Gas-phase Samples Research Articles

Intrinsic Chemical Drivers of Organic Aerosol Volatility: From Experimental Insights to Model Predictions

AbstractAccurately predicting the volatilities of molecules in aerosols is challenging but crucial for understanding the atmospheric effects of aerosols. We used negative and positive ion electrospray ionization Fourier‐transform ion cyclotron resonance mass spectrometry (FT‐ICR MS) to identify differences in the molecular compositions of gas and particle phase samples from urban atmosphere. We aimed to identify intrinsic chemical parameters that determine and predict the organic aerosol volatility. We found higher average molecular weights, carbon mass percentages, and double bond equivalents (DBE) but lower average O/C ratios and oxygen mass percentages in the particle phase than the gas phase. We identified DBE, which display a significant negative correlation with volatility, as a key parameter. We proposed to improve the previous model for predicting organic aerosol volatility by incorporating DBE as a new variant; and the result showed that this subsequently improved the accuracy of the model, particularly for compounds with minimal or no heteroatoms (0–2) such as hydrocarbons (CH). The revised model offers insights into the contributions of DBE, carbon, nitrogen, oxygen, and sulfur atoms to the volatilities of diverse organic molecules in aerosols and could be applied to improve our understanding of the phase distributions of volatile organic compounds in the ambient air.

Plasmonic chitosan cross-linked dialdehyde chitosan aerogels as 3D surface-enhanced Raman scattering substrates for sensitive and reliable detection

Surface Enhanced Raman Scattering (SERS) has the advantages of non-destructive detection and high sensitivity, however, low hotspots utilisation and inhomogeneous distribution limit its application. In response to the problem of underutilization of hotspots in most SERS substrates, a crosslinking of chitosan with dialdehyde chitosan aerogels loaded with Ag NPs (CDSA) as SERS substrates with chitosan (CS) as the main body and dialdehyde chitosan (DACS) as the reducing and cross-linking agent were prepared. Unlike other 3D structures such as hydrogels, CDSA can capture probe molecules in a much shorter period of time and enhance SERS signals by collapse. The SERS performance of CDSA was evaluated by rhodamine 6 G (R6G) and methylene blue (MB), indicating that the CDSA substrate has good stability (90 days), repeatability (RSD=4.15 %) and reproducibility (RSD=4.86 %). The enhancement factors (EFs) was 1.3×108 for R6G and 9.2×107 for MB. Both gas sample and liquid sample were detected to evaluate the performances of CDSA in practical application. 4-Aminothiophenol (4-ATP) was utilized to test the efficacy of CDSA on gas-phase to-be-tested substances and the limit of detection (LOD) was 0.59 mg/L. The tests performed on sildenafil (SD) in real samples showed recoveries ranging from 97.5 % to 103.4 % with a LOD of 0.055 mg/L. It was indicated that the CDSA substrate could serves as a satisfactory SERS sensor for sensitive and rapid detection for both gas phase and liquid samples.

Near real-time quantification of microbial volatile organic compounds from mycoparasitic fungi: Potential for advanced monitoring and pest control

Microbial volatile organic compounds (MVOCs) are thought to play a key role in the interactions between mycoparasitic fungi, such as the biocontrol agent Trichoderma atroviride (T. atroviride), and their environment. However, the analysis of MVOC emissions from fungal samples is challenging because of low analyte concentrations, typically in the ppbV-range, and the complex chemical nature of biological samples. In a recent study using proton transfer reaction-time of flight-mass spectrometry (PTR-ToF-MS) to determine MVOC emissions from T. atroviride, many product ions were unspecific, as they could arise from a large number of possible analytes. The aim of the present study was to determine whether fast gas chromatography (fast-GC) coupled to PTR-ToF-MS could be used to overcome this issue and constitute a suitable on-line, near real-time method to identify and quantify fungal MVOC emissions in the ppbV-to-ppmV regime. Using gas standards of eleven MVOCs known to be emitted by T. atroviride such as 6-amyl-α-pyrone (6-PP), 2-pentylfuran, 1-octen-3-ol, 2-heptanone, 3-octanone, 2-methyl-1-propanol, 2-pentanone, 3-methyl-1-butanol, 3-methylbutanal, acetone and ethanol, we developed a fast-GC method with a total runtime of 180 s which significantly enhances the analytical specificity of PTR-ToF-MS compared to conventional PTR-ToF-MS without fast-GC separation. Limits of detection were on the order of 0.1–4 ppbV. The increased analytical specificity demonstrated notable benefits, especially for MVOCs having partially overlapping distributions of product ions when analyzed directly using PTR-ToF-MS.In order to demonstrate the applicability of the analytical method, we analysed T. atroviride samples in four biological replicates twice daily over a duration of five days. Using the fast-GC method, nine out of the eleven MVOC species considered in this study in the headspace of T. atroviride could be identified and quantified and their time evolution over the five-day incubation period determined. The measured volume mixing ratios (VMRs) ranged from single-digit ppbV (2-pentylfuran) up to few ppmV (6-PP and ethanol), with the other compounds in the 10-to-100-ppbV range (1-octen-3-ol, 2-heptanone, 2-methyl-1-propanol, 3-methyl-1-butanol, 3-methylbutanal and acetone).Our results suggest that fast-GC-PTR-ToF-MS is a method well-suited for the analysis of gas-phase samples of biological origin, including but not limited to (mycoparasitic) fungi, in a wide range of VMRs from sub-ppbV to few-ppmV.

