Gem-dimethyl Group Research Articles

Synthesis of (oxo)chlorin dimers chelated with thallium(III)

Two target dimers have been prepared for fundamental studies of hole/electron transfer. Metalation with thallium(III) enables clocking of the rate of hole/electron transfer between the two macrocycles. Each dimer contains a diphenylethyne linker joining two identical hydroporphyrins (chlorin or oxochlorin). The linker is substituted at the 4,4′-positions whereas each (oxo)chlorin is joined at the 10-position. Each (oxo)chlorin is equipped with a gem-dimethyl group at the 18-position to stabilize the hydroporphyrin chromophore toward adventitious dehydrogenation and a 3,5-di-tert-butyl group at the 5-position to achieve increased solubilization in organic media. The dimers parallel a prior set of diphenylethyne-linked (oxo)chlorin constructs containing zinc-free base, zinc-zinc, and copper-copper metalation states that have been examined in studies of electronic communication. The building block (oxo)chlorins for preparing the thallium-containing dimers have been prepared in quantities of 32–404 mg, a scale up to 14-fold larger than previously. Thallation of the free base (oxo)chlorin dimers was achieved with excess TlCl3⋅4H2O in CH2Cl2/CH3OH (3–4:1) upon overnight reaction at room temperature. The long-wavelength (Q[Formula: see text] absorption band of (oxo)chlorins lies between that of the zinc(II) and free base counterparts. Absorption spectral comparisons are provided of the thallium(III) and free base (oxo)chlorin monomers and dimers.

New Hydroxylactones and Chloro-Hydroxylactones Obtained by Biotransformation of Bicyclic Halolactones and Their Antibacterial Activity.

The aim of this study was to obtain new halolactones with a gem-dimethyl group in the cyclohexane ring (at the C-3 or C-5 carbon) and a methyl group in the lactone ring and then subject them to biotransformations using filamentous fungi. Halolactones in the form of mixtures of two diasteroisomers were subjected to screening biotransformations, which showed that only compounds with a gem-dimethyl group located at the C-5 carbon were transformed. Strains from the genus Fusarium carried out hydrolytic dehalogenation, while strains from the genus Absidia carried out hydroxylation of the C-7 carbon. Both substrates and biotransformation products were then tested for antimicrobial activity against multidrug-resistant strains of both bacteria and yeast-like fungi. The highest antifungal activity against C. dubliniensis and C. albicans strains was obtained for compound 5b, while antimicrobial activity against S. aureus MRSA was obtained for compound 4a.

Pd(II)-Catalyzed Desymmetrizing gem-Dimethyl C(sp3)-H Alkenylation/Aza-Wacker Cyclization Directed by PIP Auxiliary.

Desymmetrization of gem-dimethyl groups has been developed as an efficient pathway to achieve asymmetric C(sp3)-H functionalization. Herein, we described a Pd(II)-catalyzed desymmetrizing gem-dimethyl C(sp3)-H alkenylation/aza-Wacker cyclization directed by a bidentate 2-pyridinylisopropyl auxiliary. Chiral α-methyl γ-lactams were obtained in good yields (up to 82%) and high enantioselectivities (up to 91.5% ee).

Enantioselective Hydrofunctionalization of Cyclobutenones: Total Synthesis of gem-Dimethylcyclobutane Natural Products.

Cyclobutanes with a gem-dimethyl group are common motifs in natural products. However, strategies for constructing enantioenriched gem-dimethyl cyclobutanes are still underdeveloped. Herein, we report an enantioselective approach to synthesize a broad group of chiral 2,3-disubstituted cyclobutanones through sequential 1,4-conjugate addition/trapping/cross-coupling of readily available cyclobutenones. The intermediate 2-bromocyclobutanone provides a valuable synthetic handle for further coupling transformations. In addition, this strategy was successfully utilized to synthesize gem-dimethyl cyclobutane-containing natural products, including (+)-β-caryophyllene, (-)-raikovenal, (-)-1β,9αH-5-linoleoyloxy-4,5-secocaryophyllen-4-one, and (-)-rumphellanones A-C.

Redesigned Nylon 6 Variants with Enhanced Recyclability, Ductility, and Transparency.

