Gastrointestinal Release Research Articles

Preparation, characterization, stability and functional properties of andrographolide loaded kafirin/carboxymethyl cellulose composite particles using antisolvent precipitation method

Enhancing the oral bioavailability of hydrophobic nutraceuticals and protecting bioactive components through encapsulation systems has gained significant attention in food science. This study explored the preparation and characterization of kafirin (Kaf)/carboxymethyl cellulose (CMC) composite nanoparticles for encapsulating andrographolide (AG) using the antisolvent precipitation method. The optimal Kaf to CMC mass ratio was identified as 4:1, resulting in nanoparticles with an average diameter of 146.4 nm. CMC markedly improved the water dispersibility of the nanoparticles compared to Kaf alone. The formation of these composite nanoparticles was mainly driven by hydrophobic interactions, hydrogen bonding, and electrostatic interactions. Compared to Kaf nanoparticles, the Kaf/CMC nanoparticles showed enhanced encapsulation efficiency, gastrointestinal release characteristics, and stability. Additionally, AG-loaded composite nanoparticles showed exhibited superior biological safety and anti-cancer effects, highlighting their potential for therapeutic applications. In conclusion, Kaf/CMC composite nanoparticles present a promising delivery system for hydrophobic nutraceuticals and drugs, contributing to advancements in drug delivery technologies and nutraceutical formulations.

The fabrication of gastrointestinal pH-responsive sodium alginate surface-modified protein vehicles to improve limonin digestive stability, bioaccessibility and trans-intestinal mucus barrier capacity

Protein-based delivery systems tend to degrade too quickly in the gastrointestinal tract. Applying polysaccharide-based surface coatings on protein carriers is an effective strategy to prevent interference from gastric acid and proteases during the digestive process. This study prepared gastrointestinal pH-responsive bovine serum albumin (BSA)-myristic acid (MA) carriers using sodium alginate (SA)-based surface coating technology to improve the digestive properties and intestinal mucus penetration of limonin (LM). The results showed that ultrasonication caused uniform hydrophilic BSA and MA particle formation in optimal conditions. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) observations confirmed that SA adhered to the BSA-MA particle surfaces via electrostatic interaction at pH 4, causing the controlled gastrointestinal release of the self-assembled BSA-MA complexes. The subsequent SA-BSA-MA complexes displayed an LM encapsulation yield (EY) of >84%. In vitro, simulated gastrointestinal digestion indicated that compared with free LM, the SA-BSA-MA particles significantly increased the intestinal LM retention rate, bioaccessibility, and micellization rate by 45.49%, 155.48%, and 102.14%, respectively. The results of the artificial intestinal mucus experiments demonstrated that the trans-intestinal mucus barrier capacity of SA-BSA-MA particle-loaded LM was significantly enhanced. Its apparent permeability coefficient (Papp) (6.53 × 10−6 cm/s for free LM) and intestinal mucus permeability (17.56% for free LM) increased substantially to 14.22 × 10−6 cm/s and 38.22%. This study presents a gastrointestinal pH-responsive delivery system that effectively improves the ability of hydrophobic nutrients to cross the intestinal mucus barrier.

Design and Characterization of Liposomal-Based Carriers for the Encapsulation of Rosa canina Fruit Extract: In Vitro Gastrointestinal Release Behavior.