Wellbore cement alteration and roles of CO2 and shale during underground hydrogen storage

To mitigate climate change and adopt renewable energy, energy storage is crucial and can be done in the form of hydrogen gas (H2). Subsurface geologic reservoirs are positioned to store H2 on the largest scales for the longest terms of all potential options. However, H2 injection may boost reactions that consume hydrogen, generate undesired gases, and alter pore structures of geomedia. To explore the extent of H2-associated biotic reactions at a near wellbore location, four experiments were conducted under underground storage conditions with wellbore cement cores and, in most instances, shale samples submerged in synthetic formation brine. Post-reaction gas, aqueous, and solid phase samples were analyzed using olfactory screening and, later, gas chromatography (GC-MS), inductively coupled plasma optical emission spectroscopy (ICP-OES), scanning electron microscopy (SEM), and synchrotron micro-scale x-ray fluorescence (μ-XRF). Within a period of 16 weeks, hydrogen sulfide (H2S) was generated in systems containing both H2 and shale. XRF mapping identified a zone enriched in iron(II) and reduced sulfur along the rim of cement cross sections that was largely associated with CO2-induced cement carbonation. Shale did not show noticeable alteration, but there is evidence it contributed to the initial inoculation of the system and provided nutrients for microbes via water-rock interactions. This study considers both rock formations and wellbore cement not previously evaluated concurrently. Findings support understanding and modeling of H2-associated biogeochemical reactions during underground hydrogen storage.

Micro-Ring Resonator Assisted Photothermal Spectroscopy of Water Vapor.

We demonstrated, for the first time, micro-ring resonator assisted photothermal spectroscopy measurement of a gas phase sample. The experiment used a telecoms wavelength probe laser that was coupled to a silicon nitride photonic integrated circuit using a fibre array. We excited the photothermal effect in the water vapor above the micro-ring using a 1395 nm diode laser. We measured the 1f and 2f wavelength modulation response versus excitation laser wavelength and verified the power scaling behaviour of the signal.

Preparation of Tautomer-Pure Molecular Beams by Electrostatic Deflection.

Tautomers are ubiquitous throughout chemistry and typically considered inseparable in solution. Yet (bio)chemical activity is highly tautomer-specific, with common examples being the amino and nucleic acids. While tautomers exist in an equilibrium in solution, in the cold environment of a molecular beam the barrier to tautomerization is typically much too high for interconversion, and tautomers can be considered separate species. Here we demonstrate the first separation of tautomers within a molecular beam and the production of tautomerically pure gas-phase samples. We show this for the 2-pyridone/2-hydroxypyridine system, an important structural motif in both uracil and cytosine. Spatial separation of the tautomers is achieved via electrostatic deflection in strong inhomogeneous fields. We furthermore collect tautomer-resolved photoelectron spectra using femtosecond multiphoton ionization. This paves the way for studying the structure-function-dynamic relationship on the level of individual tautomers, using approaches that typically lack the resolution to do so, such as ultrafast dynamics experiments.

Unraveling the ultrafast dynamics of thermal-energy chemical reactions.

