Generalized Langevin Equation Thermostat Research Articles

A Gauss-Newton method for iterative optimization of memory kernels for generalized Langevin thermostats in coarse-grained molecular dynamics simulations.

In molecular dynamics simulations, dynamically consistent coarse-grained (CG) models commonly use stochastic thermostats to model friction and fluctuations that are lost in a CG description. While Markovian, i.e., time-local, formulations of such thermostats allow for an accurate representation of diffusivities/long-time dynamics, a correct description of the dynamics on all time scales generally requires non-Markovian, i.e., non-time-local, thermostats. These thermostats typically take the form of a Generalized Langevin Equation (GLE) determined by a memory kernel. In this work, we use a Markovian embedded formulation of a position-independent GLE thermostat acting independently on each CG degree of freedom. Extracting the memory kernel of this CG model from atomistic reference data requires several approximations. Therefore, this task is best understood as an inverse problem. While our recently proposed approximate Newton scheme allows for the iterative optimization of memory kernels (IOMK), Markovian embedding remained potentially error-prone and computationally expensive. In this work, we present an IOMK-Gauss-Newton scheme (IOMK-GN) based on IOMK that allows for the direct parameterization of a Markovian embedded model.

Inexpensive modeling of quantum dynamics using path integral generalized Langevin equation thermostats

The properties of molecules and materials containing light nuclei are affected by their quantum mechanical nature. Accurate modeling of these quantum nuclear effects requires computationally demanding path integral techniques. Considerable success has been achieved in reducing the cost of such simulations by using generalized Langevin dynamics to induce frequency-dependent fluctuations. Path integral generalized Langevin equation methods, however, have this far been limited to the study of static, thermodynamic properties due to the large perturbation to the system's dynamics induced by the aggressive thermostatting. Here, we introduce a post-processing scheme, based on analytical estimates of the dynamical perturbation induced by the generalized Langevin dynamics, which makes it possible to recover meaningful time correlation properties from a thermostatted trajectory. We show that this approach yields spectroscopic observables for model and realistic systems that have an accuracy comparable to much more demanding approximate quantum dynamics techniques based on full path integral simulations.

Classical, Thermostated Ring Polymer, and Quantum VSCF/VCI Calculations of IR Spectra of H7O3+ and H9O4+ (Eigen) and Comparison with Experiment.

We report vibrational IR spectra of the protonated water clusters H7O3+ and H9O4+ (Eigen) in the range from 0 to 4000 cm-1, from classical molecular dynamics (MD) and thermostated ring polymer molecular dynamics (TRPMD) calculations, using recent high-level ab initio potential and dipole moments surfaces. The MD spectra are done at 20 and 100 K, whereas the computationally intensive TRPMD spectra are done at 100 K. These spectra are compared with previous quantum vibrational self-consistent field/virtual state configuration interaction (VSCF/VCI) and quasi-classical MD calculations, using the same potential and dipole moment surfaces, and with experimental spectra for cold (∼20 K) clusters. As expected, the 20 K MD spectra have vibrational bands close to the harmonic ones, and at 100 K some downshifting of the bands is seen along with significant broadening. The TRPMD calculations, using two different thermostats (path integral Langevin equation and generalized Langevin Equation thermostat), show substantial downshifting relative to the classical spectrum at 100 K, especially for the intense proton-stretch bands. However, the downshifting is not sufficient to produce quantitative agreement with the VSCF/VCI (and experimental) band positions. An analysis of these positions is given based on a previously reported linear correlation between the hydronium O-H bond length and the harmonic frequency.

Converged Colored Noise Path Integral Molecular Dynamics Study of the Zundel Cation Down to Ultralow Temperatures at Coupled Cluster Accuracy.

For a long time, performing converged path integral simulations at ultralow but finite temperatures of a few Kelvin has been a nearly impossible task. However, recent developments in advanced colored noise thermostatting schemes for path integral simulations, namely, the Path Integral Generalized Langevin Equation Thermostat (PIGLET) and the Path Integral Quantum Thermal Bath (PIQTB), have been able to greatly reduce the computational cost of these simulations, thus making the ultralow temperature regime accessible in practice. In this work, we investigate the influence of these two thermostatting schemes on the description of hydrogen-bonded systems at temperatures down to a few Kelvin as encountered, for example, in helium nanodroplet isolation or tagging photodissociation spectroscopy experiments. For this purpose, we analyze the prototypical hydrogen bond in the Zundel cation (H5O2+) as a function of both oxygen-oxygen distance and temperature in order to elucidate how the anisotropic quantum delocalization and, thus, the shape of the shared proton adapts depending on the donor-acceptor distance. The underlying electronic structure of the Zundel cation is described in terms of Behler's Neural Network Potentials of essentially converged Coupled Cluster accuracy, CCSD(T*)-F12a/AVTZ. In addition, the performances of the PIQTB and PIGLET methods for energetic, structural, and quantum delocalization properties are assessed and directly compared. Overall, our results emphasize the validity and practical usefulness of these two modern thermostatting approaches for path integral simulations of hydrogen-bonded systems even at ultralow temperatures.

Accelerated path integral methods for atomistic simulations at ultra-low temperatures.

