Decay Fungi Research Articles

Predicting fungal infection sensitivity of sepals in harvested tomatoes using imaging spectroscopy and partial least squares discriminant analysis

Tomatoes ( Solanum lycopersicum L.) are a widely grown and globally traded vegetable, essential for both local consumption and international trade. However, approximately 30% of harvested tomato yields are lost due to fungal decay during postharvest handling. Timely disease identification is crucial to prevent such losses, but certain tomato varieties exhibit higher susceptibility to fungal infections than others. Additionally, there are variations in susceptibility among individual sepals, with unknown underlying causes. Traditional methods for assessing fungal presence in plants have limitations, such as sample destruction and a focus on symptom detection rather than evaluating susceptibility to fungal infection. Hence, there is a demand need for an accurate, non-destructive method capable of predicting susceptibility to fungal infection. The use of hyperspectral imaging (HSI) with chemometrics presents a pioneering approach to address this need. In this study, three tomato cultivars (‘Brioso,’ ‘Cappricia,’ and ‘Provine’) were studied. Hyperspectral images were captured on day-1 of harvest, followed by controlled fungal growth conditions. Ground truth assessments were conducted by three experts on day-3 and day-4, averaging severity scores assigned per sepal. The methodology involved extracting spectra from HSI images and calibrating and validating models using partial least squares discriminant analysis (PLSDA), aiming to optimize model parameters for accurate predictions. The models were categorized into those developed using data from a single variety (intravariety) and those utilizing data from multiple varieties combined (global models). The best-performing intravariety model was established using the Cappricia variety, achieving a balanced accuracy of 0.84. Conversely, a global model combining Cappricia and Provine varieties achieved a balanced accuracy of 0.70. Overall, the results suggest that distinguishing between more and less susceptible sepals is feasible under controlled conditions.

White and brown rot fungal decay resistance of epoxy composite modified with nanocellulose and tetraethoxysilane

The resistance of epoxy composite modified with nanocellulose and tetraethoxysilane (TEOS) to decay by white rot (Trametes versicolor) and brown rot (Coniophora puteana) fungi was investigated using EN 113 (1996) as the guideline. The objective of this study was to investigate the effect of TEOS as a cross-linked agent in epoxy/nanocellulose composite, and its resistance against white rot and brown rot fungi. The epoxy resin was mixed with 10 wt% nanocellulose. The other three sets were prepared the same, but with the addition of 1%, 2%, and 3% TEOS for each set. All types of epoxy composites were air dried in a mold at ambient temperature for seven days followed by oven drying at 80 °C for 30 min. The composites were oven dried at 103 °C, sterilized, and exposed to the fungi at 22 °C for 16 weeks. It was found that the use of 1% to 3% TEOS in the composite reduced the percent weight loss following decay by T. versicolor, but not in the case of C. puteana. Overall, all types of the composite in this study were classified as highly durable and durable against the T. versicolor and C. puteana respectively. The surface and structure of all types of composites were still intact after 16 weeks of exposure period.

Assessment of the biological durability of oil palm trunk modified with 1,3-dimethylol-4,5-dihydroxy-ethyleneurea (DMDHEU) following subsequent curing at elevated temperatures

The biological durability of oil palm trunk modified with 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) was tested after subsequent curing at elevated temperatures. The resistance against mold, decay fungi, and subterranean termites was examined. Dimethylol dihydroxyethyleneurea-modified OPT demonstrated improved resistance against mold and decay fungi; however, the effect was lesser on subterranean termite attacks. Oil palm trunk modified with 34% DMDHEU and cured at 160 °C exhibited the most effective reduction in mass loss due to biological degradation compared to the untreated controls. High curing temperature (> 180 °C) caused cracks and ruptured the cell walls, exposing the untreated zone of the OPT to biological attack. As a non-biocidal wood modification, homogeneous dispersion of DMDHEU with adequate concentration and curing temperature is important to fully prevent OPT degradation by wood-destroying fungi and termites. These results provide valuable information for technologists to enhance or streamline the experimental design of combined modification with DMDHEU and thermal treatment, supporting their practical goals. It is recommended to continue research on the leaching of DMDHEU-modified OPT to understand the prevailing effect of DMDHEU on the biological durability of OPT, whether it is due to cross-linking or filler dispersion.