In this perspective, we discuss how one can initiate, image, and disentangle the ultrafast elementary steps of thermal-energy chemical dynamics, building upon advances in technology and scientific insight. We propose that combinations of ultrashort mid-infrared laser pulses, controlled molecular species in the gas phase, and forefront imaging techniques allow to unravel the elementary steps of general-chemistry reaction processes in real time. We detail, for prototypical first reaction systems, experimental methods enabling these investigations, how to sufficiently prepare and promote gas-phase samples to thermal-energy reactive states with contemporary ultrashort mid-infrared laser systems, and how to image the initiated ultrafast chemical dynamics. The results of such experiments will clearly further our understanding of general-chemistry reaction dynamics.

Relativistic ultrafast electron diffraction at high repetition rates.

The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments are being developed that are aimed at increasing the beam brightness in order to observe structural signatures, but so far they have been limited to low average current beams. Here, we present the technical design and capabilities of the HiRES (High Repetition-rate Electron Scattering) instrument, which blends relativistic electrons and high repetition rates to achieve orders of magnitude improvement in average beam current compared to the existing state-of-the-art instruments. The setup utilizes a novel electron source to deliver femtosecond duration electron pulses at up to MHz repetition rates for UED experiments. Instrument response function of sub-500 fs is demonstrated with < 100 fs time resolution targeted in future. We provide example cases of diffraction measurements on solid-state and gas-phase samples, including both micro- and nanodiffraction (featuring 100 nm beam size) modes, which showcase the potential of the instrument for novel UED experiments.

Sensing Liquid- and Gas-Phase Hydrocarbons via Mid-Infrared Broadband Femtosecond Laser Source Spectroscopy.

In this study, we demonstrate the combination of a tunable broadband mid-infrared (MIR) femtosecond laser source separately coupled to a ZnSe crystal horizontal attenuated total reflection (ATR) sensor cell for liquid phase samples and to a substrate-integrated hollow waveguide (iHWG) for gas phase samples. Utilizing this emerging light source technology as an alternative MIR radiation source for Fourier transform infrared (FTIR) spectroscopy opens interesting opportunities for analytical applications. In a first approach, we demonstrate the quantitative analysis of three individual samples, ethanol (liquid), methane (gas), and 2-methyl-1-propene (gas), with limits of detection of 0.3% (ethanol) and 22 ppmv and 74 ppmv (methane and isobutylene), respectively, determined at selected emission wavelengths of the MIR laser source (i.e., 890 cm-1, 1046 and 1305 cm-1). Hence, the applicability of a broadband MIR femtosecond laser source as a bright alternative light source for quantitative analysis via FTIR spectroscopy in various sensing configurations has been demonstrated.

Particle and gas phase sampling of PCDD/Fs and dl-PCBs by activated carbon fiber and GC/MS analysis

Polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and polychlorobiphenyls (PCBs) are semi-volatile compounds and can be partitioned in the atmosphere between the gas and particulate phase, due to their physicochemical properties. For this reason, the reference standard methods for air sampling include a quartz fiber filter (QFF) for the particulate and a polyurethane foam (PUF) cartridge for the vapor phase, and it is the classical and most popular sampling method in the air. Despite the presence of the two adsorbing media, this method cannot be used for the study of the gas-particulate distribution, but only for a total quantification. This study presents the results and the performance aim to validate an activated carbon fiber (ACF) filter for the sampling of PCDD/Fs and dioxin-like PCBs (dl-PCBs) using laboratory and field tests. The specificity, precision, and accuracy of the ACF in relation to the QFF + PUF were evaluated through the isotopic dilution technique, the recovery rates, and the standard deviations. Then the ACF performance was assessed on real samples, in a naturally contaminated area, through parallel sampling with the reference method (QFF + PUF). The QA/QC was defined according to the standard methods ISO 16000–13 and -14 and EPA TO4A and 9A. Data confirmed that ACF meets the requirements for the quantification of native POPs compounds in atmospheric and indoor samples. In addition, ACF provided accuracy and precision comparable to those offered by standard reference methods using QFF + PUF, but with significant savings in terms of time and costs.

