Fuzzy Observer Research Articles

Event-Triggered Adaptive Finite-Time Control Using a Fuzzy State Observer for Nonlinear Cyber-Physical Systems Under Deception Attacks.

This article presents a new event-triggered adaptive finite-time control strategy using a fuzzy state observer for a class of nonlinear cyber-physical systems (CPSs) under malicious deception attacks with a more general form. Compared with the traditional assumptions on the deception attacks in the existing results, a more general assumption on deception attacks is given in this article. During the design process, real system states are initially estimated by developing an improved state observer, which effectively addresses the problem of state unavailability. Then, a coordinate transformation technology, in which the estimated states of observer are considered, is presented to stabilize the studied system. By constructing the singularity-free finite time virtual controls, the singularity problem in the traditional finite time design algorithms is cleverly avoided. Furthermore, to minimize communication overhead, a final finite-time controller is established by using a relative threshold event-triggered scheme. The developed event-triggered adaptive finite-time control strategy guarantees that all signals in the closed-loop system are semi-globally bounded in finite time without Zeno behavior. Finally, the correctness of the proposed control strategy is validated through two simulation results.

A Closed-Form Solution to Observer Design Problem for Ostensible Metzler Takagi-Sugeno Systems

This paper addresses the state estimation problems related to the generalized fuzzy observer design for ostensible Metzler Takagi-Sugeno (T-S) systems. Attention is focused on design constraints for the concept of diagonal stabilization and positivity of observer gain matrices. On the basis of some new interpretations, the parameterizations of ostensible Metzler T-S fuzzy systems is presented, which opens the way to the solution of the design problem using only the principle of linear matrix inequalities. The same approach is intended to ensure the stability of the dynamics of the estimation error. The presented method extends and generalizes the results that have been presented in the literature so far.

Practical consensus of T-S fuzzy positive multi-agent systems using linear programming

This paper presents the practical consensus of T-S fuzzy positive multi-agent systems with interval type-1 and type-2 fuzzy sets using observer-based control protocols. A fuzzy positive observer is first constructed for the systems. An observer-based fuzzy control protocol is designed, where an additional constant term is introduced. Some linear programming conditions are established to achieve the positivity of the original system and its observer. Then, the practical consensus of the original system is transformed into the stability of a dynamic system, where a set of new variables is defined by combining the constant term and the states of the agents. In the first step, the positivity of the new variables is guaranteed. In the second step, the stability of the dynamic system consisting new variables is addressed by using a fuzzy copositive Lyapunov function. The gain matrices of observer and control protocols are formulated based on a matrix decomposition approach. All positive and consensus conditions are described via linear programming. Finally, two examples are provided to verify the validity of the obtained results.

Design of extended dissipative-based composite anti-disturbance reliable tracking control for stochastic Takagi–Sugeno fuzzy systems

This study focuses on examining the issues of extended dissipative-based composite anti-disturbance reliable tracking control for stochastic Takagi–Sugeno fuzzy systems afflicted by sensor faults and multiple disturbances. Explicitly, the multiple disturbances include the autonomous Wiener process and non random noises with partly known information that are generated by an exogenous plant. To address the difficulty of estimating the non random disturbance while considering the partially known information, the study incorporates a fuzzy stochastic disturbance observer. Furthermore, to solve the output tracking issue of the system under consideration, a modified repetitive tracking control is implemented. Then, combining the methodologies of disturbance observer-based control technique with modified repetitive control, a composite anti-disturbance reliable tracking control strategy is developed for achieving the intended tracking goal despite the multiple disturbances and sensor faults encountered. Additionally, the proposed approach involves extended dissipativity scheme, which includes H ∞ , passivity, dissipativity, and L 2 − L ∞ performances in a unified framework. In particular, by employing Lyapunov–Krasovskii functional approach, the essential stability criteria for the proposed closed-loop system are articulated in the form of linear matrix inequalities. Additionally, numerical illustrations are presented to exemplify the application and efficiency of the developed control protocol.

Quantization-Based Adaptive Fuzzy Consensus for Multiagent Systems Under Sensor Deception Attacks: A Novel Compensation Mechanism.

