Generation Of Harmful By-products Research Articles

Molybdenum oxide nanotube caps decorated with ultrafine Ag nanoparticles: Synthesis and antimicrobial activity

In the contemporary era, microorganisms, spanning bacteria and viruses, are increasingly acknowledged as emerging contaminants in the environment, presenting significant risks to public health. Nevertheless, conventional methods for disinfecting these microorganisms are often ineffective. Additionally, they come with disadvantages such as high energy usage, negative environmental consequences, increased expenses, and the generation of harmful byproducts. The development of next-generation antifungal and antibacterial agents is dependent on newly synthesized nanomaterials with inherent antimicrobial behavior. In this study, we report an arc-discharge method to synthesize MoOx nanosheets and microbelts, followed by decorating them with ultrafine Ag nanoparticles (NPs). Scanning and transmission electron microscopies show that Ag NPs formation on the Molybdenum oxide nanostructures rolls them into nanotube caps (NTCs), revealing inner and outer diameters of approximately 19.8 nm and 105.5 nm, respectively. Additionally, the Ag NPs are ultrafine, with sizes in the range of 5–8 nm. Results show that the prepared NTCs exhibit dose-dependent sensitivity to both planktonic and biofilm cells of Escherichia coli and Candida albicans. The anti-biofilm activity in terms of biofilm inhibition ranged from 19.7 to 77.2% and 11.3–82.3%, while removal of more than 70% and 90% of preformed biofilms was achieved for E. coli and C. albicans, respectively, showing good potential for antimicrobial coating. Initial MoOx exhibits positive potential, while Ag-decorated Molybdenum oxide NTCs show dual potential effects (positive for Molybdenum oxide NTCs and negative for Ag NPs. Molybdenum oxide NTCs, with their strong positive potential, efficiently attract microbes due to their negatively charged cell surfaces, facilitating the antimicrobial effect of Ag NPs, leading to cell damage and death. These findings suggest that the synthesized NPs could serve as a suitable coating for biomedical applications.

Intensified fish farming. Performance of electrochemical remediation of marine RAS waters

Aquaculture has been the fastest growing agricultural sector in the past few decades and currently supplies about half of the fish market. A range of environmental and management concerns including limited land and water availability have led to intensifying fish production by recirculating aquaculture systems (RAS). Fish's diet contains 30–60 % protein and about 4–10 % nitrogen (N). As fish assimilate only 20–30 % of the feed to produce body mass, the unassimilated N is released in the form of toxic ammonium that deteriorates water quality and compels its degradation. Widely extended biological nitrification is not efficient in the removal of nitrites nor other chemicals and pharmaceuticals used during fish culture. Electrochemical oxidation, a less developed alternative, reports several advantages such as, i) simultaneous degradation of ammonia‑nitrogen (TAN) and water disinfection in the same step with considerable simplification of the whole process, ii) easy adaptability to different production scales and periods of fish growth, and iii) no generation of harmful by-products and no use of chemicals, among others. Besides, in the case of marine aquaculture, the technology benefits from the high conductivity of seawater; thus, electrochemical oxidation is positioned in a very good place to satisfy the water treatment needs of the increasing production rate of marine aquaculture fish. Here, we report the analysis of the performance of a RAS demonstration plant aimed at farming gilthead sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax) and provided with electrochemical remediation of culture water. The performance of the plant, with 20 m3 of seawater operating at a recirculation rate of 0.9–1.4 h−1, has been analysed in terms of TAN removal, water disinfection, make-up water intake and energy consumption and compared to data of conventional RAS provided with biofilters. The benefits and advantages of the innovative electrochemical remediation of RAS water are highlighted.

Efficient use of Ferrate(VI) in the remediation of aqueous solutions contaminated with potential micropollutants: Simultaneous removal of triclosan and amoxicillin

Ferrate(VI) is a safer oxidant compared to the often used oxidant in various wastewater treatment plants since the ferrate(VI) is devoid with the generation of harmful by-products. Hence, the present study is aimed to obtain laboratory experimental data for the treatment of water adulterated with emerging micro-pollutant (triclosan and amoxicillin) using the ferrate(VI). The parametric studies enabled us to deduce the kinetics of ferrate(VI) removal. The molar stoichiometry of ferrate(VI) and micro-pollutant was obtained as 2:1. Further, the mineralization of triclosan and amoxicillin is obtained which further enhances the applicability of ferrate(VI) in the waste water treatment. The simultaneous removal of these two pollutants (triclosan and amoxicillin) are extensively studied using the ferrate(VI). Moreover, the pH dependent degradation using ferrate(VI) is enabled to deduce the mechanism of removal. Additionally, the real matrix samples using the natural spring water (Tuikhur water) spiked with these micro-pollutants showed that the ferrate(VI) efficiency is almost unaffected at least in the removal of these two micro-pollutants. This showed the selectivity of the ferrate(VI) in the treatment process.

