Generation Of Radical Cations Research Articles

Redox-Inducible Radiomimetic Photosensitizers Selectively Suppress Cancer Cell Proliferation by Damaging DNA through Radical Cation Chemistry.

Radiotherapy leverages ionizing radiation to kill cancer cells through direct and indirect effects, and direct effects are considered to play an equal or greater role. Several photosensitizers have been developed to mimic the direct effects of radiotherapy, generating radical cations in DNA models, but none has been applied in cellular studies. Here, we design a radiomimetic photosensitizer, producing DNA radical cations in cells for the first time. To reduce adverse effects, several redox-inducible precursors are prepared as cancer cells have elevated levels of GSH and H2O2. These precursors respond to GSH or H2O2, releasing the active photosensitizer that captures DNA abasic (AP) sites and generates DNA radical cations upon photolysis, without disrupting the redox state of cells. DNA radical cations migrate freely and are eventually trapped by H2O and O2 to yield DNA lesions, thus triggering DNA damage response. Our study suggests that direct effects of radiotherapy suppress cancer cell proliferation mainly by inducing G2/M phase cell cycle arrest, rather than promoting apoptosis. Synergistic effects of the precursor and chemotherapeutic agents are also observed in combination phototherapy. Beyond highlighting an alternative strategy for phototherapy, this proof-of-concept study affords a facile cellular platform to study the direct effects of radiotherapy.

Redox‐Inducible Radiomimetic Photosensitizers Selectively Suppress Cancer Cell Proliferation by Damaging DNA through Radical Cation Chemistry

AbstractRadiotherapy leverages ionizing radiation to kill cancer cells through direct and indirect effects, and direct effects are considered to play an equal or greater role. Several photosensitizers have been developed to mimic the direct effects of radiotherapy, generating radical cations in DNA models, but none has been applied in cellular studies. Here, we design a radiomimetic photosensitizer, producing DNA radical cations in cells for the first time. To reduce adverse effects, several redox‐inducible precursors are prepared as cancer cells have elevated levels of GSH and H2O2. These precursors respond to GSH or H2O2, releasing the active photosensitizer that captures DNA abasic (AP) sites and generates DNA radical cations upon photolysis, without disrupting the redox state of cells. DNA radical cations migrate freely and are eventually trapped by H2O and O2 to yield DNA lesions, thus triggering DNA damage response. Our study suggests that direct effects of radiotherapy suppress cancer cell proliferation mainly by inducing G2/M phase cell cycle arrest, rather than promoting apoptosis. Synergistic effects of the precursor and chemotherapeutic agents are also observed in combination phototherapy. Beyond highlighting an alternative strategy for phototherapy, this proof‐of‐concept study affords a facile cellular platform to study the direct effects of radiotherapy.

Generation of alkene radical cation for thioxanthone-TfOH complex-catalyzed intramolecular cyclization using a photoredox catalysis strategy

Photo catalysis has comprehensively become a powerful tool in organic synthesis, and organic molecules are thriving as catalyst. The thioxanthone-TfOH complex (9-HTXTF) as photoredox catalyst with high oxidative capacity can be applied in single electron reduction of alkene affording alkene radical anion as a key intermediate. To transform this intermediate from radical anion to radical cation, a well-designed strategy is proposed with N-arylacrylamides as substrate. Based on its single electron transfer (SET) with 9-HTXTF*, N-radical cation is generated and then transformed to alkene radical cation by intramolecular conjugated system. By using this photoredox catalysis strategy, we developed a 9-HTXTF-catalyzed photochemical cyclization of alkenes, which further expands the applications of this catalyst. The entire cyclization is metal-free and without sacrificing agents, which conforms to atom economy and environmental friendliness.