Control of fungal diseases of tomato (<i>Lycopersicum esculentum</i> Mill) fruits using various plant extracts

Plant harmful fungi induce symptoms of illnesses that significantly impair the quantity and quality of tomato (Lycopersicum esculentum) yields. The high-water composition of tomatoes renders it highly vulnerable to fungal decay. These fungi, responsible for the decay of tomatoes, generate mycotoxins that pose serious risks to human health. Thus, this research goal is to separate, characterize, and classify the fungi linked with the decline of tomato produce sold across four markets in Mkpat Enin and Ikot Abasi Local Government Areas of Akwa Ibom State, Nigeria. Among the fungal pathogens extracted from afflicted tomato fruits were Fusarium moniliformes, Rhizopus stolonifera, and Aspergillus alternata. Different concentrations of the extracts were individually introduced into Potato Dextrose Agar media. The fungal pathogens were at that point individually introduced into the media and left to incubate for 7 days. Findings revealed that P < 0.05 suppressed the mycelial evolution of the fungal pathogens at a greater concentration tested, with the extent of inhibition varying among different extracts. The results concerning the proportion inhibition of plant extracts on different fungus indicated that, at concentrations ranging from 40% to 80%, ethanolic extracts derived from Cola acuminata and Zingiber officinale significantly (p<0.05) restrained the growth of F. moniliformes, R. stolonifera, and A. alternata. Specifically, the ethanolic leaf extract of C. acuminata demonstrated moderate inhibition on A. alternata at 60%, while the ethanolic extract of Zingiber officinale exhibited low inhibition on F. moniliformes at 40%. At a concentration of 60% in ethanolic extracts, F. moniliformes experienced the greatest inhibition among the plant extracts, whereas A. alternata displayed the least inhibition. Pathogenicity testing indicated that Aspergillus alternata exhibited the largest decay of 25mm in diameter in a healthy tomato fruit, while Rhizopus stolonifera had the smallest decay diameter. Thus, to cover the ledge life of tomato fruits, therefore there’s adequate need to implement proper handling techniques and utilize adequate storage facilities.

Physico-mechanical properties and decay fungi resistance of Dendrocalamus asper and Bambusa spinosa thermally modified in spent engine oil medium

This study examined the effects of thermal modification (TM) using spent engine oil as the heat transfer medium on the physico-mechanical properties and decay resistance of Bambusa spinosa Roxb. and Dendrocalamus asper (Schult. & Schult.f.) Backer. The TM process was conducted at three temperatures (140, 160 and 180 °C) and three durations (30, 60 and 90 minutes), coded as T1 to T9. The tests followed ASTM D 143–94 and ASTM D 2017–05 standards. The results revealed that thermally modified bamboo samples exhibited noticeable aesthetic colour changes, with a gradual darkening towards brown, and significantly improved dimensional stability, demonstrated by reductions in water absorption (27–75 %), thickness swelling (25–89 %), and equilibrium moisture content (31–64 %) compared with control samples. However, a decrease in flexural strength was observed at the highest temperature and longest duration (T9: 180 °C for 90 min), with reductions of 54–56 %. Despite this decrease in mechanical strength, the decay resistance of the T9-treated samples was comparable to chemically preserved bamboo, classifying them as highly resistant to decay fungi. Overall, the study demonstrated that spent engine oil is an effective medium for the thermal modification of bamboo when conducted in a controlled temperature setting.