Geminal (gem-) disubstitution in heterocyclic monomers is an effective strategy to enhance polymer chemical recyclability by lowering their ceiling temperatures. However, the effects of specific substitution patterns on the monomer's reactivity and the resulting polymer's properties are largely unexplored. Here we show that, by systematically installing gem-dimethyl groups onto ϵ-caprolactam (monomer of nylon 6) from the α to ϵ positions, both the redesigned lactam monomer's reactivity and the resulting gem-nylon 6's properties are highly sensitive to the substitution position, with the monomers ranging from non-polymerizable to polymerizable and the gem-nylon properties ranging from inferior to far superior to the parent nylon 6. Remarkably, the nylon 6 with the gem-dimethyls substituted at the γ position is amorphous and optically transparent, with a higher Tg (by 30 °C), yield stress (by 1.5 MPa), ductility (by 3×), and lower depolymerization temperature (by 60 °C) than conventional nylon 6.

ГЕТЕРОЦИКЛИЧЕСКИЕ ТИОПРОИЗВОДНЫЕ КАМФЕНА С ФРАГМЕНТОМ ФЕНИЛТЕТРАЗОЛА

It is known that the tetrazole ring is an important pharmacophore fragment included in the structure of drugs with more than 20 types of biological activity. In order to obtain new biologically active thioterpenoids with heterocyclic fragments, we set the task of combining the natural terpene skeleton and the nitrogen-containing heterocyclic function through the biogenic sulfur atom. We have used thiylation and sulfenylchlorination of (+)-camphene and its derivatives, which are difficult to obtain synthetically (cyclopropene and allene), with 1-phenyltetrazole-5-thiol and 1-phenyltetrazole-5-sulfenyl chloride. Studying the structure of hetarene sulfide obtained by the reaction of camphene with 1-phenyltetrazole-5-thiol in the presence of a Lewis acid (boron trifluoride etherate), allowed us to conclude that during the reaction a Wagner-Meerwein rearrangement occurs. The rearrangement leads to isomerization of the initial camphane structure with the formation of a terpene sulfide of bornane structure with an exo-position of the sulfide group relative to the bicyclic skeleton of the molecule. In non-catalytic sulfenylchlorination reactions isomerization of the camphene skeleton is not observed. 2,2-Dimethylnorbornane-3-spirocyclopropene forms the product of the “normal” addition of 1-phenyltetrazole-5-sulphenyl chloride to the double bond of cyclopropene. A mixture of two regioisomers with a trans-position of the sulfide group and a chlorine atom is observed. In this case, the chlorine atom is located on the endo side of the cyclopropane ring relative to the gem-dimethyl group, while the sulfide group is on the exo side. Sulfenylchlorination of 2,2-dimethyl-3-ethenylidenenorbornane occurs regio- and stereospecifically at a sterically less hindered double bond, with the sulfide group located at the C-10 atom and the chlorine atom at the C-11 atom.

Bacteriochlorin syntheses - Status, problems, and exploration

Bacteriochlorins – Nature’s near-infrared (NIR) chromophores – are distinguished by an intense ([Formula: see text] ∼;105 M[Formula: see text]cm[Formula: see text] long-wavelength absorption band in the ∼;700–1000 nm. The development of routes to prepare synthetic, tailorable bacteriochlorins holds promise for multiple disciplines where NIR-light-promoted photoactivity is of interest. A de novo route to bacteriochlorins equipped with a stabilizing gem-dimethyl group in each pyrroline ring was discovered in 2003. Continued development in this arena over 20 years has led to additional routes as well as methods to install substituents at selected positions about the perimeter of the macrocycle. The present paper reports studies that highlight substantial limitations of existing synthetic routes, including stymied access to multi-bacteriochlorin arrays and the inability to install (in a rational way) distinct groups at opposite sides of the macrocycle. The origins of the limitations are traced to particular stages of the chemistry ranging from derivatizing pyrroles, creating pyrrolines, constructing and elaborating dihydrodipyrrins, coupling dihydrodipyrrins, and forming macrocycles. Through exploration of a dozen aspects of bacteriochlorin syntheses, 60 new compounds (and nine known compounds via improved syntheses) have been prepared and characterized; the data include 20 single-crystal X-ray diffraction analyses. The research taken together points to areas of focus to fulfill the promise of this fascinating class of compounds.

Ring Closure and Ring Opening as Useful Scaffold Hopping Tools in Agrochemistry.