This study mainly investigates the adaptive leader-following consensus tracking control problem for a class of nonlinear multiagent systems (MASs) subjected to unknown control directions, external disturbances, and sensor deception attacks. To start with, an equivalent MAS with known control directions is obtained by introducing a linear state transformation. For the purpose of estimating the unavailable system states caused by malicious attacks, a quantization-based fuzzy state observer is designed, and the fuzzy-logic system (FLS) is utilized to approximate nonlinear functions. Moreover, a dynamic uniform quantizer with scaling function is established to reduce information transmission. With the help of coordinate transformation and available compromised states, a novel compensation mechanism is designed to offset the influence of filter errors while avoiding the problem of "explosion of complexity" in the backstepping design process. In addition, the Nussbaum-type function is considered to eliminate the design obstacle of unknown control gains resulting from the attacks. Under the constructed consensus protocol, it is proved theoretically that the consensus tracking error converges to an adjustable small neighborhood of the origin, and all signals in the closed-loop system are bounded. Finally, the feasibility of the provided secure control scheme is verified through two simulation examples.

Dual-channel event-triggered prescribed performance adaptive fuzzy time-varying formation tracking control for nonlinear multi-agent systems

This paper is concerned with the problem of dual-channel event-triggered prescribed performance adaptive fuzzy time-varying formation tracking control for multi-agent systems subject to actuator saturation, in which state variables are unmeasurable and nonlinear functions are totally unknown. A fuzzy state observer is constructed to estimate unmeasurable states. Meanwhile, fuzzy logic systems are used to approximate unknown nonlinear functions. To effectively save the usage of communication resources, this paper designs both sensor output signal and control signal triggering mechanisms, respectively. Unfortunately, the output triggering can lead to a problem that virtual control laws are non-differentiable. To solve this problem, we first utilize observer output signals to construct virtual control laws to ensure the first-order differentiation of virtual control laws. Then, a dynamic filtering technology is introduced to avoid the repeated differentiation of virtual control laws. Furthermore, an improved first-order auxiliary system is designed to compensate for the impact of actuator saturation. It is shown that the designed controller can guarantee tracking errors steer to a preset accuracy within a prescribed settling time, and all signals in the closed-loop system are semi-globally uniformly ultimately bounded. Finally, simulation results verify the effectiveness of the developed control scheme.

A study and analysis of input output linearization control of permanent magnet synchronous motor based on fuzzy observer

A study and analysis of input output linearization control of permanent magnet synchronous motor based on fuzzy observer

Integrated Fault-Tolerant Control Design With Sampled-Output Measurements for Interval Type-2 Takagi-Sugeno Fuzzy Systems.

This article is concerned with the integrated design of fault estimation (FE) and fault-tolerant control (FTC) for uncertain nonlinear systems suffering from actuator faults and external disturbance. The uncertain nonlinear systems are characterized as the interval type-2 (IT2) Takagi-Sugeno (T-S) fuzzy model, and IT2 membership functions are employed to effectively handle uncertainties. A fuzzy observer, utilizing only sampled-output measurements, is applied to simultaneously estimate actuator faults and system states. Based on the estimation, the fault-tolerant controller is designed to ensure the system stability under a predefined H∞ performance. The sampling behavior complicates the system dynamics and makes the integrated FTC design more challenging. To confront this issue, the discontinuous Lyapunov functional technique is exploited to enhance stability results by considering the sampling characteristic, upon which FE and FTC units are co-designed in the linear matrix inequality (LMI) framework. To further relax stability criteria, the analysis process incorporates the bound information of membership functions through the membership-function-dependent (MFD) method. Additionally, the relationship of mismatched premise variables resulting from the sampling scheme is also taken into account. Moreover, considering the imperfect premise matching (IPM) framework, the proposed fault-tolerant controller provides greater flexibility in selecting the shapes of membership functions and number of fuzzy rules that can vary from the counterpart of the fuzzy system. Finally, the efficacy of the proposed FTC technique is validated through a detailed numerical example.

Fuzzy disturbance observer-based fuzzy swing suppression control of a ‘mooring-heavy lift crane-cargo’ coupled system

In this paper, an adaptive fuzzy disturbance observer (FDO)-based control is proposed for the swing suppression of the mooring-heavy lift crane (HLC)-cargo system in the presence of a wave disturbance. First, the dynamic model of the HLC system is determined by employing the Lagrangian method, and the wave force is modeled as an exosystem with unknown terms based on the Jonswap spectrum. Then, based on the HLC model and the wave force exosystem, an FDO is established to determine the wave disturbances, and a fuzzy approximator is developed to estimate the unknown terms. A novel disturbance estimation error observer is first developed to facilitate the parameter adaptive updating law. Subsequently, by augmenting the HLC system and disturbance estimation error system, an FDO-based fuzzy antiswing control method is proposed in terms of the linear matrix inequality technique to suppress the swing. The closed-loop system stability is examined by using the Lyapunov method. Finally, the effectiveness of the proposed method is validated by numerical simulation.