Positive effects of yeast soluble cell wall polysaccharide on fruit postharvest control through resistance response

Yeast-derived cell wall polysaccharides possess numerous biological activities, but their application in postharvest preservation is rarely reported. The aim of this research was to investigate the effects of Kluyveromyces marxianus soluble cell wall polysaccharide (SCWP) on preventing the infection of Penicillium expansum in pear fruit. The results showed that K. marxianus SCWP treatment could significantly improve the resistance of pear fruit to P. expansum, with respect to Saccharomyces cerevisiae-derived SCWP. Composition of both SCWPs was mannan with the main chains consisting of a → 6)-α-D-Manp-(1 → unit and the branch structure formed by → 2)-α-D-Manp-(1 except that K. marxianus SCWP took on a shorter side chain and a rougher surface than S. cerevisiae SCWP. In addition, mechanisms of K. marxianus SCWP on stimulating resistance response were associated with the apparent oxidative burst, increased gene expression and enzyme activity of antioxidant and defense systems in pear fruit. Our findings suggest that K. marxianus SCWP can be used as an innovative and promising candidate for preventing postharvest fungal decay and extending fruit shelf life.

Characteristics of Fast-Growing Wood Impregnated Using Monoethylene Glycol and SiO Nanoparticles Against Fungal Attacks

Jabon (Anthocephalus cadamba) and Sengon (Falcataria moluccana) were fast-growing wood species widely planted in the community forest. Both kinds of wood have low durability even though they can potentially be used in the carpentry material industry. Therefore, this research aimed to analyze the vacuum-pressure impregnation effect using monoethylene glycol (C2H6O2) or MEG and silica dioxide (SiO2) nanoparticles on wood resistance to fungal decay. The results showed that impregnation treatment with MEG and SiO2 nanoparticles significantly improved the durability of Jabon and Sengon against fungal attacks. Furthermore, MEGSiO2 with 24-hour polymerization had a better impact on durability compared to both the control and MEGSiO2 with 12-hour polymerization. The 24-hour polymerization using 1% SiO2 nanoparticles resulted in the lowest weight loss for Jabon (5.86% ) and Sengon (5.21%). In addition, the variation of SiO2 nanoparticle concentration did not significantly affect the weight loss and durability of Jabon and Sengon against fungal decay.

Extending Raspberry Shelf Life and Maintaining Postharvest Quality with CO2 Atmospheres

Raspberry (Rubus idaeus L.) fruit are known for their extremely short shelf life. Decay, leakiness, and loss of firmness are the most common limiting factors contributing to their short storage life. However, storage in elevated CO2 and reduced O2 atmospheres can delay senescence in fruit by reducing softening, respiration and ethylene production rates, and pathogen growth. In this study, raspberries were exposed to four different CO2 atmospheres—15 kPa CO2 and 6 kPa O2 (15 kPa); 8 kPa CO2 and 13 kPa O2 (8 kPa); 5 kPa CO2 and 16 kPa O2 (5 kPa); or 0.03 kPa CO2 and 21 kPa O2 (0.03 kPa)—and were evaluated for their postharvest quality periodically during two weeks of storage in 2020 and 2021. Raspberry fruits kept in a 15 kPa CO2 atmosphere followed by 8 kPa CO2 had higher firmness, brighter red color, and the least fungal decay or leakiness. In all atmospheres, the total anthocyanin content increased over time, although the rate of increase was slowed by high CO2. The raspberries’ visual attributes deteriorated over time in all atmospheres, but high CO2 atmospheres slowed the rate of deterioration. After five days, the quality of air-stored raspberries was significantly degraded, while the raspberries stored in elevated CO2 maintained good quality for up to ten days.

Mapping pathogenic fungi in decayed Norway spruce stands: Insights from harvester positional data

