Fung-type Strain-energy Function Research Articles

3D biomechanical properties of the layered esophagus: Fung-type SEF and new constitutive model.

Most current studies on the passive biomechanical properties of esophageal tissues directly use the exponential strain energy function (SEF) to fit and calculate the constants of the constitutive equation. In the context of the extensive application of exponential SEF, in-depth research on the exponential SEF is still lacking. The purpose of this study is to combine the exponential function with the polynomial SEF to obtain the most suitable constitutive equation to describe the three-dimensional passive behavior of the esophagus. fresh pig esophagus with a length of 13cm in the middle position was selected as esophageal samples. The esophageal sample was separated into muscular layer and mucosal layer with surgical scissors. Stretch-inflation mechanical tests of the intact esophagus, esophageal muscular, and esophageal mucosa were carried out on a triaxial test machine. The external radius, axial force, and internal pressure were recorded simultaneously. The seven-parameter Fung-type SEF and several new SEFs combining polynomials and exponents were used to fit the experimental data curves. The stretch-inflation test data and the morphometric parameters at the zero-stress state of the layered esophagus were obtained. The new SEF with polynomial and exponential combination is more suitable to describe describing the three-dimensional passive biomechanical properties of esophageal tissue. Among them, New-Fung13 SEF is more suitable for describing the passive biomechanical properties of intact esophageal tissue, Sokolis-Fung13 SEF is more suitable for the esophageal muscle layer, and New-Fung10 SEF is more suitable for the esophageal mucosa. The constitutive parameters of the optimal constitutive model for each layer of the esophagus were obtained.

Comparison of Biomechanical Properties and Microstructure of Trabeculae Carneae, Papillary Muscles, and Myocardium in the Human Heart.

Trabeculae carneae account for a significant portion of human ventricular mass, despite being considered embryologic remnants. Recent studies have found trabeculae hypertrophy and fibrosis in hypertrophied left ventricles with various pathological conditions. The objective of this study was to investigate the passive mechanical properties and microstructural characteristics of trabeculae carneae and papillary muscles compared to the myocardium in human hearts. Uniaxial tensile tests were performed on samples of trabeculae carneae and myocardium strips, while biaxial tensile tests were performed on samples of papillary muscles and myocardium sheets. The experimental data were fitted with a Fung-type strain energy function and material coefficients were determined. The secant moduli at given diastolic stress and strain levels were determined and compared among the tissues. Following the mechanical testing, histology examinations were performed to investigate the microstructural characteristics of the tissues. Our results demonstrated that the trabeculae carneae were significantly stiffer (Secant modulus SM2 = 80.06 ± 10.04 KPa) and had higher collagen content (16.10 ± 3.80%) than the myocardium (SM2 = 55.14 ± 20.49 KPa, collagen content = 10.06 ± 4.15%) in the left ventricle. The results of this study improve our understanding of the contribution of trabeculae carneae to left ventricular compliance and will be useful for building accurate computational models of the human heart.

Biomechanical behavior and histological organization of the three-layered passive esophagus as a function of topography

The zero-stress state of the mucosa-submucosa and two muscle esophageal layers has been delineated, but their multi-axial response has not, because muscle dissection may not leave tubular specimens intact for inflation/extension testing. The histomechanical behavior of the three-layered porcine esophagus was investigated in this study, through light microscopic examination and uniaxial tension, with two-dimensional strain measurement in pairs of orthogonally oriented specimens. The two-dimensional Fung-type strain-energy function described suitably the pseudo-elastic tissue response, affording faithful simulations to our data. Differences in the scleroprotein content and configuration were identified as a function of layer, topography, and orientation, substantiating the macromechanical differences found. In view of the failure and optimized material parameters, the mucosa-submucosa was stronger and stiffer than muscle, associating it with a higher collagen content. A notable topographical distribution was apparent, with data for the abdominal region differentiated from that for the cervical region, owing to the existence of inner muscle with a circumferential arrangement and of outer muscle with a longitudinal arrangement in the former region, and of both muscle layers with oblique arrangement in the latter region, with thoracic esophagus being a transition zone. Tissue from the mucosa-submucosa was stronger and stiffer longitudinally, relating with a preferential collagen reinforcement along that axis, but more extensible in the orthogonal axis.

Multiaxial mechanical behaviour of the passive ureteral wall: experimental study and mathematical characterisation

There is a scarcity of data regarding the mechanical properties of the ureter, although this would facilitate our understanding of its physiology and pathophysiology, and the development of suitable biomaterials for replacement. There is hence an urgent need for multiaxial experimental data and methodical constitutive formulations, which we aim at presenting through this report. The zero-stress state of wall tissue, serving as the starting geometry for biomechanical analyses, was accordingly determined and the 3D passive behaviour of ureteral specimens, isolated from healthy rabbits, was studied under a physiologic range of finite inflation and longitudinal extension. Two most-commonly employed descriptors of soft tissue behaviour were chosen to fit the material response: the Fung-type strain–energy function (SEF) and its combination with a quadratic function. Both SEFs were tested in the thick-walled setting, with incompressibility enforced explicitly or via a Lagrange multiplier. The deformational response of the ureter exhibited an exponential and not the sigmoidal dependency on pressure that requests implementation of two-term SEFs. Indeed, the four-parameter Fung-type SEF resulted in reasonable fit of both the external radius and longitudinal force vs. lumen pressure data, and fitting accuracy was not improved when attempting the seven-parameter Fung-type or biphasic SEFs. There were also serious over-parameterisation problems with those models, favouring the implementation of the SEF with the smallest number of parameters. The material parameters optimised revealed significant mechanical anisotropy, with longitudinal properties being stiffer than circumferential ones under equibiaxial stress states. We conclude that ureter displays a nonlinear anisotropic mechanical response that is well-characterised by the four-parameter Fung-type SEF.