Intense annihilation electrogenerated chemiluminescence from tris(2-phenylpyridinato)iridium(III) with organic radical cations and anions

The electrogenerated chemiluminescence (ECL) of 0.2 mM tris(2-phenylpyridinato)iridium(III) (Ir(ppy)3) in acetonitrile with a potential step method was dramatically enhanced by the electrochemically generated radical cation of 10-methylphenothiazine (MePT), thianthrene (TH), and dibenzo-1,4-dioxin (DD) or the radical anion of benzophenone (BP) and benzonitrile (BN). In the case of using the radical cation of phenothiazine (PT), no ECL was seen. Among the binary systems containing 0.2 mM Ir(ppy)3 and 10 mM parent molecule of the radical ions, intense annihilation ECL of Ir(ppy)3 was observed from a solution containing BN; the ECL intensity was about 250 times greater than that of the single system of 0.2 mM Ir(ppy)3. Among the cases using the radical cations, the ECL intensity with TH was the largest (about 90 times higher than that of the single system). The mechanism for enhancing the ECL is discussed based on the redox potential, energy level of the lowest triplet excited (T1) state, and electron-donating and −accepting characteristics. The electron transfer reaction between the reduced form of Ir(ppy)3 (Ir(ppy)3•−) and the radical cations can produce the T1 state of Ir(ppy)3 (3Ir(ppy)3*) and that of MePT, TH, and DD, whereas the electron transfer reaction between the oxidized form of Ir(ppy)3 (Ir(ppy)3•+) and the radical anions can produce 3Ir(ppy)3* but not the T1 state of BN or BP. The lower ECL intensity using the radical cations relative to that of using BN suggests that the triplet energy transfer from the parent molecule of the radical cations to Ir(ppy)3 is not efficient. It is also shown that the homogeneous electron transfer reaction between Ir(ppy)3 and the electrochemically generated radical cation of TH and radical anion of BN to produce Ir(ppy)3•+ and Ir(ppy)3•−, respectively, which facilitates an ion annihilation reaction between Ir(ppy)3•− and Ir(ppy)3•+, is also responsible for the intense ECL.

Visible-Light-Triggered Difluoroacetylation/Cyclization of Chromone-Tethered Alkenes Enabling Synthesis of Tetrahydroxanthones.

Hydroxanthones have attracted considerable attention due to their significance in organic and biological chemistry, yet their synthesis remains a great challenge. In this study, a series of chromone-tethered alkenes are designed, and a radical cyclization reaction of these chromone derivatives has been achieved under photoredox conditions. The reaction uses bromodifluoroacetamides or bromodifluoroacetates as coupling partners, affording a broad range of functionalized tetrahydroxanthone products with up to 85% yields. The reaction is triggered via the generation of difluoroacetate radicals or alkene radical cations with fac-Ir(ppy)3 or 2,3,5,6-tetrakis(carbazol-9-yl)-1,4-dicyanobenzene as a photocatalyst. This approach offers access to various tetrahydroxanthone derivatives from readily available starting materials and enriches the research content of heteroarene-tethered alkenes.

Synthesis of Phenol-Pyridinium Salts Enabled by Tandem Electron Donor-Acceptor Complexation and Iridium Photocatalysis.

Herein, we describe a dual photocatalytic system to synthesize phenol-pyridinium salts using visible light. Utilizing both electron donor-acceptor (EDA) complex and iridium(III) photocatalytic cycles, the C-N cross-coupling of unprotected phenols and pyridines proceeds in the presence of oxygen to furnish pyridinium salts. Photocatalytic generation of phenoxyl radical cations also enabled a nucleophilic aromatic substitution (SNAr) of a fluorophenol with an electron-poor pyridine. Spectroscopic experiments were conducted to probe the mechanism and reaction selectivity. The unique reactivity of these phenol-pyridinium salts were displayed in several derivatization reactions, providing rapid access to a diverse chemical space.