The increasing demand for natural compounds as an alternative to synthetic antioxidants and conservans has led to the utilization of secondary plant metabolites in the food industry, as these bioactive compounds possess great antioxidative and antimicrobial properties without side effects on human health. Despite this, the sensitivity of plant-derived compounds is a restrictive factor in terms of their full potential. The current research aimed to characterize rosehip-fruit-extract-loaded liposomes (non-treated and UV-irradiated) in terms of their density, surface tension, viscosity, chemical composition (FTIR and HPLC analyses), and thermal behavior. In the storage stability study, the vesicle size, polydispersity index (PDI), zeta potential, conductivity, and mobility of the liposomes were monitored. FTIR analysis confirmed that the plant compounds were successfully loaded within the carrier, while no chemical reaction between the rosehip fruit extract and phospholipids was detected. The results of the HPLC analysis evidence the high potential for liposomal encapsulation to protect sensitive bioactives in the rosehip fruit extract from the degrading effect of UV irradiation. The size of the rosehip-fruit-extract-encapsulated liposomes increased on the seventh day of storage from 250 nm to 300 nm, while the zeta potential values were between -21 mV and -30 mV in the same period and further stabilized over 60 days of monitoring. In Vitro release studies in water and simulated gastrointestinal fluids showed that the presence of enzymes and bile salts (in intestinal fluid) enhanced the rosehip-polyphenol permeability from liposomes (70.3% after 6 h) compared with their release in water after 24 h and in gastric fluid after 4 h (38.9% and 41.4%, respectively). The obtained results indicate that the proliposome method was an effective method for rosehip fruit extract liposomal encapsulation and for the delivery of these plant-derived bioactives in foods.

Molecular interaction of cyclodextrins with cellulose nanocrystals: A new venue for improving the functional properties of Pickering emulsions

The design of functional delivery systems is essential for storing and releasing active components. Inspired by the structure of Nepenthes mirabilis, cellulose nanocrystals (CNC) cooperate with cyclic α-cyclodextrins (α-CD), β-cyclodextrins (β-CD), and γ-cyclodextrins (γ-CD) to form nanocomposites at different mass ratios for the delivery the Mosla chinensis essential oils (EO)-loaded Pickering emulsions (PE), respectively. Characterization methods including FT-IR, TG, XPS, AFM, XRD, and three-phase contact angle were used to analyze the structure of the nanocomposites. The molecular docking and molecular dynamic simulation results revealed that the most hydrogen bonds were formed between β-CD and CNC, but the tendency for γ-CD and CNC to bond with hydrogen bonds was stronger in the molecular dynamic simulation. Subsequently, the physicochemical properties of emulsions stabilized by CNC/CDs nanocomposites were characterized through particle size, potential, microstructure, long-term stability, rheology, and aqueous phase distribution indexes. The results showed that the different mass ratios CNC/α-CD and CNC/β-CD nanocomposites stabilized PE had smaller droplet scales and better stability. While CNC/γ-CD nanocomposites had a negative effect on the emulsion. The in vitro release results showed that the emulsions stabilized by CNC/CDs nanocomposites had a slow-release rate for EO by diffusion. The simulated gastrointestinal release showed that CNC/β-CD-PE had the highest bioavailability. Moreover, CNC/β-CD-PE reduced the minimal inhibitory concentration of EO by a mechanism that disrupts the membrane structure of bacteria. Therefore, the introduction of β-CD may be an effective alternative in regulating the physical properties, function, and stabilization of CNC-based PE. These findings provide a scientific basis for the rational structural design of delivery systems for the encapsulated aroma molecules.

Formulation of novel functional extrudates containing natural bioactive compounds

Incorporating natural antimicrobial agents into food systems is a promising alternative to synthetic additives. This study developed corn-based functional extrudates enriched with essential oils from oregano, rosemary, chamomile, and hypericum (EOB) via twin screw extrusion processing. EOB was introduced in both encapsulated and non-encapsulated forms using electrohydrodynamic processing, spray drying, and freeze drying within a whey protein isolate and pullulan matrix. Extrudates containing spray-dried EOB (SP-EOB) achieved the highest extrusion efficiency (72.94% ± 1.16%). Morphological analysis revealed homogeneous structures for XE and XS extrudates, while XF extrudates were more porous. The gastrointestinal release kinetics of EOB from the extrudates were best described by the Korsmeyer-Peppas model, indicating an anomalous diffusion mechanism with “n” values ranging from 0.480 to 0.650. These findings highlight the potential for naturally bioactive and sustainable food products via advanced processing methods, reducing dependence on synthetic additives.

