Galvanostatic Intermittent Titration Research Articles

Improved Electrochemical Performance of NASICON Type Na3V2-xCox(PO4)3/C (x = 0-0.15) Cathode for High Rate and Stable Sodium-Ion Batteries.

In recent years, the Na-ion SuperIonic CONductor (NASICON) based polyanionics are considered pertinent cathode materials in sodium-ion batteries due to their 3D open framework, which can accommodate a wide range of Na content and can offer high ionic conductivity with great structural stability. However, owing to the inferior electronic conductivity, these materials suffer from unappealing rate capability and cyclic stability for practical applications. Therefore, in this work we investigate the effect of Co substitution at the V site on the electrochemical performance and diffusion kinetics of Na3V2-xCox(PO4)3/C (x = 0-0.15) cathodes. All the samples are characterized through Rietveld refinement of the X-ray diffraction patterns, Raman spectroscopy, transmission electron microscopy, etc. We demonstrate improved electrochemical performance for the x = 0.05 electrode with a reversible capacity of 105 mAh g-1 at 0.1 C. Interestingly, the specific capacity of 80 mAh g-1 is achieved at 10 C with retention of about 92% after 500 cycles and 79.5% after 1500 cycles and having nearly 100% Coulombic efficiency. The extracted diffusion coefficient values through the galvanostatic intermittent titration technique and cyclic voltammetry are found to be in the range of 10-9 to 10-11 cm2 s-1. The post-mortem studies show excellent structural and morphological stability after testing for 500 cycles at 10 C. Our study reveals the role of optimal dopant of Co3+ ions at the V site in improving the cyclic stability at a high current rate.

Constructing Multi-Electron Reactions by Doping Mn2+ to Increase Capacity and Stability in K3.2V2.8Mn0.2(PO4)4/C of Phosphate Cathodes for Potassium-Ion Batteries.

Vanadium-based phosphate cathode materials (e.g., K3V2(PO4)3) have attracted widespread concentration in cathode materials in potassium-ion batteries owing to their stable structure but suffer from low capacity and poor conductivity. In this work, an element doping strategy is applied to promote its electrochemical performance so that K3.2V2.8Mn0.2(PO4)4/C is prepared via a simple sol-gel method. The heterovalent Mn2+ is introduced to stimulated multiple electron reactions to improve conductivity and capacity, as well as interlayer spacing. Galvanostatic intermittent titration technique (GITT) and in situ X-ray diffraction results further confirm that Mn-doping in the original electrode can obtain superior electrode process kinetics and structural stability. The prepared K3.2V2.8Mn0.2(PO4)4/C exhibits a high-capacity retention of 80.8% after 1500 cycles at 2 C and an impressive rate capability, with discharge capacities of 87.6 at 0.2 C and 45.4mA h g-1 at 5 C, which is superior to the majority of reported vanadium-based phosphate cathode materials. When coupled K3.2V2.8Mn0.2(PO4)4/C cathode with commercial porous carbon (PC) anode as the full cell, a prominent energy density of 175Wh kg-1 is achieved based on the total active mass. Overall, this study provides an effective strategy for meliorating the cycling stability and capacity of the polyanion cathodes for KIB.

Suppressed O3–P3 phase transition of Cu/Fe/Mn-based layered oxides as cathode materials for high performance sodium-ion batteries

O3-type Cu/Fe/Mn-based layered oxides are regarded as promising cathode materials for sodium-ion batteries due to the abundance of elements in the Earth's crust and the imperative for large-scale energy storage. However, these materials still encounter some challenges, including low capacity and insufficient rate performance. In this study, Al-doped, cobalt-free, and nickel-free Na0.9Cu0.18Fe0.3Mn0.52-xAlxO2 (x = 0, 0.03, 0.05, 0.08) are successfully synthesized by using the solid-state method to introduce non-electrochemically active elements to stabilize the crystal structure and enhance the electrochemical performance. The impact of Al-doping is comprehensively analyzed by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS). Al-doping effectively enhances the diffusion coefficient of Na+, reduces the Jahn-Teller effect caused by Mn3+ and mitigates the transition from O3 to P3 phase. Finally, it stops the partial phase transitions from O3 to P3, which can be found in pristine oxide without Al-doping during charge-discharge cycling. Notably, the Na0.9Cu0.18Fe0.3Mn0.47Al0.05O2 electrode exhibits a reversible capacity of 123.89 mAh g−1 at 0.1 C, a capacity retention rate of 91.1 % after 200 cycles at 1 C, and a discharge capacity of 66.36 mAh g−1 at a high rate of 5 C.