Ag3PO4 enables the generation of long-lived radical cations for visible light-driven [2 + 2] and [4 + 2] pericyclic reactions

Photocatalytic redox reactions are important for synthesizing fine chemicals from olefins, but the limited lifetime of radical cation intermediates severely restricts semiconductor photocatalysis efficiency. Here, we report that Ag3PO4 can efficiently catalyze intramolecular and intermolecular [2 + 2] and Diels-Alder cycloadditions under visible-light irradiation. The approach is additive-free, catalyst-recyclable. Mechanistic studies indicate that visible-light irradiation on Ag3PO4 generates holes with high oxidation power, which oxidize aromatic alkene adsorbates into radical cations. In photoreduced Ag3PO4, the conduction band electron (eCB−) has low reduction power due to the delocalization among the Ag+-lattices, while the particle surfaces have a strong electrostatic interaction with the radical cations, which considerably stabilize the radical cations against recombination with eCB−. The radical cation on the particle’s surfaces has a lifetime of more than 2 ms, 75 times longer than homogeneous systems. Our findings highlight the effectiveness of inorganic semiconductors for challenging radical cation-mediated synthesis driven by sunlight.

Electrochemical Arene Radical Cation Promoted Spirocyclization of Biaryl Ynones: Access to Alkoxylated Spiro[5,5]trienones.

Herein, a novel electrochemical arene radical cation promoted dearomative spirocyclization of biaryl ynones with alcohols is described, providing a conceptually novel transformation mode for producing diverse alkoxylated spiro[5,5]trienones. The catalyst- and chemical-oxidant-free spirocyclization protocol features broad substrate scope and high functional group tolerance. Mechanistic studies reveal that the generation of arene radical cation via anodic single-electron oxidation is crucial, with sequential 6-endo-dig cyclization, dissociation of hemiketal, anodic oxidation, and nucleophilic attack of alcohols.

Role of non-covalent interactions in 2,5-di-Me-pyrazine-di-N-oxide - tertiary butyl alcohol - single-walled and multi-walled carbon nanotubes electrocatalytic systems

Oxidation of tert-butyl alcohol (tert-BuOH, Me3COH), a compound with a high C-H bond breaking energy in the absence of precious metals or their oxides as catalysts and using metal-free electrodes, is an inexpensive process and is of interest for practical applications in electrocatalysis and sensors. In this work, electrocatalytic systems 2,5-di-Me-pyrazine-di-N-oxide (Pyr1) - tert-BuOH – single - walled (SWCNT) and multi-walled (MWCNT) carbon nanotube paper electrodes in 0.1 M Bu4NClO4 solution in acetonitrile (MeCN) were studied by the methods of cyclic voltammetry, quantum chemical modeling and electron paramagnetic resonance (EPR) electrolysis. Calculaition of energies of non-covalent interactions between the components of the electrocatalytic system in complexes Me3COH*Me3COH, Me3COH*MeCN, Pyr1*Me3COH and the adsorption energy of Me3COH and complexes of Pyr1*Bu4NClO4, Pyr1*Me3COH, Pyr1*MeCN and Me3COH *Bu4NClO4 on CNTs surface using a cluster model describing the surface of conducting carbon nanotubes (10, 10) was performed. The study made it possible to reveal the regularities characteristic of aromatic-di-N-oxide – CNT electrocatalytic systems and to propose a mechanism of tert-BuOH oxidation in the presence of electrochemically generated radical cation Pyr1. The data will be useful at using CNT electrodes in electrocatalytic processes, as well as aromatic di-N-oxide-CNT catalytic systems in electrocatalysis and sensors.

Photoinduced One‐Electron Oxidation of Estrone Derivatives: A Combined Steady‐State and Time‐Resolved Spectroscopy Investigation

AbstractA detailed investigation of the photophysics and of the redox properties of a set of selected estrone carboxylate and sulfonate esters was carried out by means of steady‐state and time‐resolved spectroscopies. The observed dual fluorescence was assigned to an efficient intramolecular energy transfer from the aromatic moiety to the carbonyl group. On the other hand, the photoinduced monoelectronic oxidation of R−OX in the presence of persulphate anion is followed by mesolytic fragmentation of the so generated radical cation into the corresponding phenoxyl radical with rate constant values (kfrag) of 104–105 s−1, that depend on the X−O bond dissociation energy values.

Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films.