Functional mango juice with apigenin encapsulated in spray-dried chitosan-coated liposomes: Characterisation, in-vitro gastrointestinal release, sensory acceptance, and storage stability

Given the diverse health benefits of apigenin (AP), functional foods containing AP might interest the health-conscious market. However, the poor aqueous solubility of AP hinders its direct incorporation into food products. To overcome these limitations, AP was encapsulated in spray-dried unilamellar liposomes coated with chitosan. This study investigated the potential of spray-dried chitosan-coated AP liposomes (SCAL) for delivering AP in mango juice. The incorporation of SCAL did not alter the juice's proximate compositions or substantially affect its physicochemical properties. Mango juice with SCAL attained a comparable sensory acceptance to the control juice, with the added benefit of higher antioxidant capacity. Compared to the unencapsulated AP, SCAL exhibited a higher bioaccessibility of AP in mango juice, with a rapid release of AP during intestinal digestion. The pH values, total soluble solids, and colour properties of juice with SCAL did not change remarkably during juice storage at 4 °C for 28 days. On day 28, the retention of AP content and antioxidant capacity were higher in mango juice added with SCAL than the unencapsulated AP. Therefore, SCAL can be promising in delivering AP in aqueous food systems, making it possible to develop functional foods.

Development, Characterization and In Vitro Gastrointestinal Release of PLGA Nanoparticles Loaded with Full-Spectrum Cannabis Extracts

Cannabinoids, such as ∆9-tetrahydrocannabinol (THC) and cannabidiol (CBD), are effective bioactive compounds that improve the quality of life of patients with certain chronic conditions. The copolymer poly(lactic-co-glycolic acid) (PLGA) has been used to encapsulate such compounds separately, providing pharmaceutical grade edible products with unique features. In this work, a variety of PLGA based nanoformulations that maintain the natural cannabinoid profile found in the plant (known as full-spectrum) are proposed and evaluated. Three different cannabis sources were used, representing the three most relevant cannabis chemotypes. PLGA nanocapsules loaded with different amounts of cannabinoids were prepared by nanoemulsion, and were then functionalized with three of the most common coating polymers: pectin, alginate and chitosan. In order to evaluate the suitability of the proposed formulations, all the synthesized nanocapsules were characterized, and their cannabinoid content, size, zeta-potential, morphology and in vitro bioaccessibility was determined. Regardless of the employed cannabis source, its load and the functionalization, high cannabinoid content PLGA nanocapsules with suitable particle size and zeta-potential were obtained. Study of nanocapsules’ morphology and in vitro release assays in gastro-intestinal media suggested that high cannabis source load may compromise the structure of nanocapsules and their release properties, and hence, the use of lower content of cannabis source is recommended.Graphical

Highly Effective Nobiletin-MPN in Yeast Microcapsules for Targeted Modulation of Oxidative Stress, NLRP3 Inflammasome Activation, and Immune Responses in Ulcerative Colitis.

Inflammatory bowel disease (IBD) etiology is intricately linked to oxidative stress and inflammasome activation. Natural antioxidant nobiletin (NOB) contains excellent anti-inflammatory properties in alleviating intestinal injury. However, the insufficient water solubility and low bioavailability restrict its oral intervention for IBD. Herein, we constructed a highly efficient NOB-loaded yeast microcapsule (YM, NEFY) exhibiting marked therapeutic efficacy for dextran sulfate sodium (DSS)-induced ulcerative colitis (UC) at a low oral dose of NOB (20 mg/kg). We utilized the metal polyphenol network (MPN) formed by self-assembly of epigallocatechin gallate (EGCG) and FeCl3 as the intermediate carrier to improve the encapsulation efficiency (EE) of NOB by 4.2 times. These microcapsules effectively alleviated the inflammatory reaction and oxidative stress of RAW264.7 macrophages induced by lipopolysaccharide (LPS). In vivo, NEFY with biocompatibility enabled the intestinal enrichment of NOB through controlled gastrointestinal release and macrophage targeting. In addition, NEFY could inhibit NLRP3 inflammasome and balance the macrophage polarization, which favors the complete intestinal mucosal barrier and recovery of colitis. Based on the oral targeted delivery platform of YM, this work proposes a novel strategy for developing and utilizing the natural flavone NOB to intervene in intestinal inflammation-related diseases.