Abstract Root and butt rot caused by pathogenic fungi in the genera Heterobasidion and Armillaria is a pressing issue in managed Norway spruce forests. The disease results in financial losses for the forest owners and reduces the volume of wood that can be used in long‐lived products. Pathogenic wood decay fungi spread either with the aid of airborne spores or via mycelial growth among neighbouring trees, the latter leading to clustering (tendency of decayed trees to be in close proximity relative to their neighbouring trees) of decay‐affected trees in forests. Understanding the spatial patterns of the decay‐affected trees at the forest stand level is vital for designing management strategies to address this problem. We examined decay clustering in 273 clear‐cut Norway spruce stands in Norway using harvester‐recorded data on spatial occurrence of decayed and healthy Norway spruce trees. We tested clustering using three global‐cluster tests that account for population density and distribution, evaluating clustering without identifying specific cluster locations. The proportions of clustered and non‐clustered stands differed depending on the statistical test used for clustering assessment, resulting in overall agreement of 32.8% for clustered and 36.9% for non‐clustered. Clustered stands exhibited a median cluster distance (maximum distance between the decay‐affected trees within a cluster) of 12 m (Inter‐Quantile Range, IQR, 6–20 m) and a median of 6 (IQR 3–16) nearest neighbour trees (number of decayed trees forming a cluster), estimates comparable with prior studies focused on assessment of trees infected by mycelial spread of the same fungal individual. The decay incidence in the clustered stands was 16.24%, while the non‐clustered stands had a butt‐rot incidence of 20.97%. In clustered stands the average number of trees per hectare was higher (693) than in non‐clustered stands (553). Synthesis and applications: Our study demonstrates that Norway spruce stands display a diverse range of spatial patterns of butt rotted trees. We found that higher densities of Norway spruce trees probably facilitate the vegetative spread of pathogenic wood decay fungi, leading to clustering of decay‐affected trees. To disrupt the spread of decay fungi between tree generations, precision planting of trees other than Norway spruce around infested stumps of prior generation trees has been recommended by earlier studies. We discussed the potential of using harvester‐derived geoposition data for butt‐rotted trees upon planning and execution of forest regeneration.

Decay hazard of wood exposed in-ground in changing climates in Germany

ABSTRACT The ability to identify locations that have a high risk of fungal decay is important for service life planning and analysing changes in risk can help inform scenarios where climate change may shift some areas into states that are more suitable for decay. The ERA5-Land database was used to obtain soil moisture and temperature data, which was applied in a dose–response model for in-ground wood decay. Dose was used as an indicator of decay risk and to produce hazard maps over Germany for the past two climate normals (1963–1992 and 1993–2022). There was an increase of 3.16 dose days over Germany. Brandenburg and Mecklenburg-Vorpommern, had the highest decay risk in both climate normals and southern states experienced the lowest decay risk. In Germany, larger dose increases were seen in central to southern latitude regions and mid to high altitudes. With further climate change, conditions that are most suitable for in-ground wood decay may shift to locations that previously did not experience such risk. It is important to be informed of the durability requirements of wood products in areas where increased resistance may be required.

Evaluation of Fungal Decay and Biodegradation of Thermoplastic Composites Reinforced with Date Palm Fibres

Evaluation of Fungal Decay and Biodegradation of Thermoplastic Composites Reinforced with Date Palm Fibres

Comparison of the Characteristics of Baekak(chalk) and Hobun(shell) Pigment for Dancheong based on Natural Raw Materials

Calcium carbonate white pigments were manufactured by classifying them into Baekak(chalk) and Hobun(Shell) according to the type of natural raw material, and their material characteristics were analyzed. Their performances were compared by evaluating their weather resistance, antifungal activity, and flame retardancy. The main components of Baekak pigments are calcite and dolomite, and those of Hobun pigments a re calcite and a ragonite. Depending on the raw material, the specific factors identified are Mg from the mineral composition of Baekak pigments, and P and S from the protein composition of Hobun pigments. The particle shape of the pigment shows a crystal structure unique to minerals in the case of Baekak pigments, but the Hobun pigments are classified into plate-shaped or columnar structures depending on the raw material and are in an aggregated state with a large specific surface area. While the absorption amount of Baekak pigments made from limestone and dolomite is similar, that of Hobun pigments shows differences depending on the raw material, with the absorption amount being high in the order of oyster > cockle > clam. As a result of the color analysis, both the Baekak and the Hobun pigments had L* values of over 90 and opacity of over 90, indicating good whiteness and painting workability. As a result of the accelerated weathering test, the final color difference value(ΔE) was less than 2.02, which was difficult to recognize with the naked eye, and the Hobun pigment showed superior color and film stability compared to the Baekak pigment. As a result of the antifungal test, all calcium carbonate-based white pigments showed high preventive effects against decay fungi, and among them, the pigment made from clams and cockles showed excellent antiseptic properties. In addition, the pigment made from clams and cockles has been shown to have flame retardant properties, and it is expected that it will contribute to enhancing the preservation of organic cultural heritage when applied to it.