The introduction of novel materials with multifunctional chromogenic properties, such as electrochromic/electrofluorochromic (EC/EFC) properties, has recently attracted prospective interest in the development of various optoelectronic devices and smart windows. In this study, a novel Zn(II)-based metallo-supramolecular polymer (polyZn) has been developed as an ON/OFF switchable EFC application with prominent EC behavior. In this regard, the polymeric chain of polyZn was first synthesized by 1:1 complexation in a zigzag manner with Zn(II) ions at the metal center and 4,4'-[bis(2,2':6',2″-terpyridinyl)benzene]triphenylamine (LTPY-TPA) as the redox-active ditopic ligand. The polyZn exhibits excellent solubility in organic solvents and can form a very good uniform thin film on an indium tin oxide/glass substrate by spin-coating. In a neutral state, transparent polyZn exhibits a bright yellow color to the naked eye (absorption at ∼325 nm). The electroactive triphenylamine (TPA) core of LTPA-TPY, however, undergoes reversible single-electron oxidation when a positive bias of +1.6 V vs Ag/Ag+ is applied, generating radical cations (TPA ↔ TPA•+) with a significant drop in transparency (77%). A noticeable chromic shift in the hue of the film from brilliant yellow to green was observed with the appearance of a near-infrared absorption band at ∼897 nm with a tail of 1300-1600 nm. Interestingly, in addition to this EC phenomenon, the fabricated solid-state polyZn film exhibits intense, high-contrast reddish-orange photoluminescence with λem = 650 nm, which is significantly desired as a molecular probe for bioimaging. Both the TPA core and the redox-inactive Zn(II)-terpyridine core emit orange-red photoluminescence in polyZn, which is significantly quenched upon the oxidation of the film and is re-emitted at 0.0 V vs Ag/Ag+. This ON/OFF EFC transition was sustained for several cycles. This study should motivate to design and create distinctive new unique materials with combined EC/EFC behavior for the fabrication of optoelectronic devices by combining a metal-fluorescent core with a redox-active spacer.

Achieving short-wavelength free radical emission by combining small conjugated structure and anti-Kasha emission

Since the natural narrow bandgaps of free radicals usually lead to emission in the long-wavelength region, it is still of great challenge to design radical luminescent materials with stable and short-wavelength emission in the ambient environment. In this work, a series of dicarbonyl-substituted organic molecules with small conjugated structures were used to form free radicals with short-wavelength radical emission. These low-conjugated molecules with only one benzene ring showed stable photoinduced free radical emission after doping with polymethyl methacrylate (PMMA) because the rigid polymer environment could help stabilize the free radicals and limit the non-radiative energy transfer. Moreover, PMMA with electron-withdrawing groups could promote the generation of carbonyl radical cations. The theoretical calculation suggests that the free radical with anti-Kasha emission derived from high energy excited state (D4 or D5) would directly relax to the ground state, combining with the small spin delocalization of the low conjugation free radical, leading to short-wavelength emission. More importantly, such free radical emissions could also respond to external stimulation such as light irradiation or heat treatment. These materials show great potential in lithography information recording and information encryption. This design strategy provides new insights into molecular and functional diversity of free radical materials.

Detailed Comparison of Xenon APPI (9.6/8.4 eV), Krypton APPI (10.6/10.0 eV), APCI, and APLI (266 nm) for Gas Chromatography High Resolution Mass Spectrometry of Standards and Complex Mixtures.

Photoionization schemes for mass spectrometry, either by laser or discharge lamps, have been widely examined and deployed. In this work, the ionization characteristics of a xenon discharge lamp (Xe-APPI, 9.6/8.4 eV) have been studied and compared to established ionization schemes, such as atmospheric pressure chemical ionization, atmospheric pressure photoionization with a krypton discharge lamp (Kr-APPI, 10.6/10 eV) and atmospheric pressure laser ionization (266 nm). Addressing the gas-phase ionization behavior has been realized by gas chromatography coupled to high-resolution mass spectrometry without the usage of a dopant. For standard substances, it has been found that Xe-APPI is able to ionize a broad range of polycyclic aromatic hydrocarbons as well as their heteroatom-containing and alkylated derivatives. However, thiol and ester compounds could not be detected. Moreover, Xe-APPI revealed a high tendency to generate oxygenated artifacts, most likely due to a VUV absorption band of oxygen at 148 nm. Beneficially, almost no chemical background, commonly caused by APCI or Kr-APPI due to column blood, plasticizers or impurities, is observed. This advantage is noteworthy for evolved gas analysis without preseparation or for chromatographic coelution. For the complex mixtures, Xe-APPI revealed the predominant generation of radical cations via direct photoionization with a high selectivity toward aromatic core structures with low alkylation. Interestingly, both Xe-APPI and Kr-APPI could sensitively detect sterane cycloalkanes, validated by gas chromatographic retention. The narrowly ionized chemical space could let Xe-APPI find niche applications, e.g., for strongly contaminated samples to reduce the background.