Oxidised porous starch carrier for caffeine delivery: preparation, characterisation, and in vitro release

SummaryThis work established an oxidised porous starch carrier system for the administration of caffeine by selectively oxidising the main hydroxyl groups at the C6 positions of porous starch to carboxyl groups using 2,2,6,6‐tetramethylpiperidoxyl (TEMPO) oxidation. The loading capacity and encapsulation efficiency of oxidised porous starch on caffeine rose as the oxidation degree (0%–90%) increased, increasing by 4.66 and 4.95 times, respectively, at 90% oxidation. The crystallinity of porous starch diminished after TEMPO oxidation, while the crystalline caffeine transferred into an amorphous state when loaded onto oxidised porous starch. Following oxidation, the absolute value of porous starch surface potential rose, enabling the granules avoided aggregation. Caffeine formed tighter bonds with oxidised porous starch in acidic conditions due to the dissociation of carboxyl groups, which lead to a peak loading capacity (8.02%) of oxidised porous starch with 90% oxidation at pH 4. Electrostatic interactions and hydrogen bonds were the driving forces. Long‐term gastrointestinal release of caffeine was achieved utilising oxidised porous starch as carriers.

Encapsulation of avocado oil with modified rice starch: thermal and functional properties and gastrointestinal release

Encapsulation of avocado oil with modified rice starch: thermal and functional properties and gastrointestinal release

Increasing the bioavailability of curcumin using a green supercritical fluid technology-assisted approach based on simultaneous starch aerogel formation-curcumin impregnation

A green approach based on simultaneous starch aerogel formation-curcumin impregnation via supercritical fluid technology was used to increase the bioavailability of curcumin. The loading amounts of curcumin were 16.4, 21.4, and 24.9 mg/g of aerogel for the 25% Amyl-loaded, 55% Amyl-loaded, and 72% Amyl-loaded samples, respectively. Curcumin-loaded aerogels showed the eventual distribution of curcumin in the hydrophobic area of the internal structure of the aerogels. In vitro gastrointestinal release profiles demonstrated the enhanced curcumin release from the curcumin-loaded aerogel formulations produced by the SC-CO2 technology over free curcumin. After intestinal digestion, the percentage of released curcumin from 25% Amyl-loaded, 55% Amyl-loaded, and 72% Amyl-loaded was 7.2, 12.1, and 12.1%, respectively, while the release of native curcumin was only 0.5%. Caco-2 cell permeation studies revealed superior bioavailability of curcumin from the curcumin-loaded aerogels. Curcumin-loaded aerogels exhibited improved storage stability than free curcumin.

Black rice anthocyanins nanoparticles based on bovine serum albumin and hyaluronic acid: Preparation, characterization, absorption and intestinal barrier function protection in Caco-2 monolayers

Black rice anthocyanins (BRA) nanoparticles (NPs) were prepared using hyaluronic acid (HA), oxidized hyaluronic acid (OHA) and bovine serum albumin (BSA) to enhance the absorption and bioactivity of anthocyanins (ACNs). Results showed that HA/OHA-BSA-BRA NPs had a spherical morphology and excellent dispensability, with hydrated radius ~ 500 nm, zeta potential ~ − 30 mV, and encapsulation efficiency ~21 %. Moreover, using in vitro gastrointestinal release assay, we demonstrated that both BRA-loaded NPs exhibited effective controlled release properties of ACNs, significantly enhancing the accessibility of ACNs to the intestine. Cellular experiments showed that both two NPs had good biocompatibility and increased uptake of BRA. Furthermore, in comparison to the free BRA group, both BRA NPs groups significantly decreased the TEER value and increased the expression of tight junction proteins (Claudin 1, Occludin and ZO-1) in Caco-2 cell monolayers with LPS-induced damage. Therefore, our study demonstrated that HA/OHA-BSA-BRA NPs are promising carriers of ACNs and can effectively prevent the LPS-induced intestinal barrier injury in vitro.