Effect of alkali treatment and fungal degradation on the nanostructure and cellulose arrangement in Scots pine cell walls – A neutron and X-ray scattering study

Research on new conservation treatments for historical wood requires considerable amounts of appropriate wood material, which is hard to acquire. Thus, we produced biologically and chemically degraded model wood that could be used as a representative material in future research on consolidating agents. Using chemical composition determinations, we found that fungal decay targeted mainly polysaccharides, while alkaline treatment mostly reduced hemicelluloses and lignin content. X-ray and neutron scattering showed that all decayed samples had increased disorder in microfibril alignment and larger elementary fibril cross-sections, and alkaline-treated samples had much larger elementary fibril spacing compared to those decayed by fungi. These nanoscale and chemical differences correlate with physical property changes. For example, decreased cellulose crystallinity and increased disorder of the microfibrils in degraded cell walls likely contribute to the lower elastic moduli measured for these cell walls. The obtained data improves understanding of how degradation alters wood structures and properties across length scales and will be valuable for future studies focusing on archeological wood. Moreover, it leads to the conclusion that it is more appropriate to develop treatments that consider not only spatial variability and degree of wood degradation but also the corresponding molecular and nanoscale changes in the cell walls.

Reticulate evolution and rapid development of reproductive barriers upon secondary contact in a forest fungus

Reproductive barriers between sister species of the mushroom-forming fungi tend to be stronger in sympatry, leading to speculation on whether they are being reinforced by selection against hybrids. We have used population genomic analyses together with invitro crosses of a global sample of the wood decay fungus Trichaptum abietinum to investigate reproductive barriers within this species complex and the processes that have shaped them. Our phylogeographic analyses show that T.abietinum is delimited into six major genetic groups: one in Asia, two in Europe, and three in North America. The groups present in Europe are interfertile and admixed, whereas our crosses show that the North American groups are reproductively isolated. In Asia, a more complex pattern appears, with partial intersterility between subgroups that likely originated independently and more recently than the reproductive barriers in North America. We found pre-mating barriers in T.abietinum to be moderately correlated with genomic divergence, whereas mean growth reduction of the mated hybrids showed a strong correlation with increasing genomic divergence. Genome-wide association analyses identified candidate genes with programmed cell death annotations, which are known to be involved in intersterility in distantly related fungi, although their link here remains unproven. Our demographic modeling and phylogenetic network analyses fit a scenario where reproductive barriers in Trichaptum abietinum could have been reinforced upon secondary contact between groups that diverged in allopatry during the Pleistocene glacial cycles. Our combination of experimental and genomic approaches demonstrates how T.abietinum is a tractable system for studying speciation mechanisms.

Pre-harvest foliar spraying of calcium and zinc preserves berries quality and mitigates chilling injury of grape during cold storage

The current study was conducted to elucidate the effect of single and combined post-veraison sprays of calcium nitrate (Ca, 2 %) and zinc sulfate (Zn, 1 %) on post-harvest quality attributes of ‘Sahebi’ grapes during cold storage. Grapes foliar-sprayed with combination of Ca and Zn showed higher flavonols (28 % myricetin, 4 % quercetin, and 15 % kaempferol), flavanols (6 % catechin, 29 % epicatechin, and 10 % epi‑gallocatechin) and anthocyanins (21 % malvidin, 16 % cyaniding and 13 % peonidin, 22 % petunidin) than controls. Moreover, Ca and Zn foliar application was also effective in preserving the levels of trans-resveratrol and phenolic acids in grape berries. The higher amount of phenolic compounds in Ca + Zn-treated grapes was accompanied with higher activity of antioxidant enzymes, lower activity of polyphenol oxidase, and lower incidence of fungal decay. In general, post veraison spray of Ca and Zn is promising viticultural operation for preserving berries bioactive compound and mitigating chilling injury of grape during cold storage.