Compensating effect of self-assembled capsule towards enhanced structural stability of prussian blue cathodes for sodium-ion batteries

The Prussian Blue analog (PBA) is a promising sodium-ion cathode material with high theoretical capacity and relatively easy to synthesize. One of the Prussian Blue analogs, sodium manganese hexacyanoferrate (NaxMn[Fe(CN)6], MnHCF), experiences significant initial capacity decrease due to Jahn–Teller distortion depending on the sodium content. In contrast, Sodium copper hexacyanoferrate (NaxCu[Fe(CN)6], CuHCF) exhibits lower reversible sodium-ion content compared to MnHCF and exhibits excellent cycling stability. We designed direct-strike coprecipitation process to synthesize nanocomposite of PBAs. The proposed encapsulated composite has been successfully synthesized by encapsulating MnHCF with self-assembled CuHCF, leading to substantial improvement in the cycling performance of MnHCF. The encapsulated composite demonstrated a capacity of 106.2 mAh g−1 even at high current rate. Regarding cycle stability, it retained over 68 % of its initial capacity even after 500 cycles. The ion conductivity was calculated through the Galvanostatic intermittent titration test (GITT), and the encapsulated composite exhibited higher ion conductivity than pristine MnHCF. Ex-situ post-analysis was conducted to confirm structural evolution of samples. The severe structural collapse of MnHCF led to electrode damage, whereas the encapsulated composite demonstrated excellent electrode condition. The encapsulated composite exhibited superior performance in full-cell tests as well.

Azatriangulenetrione as the Anode Material for Sodium-Ion Batteries: Reversible Redox Chemistry Mediated by Lone Pair Electrons.

Redox-active organic molecules have potential as electrode materials, but their cycling stability is often limited by the irreversible formation of σ-bonds from the radical intermediates. Herein, we present an effective approach to achieve high reversibility by using lone pair electrons to mediate intramolecular radical-radical coupling. Azatriangulenetrione (1) was examined as the anode in sodium-ion batteries, which displayed a reversible four-step, one-electron redox chemistry. In situ electron spin resonance, ex situ Fourier transform infrared/X-ray photoelectron spectroscopy, and density functional theory calculation revealed that the unstable radical anions can couple with each other through the lone pair electrons of the central nitrogen atom, leading to stabilized radical species. Furthermore, scan-rate-dependent cyclic voltammetry measurements and galvanostatic intermittent titration techniques demonstrated that the redox reaction kinetics for radical formation were much faster than the radical paring process. This study offers deep insights into the design of highly reversible organic electrodes.

Novel in-situ encapsulation of tin phosphide particles in MXene conductive networks as anode materials of the durable sodium-ion battery

Sodium-ion battery (SIB) is one of potential alternatives to lithium-ion battery, because of abundant resources and lower price of sodium. High electrical conductivity and long-term durability of MXene are advantageous as the anode material of SIB, but low energy density restricts applications. Tin phosphide possesses high theoretical capacity, low redox potential, and large energy density, but volume expansion reduces its cycling stability. In this study, tin phosphide particles are in-situ encapsulated into MXene conductive networks (SnxPy/MXene) by hydrothermal and phosphorization processes as novel anode materials of SIB. MXene amounts and hydrothermal durations are investigated to evenly distribute SnxPy in MXene. After 100 cycles, SnxPy/MXene reaches high specific capacities of 438.8 and 314.1 mAh/g at 0.2 and 1.0 A/g, respectively. The capacity retentions of 6.0% and 73.6% at 0.2 A/g are respectively obtained by SnxPy and SnxPy/MXene. The better specific capacity and cycling stability of SnxPy/MXene are attributed to less volume expansion of SnxPy during charge/discharge processes and relieved self-stacking of MXene by encapsulating SnxPy particles between MXene layers. Electrochemical impedance spectroscopy and Galvanostatic intermittent titration technique are also applied to analyze the charge storage mechanism in SIB. Higher sodium ion diffusion coefficient and smaller charge-transfer resistance are obtained by SnxPy/MXene.

