exhibits low excess loss (−0.1 dB) and imbalance (0.06 dB) at the wavelength of 1310 nm. Furthermore, the dispersion-engineered SiN micro-ring resonator exhibits a quality (Q) factor exceeding 1 × 106, enabling the generation of optical frequency combs. Our demonstration of photonics devices utilizing the photonics damascene process sets the stage for high-volume manufacturing and widespread deployment.

Broadband Optical Frequency Comb Generation Based on a Dual-Pumped Brillouin-Erbium Fiber Laser

Broadband Optical Frequency Comb Generation Based on a Dual-Pumped Brillouin-Erbium Fiber Laser

1.12Tbps-16QAM Uncompensated Long-Haul Transmission Employing a New Self-Oscillating Optical Frequency Comb Generator Both at Transmitter and Receiver

1.12Tbps-16QAM Uncompensated Long-Haul Transmission Employing a New Self-Oscillating Optical Frequency Comb Generator Both at Transmitter and Receiver

Line-Spacing-Multiplied Optical Frequency Comb Generation Using an Electro-Optic Talbot Laser and Cross-Phase Modulation in a Fiber

An optical frequency comb (OFC) generator based on an electro-optic Talbot laser and cross-phase modulation (XPM) in a high nonlinear fiber (HNLF) is designed and demonstrated. The Talbot laser is an electro-optic frequency shifting loop that is used to produce repetition rate-multiplied pulses, and these pulses work as a pump signal that induces the XPM process in the HNLF to modulate the phase of a probe signal. At the output of the HNLF, OFCs with a multiplied line spacing can be generated. The effects of the pump power and the HNLF length on the performance of the generated OFCs are theoretically analyzed. In the experiments, the line spacing of the generated OFCs is multiplied to be 10 GHz, 15 GHz, and 20 GHz with a factor of 2, 3, and 4, respectively. The center of the OFCs is tuned in a 4 nm range by adjusting the wavelength of the probe signal.

Active mid-infrared ring resonators

High-quality optical ring resonators can confine light in a small volume and store it for millions of roundtrips. They have enabled the dramatic size reduction from laboratory scale to chip level of optical filters, modulators, frequency converters, and frequency comb generators in the visible and the near-infrared. The mid-infrared spectral region (3−12 μm), as important as it is for molecular gas sensing and spectroscopy, lags behind in development of integrated photonic components. Here we demonstrate the integration of mid-infrared ring resonators and directional couplers, incorporating a quantum cascade active region in the waveguide core. It enables electrical control of the resonant frequency, its quality factor, the coupling regime and the coupling coefficient. We show that one device, depending on its operating point, can act as a tunable filter, a nonlinear frequency converter, or a frequency comb generator. These concepts extend to the integration of multiple active resonators and waveguides in arbitrary configurations, thus allowing the implementation of purpose-specific mid-infrared active photonic integrated circuits for spectroscopy, communication, and microwave generation.

Flexible broadband optical frequency comb generation assisted by injection locking of semiconductor laser

A broadband optical frequency comb (OFC) generator is proposed and experimentally demonstrated. Based on the injection locking process in a semiconductor laser diode, multiple coherent carriers with large intervals can be generated, which are further combined to give a much broader OFC through the electro-optical modulation (EOM) technique. The corresponding theoretical analysis and simulation have been given in detail. In the experimental demonstration, an OFC with 9 comb lines can be generated on a single carrier by the cascaded MZMs with a multi-harmonic RF drive signal. After tripling the number of carriers, the number of the comb lines becomes 27. By properly adjusting the carrier’s interval and drive signal frequency, the generated OFC shows great flexibility on spacing and the number of comb lines, where a 27-line OFC with FSR of 5 GHz and 6.5 GHz have been demonstrated respectively. In addition, by increasing the number of RF sources, the OFC with up to 43 comb lines can be generated in this system. Compared with the traditional OFC generation implemented by the EOM technique on a single optical carrier, three times optical spectrum extension or the number of comb lines increasing can be achieved. The Multi-carrier broaden spectrum method retains all the advantages of EOM-based OFC generation and overcomes its disadvantages, such as limited spectrum width and the number of comb lines. It provides a new idea for broadband OFC generation.

Design of optical frequency comb based on dual frequency pumped normal dispersion silicon carbide microresonator