Ionic liquids, deep eutectic solvents and liquid polymers as green solvents in carbon capture technologies: a review

Global warming is a critical issue resulting partly from increasing carbon dioxide emissions. Technologies have been developed to capture carbon dioxide followed by storage or utilization, yet techniques are limited by the use of toxic solvents and the generation of harmful by-products. Research in green chemistry has designed green solvents which are non-toxic, efficient and environmentally friendly. Here we review green solvents employed for carbon capture, with emphasis on ionic liquids, deep eutectic solvents and liquid polymers. Solvent performance depends on temperature, density and viscosity. Deep eutectic solvents appear as the most advanced solvents with capacities reaching up to 4.292 g CO2 per g of solvent. Ionic liquids have shown CO2 uptakes of 4.72 mol of CO2/mol of solvent, but are less efficient on average. Liquid polymers display capacities of up to 1.357 mol of CO2/mol of solvent.

Green Synthesis of Silver Nanoparticles with Antimicrobial Properties Using Phyla dulcis Plant Extract.

Foodborne illnesses caused by the consumption of food contaminated with foodborne pathogens at infectious doses are becoming a common health issue throughout the world. Metal nanoparticles with potential antimicrobial properties are an area that can be explored to discover novel antimicrobial agents. The traditional synthesis methods of metal nanoparticles involve the use of toxic chemicals and the generation of harmful byproducts. In this study, a greener method to synthesize silver nanoparticles (AgNPs) with potential antimicrobial properties was investigated. The aqueous extract of the medicinal plant Phyla dulcis Trev. (verbenaceae) was used as the reducing and stabilizing agent to synthesize AgNPs using microwave irradiation. The formation of AgNPs was confirmed using ultraviolet-visible spectroscopy by the appearance of characteristic surface plasmon resonance peaks in the 430-440 nm wavelength range. The size and stability of the AgNPs were studied using Zetasizer nano-series for 5 weeks after synthesis. The average particle size remained between 63 and 76 nm during the first 4 weeks and increased to 114 nm in the fifth week showing possible aggregation after the fourth week. The zeta potential remained between -20 and -24 mV throughout the 5 weeks showing relatively good stability. Scanning electron microscopy/energy dispersive X-ray spectroscopy showed the association of phytoconstituents with the AgNPs. X-ray photoelectron spectroscopy analysis confirmed the formation of metallic nanoparticles starting from silver nitrate. Finally, the AgNPs were tested to be effective against Escherichia coli O157:H7 (ATCC 43888), Salmonella Typhimurium (novobiocin and nalidixic acid resistant strain), Listeria monocytogenes (4b; ATCC 19115), and Staphylococcus aureus (ATCC 6538) strains, which are known to be common foodborne pathogens.

Irrigation deficit turns almond by-products into a valuable source of antimicrobial (poly)phenols

Almond (Prunus dulcis (Mill.) D. A. Webb) production keeps an increasing trend worldwide, leading to augment in generation of harmful by-products that should be valorized as a source of bioactive phytochemicals with application in the development of new added-value products. The assessment of almond hulls and skins on their (poly)phenolic composition was developed upon two seasons, under five irrigation regimes, regarding total phenolics, flavonoids, and ortho-diphenols, as well as individual phenolic compounds analyzed by High-Performance Liquid Chromatography with Diode-Array Detection (HPLC-DAD). As functional tests, extracts were assessed on their radical scavenging activity in vitro and reducing power, and screened on their antimicrobial activity against multidrug resistant bacterial pathogens. The phenolic profile and antioxidant activities were evaluated in blanching water as well. Naringenin-7-O-glucoside and isorhamnetin-3-O-rutinoside were the most abundant phenolics in almond hulls and skins. Influence of irrigation treatments and season on phenolic content differed among by-products; hulls being more influenced by irrigation and skins by the agro-climatic conditions. The synthesis of individual phenolics was more influenced by season than treatment. According to the chemical and biological correlations, the presence of (poly)phenols seems to be responsible for the antioxidant and antimicrobial properties revealed. The knowledge generated upon the present work contributes to understand the variability of almond by-products composition attributable to seasonal and irrigation conditions, and to envisage valorization alternatives for these under explored residues and blanching water.