Towards a scalable production of β-Li3PS4-based all-solid-state batteries: Optimizing pressing parameters of the tape-casted solid electrolyte and composite cathode films

Pressing of all-solid-state batteries (ASSBs) components is one of the most important processes for scalable production. Henceforth, pressing parameters (pressure and temperature) for β-Li3PS4 (β-LPS) solid electrolyte (SE) separator films and LiNi0.6Co0.2Mn0.2 (NCM622)/β-LPS composite cathode films prepared by a slurry-based process were investigated and optimized. Compression of the β-LPS film at a temperature of 100 °C led to higher ionic conductivity than cold-pressed films. Raman and X-ray photoelectron spectroscopic analyses revealed no changes in the chemical nature of β-LPS material after hot pressing. Interestingly, time-of-flight secondary ion mass spectrometric (ToF-SIMS) analyses indicated a binder enrichment in the upper layers of the hot-pressed film. In a similar trend, increasing compression and temperature resulted in higher densification of NCM622/β-LPS composite cathode films. Based on galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) measurements, hot-pressed composite cathode at 200 MPa/100 °C exhibited a higher coverage percent of catholyte on cathode active material and a greater Li+ diffusion coefficient (DLi+) than cold-pressed one at 200 MPa/20 °C. Cycling tests of “Li–In│β-LPS│NCM/β-LPS” ASSBs with hot-pressed films displayed better cycling performance than that with cold-pressed ones, attributed to the higher concentration of electrochemically active NCM in close contact with β-LPS catholyte.

K-Doping Suppresses Oxygen Redox in P2-Na0.67Ni0.11Cu0.22Mn0.67O2 Cathode Materials for Sodium-Ion Batteries.

In P2-type layered oxide cathodes, Na site-regulation strategies are proposed to modulate the Na+ distribution and structural stability. However, their impact on the oxygen redox reactions remains poorly understood. Herein, the incorporation of K+ in the Na layer of Na0.67Ni0.11Cu0.22Mn0.67O2 is successfully applied. The effects of partial substitution of Na+ with K+ on electrochemical properties, structural stability, and oxygen redox reactions have been extensively studied. Improved Na+ diffusion kinetics of the cathode is observed from galvanostatic intermittent titration technique (GITT) and rate performance. The valence states and local structural environment of the transition metals (TMs) are elucidated via operando synchrotron X-ray absorption spectroscopy (XAS). It is revealed that the TMO2 slabs tend to be strengthened by K-doping, which efficiently facilitates reversible local structural change. Operando X-ray diffraction (XRD) further confirms more reversible phase changes during the charge/discharge for the cathode after K-doping. Density functional theory (DFT) calculations suggest that oxygen redox reaction in Na0.62K0.03Ni0.11Cu0.22Mn0.67O2 cathode has been remarkably suppressed as the nonbonding O 2p states shift down in the energy. This is further corroborated experimentally by resonant inelastic X-ray scattering (RIXS) spectroscopy, ultimately proving the role of K+ incorporated in the Na layer.

Determination of Sodium Ion Diffusion Coefficient in Tin Sulfide@Carbon Anode Material Using GITT and EIS Techniques

The electroanalytical behavior of SnSx (x = 1, 2) encapsulated into a carbon phase was studied using the galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS). These techniques are widely utilized in battery systems to investigate the diffusion of alkali metal cations in anode and cathode materials depending on the concentration of ions in the host material. Here, we report different calculation methods showing how the applied model affects the derived diffusion coefficient. The calculated value of the apparent chemical diffusion coefficient of sodium ions (DNa+) is in the range of 1 × 10−10 to 1 × 10−15 cm2/s depending on the technique, mathematical protocol, geometry of the electrode material, and applied potential.