Influence of ozone and humidity on PTR-MS and GC-MS VOC measurements with and without a Na2S2O3 ozone scrubber

Abstract. The measurement of volatile organic compounds (VOCs) can be influenced by ozone (O3), resulting in sampling artefacts that corrupt the data obtained. Published literature reports both positive (false enhancements of signal) and negative (loss of signal) interference in VOC data due to ozonolysis occurring in the sample gas. To assure good data quality it is essential to be aware of such interfering processes, to characterize them and to try to minimize the impact with a suitable sampling setup. Here we present results from experiments with a sodium thiosulfate ozone scrubber (Na2S2O3), which is a cost-effective and easily applied option for O3 scavenging during gas-phase sampling. Simultaneous measurement of selected organic trace gases using gas chromatography–mass spectrometry and proton transfer reaction–mass spectrometry was performed at different ozone levels (0–1 ppm) and different relative humidities (0 %–80 %). In this way both tropospheric and stratospheric conditions were examined. The measured data show that several carbonyl compounds including acetaldehyde, acetone and propanal show artificial signal enhancement when ozone is present at higher concentrations (&gt; 150 ppb) in dry air, while analytes with double bonds like isoprene (measured with GC-MS) and terpenes show lower signals due to reaction with ozone. Both effects can be eliminated or in the case of sesquiterpenes substantially reduced by using Na2S2O3 impregnated quartz filters in the inlet line. With the chosen scrubbing material, relative humidity (RH) substantially improves the scrubbing efficiency. Under surface conditions between 50 %–80 % RH, the filter allows for accurate measurement of all species examined.

Distribution of polycyclic aromatic hydrocarbons in indoor/outdoor window films and the indoor film/air partition of northeastern Chinese college dormitories

Indoor window films can represent short-term air pollution conditions of indoor environment through rapidly capturing organic contaminants as effective passive air samplers. To investigate the temporal variation, influence factors of polycyclic aromatic hydrocarbons (PAHs) in indoor window films, and the exchange behavior with gas phase in college dormitories, 42 pairs window films of interior and exterior window surfaces and corresponding indoor gas phase and dust samples were collected monthly in six selected dormitories, Harbin, China, from August to December 2019 and September 2020. The average concentration of ∑16PAHs in indoor window films (398 ng/m2) was significantly (p < 0.01) lower than that in outdoors (652 ng/m2). In addition, the median indoor/outdoor ∑16PAHs concentration ratio was close to 0.5, showing that outdoor air acted as a major PAH source to indoor environment. The 5-ring PAHs were mostly dominant in window films whereas the 3-ring PAHs contributed mostly in gas phase. 3-ring PAHs and 4-ring PAHs were both important contributors for dormitory dust. Window films showed stable temporal variation, i.e. PAH concentrations in heating months were higher than those in non-heating months. The atmospheric O3 concentration was the main influence factor of PAHs in indoor window films. PAHs with low molecular weight in indoor window films rapidly reached film/air equilibrium phase within in dozens of hours. The large deviation in the slope of the log KF-A versus log KOA regression line from that in reported equilibrium formula might be the difference between the window film composition and octanol.

Source identification of PCBs in Antarctic air by compound-specific isotope analysis of chlorine (CSIA-Cl) using HRGC/HRMS

Occurrence of persistent organic pollutants (POPs) in the Polar Regions has received great concern in the past several decades due to their long-term adverse effect on biological health in such a fragile environment. However, there is still argument over their source and fate in these pristine areas. Here we attempted to use a novel approach (compound-specific isotope analysis of chlorine, CSIA-Cl) to identify the source of POPs in Antarctic air by comparison with the source area. The results showed that the relative isotope-ratio variation of Cl (δ37Cl′) values showed a large variation from − 137 to 9.04 ‰ in the gas-phase samples, and a significantly negative correlation (p < 0.01) was obtained against the logKoa values of PCBs. There were no significant correlations (p > 0.05) observed between the δ37Cl′ values and meteorological parameters except for PCB-28 which showed temperature dependence. By contrast, the δ37Cl′ values in the urban (Beijing) air ranged from − 12.8 to 2.03 ‰. The larger variation of δ37Cl′ in Antarctic air indicated evidently influence of long-range atmospheric transport (LRAT) on isotopologue fractionation of PCBs. This study may shed light on the application of CSIA-Cl for source identification of chlorinated POPs on a large scale.

Dielectric metasurface-assisted cavity ring-down spectroscopy for thin-film circular dichroism analysis.