<sec>The scheme of generating optical frequency comb (OFC) mainly includes mode-locked laser, electro-optic modulation comb, and nonlinear Kerr micro-resonator comb. The OFC with frequency spacing on the order of 10–200 GHz can be employed in optical communication, microwave photonics, and other fields. Silicon carbide (SiC) has aroused the considerable research interest in integrated nonlinear photonics owing to its high second nonlinear coefficient and third order nonlinear coefficient, low optical loss, without multiphoton absorption loss owing to the wide bandgap. Single soliton microcomb in anomalous group velocity dispersion regime based on a 4H-SiC-on-insulator thin film has been demonstrated with the relative lower pump to comb efficiency, while the OFC in normal dispersion regime based on the SiC microresonator has not been reported. The pump conversion efficiency of OFC in the normal dispersion regime is high, and the pump frequency detuning range for the OFC generation is large, which is conducive to the OFC generation and long-term stable operation. Since there is no modulation instability effect in normal dispersion regime, the key to generating the OFC in normal dispersion regime is that the initial state needs the assistance of a multi-frequency laser (or four-wave mixing sideband). The phase-locked dual-frequency laser can be regarded as a pulse pump laser source with wide pulse duration, which can be realized by integrated distributed feedback laser.</sec><sec>In this paper, a scheme of generating OFC by pumping the normal dispersion SiC microresonator with phase locked dual-frequency laser is proposed. The flat normal dispersion in 1550 nm band is realized through dispersion engineering of the SiC microresonator. The effective mode field area of the TE<sub>0</sub> fundamental mode at 1550 nm in the optimized SiC ridge waveguide is about 0.94 μm<sup>2</sup>, and the nonlinear coefficient is about 3.69 <inline-formula><tex-math id="M2">\begin{document}$ {{\mathrm{W}}}^{-1}{\cdot} {{\mathrm{m}}}^{-1} $\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="3-20231442_M2.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="3-20231442_M2.png"/></alternatives></inline-formula>. Meanwhile, dispersion parameters of the microresonator with 100 GHz FSR are also obtained. The OFC generation pumped by a phase-locked dual-frequency laser based on normal dispersion SiC microresonator is simulated through using the Lugiato-Lefever equation. The evolution process of the OFC in time and frequency domain related to the pump detuning is studied. The effects of several parameters such as the pump power, microresonator waveguide loss, microresonator dispersion, proportion of the dual-frequency laser, and the frequency interval of dual-frequency laser on the performance of the OFC are also investigated. The conclusions can be obtained through the OFC generation simulation as follows, 1) When the microresonator waveguide loss is larger, the pump detuning range for the OFC generation becomes smaller, and the pulse peak power under the same pulse intensity filling rate decreases. 2) When the input pump power is larger, the pump detuning range for the OFC generation becomes larger, the pulse peak power under the same pulse intensity filling rate increases, and the corresponding spectrum becomes wider. 3) With the increase of absolute dispersion value, the spectrum bandwidth of the generated OFC decreases obviously. 4) The power proportion of dual-frequency laser has little influence on the OFC generation. 5) The frequency spacing of the generated OFC can be tuned through changing the frequency spacing of the two phase-locked lasers with integral multiple of free spectral range.</sec><sec>The OFC with spectrum bandwidth of about 70 nm can be generated in a range of 1500—1600 nm through the simulation. The simulation results are beneficial to promoting the research and practical application of high repetition rate broadband optical frequency comb in a 1550 nm band based on the normal dispersion silicon carbide microresonator.</sec>

O-U Band Flat Optical Frequency Comb Generation Based on Dispersion-controlled Fluorotellurite Glass Fiber

O-U Band Flat Optical Frequency Comb Generation Based on Dispersion-controlled Fluorotellurite Glass Fiber

Vliyanie nagreva na generatsiyu i svoystva platikonov v vysokodobrotnykh opticheskikh mikrorezonatorakh

Pumping a high-Q optical microresonator by an external laser is inevitably associated with thermal effects. They have a significant impact on the dynamics of nonlinear processes in such structures, including the generation of optical frequency combs and dissipative solitons. The generation process and the properties of bright solitons in such heated microresonators with anomalous group velocity dispersion (GVD) have been well studied, and a number of methods have been developed to minimize the effect of thermal processes. However, for dark solitons or platicons excited at normal GVD, these issues have been studied significantly less. In this work, the properties of platicons in heated microresonators are analyzed, and it is shown that in the case of “positive” thermal effects, when the direction of the thermal shift of the resonance frequencies of a microresonator coincides with the direction of the nonlinear shift, the widest high-energy platicons with the duration close to the round trip time in the resonator are stable. In the case of “negative” thermal effects, narrow low-energy platicons remain stable. Moreover, in microresonators with “negative” thermal effects, the interaction between cubic nonlinear and thermal processes can ensure the generation of platicons without special techniques required in other cases.

Optical frequency comb generation using cascaded injection of semiconductor lasers

We study optical frequency comb (OFC) generation using cascaded injection of semiconductor lasers in this work. The OFC generation system is operated in two cascaded optical injection stages. When a master laser optically injects into the first stage with proper injection power and frequency, period-one (P1) dynamics are invoked in an optically injected semiconductor laser of the first stage. Another semiconductor laser in the second stage is then optically injected by the P1 dynamics. With proper injection power adjusted in the second stage, the P1 dynamics are regenerated, and the semiconductor laser relaxation oscillations (ROs) become undamped so that subharmonic oscillations appear. Because a subharmonic oscillation frequency is half of an oscillation frequency of the P1 dynamics, extra optical frequency components appear in the middle of the adjacent optical frequency components of the P1 dynamics, thus signaling OFC generation. The OFC signals exhibit at least 15 comb lines, resulting in a bandwidth greater than 140 GHz. Microwave comb signals are obtained after photodetection, although the microwave linewidth is on the order of a few megahertz because of the semiconductor laser noise. Thus, we propose a cascaded injection-locking scheme to stabilize the P1 dynamics and OFC signals. We have demonstrated pure microwave generations with a linewidth of less than 3 Hz and low phase noise.