Engineering FeSe2 encapsulated within carboxymethylcellulose-derived porous carbon for enhanced surface reaction kinetics in Li-ion half/full battery anodes

Encapsulation of transitional metal selenides within the porous nanocarbon network has been regarded as a highly advantageous strategy for improving anode performance in terms of capacity, cycle-to-cycle stability, and operational durability for Li+ storage. Herein, a mildly sol-gel process and in-situ self-transformation strategy were employed to fabricate FeSe2 encapsulated within eco-friendly carboxymethylcellulose (CMC)-derived porous carbon, achieving a feasible capacity and relatively durable structure. The FeSe2@PC anode with square-built Li+/e− diffusion pathway exhibits a comparatively high reversible capacity of up to 758 mAh g−1 at 0.1 A g−1 and relatively good cycling stability, with a capacity retention of 83% after 500 cycles at 1 A g−1 in half cells. Furthermore, FeSe2@PC//LiMn2O4 full cells also demonstrate relatively outstanding electrochemical performance when paired with a LiMn2O4 cathode. The nanoconfinement electrode configuration, featuring interconnected external/internal carbon shell/FeSe2 nanoparticles, not only provides good electrical conductivity and buffering capacity for volume changes but also facilitates electrolyte infiltration and surface/near-surface interactions between electroactive FeSe2 and Li+. Kinetic analysis through cyclic voltammetry, galvanostatic intermittent titration technique, and electrochemical impedance spectroscopy indicates exceptional Li+/e− transport kinetics. Employing green and eco-friendly materials in energy storage is crucial for advancing sustainable energy technologies, and the engineered FeSe2@PC nanocomposite demonstrated in this study offers promising potential towards this objective.

Production of Sulphur-Doped Graphene Oxide as an Anode Material for Na-Ion Batteries

Sodium-ion batteries have been the focus of interest in recent years due to abundance and cost-effectiveness of sodium resources globally as opposed to lithium. In this work, sulfur-doped graphene oxide (SGO) was synthesized using a straightforward, one-step, cost-effective, and eco-friendly chronoamperometric method at room temperature. The resulting powder was then utilized as active anode material for Na-ion batteries. The surface of the synthesized SGO powder, which consists of approximately three layers with 19 sp2 hybridized carbon rings and a domain size of about 50 nm, is covalently doped with –C-SOx-C- (x = 2,3) groups. The deduced diffusion coefficient from electrochemical impedance spectroscopy and galvanostatic intermittent titration technique measurements for SGO as anode in NIBs is in the range of 10−11–10−12 cm2.s−1. At 0.1 C rate, the initial discharge capacity recorded 256.7 mAh.g−1 at 0.1 C rate. In addition, the capacity retention for long-term cycling of 100 cycles at 2 C rate was 99.85%. The unique structure of SGO allows us to achieve satisfactory anode performance in capacity and rate capability, with potential for further enhancement.

Unraveling the Intrinsic Origin of the Superior Sodium-Ion Storage Performance of Metal Selenides Anode in Ether-Based Electrolytes.

Metal selenides show outstanding sodium-ion storage performance when matched with an ether-based electrolyte. However, the intrinsic origin of improvement and deterministic interface characteristics have not been systematically elucidated. Herein, employing FeSe2 anode as the model system, the electrochemical kinetics of metal selenides in ether and ester-based electrolytes and associated solid electrolyte interphase (SEI) are investigated in detail. Based on the galvanostatic intermittent titration technique and in situ electrochemical impedance spectroscopy, it is found that the ether-based electrolyte can ensure fast Na+ transfer and low interface impedance. Additionally, the ether-derived thin and smooth double-layer SEI, which is critical in facilitating ion transport, maintaining structural stability, and inhibiting electrolyte overdecomposition, is concretely visualized by transmission electron microscopy, atomic force microscopy, and depth-profiling X-ray photoelectron spectroscopy. This work provides a deep understanding of the optimization mechanism of electrolytes, which can guide available inspiration for the design of practical electrode materials.

Unveiling the bifunctional roles of Cetyltrimethylammonium bromide in construction of Nb2CTx@MoSe2 heterojunction for fast potassium storage