Biomechanical response of ascending thoracic aortic aneurysms: association with structural remodelling

Ascending thoracic aortic aneurysms (ATAA) were resected from patients during graft replacement and non-aneurysmal vessels during autopsy. Tissues were histomechanically tested according to region and orientation, and the experimental recordings reduced with a Fung-type strain–energy function, affording faithful biomechanical characterisation of the vessel response. The material and rupture properties disclosed that ATAA and non-aneurysmal aorta were stiffer and stronger circumferentially, accounted by preferential collagen reinforcement. The deviation of microstructure in the right lateral region, with a longitudinal extracellular matrix and smooth muscle element sub-intimally, reflects the regional differences in material properties identified. ATAA had no effect on strength, but caused stiffening and extensibility reduction, corroborating our histological observation of deficient elastin but not collagen content. Our findings may serve as input data for the implementation of finite element models, to be used as improved surgical intervention criteria, and may further our understanding of the pathophysiology of ATAA and aortic dissection.

Deformations and End Effects in Isolated Blood Vessel Testing

Blood vessels are commonly studied in isolation to define their mechanical and biological properties under controlled conditions. While sections of the wall are sometimes tested, vessels are most often attached to needles and examined in their natural cylindrical configuration where combinations of internal pressure and axial force can be applied to mimic in vivo conditions. Attachments to needles, however, constrain natural vessel response, resulting in a complex state of deformation that is not easily determined. As a result, measurements are usually limited to the midsection of a specimen where end effects do not extend and the deformation is homogeneous. To our knowledge, however, the boundaries of this uninfluenced midsection region have not been explored. The objective of this study was to define the extent of these end effects as a function of vessel geometry and material properties, loading conditions, and needle diameter. A computational fiber framework was used to model the response of a nonlinear anisotropic cylindrical tube, constrained radially at its ends, under conditions of axial extension and internal pressure. Individual fiber constitutive response was defined using a Fung-type strain energy function. While quantitative results depend on specific parameter values, simulations demonstrate that axial stretch is always highest near the constraint and reduces to a minimum in the uninfluenced midsection region. Circumferential stretch displays the opposite behavior. As a general rule, the length of the region disturbed by a needle constraint increases with the difference between the diameter of the needle and the equilibrium diameter of the blood vessel for the imposed loading conditions. The reported findings increase the understanding of specimen deformation in isolated vessel experiments, specifically defining considerations important to identifying a midsection region appropriate for measurement.

Strain-energy function and three-dimensional stress distribution in esophageal biomechanics

Knowledge of the transmural stress and stretch fields in esophageal wall is necessary to quantify growth and remodeling, and the response to mechanically based clinical interventions or traumatic injury, but there are currently conflicting reports on this issue and the mechanical properties of intact esophagus have not been rigorously addressed. This paper offers multiaxial data on rabbit esophagus, warranted for proper identification of the 3D mechanical properties. The Fung-type strain-energy function was adopted to model our data for esophagus, taken as a thick-walled (1 or 2-layer) tubular structure subjected to inflation and longitudinal extension. Accurate predictions of the pressure–radius–force data were obtained using the 1-layer model, covering a broad range of extensions; the calculated material parameters indicated that intact wall was equally stiff as mucosa–submucosa, but stiffer than muscle in both principal axes, and tissue was stiffer longitudinally, concurring our histological findings (Stavropoulou et al., Journal of Biomechanics. 42 (2009) 2654–2663). Employing the material parameters of individual layers, with reference to their zero-stress state, a reasonable fit was obtained to the data for intact wall, modeled as a 2-layer tissue. Different from the stress distributions presented hitherto in the esophagus literature, consideration of residual stresses led to less dramatic homogenization of stresses under loading. Comparison of the 1- and 2-layer models of esophagus demonstrated that heterogeneity induced a more uniform distribution of residual stresses in each layer, a discontinuity in circumferential and longitudinal stresses at the interface among layers, and a considerable rise of stresses in mucosa, with a reduction in muscle.

Biomechanical and histological characteristics of passive esophagus: Experimental investigation and comparative constitutive modeling

Information on the passive biomechanical properties of two-layered esophagus is still limited, although this would enhance our understanding of its physiology/pathophysiology and help to address problems in surgery, medical-device applications, and for the optimal design of prostheses. In this study, rabbit esophagi were excised and dissected into mucosa–submucosa and muscle layers that were submitted to histological quantification of elastin and collagen content and orientation, as well as to inflation-extension testing and geometrical analysis, i.e. delineation of the zero-stress state serving as a reference configuration for biomechanical analysis. The pressure–radius data of both layers displayed a monotonically rising slope with inflating pressure, unlike the sigma shape characterizing elastin-rich tissues, for which biphasic constitutive models were initially postulated. Three phenomenological expressions of strain-energy function (SEF), commonly appearing in soft-tissue biomechanics literature, were used in an attempt to model the pseudoelastic response of esophageal tissue, namely the exponential Fung-type SEF, and the combined neo-Hookean (isotropic) or quadratic (anisotropic) and exponential Fung-type SEF. Accurate fits were attained for the pressure–radius–force data, spanning a wide range of longitudinal stretch ratios, when using the exponential form; the biphasic SEFs failed to generate improved fits, being also over-parameterized. According to the calculated material parameters, mucosa–submucosa was stiffer than muscle in both directions, justified by our histological observation of increased collagen content in that layer, and tissue was stiffer longitudinally, substantiated by the increased elastin and collagen contents and their preferential alignment towards that direction. Our results demonstrate that the passive response of esophagus is best modeled with an exponential Fung-type SEF.