Occurrence and Characteristics of Serpula himantioides Fruiting Bodies on Living Trees in Japan.

Serpula himantioides is a globally distributed wood decay fungus that causes heartwood decay in several tree species. We investigated the occurrence of S. himantioides fruiting bodies in Japan for two years and six months to characterize their biology. The fruiting bodies matured in autumn and occurred on living Chamaecyparis pisifera, Chamaecyparis obtusa, Larix kaempferi, and Cryptomeria japonica trees, as well as on dead trees and soil. Assessing three circular plots, the incidence of living trees with S. himantioides fruiting bodies was lowest in the plot with the most advanced heartwood decay. Furthermore, fruiting bodies occurred more frequently in the lower slope direction of the trunk. Analysis using the pair correlation function suggested that the spatial distribution pattern of living trees with fruiting bodies may change from intensive to random with heartwood decay progress. Finally, according to generalized linear and generalized linear mixed models, which were used to investigate the factors affecting the development of fruiting bodies in C. pisifera, C. obtusa, and L. kaempferi, no clear relationship was found between the presence or absence of fruiting bodies and heartwood decay. Thus, we suggest that fruiting bodies can occur in healthy living trees as well as in living trees in the early stages of heartwood decay.

Evaluating low pressure storage for prolonging the postharvest life of blueberries

Low pressure storage (LPS) is a postharvest technology that has shown the potential to extend the storage life of various horticultural commodities. LPS addresses core postharvest challenges, such as desiccation, decay and senescence by creating an environment that maintains fully saturated air (i.e., high relative humidity) and ultra-low oxygen (ULO) conditions that can reduce respiration rates and suppress fungal growth. In this study, LPS chambers were evaluated for their ability to extend the storage life of blueberries (Vaccinium corymbosum L., cv. ‘Draper’), compared to regular atmosphere (RA), across four different storage locations in the Pacific Northwest, USA. In three of the four locations, blueberries were field picked and loaded by hand, while at one location, fruit was loaded through mechanical harvesters. Following two weeks of storage, LPS chambers reduced blueberry respiration rates by 47 % from initial to lowest point, on average. Vacuum chambers filled with machine harvested fruit exhibited respiration rates 28 % higher than chambers with hand harvested fruit, although still sustained rates lower than at the initial loading (i.e., harvest). After five to eight weeks of storage, LPS chambers sustained nearly no weight loss, while fruit stored under RA conditions demonstrated weight loss between 2 and 7 % in the same period. LPS fruit was firmer, exhibited less incidence of superficial mold and fungal decay and better maintained titratable acidity than RA fruit. LPS chambers, when field loaded by hand, demonstrate significant potential in maintaining the at-harvest quality and condition of blueberries for up to eight weeks postharvest. Under these conditions, LPS can extend the storability of blueberries for eight weeks or more. Further investigation is required to determine the compatibility of extended LPS on machine harvested blueberries and with other commercially relevant cultivars.

Evaluation of the Potentials of Tobacco Waste Extract as Wood Preservatives against Wood Decay Fungi