Exploring robust electrode materials which could permit fast and reversible insertion/extraction of large K+ is a crucial challenge for potassium-ion batteries (PIBs). Smart interfacial design could facilitate electron/ion transport as well as assure the integrity of electrode. Herein, Cetyltrimethylammonium bromide (CTAB) was found to play bifunctional roles in construction of Nb2CTx@MoSe2 heterostructure. Firstly, functionalization of CTAB on the surface of Nb2CTx could influence the subsequent growth of MoSe2 by electrostatic effect, stereochemical effect and the synergetic Lewis acid-base interaction, leading to the formation of Nb2CTx@MoSe2 with tiled heterostructure. Secondly, the interlayer spacing of Nb2CTx was expanded from 0.77 to 1.21 nm owing to the pillar effect of CTAB. As excepted, the capacity retention was 80 % from 100 mA g−1 (406 mA h g−1) to 1000 mA g−1 concerning rate capability and the specific capacity maintained at 240 mA h g−1 (at 2000 mA g−1) over 300 cycles. The calculated DK values from Galvanostatic intermittent titration technique (GITT) measurement of the titled C-T-Nb2CTx@MoSe2@C electrode is two orders of magnitude larger than the traditional T-Nb2CTx@MoSe2@C electrode, further confirming intimate interface between MoSe2 and Nb2CTx could provide convenient potassium-ion transport channels and fast diffusion kinetics. Finally, ex-situ characterizations at different charging and discharging voltage stages, including ex-situ XRD/Raman/HRTEM/XPS have been carried out to reveal the potassium storage mechanism. This work provides a facile strategy for the regulation of interface engineering by the assist of CTAB which could extend to other MXenes-TMDs (Transition metal dichalcogenides) hybrid electrodes.

Industrial-Scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage.

Given the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium-ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in-situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g-1 at 8 A g-1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical battery with excellent cycle behaviors. Such facile approach can provide guidance for large-scale production of high-performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

Industrial‐Scale Hard Carbon Designed to Regulate Electrochemical Polarization for Fast Sodium Storage

AbstractGiven the merits of abundant resource, low cost and high electrochemical activity, hard carbons have been regarded as one of the most commercializable anode material for sodium‐ion batteries (SIBs). However, poor rate capability is one of the main obstacles that severely hinder its further development. In addition, the relationships between preparation method, material structure and electrochemical performance have not been clearly elaborated. Herein, a simple but effective strategy is proposed to accurately construct the multiple structural features in hard carbon via adjusting the components of precursors. Through detailed physical characterization of the hard carbons derived from different regulation steps, and further combined with in‐situ Raman and galvanostatic intermittent titration technique (GITT) analysis, the network of multiple relationships between preparation method, microstructure, sodium storage behavior and electrochemical performance have been successfully established. Simultaneously, exceptional rate capability about 108.8 mAh g−1 at 8 A g−1 have been achieved from RHC sample with high reversible capacity and desirable initial Coulombic efficiency (ICE). Additionally, the practical applications can be extended to cylindrical battery with excellent cycle behaviors. Such facile approach can provide guidance for large‐scale production of high‐performance hard carbons and provides the possibility of building practical SIBs with high energy density and durability.

Core-Shell Si@SiOC Particles Synthesized Using Supercritical Carbon Dioxide Fluid for Superior Li-Ion Storage Performance.

A supercritical carbon dioxide (SCCO2) fluid, characterized by gas-like diffusivity, near-zero surface tension, and excellent mass transfer properties, is used as a precursor to produce silicon oxycarbide (SiOC) coating. SCCO2 disperses and reacts with Si particles to form an interfacial layer consisting of Si, O, and C. After an 850°C annealing process, a conformal SiOC coating layer forms, resulting in core-shell Si@SiOC particles. High-resolution transmission electron microscopy and its X-ray line-scan spectroscopy, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy, are used to examine the SiOC formation mechanism. Effects of SCCO2 interaction time on the SiOC properties are investigated. The SiOC layer connects the Si@SiOC particles, improving electron and Li+ transport. Cyclic voltammetry, galvanostatic intermittent titration technique, and electrochemical impedance spectroscopy are employed to examine the role of SiOC during charging/discharging. Operando X-ray diffraction data reveal that the SiOC coating reduces crystal size of the formed Li15Si4 and increases its formation/elimination reversibility during cycling. The Si@SiOC electrode shows a capacitiy of 2250 mAh g-1 at 0.2 A g-1. After 500 cycles, the capacity retention is 72% with Coulombic efficiency above 99.8%. A full cell consisting of Si@SiOC anode and LiNi0.8Co0.1Mn0.1O2 cathode is constructed, and its performance is evaluated.