Fuzzy system reliability analysis based on new aging indexes

The concept of aging plays an important role in reliability analysis. The aim of this paper is providing the novel method to definition aging indexes based on fuzzy random variables and using the concept of α-pessimistic in both parametric and non-parametric approaches. In parametric approach, the concepts of survival function, hazard rate function and mean residual function were extended for fuzzy random variables. After that, we obtain and analyse these indexes for fuzzy exponential and fuzzy two-parameter Weibull distributions as two frequently used lifetime distribution in reliability theory. Moreover, with the assumption that the distribution of fuzzy observations is unknown (non-parametric approach), first an estimate for the fuzzy distribution function is presented, and then an estimate for the aging indices of the system is investigated. To do this, the concept of fuzzy empirical distribution function is investigated as an estimator of cumulative distribution function. Moreover, some properties of investigated estimator have been established.

A semi-active adaptive pneumatic vibration isolator based on frequency response analysis and nonlinear control

In this work, an adaptive nonlinear error feedback controller based on fuzzy state observer is proposed to a novel rubber pneumatic vibration isolator (PVI) system. First, a novel rubber PVI system is designed and developed. Harmonic balance method is applied to establish the dynamic model of the PVI system, so as to analyze the frequency response characteristics of the system. Second, to improve the PVI performance in low-frequency vibration, a nonlinear state error feedback control system based on fuzzy state observer is designed for the active PVI system. Furthermore, the experiment system is established. Finally, through the experimental comparison under 5 Hz, 7 Hz, 20 Hz, and 40 Hz, an adaptive PVI strategy is proposed. The experimental results demonstrate that the adaptive PVI shows better performance in vibration isolation.

Fuzzy observer based adjustable containment control for multi-agent systems against DoS attacks

Fuzzy observer based adjustable containment control for multi-agent systems against DoS attacks

A novel approach to decentralized sampled‐data fuzzy observer design for nonlinear interconnected systems

AbstractThis paper presents the decentralized sampled‐data fuzzy observer design technique for nonlinear interconnected systems based on the Takagi–Sugeno fuzzy model. The interconnected system is considered that the subsystems include uncertain interconnections and are not needed to satisfy stable conditions. Based on the continuous‐time Lyapunov functional approach, the observer design technique is proposed to minimize the interconnection bound to attenuation degree ratio and formulated into the linear matrix inequality formats. Finally, by simulation example, it shows the validity and superiority of the proposed observer design technique.

Fuzzy Fault Detection Observer Design for Unmanned Marine Vehicles Based on Membership-Function-Dependent H∞/H_ Performance

This paper studies the design problem of fault detection (FD) observer for unmanned marine vehicles (UMVs) based on the T-S fuzzy model. Firstly, T-S fuzzy systems are used to approximate the nonlinear dynamics in UMVs. Secondly, to improve the FD performance of UMVs, a new H∞/H_ performance index, which depends on the membership functions, is defined. Then, based on the membership-function-dependent H∞/H_ performance index, a new fuzzy FD observer strategy, where the fuzzy submodels are not all required to be with the same H_ performance index, is developed to detect the sensor fault in UMVs; the corresponding synthesis conditions of the FD observer are derived based on the Lyapunov theory. Different from the conventional FD strategies, in the proposed membership-function-dependent FD method, the fuzzy submodels—which the system always works on—can have a larger H_ performance index, such that the performance of the FD can be improved. In the end, an example is given to show the effectiveness of the presented method.

Sensorless robot collision detection based on fuzzy momentum observer

During physical human–robot interaction, unwanted collisions occur, which also threaten human safety. That is why different collision detection algorithms are proposed for safe collaboration between human and robots. The current detection methods are model-based methods without using additional sensors. However, the estimation of the collision force using a model-based method still has the problem of an unavoidable trade-off between the collision sensitivity and the reduction of the peaking value, and, in addition, the immunity to the model uncertainties. In this paper, an improved momentum observer using fuzzy system is proposed for robot collision detection. First, to avoid using the robot’s inverse inertia matrix, the generalized moment state equations based on the robot’s dynamics are deduced. Second, the extended linear momentum observer is built based on robot generalized momentum equations. Third, a fuzzy system is designed to select an appropriate bandwidth for the observer. In the design of this fuzzy system, the estimation error is considered as a fuzzy input, and the observer’s bandwidth is considered as its output. This fuzzy generalized momentum observer (FGMO) is compared with the existing generalized moment observers (GMOs) and has been proven its ability to overcome the mentioned above issues due to its ability to intelligently adjust the online filter parameters during the observation process. Finally, simulations are conducted with a 6-degree-of-freedom (6-DOF) industrial robot manipulator, and the obtained results illustrate the effectiveness of proposed approach in term of sensitivity and peaking value.