Path integral methods provide a rigorous and systematically convergent framework to include the quantum mechanical nature of atomic nuclei in the evaluation of the equilibrium properties of molecules, liquids, or solids at finite temperature. Such nuclear quantum effects are often significant for light nuclei already at room temperature, but become crucial at cryogenic temperatures such as those provided by superfluid helium as a solvent. Unfortunately, the cost of converged path integral simulations increases significantly upon lowering the temperature so that the computational burden of simulating matter at the typical superfluid helium temperatures becomes prohibitive. Here we investigate how accelerated path integral techniques based on colored noise generalized Langevin equations, in particular the so-called path integral generalized Langevin equation thermostat (PIGLET) variant, perform in this extreme quantum regime using as an example the quasi-rigid methane molecule and its highly fluxional protonated cousin, CH5 (+). We show that the PIGLET technique gives a speedup of two orders of magnitude in the evaluation of structural observables and quantum kinetic energy at ultralow temperatures. Moreover, we computed the spatial spread of the quantum nuclei in CH4 to illustrate the limits of using such colored noise thermostats close to the many body quantum ground state.

Accurate molecular dynamics and nuclear quantum effects at low cost by multiple steps in real and imaginary time: Using density functional theory to accelerate wavefunction methods.

The development and implementation of increasingly accurate methods for electronic structure calculations mean that, for many atomistic simulation problems, treating light nuclei as classical particles is now one of the most serious approximations. Even though recent developments have significantly reduced the overhead for modeling the quantum nature of the nuclei, the cost is still prohibitive when combined with advanced electronic structure methods. Here we present how multiple time step integrators can be combined with ring-polymer contraction techniques (effectively, multiple time stepping in imaginary time) to reduce virtually to zero the overhead of modelling nuclear quantum effects, while describing inter-atomic forces at high levels of electronic structure theory. This is demonstrated for a combination of MP2 and semi-local DFT applied to the Zundel cation. The approach can be seamlessly combined with other methods to reduce the computational cost of path integral calculations, such as high-order factorizations of the Boltzmann operator or generalized Langevin equation thermostats.

The effect of molecular dynamics sampling on the calculated observable gas-phase structures.

In this study, we compare the performance of various ab initio molecular dynamics (MD) sampling methods for the calculation of the observable vibrationally-averaged gas-phase structures of benzene, naphthalene and anthracene molecules. Nose-Hoover (NH), canonical and quantum generalized-Langevin-equation (GLE) thermostats as well as the a posteriori quantum correction to the classical trajectories have been tested and compared to the accurate path-integral molecular dynamics (PIMD), static anharmonic vibrational calculations as well as to the experimental gas electron diffraction data. Classical sampling methods neglecting quantum effects (NH and canonical GLE thermostats) dramatically underestimate vibrational amplitudes for the bonded atom pairs, both C-H and C-C, the resulting radial distribution functions exhibit nonphysically narrow peaks. This deficiency is almost completely removed by taking the quantum effects on the nuclei into account. The quantum GLE thermostat and a posteriori correction to the canonical GLE and NH thermostatted trajectories capture most vibrational quantum effects and closely reproduce computationally expensive PIMD and experimental radial distribution functions. These methods are both computationally feasible and accurate and are therefore recommended for calculations of the observable gas-phase structures. A good performance of the quantum GLE thermostat for the gas-phase calculations is encouraging since its parameters have been originally fitted for the condensed-phase calculations. Very accurate molecular structures can be predicted by combining the equilibrium geometry obtained at a high level of electronic structure theory with vibrational amplitudes and corrections calculated using MD driven by a lower level of electronic structure theory.

Efficient stochastic thermostatting of path integral molecular dynamics

The path integral molecular dynamics (PIMD) method provides a convenient way to compute the quantum mechanical structural and thermodynamic properties of condensed phase systems at the expense of introducing an additional set of high frequency normal modes on top of the physical vibrations of the system. Efficiently sampling such a wide range of frequencies provides a considerable thermostatting challenge. Here we introduce a simple stochastic path integral Langevin equation (PILE) thermostat which exploits an analytic knowledge of the free path integral normal mode frequencies. We also apply a recently developed colored noise thermostat based on a generalized Langevin equation (GLE), which automatically achieves a similar, frequency-optimized sampling. The sampling efficiencies of these thermostats are compared with that of the more conventional Nosé-Hoover chain (NHC) thermostat for a number of physically relevant properties of the liquid water and hydrogen-in-palladium systems. In nearly every case, the new PILE thermostat is found to perform just as well as the NHC thermostat while allowing for a computationally more efficient implementation. The GLE thermostat also proves to be very robust delivering a near-optimum sampling efficiency in all of the cases considered. We suspect that these simple stochastic thermostats will therefore find useful application in many future PIMD simulations.

Colored-Noise Thermostats à la Carte

Recently, we have shown how a colored-noise Langevin equation can be used in the context of molecular dynamics as a tool to obtain dynamical trajectories whose properties are tailored to display desired sampling features. In the present paper, after having reviewed some analytical results for the stochastic differential equations forming the basis of our approach, we describe in detail the implementation of the generalized Langevin equation thermostat and the fitting procedure used to obtain optimal parameters. We discuss in detail the simulation of nuclear quantum effects, and demonstrate that, by carefully choosing parameters, one can successfully model strongly anharmonic solids such as neon. For the reader's convenience, a library of thermostat parameters and some demonstrative code can be downloaded from an on-line repository.