Cryogenic circulation for indoor air pollution control

Hazardous outdoor air pollution has severely affected indoor air quality, threatening the health of billions of people. However, existing indoor air purification technologies are unsatisfactory due to some inherent limitations such as poor efficiency, limited target pollutants, the need to frequently replace filters or adsorbents, or the generation of harmful by-products. Here, we studied the effect and mechanism of cryogenic circulation for indoor air purification. Experimental results show that up to 99% of indoor PM2.5 from ambient air was removed at −18 °C. The morphological measurements indicate that micrometer-sized particles are formed concomitantly with the reduction of nanometer- or submicron-sized particles, suggesting that condensational growth of fine particles is responsible for the removal. Applying the method to gaseous pollutant purification demonstrates that 98% of NO2 is condensed and removed from the ambient air at −50 °C, implying that the method would be effective for multiple indoor pollutants with higher boiling points. Cryogenic condensation may provide a principle for continuous indoor air purification via modified air conditioners and humidifiers in cases where health benefits outweigh energy consumption concerns.

Direct Electrolytic Reduction of Solid Ta2O5 to Ta with SOM Process

A process that uses the solid-oxide–oxygen-ion conducting membrane has been investigated to produce tantalum directly from solid Ta2O5 in molten CaCl2 or a molten mixture of 55.5MgF2-44.5CaF2 (in wt pct). The sintered porous Ta2O5 pellet was employed as the cathode, while the liquid copper alloy, saturated with graphite powder and encased in a one-end-closed yttria-stabilized-zirconia (YSZ) tube, acted as the anode. The electrolysis potential in this method is higher than that of the Fray–Farthing–Chen Cambridge process because the YSZ membrane tube blocks the melts to electrolyze, and only Ta2O5 is will be electrolyzed. The microstructures of reduced pellets and a cyclic voltammogram of solid Ta2O5 in molten CaCl2 were analyzed. In addition, the influence of particle size and porosity of the cathode pellets on metal-oxide-electrolyte, three-phase interlines was also discussed. The results demonstrate that the sintering temperature of cathode pellets and electrolytic temperature play important roles in the electrochemical process. Furthermore, this process can be used to produce Ta metal efficiently without the expensive cost of pre-electrolysis and generation of harmful by-products.

Direct Preparation of Tantalum Metal from Ta<sub>2</sub>O<sub>5</sub>

A novel process of solid-oxide-oxygen-ion conducting membrane (SOM) technique has been investigated to produce Ta metal directly from solid Ta2O5 in mixture molten of 55.5MgF2-44.5CaF2 (in wt%). The sintered porous Ta2O5 pellet was employed as the cathode while liquid copper, saturated with graphite powder and encased in a one-end-closed yttria-stabilized-zirconia (YSZ) tube, acted as the anode. An electrolysis potential higher than that in Fray–Farthing–Chen (FFC) Cambridge process could be applied to this process because YSZ membrane blocked the electrolysis of the melts and there was no need for flux to dissolve Ta2O5. The results demonstrated that the electrolytic temperature have played important roles in this electrochemical process. Furthermore, this process can be used to efficiently produce Ta metal without the expensive pre-electrolysis and generation of harmful byproducts.

Determination and risk assessment of by-products resulting from photocatalytic oxidation of toluene

The generation of harmful by-products during photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a bottleneck problem for the application of PCO technology in indoor environment. Toluene is a typical VOC found in indoor air. In this work, the by-products at ppb level were studied during PCO decomposition of toluene in a plate-type reactor and identified using PTR-MS (proton transfer reaction-mass spectrometry) and GC–MS (gas chromatography–mass spectroscopy). The results indicated that benzaldehyde, methanol, acetaldehyde, acetone/propionaldehyde, formic acid/ethanol and acetic acid were the main by-products in the gas phase. By adjusting the concentration of water vapor, some compounds adsorbed on the TiO2 surface were ascertained, which resulted in the deactivation of TiO2. They were benzoic acid, benzene, acrylaldehyde, butyraldehyde and pentanal. Some of these by-products have not been reported in the literature. Possible photocatalytic oxidation pathways of toluene were proposed. A health-related index (HRI) was introduced to assess the risk level to human health of these ppb-level by-products. It concludes that although some undesired by-products (even carcinogenic) are generated during PCO decomposition of toluene, it seems that these by-products do not have negative effects to human health because of their low concentrations.

Solid Oxide Membrane (SOM) technology for environmentally sound production of tantalum metal and alloys from their oxide sources

The Solid‐Oxide‐Oxygen‐Ion conducting membrane (SOM) technology offers great potential for environment friendly and energy‐efficient extraction of high‐energy‐content metals. This work was performed to demonstrate the technical viability of the SOM technology to produce tantalum metal and tantalum–niobium alloy directly from tantalum oxide and ore concentrates. An electric potential is applied to dissociate the tantalum oxide source, reduce the Ta metal at the cathode, pump the oxygen ions through the membrane (SOM), and oxidize them at the anode. The process can be used to efficiently produce tantalum metal without the expensive pre‐processing of raw materials and generation of harmful byproducts. The work reported in this paper demonstrates that the SOM process can produce high‐purity tantalum metal. The electrochemical behavior of the cell and the method to increase membrane stability are also discussed.