Chiral molecules show differences in their chemical and optical properties due to the different spatial arrangements of the atoms in the two enantiomers. A common way to optically differentiate them is to detect the disparity in the absorption of light by the two enantiomers, i.e. absorption circular dichroism (CD). However, the CD of typical molecules is very small, limiting the sensitivity of chiroptical analysis based on CD. Cavity ring-down spectroscopy (CRDS) is a well-known ultrasensitive absorption spectroscopic method for low-absorbing gas-phase samples because the multiple reflections of light in the cavity greatly increase the absorption path. By inserting a prism into the cavity, the optical mode undergoes total internal reflection (TIR) at the prism surface and the evanescent wave (EW) enables the absorption detection of condensed-phase samples within a very thin layer near the prism surface, called EW-CRDS. Here, we propose an ultrasensitive chiral absorption spectroscopy platform using dielectric metasurface-assisted EW-CRDS. We theoretically show that, upon linearly polarized and oblique incidence, the metasurface exhibits minimum scattering and absorption loss, introduces negligible polarization change, and locally converts the linearly polarized light into near fields with finite optical chirality, enabling CD detection with EW-CRDS that typically works with linearly polarized light. We evaluate the ring-down time in the presence of chiral molecules and determine the sensitivity of the cavity as a function of total absorption from the molecules. The findings open the avenue for the ultrasensitive thin film detection of chiral molecules using CRDS techniques.

Ultrafast electron diffraction: Visualizing dynamic states of matter

Understanding the structure and function of both energy and matter is a fundamental goal in science. Various spatiotemporal probes have been developed from electromagnetic waves spanning the entire range of the spectrum to neutrons and charged particles such as electrons. With the development of highly controlled, shorter electron bunches, retrieving dynamic structural information from solid-state and gas-phase samples is now possible at timescales that resolve atomic motion and length scales that resolve atomic positions in even the lightest elements. In this review advances in the generation, manipulation, and characterization of ultrashort electron beams are described.

Environmental and health risk implications of unregulated emissions from advanced biofuels in a Euro 6 engine

The use of conventional and advanced biofuels is part of the efforts to reduce greenhouse gases and harmful exhaust gaseous emissions. This study investigates the unregulated emissions in gas and particles from a Euro 6b diesel engine, operated with four unconventional and advanced biofuels (two hydrogenated terpenic biofuels, a polyoxymethylene dimethyl ether, and a glycerol-derived biofuel), blended with diesel fuel and pure hydrotreated vegetable oil as base biofuel. The engine was operated following WLTC starting from cold-engine conditions. Gas phase samples were collected at each phase of the driving cycle and particulate matter (PM) samples were collected from a dilution tunnel at the end of the driving cycle. A total of 16 PAH and 13 carbonyls were analyzed. In addition, the apoptotic index induced by gas and particle emissions was determined. In the gaseous phase, the total PAH and carbonyl emission factors were higher at the low-speed phase for all fuels. Gas-phase PAH emission factors exceeded particle-bound PAH. Carbonyl emission factors ranged from 0.12 ± 0.012 to 25.3 ± 4.2 mg/km, markedly exceeding gaseous PAH emissions, which ranged from 20.7 ± 1.5 to 51.7 ± 8.9 μg/km. Diesel fuel exhibited the highest carbonyl emissions and its blend with 20% of hydrogenated turpentine exhibited the highest PAH emissions at the end of the WLTC, both due to high emissions at the low-speed phase. Although particle-bound PAH comprise only a small fraction of total PAH emissions, both phases (gas and particles) contributed approximately equal to the toxicity associated with carcinogenic PAH. The apoptotic cells percentage increased in a dose-dependent manner and was significantly higher in cells exposed to gas phase-derived samples. The apoptotic index induced by particulate matter samples did not show a concentration-response effect for any of the fuels.

Vapor-Phase Substrate Nitroreductase Reaction and Its Application as TNT Electrochemical Gas Sensor

Nitroreductase (NTR) is an enzyme that specifically reduces nitroaromatic activity. Some nitroaromatic explosives are exploited by terrorists. Among these highly explosive materials, 2,4,6-trinitrotoluene (TNT) is often used, which makes the detection of TNT an important research topic in the fight against terrorism. TNT vapor detection by gas sensor is an approach that has been under active investigation for several years. Despite this effort, presently, there is limited practical success, in part, due to the ultralow volatility nature of TNT. In this work, we propose an application of the NTR reaction in a hydrogel gas sensor to detect TNT vapor. First, NTR activity in the hydrogel was confirmed by adding TNT and 2,4-dinitrotoluene (DNT) solutions to the NTR-hydrogel sensor conducting cyclic voltammetry (CV) experiments. Then, further CV experiments were carried out with gas phase samples. The CV graphs of NTR-hydrogels detecting vapors containing the explosive substrates and negative controls were compared. Results showed that the signal from the nitroaromatics increased with exposure time, where the TNT signal was the highest of all tested compounds. The gas sensor was sensitive enough to detect TNT gas presented in an ambient air at room temperature.