Ring closing acyclic parts of a molecular scaffold or the opposite manipulation, opening rings to produce pseudo-ring structures, is an important scaffold hopping manipulation. Analogues derived from biologically active compounds through the utilization of such strategies are often similar in shape and physicochemical properties and, therefore, likely to exhibit similar potency. This review will demonstrate how several different ring closure techniques, such as replacing carboxylic functions by cyclic peptide mimics, incorporating double bonds into aromatic rings, tying back ring substituents to a bicyclic structure, cyclizing adjacent ring substituents to an annulated ring, bridging annulated ring systems to tricyclic scaffolds, and exchanging gem-dimethyl groups by cycloalkyl rings, but also ring opening led to the discovery of highly active agrochemicals.

Structure-guided design of direct-acting antivirals that exploit the gem-dimethyl effect and potently inhibit 3CL proteases of severe acute respiratory syndrome Coronavirus-2 (SARS-CoV-2) and middle east respiratory syndrome coronavirus (MERS-CoV)

The high morbidity and mortality associated with SARS-CoV-2 infection, the etiological agent of COVID-19, has had a major impact on global public health. Significant progress has been made in the development of an array of vaccines and biologics, however, the emergence of SARS-CoV-2 variants and breakthrough infections are an ongoing major concern. Furthermore, there is an existing paucity of small-molecule host and virus-directed therapeutics and prophylactics that can be used to counter the spread of SARS-CoV-2, and any emerging and re-emerging coronaviruses. We describe herein our efforts to address this urgent need by focusing on the structure-guided design of potent broad-spectrum inhibitors of SARS-CoV-2 3C-like protease (3CLpro or Main protease), an enzyme essential for viral replication. The inhibitors exploit the directional effects associated with the presence of a gem-dimethyl group that allow the inhibitors to optimally interact with the S4 subsite of the enzyme. Several compounds were found to potently inhibit SARS-CoV-2 and MERS-CoV 3CL proteases in biochemical and cell-based assays. Specifically, the EC50 values of aldehyde 1c and its corresponding bisulfite adduct 1d against SARS-CoV-2 were found to be 12 and 10 nM, respectively, and their CC50 values were >50 μM. Furthermore, deuteration of these compounds yielded compounds 2c/2d with EC50 values 11 and 12 nM, respectively. Replacement of the aldehyde warhead with a nitrile (CN) or an α-ketoamide warhead or its corresponding bisulfite adduct yielded compounds 1g, 1eand1f with EC50 values 60, 50 and 70 nM, respectively. High-resolution cocrystal structures have identified the structural determinants associated with the binding of the inhibitors to the active site of the enzyme and, furthermore, have illuminated the mechanism of action of the inhibitors. Overall, the high Safety Index (SI) (SI=CC50/EC50) displayed by these compounds suggests that they are well-suited to conducting further preclinical studies.

Behavioural and Electrophysiological Response of Anastrepha fraterculus (Diptera: Tephritidae) to a γ-Lactone Synthetic Semiochemical.

Attractants are a powerful tool for pest management. The lack of specific attractants for the South American fruit fly, Anastrepha fraterculus, a complex of cryptic species of great economic importance in South America, makes it difficult to monitor the pest in the field. The γ-lactone male sex and aggregation pheromones of several Anastrepha species, naturally released in a 7:3 epianastrephin to anastrephin ratio, and a structurally related naturally occurring γ-lactone ((±)-trans-tetrahydroactinidiolide) with gem-dimethyl groups (dimethyl) at C(4), were evaluated as potential attractants of this species. Different age and mating conditions of A. fraterculus males and females were evaluated during electroantennography (EAG) and field cage experiments in which polymeric lures were deployed to contain 100 mg of attractant. Epianastrephin and dimethyl were EAG+ for all fly conditions, with epianastrephin eliciting the highest response for both sexes and immature flies showing greater responsiveness than mature flies. In the field cage experiments, immature flies were only attracted to leks; virgin females were attracted to leks, dimethyl, and both epianastrephin-anastrephin formulations (95 and 70 wt.% epianastrephin); mature-mated males were attracted to leks, dimethyl and 70 wt.% epianastrephin; and mature-mated females were only attracted to leks. Our bioassays showed a promising performance of the analog dimethyl since it elicited the same response as epianastrephin, requires fewer steps to synthesize, and contains one less chiral center than the natural pheromones. The attraction to leks was recorded for all mating conditions and ages of flies and suggests that air-borne volatiles of calling males contain cues that could act as sensory traps. The addition of any of these compounds in the synthetic attractants may result in a greater attraction and thus deserves further evaluation. Dose-response experiments will provide additional information to move a step forward and validate the results obtained in open-field conditions.