Syntheses and Electrochemical and EPR Studies of Porphyrins Functionalized with Bulky Aromatic Amine Donors.

A series of nickel(II) porphyrins bearing one or two bulky nitrogen donors at the meso positions were prepared by using Ullmann methodology or more classical Buchwald-Hartwig amination reactions to create the new C-N bonds. For several new compounds, single crystals were obtained, and the X-ray structures were solved. The electrochemical data of these compounds are reported. For a few representative examples, spectroelectrochemical measurements were used to clarify the electron exchange process. In addition, a detailed electron paramagnetic resonance (EPR) study was performed to estimate the extent of delocalization of the generated radical cations. In particular, electron nuclear double resonance spectroscopy (ENDOR) was used to determine the coupling constants. DFT calculations were conducted to corroborate the EPR spectroscopic data.

Olefination of carbonyls with alkenes enabled by electrophotocatalytic generation of distonic radical cations.

The conversion of carbonyls to olefins is a transformation of great importance for complex molecule synthesis. Standard methods use stoichiometric reagents that have poor atom economy and require strongly basic conditions, which limit their functional group compatibility. An ideal solution would be to catalytically olefinate carbonyls under nonbasic conditions using simple and widely available alkenes, yet no such broadly applicable reaction is known. Here, we demonstrate a tandem electrochemical/electrophotocatalytic reaction to olefinate aldehydes and ketones with a broad range of unactivated alkenes. This method involves the oxidation-induced denitrogenation of cyclic diazenes to form 1,3-distonic radical cations that rearrange to yield the olefin products. This olefination reaction is enabled by an electrophotocatalyst that inhibits back-electron transfer to the radical cation intermediate, thus allowing for the selective formation of olefin products. The method is compatible with a wide range of aldehydes, ketones, and alkene partners.

Electrochemically Triggered Hole-Catalytic Benzylic Substitution Reaction at a Polymer Chain Containing β-O-4 Linkage

Abstract Organic electrosynthesis enables clean, sustainable, and unique molecular transformations; however, its application to polymeric materials is restricted by their sterically demanding nature, which hinders quantitative electron transfer at the electrode surface. Herein, we report, for the first time, a hole-catalytic reaction triggered via anodic oxidation as a key strategy for achieving a high degree of electrochemical transformation in polymeric materials. Careful molecular and reaction design enabled hole-catalytic benzylic substitution, with an 88% degree of substitution, in a sterically hindered polymer, via an electrolytically generated radical cation. Mechanistic studies revealed that through-space delocalization of holes between neighboring aromatic systems contributes significantly to the stabilization of the radical cation species and intra-chain hole transfer. Thus, this study establishes hole catalysis as an effective strategy for the electrochemical transformation of polymers, which may aid the design of sustainable electrosynthetic strategies for functional macromolecules.

In Situ Generation of Red-to-NIR Emissive Radical Cations in the Stomach for Gastrointestinal Imaging.

Red-to-near-infrared (NIR) fluorescent probes, with advantages such as high spatiotemporal resolution and in situ sensing abilities,are highly attractive for diagnosis of gastrointestinal diseases and targeted drug development. However, conventional red-to-NIR fluorophores with electron closed-shell structures require tedious synthetic procedures for preparation, and it is difficult to further decorate them with sensing groups. In this study, a series of easily prepared pyrroles with simple structures that can quickly be transformed into red-to-NIR emissive radical cations in acidic buffer solution and in vivo stomachs is developed. The in-situ-generated red-to-NIR emissive pyrrole radical cations in the stomach have excellent biocompatibility and stability and can be used not only for intravital gastrointestinal imaging with high spatiotemporal resolution, but also for dynamic monitoring of the gastric emptying process and assessment of anti-gastric-acid therapy. The acidity-induced generation of pyrrole radical cations is believed to provide a facile strategy for developing red-to-NIR fluorophores and studying gastrointestinal diseases.