Observer-based adaptive fuzzy control of stabilized platform in rotary steerable system with input saturation and output constraint

This paper explores the control strategy for toolface tracking in the stabilized platform of a rotary steerable system, considering both input saturation and output constraint. To mitigate the impact of unknown friction torque and modeling error on the stabilized platform, we propose an adaptive fuzzy backstepping control approach. A fuzzy state observer is specifically devised to handle the uncertain state arising from unknown friction torque and modeling errors. Introducing an auxiliary system effectively compensates for input saturation, and the resolution of the output error constraint is achieved through the construction of a barrier Lyapunov function. Furthermore, employing the Lyapunov method establishes that all signals in the entire closed-loop control system are semi-globally uniformly ultimately bounded. Simulation results confirm the efficacy of the proposed control methodology.

Simplified LMI Conditions for Takagi-Sugeno Fuzzy Observer Design with Unmeasured Premise Variables

Simplified LMI Conditions for Takagi-Sugeno Fuzzy Observer Design with Unmeasured Premise Variables

Indirect adaptive observer control (I-AOC) design for truck–trailer model based on T–S fuzzy system with unknown nonlinear function

Tracking is a crucial problem for nonlinear systems as it ensures stability and enables the system to accurately follow a desired reference signal. Using Takagi–Sugeno (T–S) fuzzy models, this paper addresses the problem of fuzzy observer and control design for a class of nonlinear systems. The Takagi–Sugeno (T–S) fuzzy models can represent nonlinear systems because it is a universal approximation. Firstly, the T–S fuzzy modeling is applied to get the dynamics of an observational system in order to estimate the unmeasurable states of an unknown nonlinear system. There are various kinds of nonlinear systems that can be modeled using T–S fuzzy systems by combining the input state variables linearly. Secondly, the T–S fuzzy systems can handle unknown states as well as parameters known to the indirect adaptive fuzzy observer. A simple feedback method is used to implement the proposed controller. As a result, the feedback linearization method allows for solving the singularity problem without using any additional algorithms. A fuzzy model representation of the observation system comprises parameters and a feedback gain. The Lyapunov function and Lipschitz conditions are used in constructing the adaptive law. This method is then illustrated by an illustrative example to prove its effectiveness with different kinds of nonlinear functions. A well-designed controller is effective and its performance index minimizes network utilization—this factor is particularly significant when applied to wireless communication systems.

Takagi-Sugeno fuzzy sampled-data observer design for nonlinear permanent magnet synchronous generator-based wind turbine systems using auxiliary function-based integral inequality technique

This study focuses on designing the fuzzy sampled-data observer (FSDO) scheme for nonlinear permanent magnet synchronous generator (PMSG)-based wind turbine systems (WTS). The primary objective of this problem is to solve an unmeasurable state problem under the mismatched premise variables conditions among system, observer, and controller, respectively. To do this, firstly, the proposed wind turbine model is described in a Takagi-Sugeno fuzzy model due to the complex nonlinearities in PMSG-based WTS. Next, based on the measured output signals and sampled estimated states, the FSDO is designed to understand some unmeasurable state variables of the studied system. Then, a novel auxiliary function-based integral inequality (AFBII) is presented to approximate the integral quadratic terms related to sampling information. Thanks to the proposed AFBII technique and the introduction of slack variables, several new and less conservative stability requirements are derived in the formulations of linear matrix inequalities (LMIs) using the looped Lyapunov function. Finally, the simulation studies for the considered wind turbine model are validated numerically, and then some comparative results are provided to show the superiority and applicability of the theoretical observations.

Adaptive fuzzy controller design for an air handling unit

An adaptive control method based on a fuzzy state observer is designed for air handling unit (AHU) systems, where the intensity of humidity source and heat load are considered to be uncertain, and approximated by fuzzy logics. Besides, the supply air temperature is unmeasurable, which is observed by a state observer. To avoid the system equilibrium point offset, the prediction errors generated by the system and serial-parallel estimation models are introduced into the controller design based on backstepping. Finally, the superiority of proposed adaptive fuzzy controller is analyzed by simulation comparison with feedback linearization and PID controllers in two cases.