Photoredox-catalyzed reaction as a powerful tool for rapid natural product Gem-dimethylation modification: discovery of potent anti-cancer agents with improved druggability

Tylophorine has diverse biological activities; however, the stability, solubility, and central nervous system toxicity have severely limited use of tylophorine. The gem-dimethyl group is an organic chemistry functional group that consists of two methyl groups bonded to the same carbon atom. This feature has gained significant attention in medicinal chemistry due to its unique properties and potential applications in drug design. We applied a new photoredox methodology to tylophorine modification, resulting in a series of gem-dimethyl tylophorine analogues. Among the analogues, compound 4b demonstrated promising activity against a wide range of tumor cell lines and exhibited significantly improved drug-like properties, including enhanced solubility and stability. Compound 4b showed an exceptional inhibitory effect (7.8 nM) against a C481S mutation-induced ibrutinib-resistant non-Hodgkin’s lymphoma cell line, as well as primary tumor cell lines obtained from patients. Importantly, compound 4b exhibited significantly reduced anti-proliferative activity against the normal cell line tested, indicating the potential for an enhanced therapeutic window for compound 4b. Based on these early-stage data, we believe that our study provides a solid foundation for the development of new therapeutic agents for potential drug-resistant cancer treatment in the near future.

Sinapyl alcohols analogues from the stembark of Zanthoxylum rhetsa (Roxb.) DC and their cytotoxic activity against MCF-7 breast cancer cell line

Abstract Three sinapyl alcohol analogues, 4-O-[(2E)-3,7,7-Trimethyl-2,6-octadiene] (1), 4-O-[(2E)-3,7-Dimethyl-2,7-octadiene-6-ol] (2) and 4-O-[(2E)(5E)-3,7,7-Trimethyl-2,5-octadiene-7-ol] (3) have been isolated from the stem bark of Zanthoxylum rhetsa (Roxb.) DC (Rutaceae). The chemical structures of compounds 1-3 were determined based on spectroscopic data including one and two-dimensional NMR, and mass spectroscopy. Cytotoxic activity against MCF-7 breast cancer cell lines was tested in vitro using these sinapyl alcohols. Among the isolated compounds 1, showed the strongest activity with an IC50 value of 54.18 µg/mL, suggesting that the presence of a gem-dimethyl and hydroxyl groups play important role for cytotoxic activity. Keywords: Cytotoxic activity, MCF-7 cell lines, Rutaceae, sinapyl alcohol, Zanthoxylum rhetsa (Roxb.) DC.

De Novo Synthesis of Bacteriochlorins Bearing Four Trideuteriomethyl Groups

Site-specific introduction of isotopes in tetrapyrrole macrocycles provides the foundation for probing physicochemical features germane to photosynthetic energy-transduction processes, but has chiefly been done with porphyrins rather than the more biologically relevant hydroporphyrin analogues of native photosynthetic pigments. A prior study incorporated pairwise 13C or 15N atoms in the skeleton of a bacteriochlorin containing a gem-dimethyl group in each pyrroline ring. Here, a complementary effort is reported that installs deuterium atoms in substituents at the perimeter of a bacteriochlorin. Thus, perdeuteriated 3-methyl-2,4-pentanedione was converted in an 8-step synthesis via the intermediacy of tert-butyl 5-formyl-3,4-bis(trideuteriomethyl)pyrrole-2-carboxylate to the 2,3,12,13-tetrakis(trideuteriomethyl)-8,8,18,18-tetramethylbacteriochlorin (BC-2). The fidelity of isotope substitution was maintained throughout the synthesis. Resonance Raman spectroscopy of the copper chelate (CuBC-2) revealed that addition of the four β-pyrrolic substituents alone is not sufficient to account for the vibronic complexity observed for the copper chelate of bacteriochlorophyll a (CuBChl a). The increased vibronic activity exhibited by the natural pigments and CuBChl a must arise from the increased structural complexity of the macrocycle.

Distorted Copper(II) Complex with Unusually Short CF···Cu Distances.