In Vitro Gastrointestinal Release of Chlorogenic Acid and Curcumin Co-Encapsulated in Double Emulsions with the Outer Interface Stabilized by Cellulose Nanocrystals

A Pickering double emulsion (DE) with an outer (O:W2) interface stabilized by cellulose nanocrystals (DE-CNC) was designed as a co-delivery systems for chlorogenic acid (CA) and curcumin, then compared with a control DE emulsion with an O:W2 interface stabilized with sodium caseinate (DE-NaCas). DE-CNC was more resistant to creaming during storage (6.79%, day 42) and showed higher encapsulation efficiency (EE) of CA (>90%). Conversely, both DEs exhibited similarly high EE for curcumin (>97%). The ζ-potential values were highly negative in both DEs, but tended to be lower in DE-CNC due to the highly negative charge of the CNCs. DE-CNC allowed for a steady release of CA during the oral, gastric, and intestinal phases of digestion, while a total release of CA was already observed in the gastric phase in case of DE-NaCas. The bioaccessibility of CA was similar in both DEs (~57–58%). Curcumin was mainly released in the intestinal phase with both DEs, reaching slightly lower bioaccessibility values with DE-CNC. The use of CNCs as a stabilizer for the outer interface of DEs is a promising strategy to increase the stability and EE of these systems, providing oral co-delivery vehicles capable of releasing significantly bioactive compounds during the intestinal phase of digestion.

Gastrointestinal release site for delayed release and gelatin capsules in healthy dogs.

Gelatin capsules deliver their contents to the stomach, while delayed-release (DR) capsules are designed to allow delivery to the small intestine. This study evaluated the gastrointestinal release site of DR capsules in six healthy adult dogs compared to gelatin capsules. Both gelatin and DR capsules were filled with barium-impregnated polyethylene spheres (BIPS™), and following enteral administration, release site was assessed using abdominal radiographs at baseline, immediately after ingestion, 15 min post-ingestion, 30 min post-ingestion, and then every 30 min thereafter. The evaluated phases included fasted conditions (phase 1, n = 6), increased meal size (phase 2, n = 2), double encapsulation (phase 3, n = 2), and altered capsule size (phase 4, n = 1). The released site was the stomach in all phases for both capsule types. In phase 1, DR capsules had a significantly prolonged time (median 60 min, range 60-90) to release BIPS™ compared to gelatin capsules (15 min, range 15-30; p = .03). In phase 2 (full meal size), 3 (double encapsulation), and 4 (smaller capsule size) pilot studies, release time was prolonged but still occurred in the stomach. This is similar to the release site for gelatin capsules but differs from the release site for DR capsules in people. This has implications for pharmacologic outcomes for products that are affected by gastric physiology (e.g. fecal microbiota transplantation). Based on this pilot data, clinicians and researchers should not assume DR capsules will allow for intestinal delivery of contents in dogs. Future studies should be conducted on larger and varied populations of dogs.

Stability and programmed sequential release of Lactobacillus plantarum and curcumin encapsulated in bilayer-stabilized W1/O/W2 double emulsion: Effect of pectin as protective shell

In order to overcome the problem that traditional W1/O/W2 double emulsions do not have targeted release performance, thereby better meeting the health needs of consumers, ovalbumin fibrils/pectin-based bilayer-stabilized double emulsion (OP-BDE) co-encapsulated with Lactobacillus plantarum and curcumin was constructed with pectin as the outer protective shell, which was expected to be used in the development of novel functional foods. The effects of pectin coating on the viability of Lactobacillus plantarum under conditions including storage, pasteurization, freeze–thaw cycles and in vitro simulated digestion were investigated. Results showed that pectin as protective shell could significantly enhance the tolerance of Lactobacillus plantarum to various environmental factors. Besides, the adsorption of pectin endowed OP-BDE with higher lipolysis and stronger protective effect on curcumin, remarkably improving the photostability and bioaccessibility of curcumin. In addition, in vitro simulated gastrointestinal release study indicated that OP-BDE possessed programmed sequential release property, allowing curcumin and Lactobacillus plantarum to be released in small intestine and colon, respectively. OP-BDE is the first reported co-delivery emulsion system with programmed release characteristic. This study provides new insights into OP-BDE in constructing co-delivery systems and programmed sequential release of active substances, and has potential reference and application value in actual food production.