Regio-, Site-, and Stereoselective Three-Component Aminofluorination of 1,3-Dienes via Cooperative Silver Salt and Copper Catalysis

The intermolecular fluorodifunctionalization of 1,3-dienes offers straightforward access to highly functionalized allylic fluorides but suffers from low selectivities and limited substrate scope. Herein, we report the development of a cooperative silver salt and copper catalysis platform that enables an intermolecular three-component 1,2-aminofluorination of 1,3-dienes with N-bromodialkylamines and AgF. This protocol exhibits a broad substrate scope for both alkyl- and aryl-1,3-dienes with diverse functionalities, furnishing the allylic fluorides bearing homoallylic tertiary alkylamine moieties with high regio-, site-, and stereoselectivities. Moreover, the reactions of E/Z-mixed 1,3-dienes are allowed for the preparation of single E-products. Further mechanistic studies reveal a reaction sequence involving aminium radical cation (ARC) generation, aziridinium formation, and nucleophilic fluorination and highlight the pivotal role of the cooperative silver and copper complexes that enable the proceeding of aminofluorination reactions with good efficiencies and high selectivities.

Photocatalytic C−H Amination of Electron‐rich Aromatic Hydrocarbons by Carbon Nitride Photocatalysis

AbstractConstruction of C−N bond is a central process in organic synthesis. Typically, it relies on noble‐metal catalysts and prefunctionalized substrates, such as aryl halides. Alternative and more appealing method is a direct C−H amination of hydrocarbons that is based on intrinsic reactivity of the in situ generated radical cations, which are more electrophilic compared to their closed‐shell precursors. In this work, we employ potassium poly(heptazine imide) (K‐PHI), a graphitic carbon nitride semiconductor, to enable C−H amination of electron rich aromatic hydrocarbons with NH3 and pyrazole under oxidative conditions. Screening of oxidants, indicate those molecules that are able to accept not only electrons, but also protons, such as O2, PhNO2 and Ph2S2, mediate the reaction. As such, multisite proton‐coupled electron transfer (MS‐PCET) from the photocharged state of K‐PHI to the acceptor of electrons and protons is the key element in the studied photocatalytic process.

Anodic Cross-Coupling of Biomass Platform Chemicals to Sustainable Biojet Fuel Precursors

Electrocatalytic conversion of biomass platform chemicals to jet fuel precursors is a promising approach to alleviate the energy crisis caused by the excessive exploitation and consumption of non-renewable fossil fuels. However, an aqueous electrolyte has been rarely studied. In this study, we demonstrate an anodic electrocatalysis route for producing jet fuel precursors from biomass platform chemicals on Ni-based electrocatalysts in an aqueous electrolyte at room temperature and atmosphere pressure. The desired product exhibited high selectivity for the jet fuel precursor (95.4%) and an excellent coulombic efficiency of 210%. A series of in situ characterizations demonstrated that Ni2+ species were the active sites for the coupling process. In addition, the coupling reaction could be achieved by generating radical cations and inhibiting the side reaction. First, the electrochemical process could activate the furfural (FF) molecule and generate radical cations, resulting in an average of 2.0 times chain propagation. The levulinic acid (LA) molecules played a vital role in the coupling reaction. The adsorption strength of LA on Ni3N was higher than that of FF, which could inhibit the side reaction (the oxidation of FF) and achieve high selectivity. Meanwhile, the LA molecules were adsorbed on the Ni3N surface and then disrupted the formation of Ni3+ species, thus favoring the coupling reaction. This work demonstrates an efficient route to produce jet fuel precursors directly from biomass platform chemicals and provides a comprehensive understanding of the anodic coupling process.