We find a Cu(II)-(L-CF3)2 complex (L-CF3 = 2,2,2-trifluoro-N-[2-(pyridin-2-yl)propan-2-yl]acetamide) with a distorted "seesaw" geometry. It has the shortest crystallographic CF···Cu distances yet reported, to the best of our knowledge (<2.6 Å), for which computational and experimental data indicate a secondary bonding interaction. A comparison with a CCl3 version and one without ligand backbone gem-dimethyl groups suggests a steric origin for the distorted geometry, resulting from the specific ligand interactions.

A Bioreductive Protecting Group for RNA Synthesis

This protocol describes a method for the preparation of ribonucleoside phosphoramidite bearing a bioreductive protecting group on the 2'-OH group and its application in the synthesis of bioreduction-responsive oligonucleotides. The protecting group used in this method consists of the modified 4-nitrobenzyl skeleton, which has gem-dimethyl groups at benzylic positions to enable deprotection under physiological conditions. Applying the synthesized ribonucleoside phosphoramidite to solid-phase synthesis of oligonucleotides, a 2'-O-protected oligonucleotide was obtained without any undesirable cleavages under standard oligonucleotide synthesis conditions. The 2'-O-protected oligonucleotide was then treated with a combination of nitroreductase (Escherichia coli) and NADH as a bioreduction system for cleavage of the 2'-O-protecting group. After reduction of the nitro group, the protecting group was deprotected in a time-dependent manner. Thus, this protection technology is a potential new tool for production of reduction-responsive RNA-based materials that can be used in life and medical sciences. © 2021 Wiley Periodicals LLC. Basic Protocol 1: Synthesis of ribonucleoside phosphoramidite bearing a bioreductive protecting group Basic Protocol 2: Synthesis of 2'-O-protected oligonucleotides and their deprotection properties under bioreduction.

2-(Pyridin-2-yl)isopropyl (PIP) Amine: An Enabling Directing Group for Divergent and Asymmetric Functionalization of Unactivated Methylene C(sp3)–H Bonds

ConspectusDirecting group (DG) assistance provides a good solution to the problems of reactivity and selectivity, two of the fundamental challenges in C(sp3)-H activation. However, the activation of unbiased methylene C(sp3)-H bonds remains challenging due to the high heterolytic bond dissociation energy and substantial steric hindrance. Two main strategies have been developed thus far, that is, use of a strongly coordinating bidentate DG pioneered by Daugulis and use of a weakly coordinating monodentate DG accelerated by pyridine-type ligands, as disclosed by Yu. The seminal work by Daugulis sparked significant interest in the application of the monoanionic bidentate auxiliary in aliphatic C-H activation reactions. Our research has focused on enabling the divergent functionalization and enantiotopic differentiation of unactivated methylene C-H bonds. Inspired by the structure of bidentate 8-aminoquinoline and the accelerating effect of the gem-dimethyl moiety in cyclometalations, we developed a strongly coordinating bidentate 2-(pyridine-yl)isopropyl (PIP) amine DG consisting of a pyridyl group, a gem-dimethyl moiety, and an amino group, which enabled the divergent functionalization of unactivated β-methylene C(sp3)-H bonds to forge C-O, C-N, C-C, and C-F bonds with palladium catalysts. The exclusive β-selectivity was ascribed to the preferential formation of kinetically favored [5,5]-bicyclic palladacycle intermediates. DFT calculations revealed that the well-designed gem-dimethyl group was responsible for the lowered energy and compressed bite angle of the key transition state related to C-H cleavage.More recently, the combination of PIP amine with axially chiral ligands was found to promote asymmetric functionalization of unbiased methylene C(sp3)-H bonds, a challenging research topic in the area of C-H activation that remains to be addressed. Two different types of axially chiral ligands, namely, non-C2-symmetric chiral phosphoric acids (CPAs) and 3,3'-disubstituted BINOLs, have been developed. The former enabled Pd(II)-catalyzed inter- and intramolecular arylation of unbiased methylene C(sp3)-H bonds with high enantioselectivity, whereas the latter promoted a series of asymmetric functionalization reactions, such as alkynylation, arylation, alkenylation/aza-Wacker cyclization, and intramolecular amidation. The unexpectedly high stereocontrol compared with other bidentate DGs might be attributable to steric communication between the ligand and gem-dimethyl moiety of PIP amine. Thus far, the combination of PIP amine DG with 3,3'-disubstituted BINOL ligands is arguably the most general strategy for asymmetric functionalization of unbiased methylene C(sp3)-H bonds. Finally, the ease of installation and removal of PIP under mild conditions and synthetic applications are described.