Theory of rotationally resolved two-dimensional infrared spectroscopy including polarization dependence and rotational coherence dynamics

Two-dimensional infrared (2DIR) spectroscopy is widely used to study molecular dynamics but it is typically restricted to solid and liquid phase samples and modest spectral resolution. Only recently, its potential to study gas-phase dynamics is beginning to be realized. Moreover, the recently proposed technique of cavity-enhanced 2D spectroscopy using frequency combs and developments in multi-comb spectroscopy are expected to dramatically advance capabilities for acquisition of rotationally-resolved 2DIR spectra. This demonstrates the need for rigorous and quantitative treatment of rotationally-resolved, polarization-dependent third-order response of gas-phase samples. In this article, we provide a rigorous and quantitative description of rotationally-resolved 2DIR spectroscopy using density-matrix, time-dependent perturbation theory and angular momentum algebra techniques. We describe the band and branch structure of 2D spectra, decompose the molecular response into polarization-dependence classes, use this decomposition to derive and explain special polarization conditions and relate the liquid-phase polarization conditions to gas-phase ones. Furthermore, we discuss the rotational coherence dynamics during waiting time.

Atmospheric Nitrated Phenolic Compounds in Particle, Gaseous, and Aqueous Phases During Cloud Events at a Mountain Site in North China: Distribution Characteristics and Aqueous‐Phase Formation

AbstractNitrated phenolic compounds in the atmosphere are receiving increasing attention due to their light absorption and biological toxicity. In this study, particulate, gaseous, and cloud water samples were simultaneously collected during cloud events at the summit of Mount Tai in northern China in spring, summer, and winter and the contents of 11 nitrated phenolic compounds were determined. The seasonal average concentrations of the total nitrated phenolic compounds in particles were in the range of 7.3–27.1 ng m−3, a little lower than those measured in the gas‐phase (18.3–70.6 ng m−3). Their concentrations in cloud water were at the levels of 168.4–438.5 μg L−1. 4‐Nitrophenol and nitrosalicylic acids were the dominant compounds in particles, while 4‐nitrophenol and 2,4‐dinitrophenol were the most abundant in the gas phase and cloud water samples. During cloud events, most nitrated phenolic compounds were mainly distributed in the particle phase, except dinitrophenols which were mainly distributed in the gas phase in winter. The field‐derived effective Henry's law coefficients were several orders of magnitude higher than their theoretical values in pure water. Moreover, the measured concentrations of particulate nitrated phenolic compounds were substantially greater than the theoretical predictions, especially in spring. The above results indicate that nitrated phenolic compounds were partly formed via aqueous‐phase reactions inside the cloud droplets or on the wet particle surfaces, which changed their distribution patterns. The much higher ratios of 2,4‐dinitrophenol to the sum of 4‐nitrophenol and 5‐nitrosalicylic acid in cloud water than those in particles further confirm the enhanced formation via aqueous processes.

Picosecond infrared laser driven sample delivery for simultaneous liquid-phase and gas-phase electron diffraction studies.

Here, we report on a new approach based on laser driven molecular beams that provides simultaneously nanoscale liquid droplets and gas-phase sample delivery for femtosecond electron diffraction studies. The method relies on Picosecond InfraRed Laser (PIRL) excitation of vibrational modes to strongly drive phase transitions under energy confinement by a mechanism referred to as Desorption by Impulsive Vibrational Excitation (DIVE). This approach is demonstrated using glycerol as the medium with selective excitation of the OH stretch region for energy deposition. The resulting plume was imaged with both an ultrafast electron gun and a pulsed bright-field optical microscope to characterize the sample source simultaneously under the same conditions with time synchronization equivalent to sub-micrometer spatial resolution in imaging the plume dynamics. The ablation front gives the expected isolated gas phase, whereas the trailing edge of the plume is found to consist of nanoscale liquid droplets to thin films depending on the excitation conditions. Thus, it is possible by adjusting the timing to go continuously from probing gas phase to solution phase dynamics in a single experiment with 100% hit rates and very low sample consumption (<100 nl per diffraction image). This approach will be particularly interesting for biomolecules that are susceptible to denaturation in turbulent flow, whereas PIRL–DIVE has been shown to inject molecules as large as proteins into the gas phase fully intact. This method opens the door as a general approach to atomically resolving solution phase chemistry as well as conformational dynamics of large molecular systems and allow separation of the solvent coordinate on the dynamics of interest.