Alginate-coated pomelo pith cellulose matrix for probiotic encapsulation and controlled release

A novel carrier comprised of ethanol- and alkali-modified cellulosic pomelo pith matrix coated with alginate was developed to improve viability while enabling gastrointestinal release of probiotics. Scanning electron microscopy imaging revealed the agricultural byproduct had a honeycomb-structured cellulose framework, enabling high loading capacity of the probiotic Lactobacillus plantarum up to 9 log CFU/g. Ethanol treatment opened up pores with an average diameter of 97 μm, while alkali treatment increased swelling and porosity, with an average pore size of 51 μm. The survival rate through the stomach was increased from 89.76 % to 91.08 % and 91.24 % after ethanol and alkali modification, respectively. The control group displayed minimal release in the first 4 h followed by a burst release. Both ethanol modification and alkali modification resulted in constant linear release over time. The release time was prolonged when decreasing the width of the pomelo peel rolls from 10 mm to 5 mm while keeping the volume of the peel constant. After 8 weeks of refrigerated storage, the cellulose-encapsulated probiotics retained viability above 7 log CFU/g. This study demonstrates the potential of the structurally intact, sustainably-sourced cellulosic pomelo pith for probiotic encapsulation and controlled delivery.

In vitro release and bioaccessibility of oral solid preparations in a dynamic gastrointestinal system simulating fasted and fed states: A case study of metformin hydrochloride tablets

Food and formulation characteristics are crucial factors affecting the gastrointestinal release and absorption kinetics of oral solid preparations. In the present study, the dynamic continuous release and bioaccessibility of metformin hydrochloride immediate-release (IR) and sustained-release (SR) tablets were investigated in the dynamic human stomach-intestine (DHSI-IV) system simulating fasted and fed states in healthy adults. Both tablet formulations (particularly IR tablet) exhibited a postponed release in the fed state compared to the fasted state. Correspondingly, the bioaccessible fraction of metformin from IR tablets in the presence of high-fat meal was significantly reduced to 76.2 % of the fasted state. However, the in vitro bioaccessibility was less impaired by food for SR tablets with a fed/fasted ratio of 95.5 %. A convolution-based approach was used to convert in vitro bioaccessibility results to plasma concentration data. The predicted plasma concentration curve showed good agreement with human data in terms of pharmacokinetic (PK) parameters. In the fasted state, the predicted Cmax, Tmax and AUC0-24h of IR tablets were 943.9 ± 25.7 ng/mL, 2.0 ± 0.4 h and 7090.7 ± 112.0 ng.h/mL, respectively, mirroring values observed in healthy subjects. Overall, the DHSI-IV system has demonstrated potential to assess and predict the impact of meal intake on the in vivo release and absorption behaviors of oral solid preparations.

The aggregation of casein micelles induced by Ca2+ during in vitro digestion: effects on the release of loaded anthocyanins.

Colloidal calcium phosphate (CCP) confers a modifiable structure to micellar casein (MC), which endows it with potential advantages as a delivery carrier. However, it is difficult to achieve multipattern release of the core material in the intestine with MC as a single wall. In this study, we prepared an anthocyanin-casein-based delivery system utilizing MC with different freezing degrees as the wall material with the objective of achieving the controlled release of anthocyanin as the model core in the intestine. The results showed that freezing could significantly reduce the CCP level up to 50%. Static in vitro simulated digestion with the addition of exogenous Ca2+ showed that the designed delivery system exhibited low anthocyanin release (15%-35%) in the gastric tract. The pattern of release in the intestine depended on the CCP dissociation degree. High and low dissociation degrees corresponded to slow release (from 15% to 65% within 2 h) and burst release (from 35% to 90% within 5 min), respectively. WAXS/SAXS analysis revealed that exogenous serum Ca2+ inherent in simulated gastric fluid and endogenous serum Ca2+ induced by CCP dissociation was synergistically involved in the reconstitution of CCP-mediated nanoclusters and large aggregates. The freezing degree of MC determined the endogenous serum Ca2+ level, which influenced the gastric aggregation behavior of wall MC and ultimately led to a fairly different gastrointestinal release behavior of anthocyanins.