Utilizing conventional wood preservatives poses potential risks to ecosystems and human health. Therefore, the wood protection industry must develop alternatives that are both efficient and environmentally friendly. In this paper, industrial tobacco waste extracts were used as eco-friendly wood preservatives against wood decay fungi. Three major constituents in the extracts were identified via gas chromatography-mass spectrometry (GC-MS) and included nicotine, neophytadiene, and 2,7,11-cembratriene-4,6-diol. The antifungal activities of waste tobacco extracts and these three major constituents against wood decay fungi were tested. At a concentration of 40 mg/mL, the tobacco waste extract treated with 50% ethanol significantly inhibited the activity of wood decay fungi. This was because the extract contained nicotine as the primary active component and neophytadiene as a synergistic active component. Wood decay resistance tests were conducted on Pinus yunnanensis and Hevea brasiliensis treated with a 50% ethanol extract of tobacco waste at a concentration of 40 mg/mL. The mass losses of Pinus yunnanensis exposed to G. trabeum and T. versicolor were 4.11% and 5.03%, respectively, while the mass losses in Hevea brasiliensis exposed to G. trabeum and T. versicolor were 7.85% and 9.85%, respectively, which were classified as highly resistant. The acute ecotoxicity of the tobacco waste extract was assessed using a kinetic luminescent bacteria test with Aliivibrio fischeri, which revealed significantly lower acute toxicity than a commercial copper-based wood preservative. This study offers insights into high-value utilization of tobacco waste and advancement of natural wood preservatives.

Exploring the use of extended multiplicative scattering correction for near infrared spectra of wood with fungal decay

Extended Multiplicative Signal Correction (EMSC) is a multivariate linear modelling technique for multi-channel measurements that can identify and correct for different types of systematic variation patterns, known or unknown. It is typically used for pre-processing to separate light absorbance spectra, obtained by diffuse reflectance of intact samples, into three main sources of variation: additive variations due to chemical composition (≈Beer's law), mixed multiplicative and additive variations due to physical light scattering (≈Lambert's law) and more or less random measurement noise. The present work evaluates the use of EMSC to pre-process near infrared spectra obtained by hyperspectral imaging of Scots pine sapwood, inoculated with two different basidiomycete fungi and at various degradation stages. The spectral changes due to fungal decay and resulting mass loss are assessed by interpretation of the EMSC parameters and the partial least squares regression (PLSR) results. Including a cellulose (analyte) or bound water (interferent) spectral profile in the EMSC pre-processing model generally improves the predictive performance of the PLS modelling, but it can also make it worse. The inclusion of the additional polynomial baselines does not necessarily lead to a better separation of the physical and chemical effects present in the spectra. The estimated EMSC parameters provide insight into the differences in decay mechanisms. A detailed analysis of the EMSC results highlights advantages and disadvantages of using a complex pre-processing model.

Phytomelatonin: From Intracellular Signaling to Global Horticulture Market.

Melatonin (N-acetyl-5-methoxytryptamine), a well-known mammalian hormone, has been having a great relevance in the Plant World in recent years. Many of its physiological actions in plants are leading to possible features of agronomic interest, especially those related to improvements in tolerance to stressors and in the postharvest life of fruits and vegetables. Thus, through the exogenous application of melatonin or by modifying the endogenous biosynthesis of phytomelatonin, some change can be made in the functional levels of melatonin in tissues and their responses. Also, acting in the respective phytomelatonin biosynthesis enzymes, regulating the expression of tryptophan decarboxylase (TDC), tryptamine 5-hydroxylase (T5H), serotonin N-acetyltransferase (SNAT), N-acetylserotonin O-methyltransferase (ASMT), and caffeic acid O-methyltransferase (COMT), and recently the possible action of deacetylases on some intermediates offers promising opportunities for improving fruits and vegetables in postharvest and its marketability. Other regulators/effectors such as different transcription factors, protein kinases, phosphatases, miRNAs, protein-protein interactions, and some gasotransmitters such as nitric oxide or hydrogen sulfide were also considered in an exhaustive vision. Other interesting aspects such as the role of phytomelatonin in autophagic responses, the posttranslational reprogramming by protein-phosphorylation, ubiquitylation, SUMOylation, PARylation, persulfidation, and nitrosylation described in the phytomelatonin-mediated responses were also discussed, including the relationship of phytomelatonin and several plant hormones, for chilling injury and fungal decay alleviating. The current data about the phytomelatonin receptor in plants (CAND2/PMTR1), the effect of UV-B light and cold storage on the postharvest damage are presented and discussed. All this on the focus of a possible new action in the preservation of the quality of fruits and vegetables.