Enhanced electrochemical performance of a LiFePO4 cathode with an environmentally friendly pectin/polyethylene glycol binder

The advancement of lithium-ion battery technology relies on the development of materials that not only improve performance but also align with environmental sustainability. This work presents a novel water-based pectin-PEG binder for LiFePO4 cathodes that combines eco-friendliness with electrochemical innovation. The binder material is made by mixing pectin, a flexible natural substance, with polyethylene glycol through a radical copolymerization process. This combination gives the binder both flexibility and a boost in electrical performance. Our experimental results demonstrate that LFP cathodes with this binder have an intriguing self-healing ability in comparison with the conventional PVDF binder, enhanced charge-discharge capacities, improved cycling stability, and higher ionic conductivity. Specifically, electrodes utilizing the pectin-PEG binder exhibit an impressive retention of discharge capacity. They maintain roughly 150 mAh g−1 after 500 cycles at 1C with 99% retention, and about 141 mAh g−1 with 97% retention at 3C. Cyclic voltammetry (CV) confirms that the PP binder maintains its ionic diffusion properties at high sweep rates, whereas galvanostatic intermittent titration technique reveals a much higher lithium ion diffusion coefficient (DLi+) within the operational voltage range of the LFP-PP250 electrodes. These findings establish an attractive direction for the development of electrodes for high-energy density, sustainable lithium-ion batteries.

Effect of replacing titanium with zirconium on the solubility of lithium in the LixZryTi1-yS2 system.

Solid solutions of ZryTi1-yS2 (y = 0.1, 0.2) compositions have been synthesized. The electrochemical introduction of lithium is carried out by the galvanostatic intermittent titration technique. An isothermal section of the phase diagram of the LixZryTi1-yS2 system at room temperature has been constructed. The limiting solubility of lithium in solid solutions decreases with an increasing amount of titanium substituted for zirconium. It was noted that at low lithium concentrations (x < 1), there is no change in the E(x) dependence when titanium is replaced by zirconium. This may indicate the formation of separate TiS2 and ZrS2 layers.

Increasing the interlayer spacing and generating closed pores to produce petroleum coke-based carbon materials for sodium ion storage

Petroleum coke (PC) is a valuable precursor for sodium-ion battery (SIB) anodes due to its high carbon content and low cost. The regulation of the microcrystalline state and pore structure of the easily-graphitized PC-based carbon is crucial for creating abundant Na+ storage sites. Here we used a precursor transformation strategy to increase the carbon interlayer spacing and generate abundant closed pores in PC-based carbon, significantly increasing its Na+ storage capacity in the plateau region. This was achieved by introducing a large number of oxygen functional groups through mixed acid treatment and then using high-temperature carbonization to decompose the oxygen functional groups and rearrange the carbon microcrystallites, resulting in a transition from open to closed pores. The optimized samples provide a large reversible capacity of 356.0 mAh g−1 at 0.02 A g−1, of which approximately 93% is below 1.0 V. Galvanostatic intermittent titration (GITT) and in-situ X-ray diffraction (XRD) analysis indicate that the sodium storage capacity in the low voltage plateau region involves a joint contribution of interlayer insertion and closed pore filling processes. This study presents a comprehensive method for the development of high-performance carbon anodes using low-cost and highly aromatic precursors.

Modelling Li-V2O5 Batteries Using Galvanostatic Intermittent Titration Technique and Electrochemical Impedance Spectroscopy: Towards Final Applications

Given the relevance of lithium and post-lithium batteries as electrochemical energy storage systems, the peculiar crystalline structure of V2O5 and its doping capacity play key roles in lithium-ion battery technology. To integrate them in high-efficiency modules, systematic methodologies are required to estimate the state of charge in a reliable way and predict the Li-V2O5 battery’s performance according to their electrochemical phenomena, including two plateaus in the galvanostatic cycling curves and the dynamic behavior governed by the energy demand. Most state of charge estimation and battery modeling procedures are focused on conventional Li-batteries that show a unique plateau. In this work, we propose a systematic methodology based on the galvanostatic intermittent titration technique and electrochemical impedance spectroscopy to study battery performance in the time and frequency domains, respectively. The proposed methodology, with a time–frequency correlation, promotes a deeper understanding of the electrochemical phenomena and general behavior of Li-V2O5 batteries, allowing for its subsequent extrapolation to more complex and higher-capacity lithium and post-lithium batteries used in high-power applications with a minimum error.