Geminal Repulsion Disrupts Diels-Alder Reactions of Geminally Substituted Cyclopentadienes and 4H-Pyrazoles.

We have experimentally and computationally explored the sluggish Diels-Alder reactivities of the geminally substituted 5,5-dimethylcyclopentadiene and 5,5-dimethyl-2,3-diazacyclopentadiene (4,4-dimethyl-4H-pyrazole) scaffolds. We found that geminal dimethylation of 1,2,3,4-tetramethylcyclopentadiene to 1,2,3,4,5,5-hexamethylcyclopentadiene decreases the Diels-Alder reactivity towards maleimide by 954-fold. Quantum mechanical calculations revealed that the decreased Diels-Alder reactivities of gem-dimethyl substituted cyclopentadienes and 2,3-diazacyclopentadienes are not a consequence of unfavorable steric interactions between the diene and dienophile as reported previously, but a consequence of the increased repulsion within the gem-dimethyl group in the transition state. The findings have implications for the use of cyclopentadienes in "click" chemistry.

Attenuation of the Reaction of Michael Acceptors with Biologically Important Nucleophiles.

β-Elimination of drugs tethered to macromolecular carbamates provides a platform for drug half-life extension. However, the macromolecular Michael acceptor products formed upon drug release can potentially react with biological amines and thiols and may raise concerns about safety. We desired to mitigate this possibility by developing linkers that have predictable rates of β-elimination but suppressed rates of nucleophilic addition to their Michael acceptor products. We prepared Michael acceptor products of β-eliminative linkers that contained a methyl group at the Cβ carbon or a gem-dimethyl group at the Cγ carbon and studied the kinetics of their reactions with the most prevalent biological nucleophiles-amine and thiol groups. Aza-Michael reactions with glycine are slowed about 20-fold by methylation of the β-carbon and 175-fold with a gem-dimethyl group at the γ-carbon. Likewise, addition of the glutathione thiol to γ-gem-dimethyl Michael acceptors was retarded 7-24-fold compared to parent unsubstituted linkers. It was estimated that in an in vivo environment of ∼0.5 mM macromolecular thiols or ∼20 mM macromolecular amines-as in plasma-the reaction half-life of a typical Michael acceptor with a γ-gem-dimethyl linker could exceed 3 years for thiols or 25 years for amines. We also prepared a large series of γ-gem-dimethyl β-eliminative linkers and showed excellent structure-activity relationships of elimination rates with corresponding unsubstituted parent linkers. Finally, we compared the first-generation unsubstituted and new gem-dimethyl β-eliminative linkers in a once-monthly drug delivery system of a 39 amino acid peptide. Both linkers provided the desired half-life extension of the peptide, but the Michael acceptor formed from the gem-dimethyl linker was much less reactive. We conclude that the γ-gem-dimethyl β-eliminative linkers provide high flexibility and greatly reduce potential reactions of Michael acceptor products with biologically important nucleophiles.

Rhodium-Catalyzed Enantioselective Synthesis of β-Amino Alcohols via Desymmetrization of gem-Dimethyl Groups.

Desymmetrization of gem-dimethyl groups en route to the rhodium(III)-catalyzed enantioselective sp3 C-H amidation is reported. Synthetically important β-amino alcohol derivatives were accessed in moderate to good yields and high enantioselectivity. The high enantioselectivity is enabled by an appropriate oxime directing group, sterically biased gem-groups in the C-H substrate, and high reactivity of the amidating reagent.

An Innovative Hydrogen Peroxide-Sensing Scaffold and Insight Towards its Potential as an ROS-Activated Persulfide Donor.

Reactive sulfur species, such as hydrogen sulfide, persulfides, and polysulfides, have recently emerged as key signaling molecules and important physiological mediators within mammalian systems. To better assess the therapeutic potential of their exogenous administration, we report on the development of a unique hydrogen peroxide (H2 O2 )-sensing motif and its capacity for providing cellular protection against oxidative stress while serving as a reactive oxygen species (ROS)-activated persulfide donor. With the strategic implementation of a gem-dimethyl group to promote both stability and cyclization, we found the initial rate of payload release from this newly derived scaffold to be directly proportional to the concentration of H2 O2 and to proceed via an unprecedented pathway that avoids the production of electrophilic byproducts, a severe limitation that has plagued the physiological application of previous designs.