Bigels for controlled gastric release of ascorbic acid: Impact on rheology, texture, thermal stability and antioxidant activity

Ascorbic acid (AA) is a vital nutrient to maintain critical physiological functions but is very sensitive to processing and storage. This can be overcome by using gel-based systems for controlled release of AA. This study compares various gel-based formulations such as hydrogel, emulsion gel, bigel (25 %, 50 %, and 75 % oleogel), and emulsions for thermal stability and delivery of AA, rheological and textural profile, encapsulation efficiency (>97 %), in vitro gastrointestinal release profile, and the corresponding antioxidant profile. An increase in the oleogel content increased the hardness (125 – 216 g) and viscoelastic properties (G′ and G′′) but decreased (76.16 – 25.86 %) the swelling ratio of the bigel. A spontaneous release of AA was witnessed during gastric digestion from emulsion gels (95 %), hydrogels (98 %) and emulsions, whereas a gradual and controlled gastric release of AA could be achieved by bigels. However, a sudden decrease in AA (70 – 80 % reduction) and a spike in dehydroascorbic acid (DHA, oxidized AA) could be observed during intestinal digestion. The bioaccessibility was highest for emulsion gel and bigel (87 %) and lowest for emulsions (70 %). Bigels with higher oleogel content also showed better thermal stability but their physical stability was compromised at higher temperature. The DPPH and ABTS activity was proportional to AA, while FRAP was impacted by both DHA and AA. Thus bigels could be utilised for controlled gastric release of AA with better thermal stability.

Buckwheat (Fagopyrum esculentum) Hulls Are a Rich Source of Fermentable Dietary Fibre and Bioactive Phytochemicals.

Pseudo-cereals such as buckwheat (Fagopyrum esculentum) are valid candidates to promote diet biodiversity and nutrition security in an era of global climate change. Buckwheat hulls (BHs) are currently an unexplored source of dietary fibre and bioactive phytochemicals. This study assessed the effects of several bioprocessing treatments (using enzymes, yeast, and combinations of both) on BHs' nutrient and phytochemical content, their digestion and metabolism in vitro (using a gastrointestinal digestion model and mixed microbiota from human faeces). The metabolites were measured using targeted LC-MS/MS and GC analysis and 16S rRNA gene sequencing was used to detect the impact on microbiota composition. BHs are rich in insoluble fibre (31.09 ± 0.22% as non-starch polysaccharides), protocatechuic acid (390.71 ± 31.72 mg/kg), and syringaresinol (125.60 ± 6.76 mg/kg). The bioprocessing treatments significantly increased the extractability of gallic acid, vanillic acid, p-hydroxybenzoic acid, syringic acid, vanillin, syringaldehyde, p-coumaric acid, ferulic acid, caffeic acid, and syringaresinol in the alkaline-labile bound form, suggesting the bioaccessibility of these phytochemicals to the colon. Furthermore, one of the treatments, EC_2 treatment, increased significantly the in vitro upper gastrointestinal release of bioactive phytochemicals, especially for protocatechuic acid (p < 0.01). The BH fibre was fermentable, promoting the formation mainly of propionate and, to a lesser extent, butyrate formation. The EM_1 and EC_2 treatments effectively increased the content of insoluble fibre but had no effect on dietary fibre fermentation (p > 0.05). These findings promote the use of buckwheat hulls as a source of dietary fibre and phytochemicals to help meet dietary recommendations and needs.